Database Info

Sprint Stock Rom with A2SD Support

This is the latest Sprint Rom based on the latest RUU leak with A2SD support (I used Darktremor A2SD 2.7 since it was easy to add it).
I have verified that A2SD is working as I downloaded and installed a couple of programs from the market. The programs are being stored in /system/sd/app.
Here's the link: http://www.darktremor.info/files/2.1/2.1-ruu-a2sd-signed.ziphttp://www.darktremor.info/files/2.1/sprintstock-21-a2sd-b-signed.zip
This one now has adb rooted (thanks to nfinitefx45 for his assistance) and does flash (heard complaints on the symlink issue...never sure what causes that, but ended up starting over and porting the files from the previous build).
This is for those people who want to keep with the stock installation but want the addition of A2SD. If you want a customized look, faster performance and A2SD support, I suggest a custom rom. Fresh 2.1.2 or FreshToast is a good one to use.
Note: It will not affect recovery.
Enjoy and I'll answer any questions you may have (if I can answer them).

did you manually edit the init.rc? and you should mention that this is a ROM, not an RUU

tkirton said:
This is the latest Sprint RUU leak with A2SD support (I used Darktremor A2SD 2.7 since it was easy to add it).
This is definitely an RUU as when I go into adb shell, I get the dollar sign as a prompt rather than the pound sign...I'm pretty certain it is not rooted.
.
Click to expand...
Click to collapse
<<<snip>>>
This makes no sense at all.

Good point about the Rom vs RUU. Edited to correct.
As for the init.rc. Mainly it was init.rc edit.
regaw_leinad said:
did you manually edit the init.rc? and you should mention that this is a ROM, not an RUU
Click to expand...
Click to collapse

Don't look at me...that's what I'm getting. Doesn't make much sense to me, either. I just know if I do adb shell, I don't have root access. But A2SD works fine.
I went ahead and released it since the goal was to get A2SD working...and I did that. Everything else is for a Rom developer.
wctom said:
<<<snip>>>
This makes no sense at all.
Click to expand...
Click to collapse

tkirton said:
Don't look at me...that's what I'm getting. Doesn't make much sense to me, either. I just know if I do adb shell, I don't have root access. But A2SD works fine.
I went ahead and released it since the goal was to get A2SD working...and I did that. Everything else is for a Rom developer.
Click to expand...
Click to collapse
Thanks, I'll just use your boot image for RegawMOD 2.5. saves me a few minutes

working perfectly all apps installed and 132 megs still open internal
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

sandboxlove said:
is it a general consensus that if you want to run a2sd successfully you should use a class6? i currently have a class4
Click to expand...
Click to collapse
right now, I switched back to my class 4 and its working great

nvmchars....

tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework

sandboxlove said:
i just want to be clear...this is the latest sprint leak? you seriously deodexed the whole thing?
i thought vince was crazy for trying, your completely BANANNAS
Click to expand...
Click to collapse
yeah, i thought I'd post it in here. Didn't think since it's the same thing as he posted but deodexed that I should make another thread.
and yes, the latest sprint leak. you should test this. I can't right now.

Oooh...cool. Enhancements. I like enhancements.
regaw_leinad said:
tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework
Click to expand...
Click to collapse

tkirton said:
Oooh...cool. Enhancements. I like enhancements.
Click to expand...
Click to collapse
Well, I like your work, so that's for you
did anyone test it out to make sure it boots?

Sorry to be such a noob, but what is "deodexed" a ROM mean?
regaw_leinad said:
tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework
Click to expand...
Click to collapse

Well I flashed it and stuck on the HTC screen. Flashed the non deodexed version and loads fine.

So apparently i f***ed up deodexing lol. I guess that ROM that I did wont work..

well just loving this rom, but one question, can we get a updated boot.img with the adb enabled for access as root?

Now that the A2SD stuff is behind me, I'll take a look at that. Flipzmode or Toastcfh may be able to shed some light on how you get this image rooted correctly, especially Flipz since he's using the latest leak for Fresh 2.1.1.
The original goal was to get A2SD working on a stock rom, which I did....but it is rather annoying that it isn't rooted (or fully rooted).
Damage said in his point that it was rooted, but I got the same thing you did...no root when doing adb.
I'll talk to Flipz or Toast and see if they can point me in a direction to go.
nfinitefx45 said:
well just loving this rom, but one question, can we get a updated boot.img with the adb enabled for access as root?
Click to expand...
Click to collapse

well this is a piece from some of the reading I've been doing I beleice this needs to be done with in the boot image. I dont know if this will help in your research,
-------------------------
You also need to modify the ROM update script to change the default permissions for /system/bin/su so it can be used to elevate privileges to root. The script is in $WKD/dst/META-INF/com/google/android/update-script. Open it in your favorite editor and find the line starting with set_perm 0 2000 0550 SYSTEM:etc/init.goldfish.sh and after it add the following set_perm 0 0 04755 SYSTEM:bin/su
=======================

Hi tkirton,
Nice job on this and thanks for all your hard work on everything! I am also wondering what dedoxed means? Is it like where application data is also stored on the SD card instead of on the phone itself?
Thanks!

[Temp] Fix for missing apps on froyo

in your build.prop replace the current text with this: you can get things like tv.com back
Code:
ro.build.description=passion-user 2.2.1 FRG83 60505 release-keys
ro.build.fingerprint=google/passion/passion/mahimahi:2.2.1/FRG83/60505:user/release-keys
i would upload one for people to flash but as some many people are on diff roms/kernels it would just cause more issues then its worth best way to go about fixing it is pulling the file from your phone (or the zip from teh rom your on). swapping out the text and pushing it back to /system
all credit goes to Decad3nce for the fix

Didn't s work for me...
Sent from my SPH-D700 using XDA App

you may have to reboot

Worked for me! Thanks.
Sent from Froyo!

Thanks worked great!!

shabbypenguin said:
in your build.prop replace the current text with this:
Click to expand...
Click to collapse
Wouldn't you like to be more specific? Your current instructions technically mean to replace the entire file with just those three lines...
Sent from my SPH-D700 using XDA App

Please note that users of Quantum Rom already have this fix applied, since 1.3
(Used the epic 2.1 key in 1.3, 1.4+ use the nexus one key)
Thanks shabby xD
Sent from my SPH-D700 using Tapatalk

Here's what I did from my PC with adb. (I have adb in my PATH so adjust the commands for wherever you might have adb.exe)
adb pull /system/build.prop
Then I edited the 2 lines on my PC with notepad++ and saved. Then I put it on my sdcard, remounted /system readwrite and copied it over to /system/build.prop and then rebooted.
adb push build.prop /sdcard/build.prop
adb shell
su (if your ROM didn't already drop you in to root, and check your phone for the superuser popup)
mount -t rfs -o remount,rw /dev/block/stl9 /system
cat /sdcard/build.prop > /system/build.prop
reboot
Sent from Froyo!

didnt work for me. I been trying to get the PayPal 2.2 to show up on the market but its a no go.
Im using Froyo also.
anyway we could just get the paypal.apk??

This didn't work for me either. Trying to get Pocket Blu installed, but it isn't working. TV.com isn't showing either. FWIW I have the new Market app if that means anything.
Any ideas?

Milkman00 said:
This didn't work for me either. Trying to get Pocket Blu installed, but it isn't working. TV.com isn't showing either. FWIW I have the new Market app if that means anything.
Any ideas?
Click to expand...
Click to collapse
Did you reboot your phone?

yes, and after rebooting a rechecked my build.prop file to make sure it took, and it was correct

Nevermind, I got it to work...
The end of the second line was missing the s. Put the s in, and it works perfect.

Can I get some clarification on this? I am using Mammon 1.0.3.1 and cannot get my sprint football ap to work.
Would this be an example of what this would fix?

Could the MSID number in my phone being different from my phone number be the reason it doesn't think this is a SPrint phone?

Thanks for posting a fix but it also didn't seem to work for me. I have been trying to load a program called Laser Appraiser from maket with no avail. Can anyone find it in their market?

worldlyinquirer said:
Thanks for posting a fix but it also didn't seem to work for me. I have been trying to load a program called Laser Appraiser from maket with no avail. Can anyone find it in their market?
Click to expand...
Click to collapse
Laser Appraiser shows up for me.

Milkman00 said:
Laser Appraiser shows up for me.
Click to expand...
Click to collapse
Thanks, Hmm I think I'll just wait for the latest froyo release and see if that helps

I tried downloading it and saving it to my SD card, but it's a protected app. I use AppMonster, which backs up all the apps for when I do flashing, but it doesn't do protected ones. Sorry man, I tried.

sorry i havent replied, most of the roms out there SHOULD have this baked in... i know acs and quantum do and the cm rom should but ill ask noob just to be sure.

[SCRIPT] D3xopt "dexopt-wrapper" script

For reference. http://forum.xda-developers.com/showthread.php?t=561579
Advantages:
jubeh said:
...there are two latent benefits to having odexed apps; decreased usage of dalvik-cache (thus, more space in /data) and decreased first-boot time after a wipe.
Click to expand...
Click to collapse
Disadvantages:
jubeh said:
The disadvantage of odexed apps is that, unless the classes.dex is kept inside the .jar or .apk, the app and framework are bound to each other (though an odexed framework can still be used under a full set of non-odexed apks, but not the other way around). This removes mix-and match, and it was the reason why I was waiting for a more current hero-dump that didn't have all it's apps and frameworks odexed...
Click to expand...
Click to collapse
This is just something quick that I threw together after i was asked some questions regarding creating .odex files and the entire dexopt mechanism.
I searched for scripts that allowed me to do this quickly but I only found half assed ones that really didn't fit my needs.
So here's a rough preview of the script: http://pastebin.com/PKxvzMmR
How it works:
After you flash the update.zip below, you'll have both the d3xopt.sh script and the dexopt-wrapper binary. You'll then simply jump into shell
Code:
adb remount
adb shell
and type "d3xopt.sh" and it'll spout out a brief overview of the script:
Code:
Clearing dalvik-cache
Directions:
This script allows you to create .odex files
to optimize dalvik runtime
How to use:
FR - Framework
SA - System Apps
ALL - Framework/System Apps
WARNING! WARNING! WARNING!
DO NOT DEXOPT SYSTEM APPS THEN FRAMEWORK.
ALWAYS DEXOPT FRAMEWORKS THEN SYSTEM
APPLICATIONS.
WRONG ORDER WILL RESULT IN ANDROID
RUNTIME ERRORS.
WARNING! WARNING! WARNING!
Example: d3xopt.sh FR creates the .odex files for core.jar, ext.jar, framework.jar, android.policy.jar, and services.jar in boot order as to not create any problems with runtime. This follows the order set forth by Jubeh here.
I did put in a few 'checks' that will stop the script from running. Right now it's just rough. (checks for Phone.odex and core.odex before initializing, if present, it exits).
Make sure that you nandroid before you run this script, that way, when you get a spam of force closes, you don't have to cry yourself to sleep.
jubeh said:
Also, be sure that if you want to keep an app's ability to be upgraded, don't odex it (actually, don't even have it in /system, toss it to /data/app)
Click to expand...
Click to collapse
Download Here: http://www.4shared.com/file/gz0eJdeY/D3xopt.html

Gonna try it right now on jaybob's Dec17th BlackMod, Thanks Deca!
LOL @ Spam of FC's! I got them, about 30 of them, and they keep coming back! Did I do it wrong or what? It cleared Dalvik, then I tried entering cmd's but none worked, entered FR and got nothing????
OK I figured it out
d3xopt.sh FR
Looks like most if not all the Apps failed... Rebooting now
It did boot up but FC for everything Nandroiding back...

cordell12 said:
Gonna try it right now on jaybob's Dec17th BlackMod, Thanks Deca!
LOL @ Spam of FC's! I got them, about 30 of them, and they keep coming back! Did I do it wrong or what? It cleared Dalvik, then I tried entering cmd's but none worked, entered FR and got nothing????
OK I figured it out
d3xopt.sh FR
Looks like most if not all the Apps failed... Rebooting now
It did boot up but FC for everything Nandroiding back...
Click to expand...
Click to collapse
try odexing on a fresh install before installing anything, also the fc's after the script runs will happen atleast if its anything like the other odex script i used on the vogue, also clearing the dalvik cache AFTER the script runs wont do too much since the dalvik cache gets emptied by the odexing process

Also before you run the script make sure you have atleast 15% of system space left or bad things can happen, and like the Op said is more than a few words, once its odex'd you can never theme it
Sent from my HERO200 using XDA App

Yeah, I dont have much space due to fierats. The dalvik cleared first, I was just out of order on my posting I do to much with themes on phone for this. I didnt see that it wouldnt work, or cause themes in future from working. Boredom, see a new thing and I wanna try it! Anything that can help the Hero is worth a shot

Yea dzo posted a thread about it in the vogue forums, the OP here doesn't exactly say it here but its true and yea FR could cause a problem
Sent from my HERO200 using XDA App

When flashing the zip from recovery, the whole /system/bin/ directory is chmod to 0755 permissions. This causes problems with apps which need superuser permissions. It took me more than a day to figure this out...

Joskevic said:
When flashing the zip from recovery, the whole /system/bin/ directory is chmod to 0755 permissions. This causes problems with apps which need superuser permissions. It took me more than a day to figure this out...
Click to expand...
Click to collapse
herp derp, fail on my part. Took the lazy route and just recursively changed permissions on flash instead of just doing it for the individual files. My bad.

Decad3nce said:
herp derp, fail on my part. Took the lazy route and just recursively changed permissions on flash instead of just doing it for the individual files. My bad.
Click to expand...
Click to collapse
Think you can make an updated version of it to use on my nook? I think odexing one of the nightlies would be pretty awesome
Sent from my PC36100 using XDA App

thoughtlesskyle said:
Think you can make an updated version of it to use on my nook? I think odexing one of the nightlies would be pretty awesome
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I would love an update too, odexing aospCMod would be awesome.

thoughtlesskyle said:
Think you can make an updated version of it to use on my nook? I think odexing one of the nightlies would be pretty awesome
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
il Duce said:
I would love an update too, odexing aospCMod would be awesome.
Click to expand...
Click to collapse
Sure, just need to revise the odexing order for gingerbread. Stuck doing homework right now but I'll have some time later this week.

Decad3nce said:
Sure, just need to revise the odexing order for gingerbread. Stuck doing homework right now but I'll have some time later this week.
Click to expand...
Click to collapse
Also how would I run this via terminal, for some reason my nook isn't recognized via adb
Sent from my PC36100 using XDA App

thoughtlesskyle said:
Also how would I run this via terminal, for some reason my nook isn't recognized via adb
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I was just about to chip in with the same question, I've got a Flytouch 3, we also can't get into ADB via the usb port, if we could run this script as a stand alone working off a directory with the files on a PC it would be extremely useful

hey Deca, wondering if there is a way to use this for /data/app ? I have evo3D now, LOTS of apps, and it boots wicked slow :/

Hi did this ever get updated for GB ??
Very good idea, hope it can work on modded roms.
Thanks.

Dead Link?
Hi dead Link??! Need it for Dev purposes??

Decad3nce,
the link is dead, can you upload the script again ?
thanks

[Script] Darkness in the dark hours

hi everyone
I present to you:
Darkness in the dark hours​
this is a pack of:
- a script I made
- Gscript lite
- Screen filter(optional, but recommended)
I strongly recommend to you to read the whole post and only then apply my script!
A lot of users tried to find a way to do this, so I polished my script I used for Eternity to make it universal(hopefully )
this script made to work with rooted 2.1+ firmwares and busybox properly installed.
1. Install Gscript lite
2. To make this script revertable on the newer brand of kernels, you will need to add one line to hw_config.sh (because I just don't trust init.d scripts)
run this from adb or any terminal emulator from phone as superuser
Code:
echo "\n\n\nrm /data/noled_tmp_reverse.prop" >> /system/etc/hw_config.sh
3. in Gscript choose Add a script and name it whatever you want(e.g. NOLed) and paste these lines in it
Code:
#! /system/bin/busybox sh
# "turn off keyboard and notification LEDs" for ANY android firmware
# this script needs su access
# made by Adolf1994
# thanks for the help diimaan
# maybe final version - revertable
# requires hw_config.sh modification to be properly revertable
DIR=$(cd /sys && find | grep brightness | cut -c 3- | cut -d : -f 1 | head -n 1)
LED=/sys/$DIR
LED1=$LED:rgb1:red/brightness
LED2=$LED:rgb1:green/brightness
LED3=$LED:rgb1:blue/brightness
LED4=$LED:sled/brightness
if [ -s /data/noled_tmp_reverse.prop ]; then
chmod 00644 $LED1
chmod 00644 $LED2
chmod 00644 $LED3
chmod 00644 $LED4
rm /data/noled_tmp_reverse.prop
else
echo 0 > $LED1
echo 0 > $LED2
echo 0 > $LED3
echo 0 > $LED4
chmod 00444 $LED1
chmod 00444 $LED2
chmod 00444 $LED3
chmod 00444 $LED4
echo 1 > /data/noled_tmp_reverse.prop
fi
exit
4. tap on "Needs SU" then save
5. run the script and enjoy surfing at night without the annoying hw leds
(most likely you WILL get stderrs on 2.2+, but it's normal)
Note: if you get EMPTY stderrs, that's no problem. BUT if something is shown next to the stderr, like permission denied, then please report
optional. install Screen filter from market: https://market.android.com/details?id=com.haxor&feature=search_result
This is only for 2.1 and/or 2.2. On 2.3 I experienced a problem that's I couldn't press install in package installer activity. I nearly reinstalled the whole thing. You've been warned!
Night is over? Just run the script again and wait till the LEDs light up.
If You Don't Like LEDs At All, This Pretty Line Will Disable Them At Startup
http://forum.xda-developers.com/showpost.php?p=17514012&postcount=27
Q: Why modifying hw_config.sh?
A: Because if you reboot your phone while the leds are off, there will remain a file that normally indicates how the script should act upon running it. That one particular file should not present after boot.
Q: I'm on Wolfbreak's ROM. Won't that mess tweaks up?
A: In no way. Impossible. Unless you didn't follow steps properly.
hope you like it
and don't forget to press thanks button

can I use script manager to run this at boot?

I think it'd be fine

the script didnt work for me i went to my dolphin browser copied text pasted it saved i run it it showed up stderr twice that's it?

shahkam said:
the script didnt work for me i went to my dolphin browser copied text pasted it saved i run it it showed up stderr twice that's it?
Click to expand...
Click to collapse
i cant paste the text corectly ffs i think thats the problem can you upload the script as ".sh" so i can load it whit gscript?

shahkam said:
the script didnt work for me i went to my dolphin browser copied text pasted it saved i run it it showed up stderr twice that's it?
Click to expand...
Click to collapse
from gscript I get a bunch of stderrs, too. however, from a terminal emulator it runs fine, so no problem.
It's the most noticeable if the phone is on the charger, because you will see that the led suddenly switches off.
you can revert the script back with a simple reboot.

Sorry for being a noob, but what does this do? :$

It disables the l.e.d.s. It should be made a little clearer in op.
Is there a script to turn them back on?
Sent from my X10a using XDA App

AyDee said:
It disables the l.e.d.s. It should be made a little clearer in op.
Is there a script to turn them back on?
Sent from my X10a using XDA App
Click to expand...
Click to collapse
sorry if I wasn't clear. I'll fix it soon
and change it to revertable, too

Adolf any clue why it didnt work.for me and i kept having stderr thingy
Sent from my X10i using XDA Premium App

shahkam said:
Adolf any clue why it didnt work.for me and i kept having stderr thingy
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
since they are empty it's ok

Huh? I think i wasnt clear i used your script and when i ran it whit gscript i got twice stderr message twice one under the other like this
Stderr
Stderr any clue why?
Sent from my X10i using XDA Premium App

shahkam said:
Huh? I think i wasnt clear i used your script and when i ran it whit gscript i got twice stderr message twice one under the other like this
Stderr
Stderr any clue why?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
for this script only gscript gives empty stderrs. if I run it with a terminal emulator/adb there's no stderr.
it's a problem of gscript

@Adolf or @My_Immortal
any new experiments with sd card mounting?
There was some interesting posts by one shaun in link2sd thread! he's using x10! somehow he managed to find more free space in /system than in /data!
so no need of an extra partition, you can just run the script to mount the /system as rw on boot and then link the link2sd mount point to it! I sent a PM to him about how is it working! let's see...

Ohhh but i tried terminal too pasted the script and nothing happened?
Sent from my X10i using XDA Premium App

I use this script most nights now, thanks Adulf! perhaps a mod to the script could be to set an expiry time value? (or is this not possible!)

diimaan said:
@Adolf or @My_Immortal
any new experiments with sd card mounting?
There was some interesting posts by one shaun in link2sd thread! he's using x10! somehow he managed to find more free space in /system than in /data!
so no need of an extra partition, you can just run the script to mount the /system as rw on boot and then link the link2sd mount point to it! I sent a PM to him about how is it working! let's see...
Click to expand...
Click to collapse
There are currently 190 MB free in my system partition, 219 MB in data and 11 GB in my sdcard, so I really want to use Links2SD on an ext partition in my SD, rather than anywhere else!
But it's nice that there's progress!!

My_Immortal said:
There are currently 190 MB free in my system partition, 219 MB in data and 11 GB in my sdcard, so I really want to use Links2SD on an ext partition in my SD, rather than anywhere else!
But it's nice that there's progress!!
Click to expand...
Click to collapse
190 mb? that's far less you should clean up some junk in your system then!
btw this is the msg I got from shaun! you can check how it works!
http://forum.xda-developers.com/show...&postcount=834
Should explain how to do it, just need to add commands to a start up script that is editable on your phone, that runs before the GUI is started. Dunno how I would create a universal script as you will need to edit diff files on diff phones.
If there is anything you don't understand from my post I'll try and help.
Click to expand...
Click to collapse

Brilliant this is exactly what i wanted, thanks Adolf !!

[email protected] said:
I use this script most nights now, thanks Adulf! perhaps a mod to the script could be to set an expiry time value? (or is this not possible!)
Click to expand...
Click to collapse
Adulf... hehh, funny
yyeeeeaaaaaaahhhh...no
that'd be a bit complicated.
but this is why it's revertable

[DUMP] STOCK AT&T deodexed/zipaligned ICS

Here is a dump of my /system/app and /system/framework that is deodexed/zipaligned. Its just the directories; its not flashable in CWM. I'll try and put together a stock zip later, but I don't have time at work. If someone else wants to do it, feel free to PM me a link and I'll host it.
For now, developers will know how to use this. In addition, if you feel brave, you can use the following steps:
Prework:
Download the zip. Extract it. Copy the deodex_app and deodex_framework directories to your external SD card.
1) Boot your phone into recovery
2) Mount /system and /sdcard from the mount menu
3) adb shell rm /system/app/*.odex
4) adb shell rm /system/framework/*.odex
5) adb shell cp /sdcard/deodex_app/* /system/app/
6) adb shell cp /sdcard/deodex_framework/* /system/framework/
7) adb shell chmod 644 /system/app/*
8) adb shell chmod 644 /system/framework/*
9) Wipe Dalvik cache from the advanced menu
10) Make sure /system, /data, and /sdcard are unmounted in the mounts menu
11) Reboot. It took about 5 minutes for my phone to boot and then it said "Upgrading Android" or something like that and went through 175 apps or so.
Download here.
ROM developers, feel free to use this to base your ROMs on. Please give credit for the base source of your ROM as always.
Edit: Clarified its also zipaligned.

Awesome!! I wish I was brave enough to try this..

So rom does this mean you'll be whippin up a kernel?? : ))))))
Sent from my SAMSUNG-SGH-I727 using xda premium

pingfl00d said:
So rom does this mean you'll be whippin up a kernel?? : ))))))
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I need the source which is not available yet. I suspect it will be shortly after this is OTA'ed. But yes, once it is, I will be updating my stock-ish

Procedure works perfectly.
At "Android is upgrading... " message now
Edit: Home button dead.

rjohnstone said:
Procedure works perfectly.
At "Android is upgrading... " message now
Edit: Home button dead.
Click to expand...
Click to collapse
My home button works fine. This seems to be a common problem if you restore with TiBu. Did you do that?

romracer said:
My home button works fine. This seems to be a common problem if you restore with TiBu. Did you do that?
Click to expand...
Click to collapse
Only user apps, no system data.
And the button worked prior to replacing files, so I'm curious what was deleted/changed that caused the button to stop working?

rjohnstone said:
Only user apps, no system data.
And the button worked prior to replacing files, so I'm curious what was deleted/changed that caused the button to stop working?
Click to expand...
Click to collapse
My guess would be something that "Android is updating..." did. I'm still not entirely sure what that is doing.

romracer said:
My guess would be something that "Android is updating..." did. I'm still not entirely sure what that is doing.
Click to expand...
Click to collapse
Most likely... no biggie.
Factory reset should take care of it.
Worst case, I have a nandroid backup.
Edit: factory reset didn't fix it... time for a restore.

I will try and add this too a zip. Thank you
EDIT:
I added this to my ROM. I am still working on ironing out all of the issues, but this helped!
http://forum.xda-developers.com/showthread.php?t=1566820
And if you want to mirror that would be amazing.

that actually worked perfectly! although you should probably add in there that people can use emmc instead of sdcard if they dont have an external card (i dont).

Thanks for this.
Sent from my SAMSUNG-SGH-I727 using xda premium

thanks
I waiting for .Zip flasheable

if you don't mind me asking, how did you come across deodexing this rom? I know others were having troubles doing so. Also how did you zipalign it? I zipaligned my leak by using rom toolbox pro, did you use the kitchen?!?!

Thanks romracer, always run into issues with the kitchen. I'm going to try your classpath includes in a sh script and see if it works where the kitchen hadn't.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2 Beta-4

mjwhirly said:
if you don't mind me asking, how did you come across deodexing this rom? I know others were having troubles doing so. Also how did you zipalign it? I zipaligned my leak by using rom toolbox pro, did you use the kitchen?!?!
Click to expand...
Click to collapse
I do most of it by hand. I'm a Linux/Windows System Administrator by day, so I'm comfortable with the command line I do use Cygwin for just about everything though rather than the Command Prompt.

promiseofcake said:
Thanks romracer, always run into issues with the kitchen. I'm going to try your classpath includes in a sh script and see if it works where the kitchen hadn't.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
The one liner I pasted in the other thread should work for both app and framework. It has more includes in the class path than are necessary for framework, but I don't think it'll break it.
It assumes the following:
You are in a directory with app, framework, deodex_app, deodex_framework and tmp subdirectories. app and framework contain the originals from the phone. The one liner should be run from this top level directory. I'd recommend doing framework first. You'll also need to Google java.awt.jar and put it in the framework directory too. Don't upload this to your phone though, its just needed for deodex'ing.

finally abit stable with these deodexed files
flash ics leak through odin
boot into android and get past the attready2go
flash cwm through odin
copy your deodexed files to sd and boot into cwm
follow your adb commands to copy and replace
reboot
only problems were superuser being a pain to flash in cwm. someone else mentioned toggle signature verification which is just before choosing your zip to install in cwm. looks good now.

mjwhirly said:
if you don't mind me asking, how did you come across deodexing this rom? I know others were having troubles doing so. Also how did you zipalign it? I zipaligned my leak by using rom toolbox pro, did you use the kitchen?!?!
Click to expand...
Click to collapse
i think the problem most people are having isnt related to the deodexing (anymore) but trying to flash it in CWM. it seems that flashable zips are messing up everything, as i used the same files i tried flashing in a zip this way and it works now. the zip version was unusable.

quikt said:
finally abit stable with these deodexed files
flash ics leak through odin
boot into android and get past the attready2go
flash cwm through odin
copy your deodexed files to sd and boot into cwm
follow your adb commands to copy and replace
reboot
only problems were superuser being a pain to flash in cwm. someone else mentioned toggle signature verification which is just before choosing your zip to install in cwm. looks good now.
Click to expand...
Click to collapse
That's basically exactly what I did (and my phone seems stable). Thanks for typing out the parts I left out
I've always had to flash the Superuser zip twice for some reason. I just flash it twice right on top of each other (without rebooting, exiting CWM, etc). Never have any problems in the actual OS doing it that way.
Grab the official Superuser zip from goo-inside.me/superuser