[Q] - Acer Liquid mt problems after rooting - Android Software/Hacking General [Developers Only]

I've been trying to get the Super One Click Shell Root to work on my Acer Liquid mt, I'm quite familiar with adb and all, but I get a pop-up message that says the phone already has a temporary root. Restarting doesn't fix the problem like it says. This has most likely happened because when I first tried rooting I used the temporary root, however half way through it came across a bug and simply stopped. I was wondering if you would have any tips on how to get my phone entirely back to factory settings? As now the phone randomly freezes with the only solution being to press the hard reset button.
I have already tried vache's recovery, and also Acer's Euu Packet. I even tried resetting the whole phone by holding the 2 volume buttons on start-up. Everything worked how it was supposed to, however none of them fixed the problem. Any help would be great
Regards,
Haydn
Edit : Not entirely sure if I have posted this in the right place :S

Related

[Q] Stock w/ root question.

I got the device two days ago and rooted it the night I got it but remained stock to get use to it a little (came from MT4G) and still not use to the lack of physical menu buttons.
Anyways, after rooting and going through the process CWM, SU, ect. everything looked good for a while but today I had two random reboots from locked screen (went to unlock the device and it rebooted, the same way both times but not full reboots they were short and quick) and I was wondering if anyone else had this same issue and if so how to correct it.
There was another thing, when I boot into recovery it loads fine but when I reboot back to ROM it says there was an improper boot and wanted to send crash log to HTC. Not sure if this is going to be the normal thing but if anyone else is having this every time they go into recovery is there a way to opt out of it by default?
Thanks for reading.....
Orical said:
I got the device two days ago and rooted it the night I got it but remained stock to get use to it a little (came from MT4G) and still not use to the lack of physical menu buttons.
Anyways, after rooting and going through the process CWM, SU, ect. everything looked good for a while but today I had two random reboots from locked screen (went to unlock the device and it rebooted, the same way both times but not full reboots they were short and quick) and I was wondering if anyone else had this same issue and if so how to correct it.
There was another thing, when I boot into recovery it loads fine but when I reboot back to ROM it says there was an improper boot and wanted to send crash log to HTC. Not sure if this is going to be the normal thing but if anyone else is having this every time they go into recovery is there a way to opt out of it by default?
Thanks for reading.....
Click to expand...
Click to collapse
If you boot into recovery or hard reset by holding the power button. It will always ask to send crash report
OK cool so it's normal, thanks for the information.

[Q] I think my XOOM is possessed, HELP!

I want to start out stating that i am very familiar with android's but have never experienced anything like this.
The first thing I tried was to oem unlock it from fastboot, which it claimed to do however i am skeptical as nothing else seems to stick, attempted to install cwm and TWRP neither with any success, even though it says the action was performed successfully.
The strangest thing is that i deleted all the apps on the device from settings/app, but when i rebooted my device they all came back!
All i wanted to do was do a factory reset, which also claims to finish successfully but after rebooting from recovery mode, i am back where i started.
App Updates also do not work as every time the tablet reboots, the apps have to be re-updated.
Its like the tablet is stuck in a read only state and when it reboots all changes are lost.
Like i said, this thing is acting weird and i have no idea where to go from here. Any help would be greatly appreciated!
[Update: Tried RSDLite, same results, Result is PASS however after system reboot everything is the same.]
Another update, tried downloading HWI69 which is the stock rom, tried to fastboot each image but nothing sticks even though it seems to say it writes it to the system. I'm starting to think the NAND memory is locked up and cannot be written to anymore if that's even a possibility.
BUMP

[Q] TF300T stuck on TWRP loading screen

Hello guys, i have been reading the forums for a long time now and it's finally time i registered to ask you about a problem of mine.
I purchased a TF300T around two months ago and it was already unlocked from the previous owner. I went straight ahead and installed TWRP and CM 12.1 (nightlies) on it. Everything was working fine, i could update to newer versions of the nightlies (only problem was that if i updated them through the system the downloaded update was giving me an error).
For some days now the tablet had been really slow and so i thought i would factory reset it in order to empty it and be like new. I went into settings>backup and restore>factory reset (if i remember correctly). It restarted my tablet and tried to boot into recovery. I see the teamwin logo but nothing happens and every 20-30 seconds the screen just blinks for a brief second. I also tried to use adb reboot bootloader but nothing was happening. I can't get into the bootloader neither this way or by pressing the buttons on the tablet.
Do you think i have probably bricked it somehow? What would you reccomend me to do in order to fix it? If there's any more info you want I'd be glad to answer.
Thanks for your time everyone!
Edit:
After a lot of searching i finally was able to restore my tablet and it now works fine. I used these guides to fix it and i'm linking to those in case anyone in the future finds this post.
http://forum.xda-developers.com/showthread.php?t=2528976
http://forum.xda-developers.com/showthread.php?t=2403674

Softbricked G Flex 2 freezing at start. Boots but unable to start.

Hi everyone.
I have an LG G Flex 2 (H955) that suddenly went on a fritz. It used to be rooted fine, it was on default firmware, 10 something (wouldn't OTA due to rooting), no issues, but as I am a heavy user, enabled multiuser, had a bunch of apps installed and running it started to slow down on occasion, but nothing unexpected. Anyway, few days back, it shut down on its own while I was typing a message and the phone entered bootloop - on it's own. I decided to cut my losses and did the factory reset the hardware way, it booted up, did the "optimizing apps thing", got to welcome screen and - froze - then just restarted. It's been doing that ever since. Sometimes it boots all the way and then freezes and starts, sometimes it gets stuck on LG logo, sometimes even boots and works for a minute or two but still freezes and reboots.
I can access Download mode, and HW factory reset. I flashed several stock ROMs I found with LG flash tool 2014. It goes without a hitch, boots up, again gets to the welcome screen and reboots. I tried to to the dd cmd way to flash the only system.img I found online, but I get a security error at boot. It gets fixed when I flash the stock ROM again with flash tool. I am at my wits end. I have no warranty, I have no backed up original dump. With my limited knowledge I have somewhat of a hunch that one of the partitions might be corrupted as it boots most of the time but as it tries to write or read something from somewhere (hence showing the Welcome screen) it dies.
Would anyone have a suggestion as to what I might try next, or had a similar experience?
Thank you all very much in advance for any help.
Have you tried this tool with the appropriate image?
http://forum.xda-developers.com/g-flex2/general/p-restore-recovery-to-stock-tool-h950-t3171550
Hi and thanks for the tip. However, no, I have not tried this method as my device is H955, International version, and I am not keen on messing up the phone worse then it already is.
I will look it up in more detail, but as far as I can see it only pertains to the H950 (ATT version)
Edit: I looked it up in detail, and the developer removed the H955 support as there is a KDZ for it and he claims the .kdz is a much better option - however - .kdz does not work for me. It flashes the rom all right, both in Normal and CSE Flash modes, but the problem persists. Turns on (if I'm lucky), freezes, reboots and so on.
D'oh, didn't see the H955 part. :-|
Sorry to hear you are still stuck, can't offer much more unfortunately.
I know one of the flashing modes does a reset, but maybe a reset after the flash might help.. i think it's, from powred off, down plus power until the lg logo then release and then hold power on its own until you get to a recovery screen where you can reset.
you probably already tried that I'm guessing though. taken memory card out if you're using one?
thepktrckt said:
D'oh, didn't see the H955 part. :-|
Sorry to hear you are still stuck, can't offer much more unfortunately.
Click to expand...
Click to collapse
Don't worry about it, you tried to help, and I appreciate it
meangreenie said:
I know one of the flashing modes does a reset, but maybe a reset after the flash might help.. i think it's, from powred off, down plus power until the lg logo then release and then hold power on its own until you get to a recovery screen where you can reset.
you probably already tried that I'm guessing though. taken memory card out if you're using one?
Click to expand...
Click to collapse
Hi and thanks for yet another tip. However, you guessed right - I tried everything - reset from the recovery, before the flash, after the flash, in the middle of flash, with memory card, without memory card, tons of times - you name it, I've tried it. And still, it boots up (sometimes, though), freezes and go bye-bye. I'm completely out of ideas. If I could somehow rebuild partitions from Download mode, or use ADB, or push some image I found and flash it directly, but there is no way to push files to phone in Download mode (and 5.1.1. disabled external memory, so that is out of the option too).
It seems I'm stuck for now. I'm wondering if the repair guys have some tricks up their sleeves, perhaps with those hardware boxes, jtag something or other...
im on same boat with h955p, any solution?
the battery is the problem 100%. i had the same problem and i managed to fix it with buying a new battery and replacing it. 10$ on aliexpress plus you get the tools and it is really easy to replace.
hi. i was stuck in this situation. you can reflash the original stock rom back from LG UP software. at me this was the problem. my friend have a korean model and at him the 4g data connection was the problem...i was on the update of the marshmellow and freeze and reboot...factory reset didn't do something cool and keeps rebooting...but i was smart and lucky and my brain was thinking at the reflash of the phone...so i was to the reflash so my phone was completely and fully functional...no freeze , no reboot...and look for the v20a italy firmware (stock rom)...i say this because this v20a italy rom is so f***in stable and no battery drain...better than other stock rom marshmellow. Thanks me later.

Primux Sirico 2 issues

Hello everyone, I have lots of issues with this tablet since I bought it. It works painfully slow, yet resetting it doesn't change anything, still the same problem. I also tried to root it via Kingroot and it werk, however it took me lot of time due to the system being unresponsive / unstable and almost useless. It comes with android 4.0.3 and I also tried looking up for any possibilites to reinstall the firmware since I'm extremely sure it could be caused from the firmware it also got installed from the factory. I also tried searching for custom roms and other ways around for TWRP or any custom recovery, but no result. I also tried up with the Flashify app to try extracting / backing up / dumping the recovery and the kernel but the app freezes up. I also tried a possibility to update the firmware from their official page, hence it failed to do so since it gives an error in their flashing software that dosen't tell me nor it logs it what it could be caused up from the connecting part.
primux.es/producto/tablets/tablet-primux-siroco-2-101/189
(not sure if anyone understands spanish thought but I can translate if needed)
This is the page from where I tried to download and install their software and their firmware down below on the page. primuxcomputers.es/primux/siroco2upgrade.pdf
There are the instructions where I tried to follow but at the "Imagen 9: Icono" part got me stuck in there. It requests me to insert the cable in the tablet holding the "Home" button and while holding it, plugging in the USB cable throught PC, and tap quickly the "Power" button 3 times. However it gives me a red X icon and yet nothing shows up in the devices: No ID, no other kind of detection no logs no nothing. After it showed up the X on the status, it disconnects itself and it changes to ready / green icon and plugs itself in again but nothing really happens to detect it again thought.
I also tried to boot in recovery mode but nothing happens menawhile Flashify keeps on the rebooting in recovery mode in loop doing nothing else... I'm seriously in pain with this tablet. And if you ask me to return it, not gonna even bother doing that..
I seriously hope any answer very soon and don't get dissapointed by the ignorance of this topic..

Categories

Resources