[Q] G Tablet Hangup after Vegan Install - Android Software/Hacking General [Developers Only]

Hi Everyone. I installed the most recent build of Vegan downloaded directly from their website. I used clockwork mod and cleared the cache and the factory reset and all the fun stuff. It booted up properly once. I rebooted and now it just goes back and forth between the Viewsonic logo and the Powered by G-Tabdevs screen. It doesn't get any farther. I tried reinstalling Vegan again and didn't fix it. Anyone have any experience or guidance?

Bring the tab back to stock using nvflash, then reinstall vegan tab using clockworkmod.
Hope this helps.

Just my two cents.
I had a similar problem. When I flashed vegantab ginger it got stuck at the G-Tabdevs screen. I followed this guide to nvflash the tablet.
http://forum.xda-developers.com/showthread.php?t=861950
and then I followed this other one to reinstall clockwork mode and install the new rom:
http://forum.xda-developers.com/showthread.php?t=865245
BTW after flashing vegantab ginger you get a welcome screen where you set up your google account etc. After finishing remeber to rebbot your tablet.
Regards
P.

Related

[Q] Gtab bricked?

Hey guys I need some help! I had the clockwork .08 and vegan froyo builds installed. I wanted to install a new rom based on Gingerbread (the new vegan build), so first I installed the updated clockwork (successfully) then I put the vegan/gingerbread update onto the Gtab's internal memory (how i've installed all my roms and recoveries), and now its stuck on the first splash screen (white background with the birds and viewsonic spelled out); I try to reboot into recovery by holding the power up button while powering on but it just stays on the viewsonic splash screen! Can anyone help me "unbrick" my Gtab?
http://forum.xda-developers.com/showthread.php?t=861950
Here bro
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk

[Q] Problem updating to 5.0.0 TNT GTab

I'm new at this so I'll try to be as detailed with what I've done as I can;
So, I have a brand new View Sonic G Tablet fresh from the box and I updated it. Hated the interface and went straight to roebeet's 5.0.0 TNT Lite post and followed the instructions carefully. I upgraded to the 3588 build as to the requirements in order to put on the TNT 5.0.0, and waited for it to reboot after using the update.zip. Now I waited approximately one hour before realizing the tablet had frozen on the View Sonic screen with the 3 birds, so I restarted and tried to re-enter the recovery mode but now I'm stuck on the 3 birds screen with Recovery Key Detected in the top right.
*edit* I forgot to mention, even after restarting the device I cannot get back into the recovery mode at all and when I start up the device normally it just stays stuck on that View Sonic screen.
So now I'm stuck! Is there a way to fix it? I'm in the process of attempting the nvflash ad will report shortly back; however, I'd like some advice or if someone knows how to fix it I'd grately appreciate the help!
Woot!
Alright! After 4 hours of extensive research, I finally got the nvflash to work and I'm back to factory settings! I'm not sure how to remove my previous post but my problem is now resolved and if an admin/mod or someone who knows how to take a post down, take this thread down for me I would appreciate it

[Q] Bricked TF101

I had AOKP Build 29 installed on my Transformer and I decided I wanted to go back to stock so I attempted to flash the stock FW through CWM. I ended up with a CWM bootloop and like an idiot I didn't make a back up of my previous setup. So I tried flashing back to AOKP with the rom I had saved on the tablet and still got the same thing. I cleared data and tried flashing an old version on Android HD that I had on the internal SD card and that still didn't work. So I then figured I'd try flashing stock FW again....This is where things got weird. It seems that it only flashed the recovery. So now I'm stuck with stock recovery, but as soon as it boots into recovery I get the android w/! and ADB won't recognize it. I also tried doing an NVflash, but after I put the tab in APX mode and start the NVflash the tab disappears from my list of devices on my PC running windows 7 64bit. Any help to fix this will be awesome. The only thing I can think of is to uninstall the drivers and reinstall them to see if that fixes it.
I got a similar problem today. I put it to APX mode, start nvflash, it flashes the first images and when it starts flashing the bootloader my TF disconnects and turns off.
Please help!
Bump. Over 230 views and no ideas yet?
Sent from my Galaxy Nexus using Tapatalk 2

P6200 bricked - but sometimes boots and CWM OK?

Hi guys,
Really sorry to ask about this but tearing my hair out!
I have a P6200 UK model. I installed CWM v6.0.1.0 and it worked fine. The intention was to install Galaxy ROM HD (build #06), so I downloaded it, put it on my SD card, and installed from CWM recovery. The install got stuck on "Flashing boot" - so after around 15 mins I reset it.
It went into a boot loop on the initial Samsung logo. Luckily I'd previously re-flashed stock HC with Odin (to cure a dead Wifi problem caused by, I think, an errant install of Busybox) so I did this again, rebooted, and the system came up, text started scrolling up the screen, followed by a red error message (see picture) and a reboot. I was then once again stuck on the initial Samsung Tab 7.0 Plus log. I repeated the process and it didn't even get past the Samsung logo.
So I thought I'd try the newly released ICS Rom (GT-P6200_ATO_P6200XXLQ1_P6200OXALQ1) - this seemed to install OK, then half booted, did some text type installation stuff with the blue Android, then rebooted again, finally getting stuck on the Samsung logo with blue pulsating behind it. It never gets any further than that.
I tried flashing HC back - same result as earlier. I can also reflash CWM and sometimes it works, sometimes it doesn't. It seems I've run out of options.
So - question is - where (if anywhere!) can I go from here?
Help greatly appreciated, many thanks!
have you tried a system wipe in cwm? if not do a system wipe and reflash HC using odin.. same thing happen to me 2 days ago.. I think something is up with HD rom

Help me with the loop tab samsung tab 2 P5110

Hi
I'm having trouble with my tablet. From time to time it stopped on the recovery screen and I can not get back to using it
I tried to use the original rom flashed in odin successfully
I tried to flash ROM customized by CWM successfully
The only problem is that as soon as I finish putting the rom, I turn on the tablet, the android doll appears as if it would finish the installation and hang up. I turn the tablet back on and go straight to the recovery screen, I wipe, reboot and return to the recovery screen. I do not know what else to do. If it helps, before giving an error called charging_10 jpg and logo_espresso10.jpg, today it does not give more. If anyone can help me. Thanks in advance.
Raylane Cristina said:
Hi
I'm having trouble with my tablet. From time to time it stopped on the recovery screen and I can not get back to using it
I tried to use the original rom flashed in odin successfully
I tried to flash ROM customized by CWM successfully
The only problem is that as soon as I finish putting the rom, I turn on the tablet, the android doll appears as if it would finish the installation and hang up. I turn the tablet back on and go straight to the recovery screen, I wipe, reboot and return to the recovery screen. I do not know what else to do. If it helps, before giving an error called charging_10 jpg and logo_espresso10.jpg, today it does not give more. If anyone can help me. Thanks in advance.
Click to expand...
Click to collapse
I don't know what you got going on, but cwm is outdated. New ROMs require TWRP.

Categories

Resources