[Q] SPB Shell 3d - XPERIA X10 Themes and Apps

Hello,
Has anyone bought the new SPB shell 3d recently and tried it on a 2.2 custom rom? I'm considering to buy it, but I first want to know if it runs smoothly on cm6.1.3 by wolfbreak....

I'm with Wolf's cm 6.1.3 and it's running very smoothly

Yea it works well. Switching between screens lags just a little tho
Sent from my X10i using XDA App

hokaut said:
I'm with Wolf's cm 6.1.3 and it's running very smoothly
Click to expand...
Click to collapse
I can see only: "Your device is not supported"
What's wrong with it?

He said the new version 3d ...
not the "old" 3.5
I have read some comments about the new version on other sites ... ALL were without success
maybe an error of cracker

i have used sbp shell v5.0 on wolfs 6.1.3 rom and i had no lag at all

dannyj78 said:
i have used sbp shell v5.0 on wolfs 6.1.3 rom and i had no lag at all
Click to expand...
Click to collapse
yeah, but after reboot.... everythings going back to normal......

whitezboon said:
yeah, but after reboot.... everythings going back to normal......
Click to expand...
Click to collapse
1 - Install the apk (be shure it's the fixed one)
2 - Turn off all data connection
3 - Ensure you that the app is on the phone memory, and not on the sdcard
4 - Reboot and choose SPB as your default home
5 - Click "yes" on the activation box
6 - It <ill say you that your device is not compatible ==> Wait for 10sec and click OK
It should work. SPB shell is not laggy, it runs smooth and battery life is not that bad enjoy !

Koutch974 said:
1 - Install the apk (be shure it's the fixed one)
2 - Turn off all data connection
3 - Ensure you that the app is on the phone memory, and not on the sdcard
4 - Reboot and choose SPB as your default home
5 - Click "yes" on the activation box
6 - It <ill say you that your device is not compatible ==> Wait for 10sec and click OK
It should work. SPB shell is not laggy, it runs smooth and battery life is not that bad enjoy !
Click to expand...
Click to collapse
what he said lol

I get a black screen with SPB Shell 3d

Same here..
Sent from my SE_X10i using XDA App

maxpower1985 said:
Same here..
Sent from my SE_X10i using XDA App
Click to expand...
Click to collapse
You will get a black screen initially for about thirty seconds and then it begins to install.
I have it running on a X10a without major issues.

The installation is Ok, the problem comes after..
Sent from my [email protected]

Working great on my X10.
But the SPB is weak, I expected something better. :/

I get black screen and then after 10 seconds nothing happens.
any idea?

Did you guys bought the original one from the market or used a cracked version??
Sent from my X10i using XDA App

Anyone got the download link for 3d 1 because I seem can't find it in market here
Sent from my X10i using XDA App

maxpower1985 said:
The installation is Ok, the problem comes after..
Sent from my [email protected]
Click to expand...
Click to collapse
Yeah... after the installation is complete, and you press the home button and select SPB Shell 3D, you get a blank black screen. After a few seconds, it returns to the default home launcher

I use WB latest rom and spb v5.
A couple of notes.
1)Install apk to phone memory.
2)Goto plane mode (No data/radio)
3)Click on home and choose spb, tick use this as default.
4)It will say "not a compatable device" wait for 5-10 sec then click ok.
A couple of bugs...
You have to go through steps 3 and 4 each time you reboot.
Each time you reboot you lose custom widgets.
There is no easy way to organise the apps (i.e by alphabetical order or most used...you have to manually drag them about)
However, this is the best looking launcher EVER, and i have no screen lag at all.
Check this...
http://www.youtube.com/watch?v=0PjqdRLgX_g&feature=related
The lag you see in this video is only from the recording process....I can gurentee no screen lag on my phone at all!!!

K
gregbradley said:
I use WB latest rom and spb v5.
A couple of notes.
1)Install apk to phone memory.
2)Goto plane mode (No data/radio)
3)Click on home and choose spb, tick use this as default.
4)It will say "not a compatable device" wait for 5-10 sec then click ok.
A couple of bugs...
You have to go through steps 3 and 4 each time you reboot.
Each time you reboot you lose custom widgets.
There is no easy way to organise the apps (i.e by alphabetical order or most used...you have to manually drag them about)
However, this is the best looking launcher EVER, and i have no screen lag at all.
Check this...
http://www.youtube.com/watch?v=0PjqdRLgX_g&feature=related
The lag you see in this video is only from the recording process....I can gurentee no screen lag on my phone at all!!!
Click to expand...
Click to collapse
I think he means the new spb 3d bought off the market that just got released
Sent from my X10i using XDA App

Related

[APP] [MOD] [22.06.2010] Rollemod v0.1 for Youtube v1.5.20 (Froyo fix)

Features:
Force HQ Videos
Download Videos
Active downloads can be viewed by pressing Menu at the main youtube screen, then click on Misc and select Downloads. Save folder can be edited in the Rollemod Settings (also select Misc in Menu).
To download videos, simply press menu while you're in the player - select misc and press "Download Video". A dialog will pop up allowing you to chose the quality of the video of your desire.
I am planning on adding more features. But this should do it for now.
Credits:
Brut.all - for creating apktool and helping me getting started
Google - for creating the Youtube app
Download:
Eclair: http://ul.to/bmlept
Experimental Froyo Version: http://ul.to/zp90cg
Installation:
Either install the modification by using ADB by entering the following:
adb install youtube-21rolle.apk
Click to expand...
Click to collapse
Or put it on your SDCard and install it with the package installer by opening it with a file manager.
Known issues:
- Restarting a download doesn't work proper.
Planned features:
Zephyron said:
would it be possible for you to mod it so that it continues to stream and play the video in the background even when u press the home screen or back button?
Click to expand...
Click to collapse
Zephyron said:
make it some how "more" like the web youtube where u can press play and press pause and allow it to download while you do something else
Click to expand...
Click to collapse
what!?! No Froyo! Blasphemy!!
Aw it sounded so awesome.. But then I read no Froyo support..
Re: [APPMOD][22.06.2010] Rollemod v0.1 for Youtube v.1.5.20
Froyo will be supported once its released because i will have to modify its youtube app.
Sent from my Nexus One using Tapatalk
rolle3k said:
Froyo will be supported once its released because i will have to modify its youtube app.
Click to expand...
Click to collapse
But we have YouTube app from Froyo. Or not?
Brut.all said:
But we have YouTube app from Froyo. Or not?
Click to expand...
Click to collapse
Can we be sure it's the final one..?
rolle3k said:
Can we be sure it's the final one..?
Click to expand...
Click to collapse
No, but it works on current Froyos, so there shouldn't be a problem to create your mod for people using Froyo already.
EDIT:
But I understand that modding of YouTube may be hard cause of obfuscation, so you just don't wanna work with too many versions of it.
Google does not update the Youtube.apk that often, I'm pretty sure it's final, or at least close to final. We onlt had 2 Youtube.apks during éclair's lifecycle... we have Froyo's Youtubr.apk... unodexed by default.
I think it's doable, and it is why wait? Thanks for your work, though!
just my 2c
Sent from my Acer Liquid running Froyo (FRF72 port by me ).
Aight, I fixed the 2.1 App to work with Froyo, I am still testing it. Going to release it in a few, if everything works flawlessly..
Froyo fix posted.
First of all, i love your app and it works great so far on froyo on my nexus one
I just have one question though...
After installing this app, can i delete the other (the official) youtube app from my phone?? or does this app/mod relies on the official youtube app to function correctly?
Nice work, works well on Froyo
PeRRiiN said:
First of all, i love your app and it works great so far on froyo on my nexus one
I just have one question though...
After installing this app, can i delete the other (the official) youtube app from my phone?? or does this app/mod relies on the official youtube app to function correctly?
Click to expand...
Click to collapse
You can uninstall it, however you need root to do this.
rolle3k said:
You can uninstall it, however you need root to do this.
Click to expand...
Click to collapse
Alright cool.
Yup, I am rooted.
Going to remove it using ADB now.
Thanks
you should post a changelog so we know whats new =) Great job!
Sweet!
Is it possible to make it so that it keeps what you've streamed/buffered in memory while still watching the video?
Like, sometimes i cant hear something clearly or missed something in the video so i drag the bar back but it has to re-buffer when i do that -__- it would be nice if it kept it in memory temporarily so it would just play smooth instead of having to start downloading all over again when i rewind
???
Can i know where the downloaded videos are geting saving
is there still support for this mod?
what he said ^
Can someone repost on a different site; I'm having trouble getting either of the versions... plzNthx

Best Homescreen replacement?

I loved to use adw in the past but recently the updates made it unusable for me... so i am looking for a replacement...
Maybe i should just stick to an old version of adw (i unfortunatly didnt backup mine before updating)
So what are you guys using?
Ps: and please dont tell me to google or "this thread already exists" coz i want new information
Yea, ADW has started crashing on ocassions, its really annoying. Dont know what alternative is good like this.
ADW ftw! Never had an issue with it.
I for one am interested in trying the LG Optimus launcher once we get Eclair. Im an organization freak so the customizable app drawer appeals to me. Also looking forward to trying Launcher Pro Plus with Eclair. Currently using ADW and have no problems.
Sent from my X10i using XDA App
brunswick000 said:
I for one am interested in trying the LG Optimus launcher once we get Eclair. Im an organization freak so the customizable app drawer appeals to me.
Click to expand...
Click to collapse
Have you not tried the "group" feature in ADW? Open the app drawer and press the menu button - choose group - New catalog, name it, choose apps to be in it, then when you go into the app drawer you just press the menu button and choose your new group.
I had been using Slidescreen pro since last 3 weeks and with facebook and Google reader integration working with it,i have laid Timescape and the old ADW launcher to rest in peace.
I can assure you would get a different experience once you start using it........
XperiaX10iUser said:
Have you not tried the "group" feature in ADW? Open the app drawer and press the menu button - choose group - New catalog, name it, choose apps to be in it, then when you go into the app drawer you just press the menu button and choose your new group.
Click to expand...
Click to collapse
Yeah i use the group feature. I like it but the LG has all apps on one screen with groups seperated by heavy lines with titles. Im being fussy here is all ADW is by far my fav to date. Just looking to try something new.
Sent from my X10i using XDA App
XperiaX10iUser said:
ADW ftw! Never had an issue with it.
Click to expand...
Click to collapse
what version do use use? - even in the market adw is getting a lot of 1 - star ratings recently because its damn bugged ...
ps: if any1 got an old version feel free to upload it ... i really loved it
Thank you got asking this question so I didn't have to. ADW has been going crazy for me since I updated.
Sent from my X10a using Tapatalk
KingCifer said:
I loved to use adw in the past but recently the updates made it unusable for me... so i am looking for a replacement...
Maybe i should just stick to an old version of adw (i unfortunatly didnt backup mine before updating)
So what are you guys using?
Ps: and please dont tell me to google or "this thread already exists" coz i want new information
Click to expand...
Click to collapse
After reinstalling adw today i havent any problems.
But before that reinstalling it was crap like you said.
Sent from my X10i using Tapatalk
KingCifer said:
what version do use use?
Click to expand...
Click to collapse
1.1.4. Have you tried resetting the settings to see if that clears a few things up?
XperiaX10iUser said:
1.1.4. Have you tried resetting the settings to see if that clears a few things up?
Click to expand...
Click to collapse
damn i have to write somewhere in my profile that i started to code my own stuff when i was 15 years old ...
sure i tried to reinstall, delete settings, reset, just restart, play with different settings and i even tried to talk to it (j/k)... none of the things worked ...
can you do me a favor and try to press and hold the home key to switch between recent apps and then press the home key again?
everytime i do this i have to set it as default home again - this is way more annoying then the little crashes i experience all the time and for me it makes adw totally useless now ...
KingCifer said:
can you do me a favor and try to press and hold the home key to switch between recent apps and then press the home key again?
.
Click to expand...
Click to collapse
Hi - I just tried that on mine and it worked fine.. nice and quick too!!!
im_iceman said:
Hi - I just tried that on mine and it worked fine.. nice and quick too!!!
Click to expand...
Click to collapse
Same here too.
thx guys ... and wtf i cant get it to work
try LIVEHOME which is also a home screen replacement, nearly the same as adw but has a few more features, one of them is transitions, you can flick through you home screens like pages in a book (love it). Try it out.
KingCifer said:
thx guys ... and wtf i cant get it to work
Click to expand...
Click to collapse
ok after playing around a lot with settings i have to apologize to my beloved adw launcher
ok it still crashes a lot in the newer version but my main problem - that it cant remember the default home - is on the stock android homescreen too so i guess somehow my software is ****ed up *cry* ...
guess i have to reflash (god damnit this **** is more buggy then windows 95)
edit: btw livehome looks really nice ... i like that you can change the icons in the drawer
Update: after reinstall and some hours later i got crashes again and that home-button problem too.
Now i set only the adw-homescreen to "dont auto-rotate" and i have no problems now.
Sent from my X10i using Tapatalk
Running ADW. but slidescreen pro is pretty cool too.
Sent from my X10a using XDA App
I use zeam launcher. It's stable fast and not bloated with features
Sent from my X10a using XDA App

[APP]Update1:5 Colors added:Nano Wrist WatchFree for limited time![Mar/3/11]

Missed your Wrist Watch? Now you have a new clock design and fancy buttons and new Font!
As my gift to XDA members, this app is free for limited time. If you want to support me buy it on market -->
***Icons in "add alarm" have same color as the watch, i just didnt uploaded pics for those
Link
It only takes 1 sec to click on "Thanks button".
Dear devs, plz do not add the clock to your roms. Thank you.
Credit: 4 Menu buttons are from Miuitheme/Glowbuster theme.
Thanks for you great efforts.
NOTES: App should work for most roms, some devices running gingerbread might have issues. If app finds enough fans, gingerbread version will also be added.
Instructions:
1) Clean cache in your stock Clock app and remove the old widget.
2)rebooting not necessary but recommended.
3)Copy it to your sdcard and install it with your favorite installer
4) Enjoy!
Downloads
Blue-->Link
Green-->Link
Cyan-->Link
Red-->Link
Yellow-->Link
Purple-->Link
This is great!
thank u so much
pretty great, thanks man!
Hey,
Great looking app, can't wait to try it out.
Just installed it to my Desire HD (stock rom, 1.72 firmware) via adb and whenever I try to add the widget to my home screen, it tells me "no more room on this homescreen". This is with LauncherPRO.
On restart of my phone I also got a message saying that the process had crashed and had to force close. (app loads fine however, just not able to put the widget on)
Any suggestions?
I just tried it on my galaxy s it says no enough romm in this page in both launcher pro and touchwiz.
When i open the app it force close and keep doing the same.
I really want this watch but no luck.
Sent from my GT-I9000 using XDA App
Thanks,
Lovin the green.
Skull Drome said:
Hey,
Great looking app, can't wait to try it out.
Just installed it to my Desire HD (stock rom, 1.72 firmware) via adb and whenever I try to add the widget to my home screen, it tells me "no more room on this homescreen". This is with LauncherPRO.
On restart of my phone I also got a message saying that the process had crashed and had to force close. (app loads fine however, just not able to put the widget on)
Any suggestions?
Click to expand...
Click to collapse
There was no need to use adb! It's similar to stock but not same app. The widget will occupy the whole screen. Did you have another shortcuts on the screen when u tried?
iyas94 said:
I just tried it on my galaxy s it says no enough romm in this page in both launcher pro and touchwiz.
When i open the app it force close and keep doing the same.
I really want this watch but no luck.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Make sure there is no other shortcuts on the screen. Let me know if this helps.
Dan9I said:
This is great!
Click to expand...
Click to collapse
Thanks for feedback
Thanks man , looks great and attractive to me . Will give it a try now.
Btw can this directly be installed from the market? Unlike other apps which require root access plus fiddling with the adb process and commands?
virus_spreade121 said:
Thanks man , looks great and attractive to me . Will give it a try now.
Btw can this directly be installed from the market? Unlike other apps which require root access plus fiddling with the adb process and commands?
Click to expand...
Click to collapse
You are welcome Yes it can (root & non-root), no need for adb.
but it's a paid version on market and free here for limited time.
adam2010 said:
There was no need to use adb! It's similar to stock but not same app. The widget will occupy the whole screen. Did you have another shortcuts on the screen when u tried?
Click to expand...
Click to collapse
Heh, only reason I used adb was because I downloaded the apk on my desktop, and my phone was plugged in but not mounted. I'm lazy like that XD
And yeah, I tried it on an empty home screen, so no other widgets on it.
Sent from my Desire HD using XDA App
Skull Drome said:
Heh, only reason I used adb was because I downloaded the apk on my desktop, and my phone was plugged in but not mounted. I'm lazy like that XD
And yeah, I tried it on an empty home screen, so no other widgets on it.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I will try to lower the resolution to see if it resolves the issue in next update , stay lazy my friend
same issues here I would love to see this work on my vibrant though.
jtj2318 said:
same issues here I would love to see this work on my vibrant though.
Click to expand...
Click to collapse
message received I will fix it when i find time. tnx 4 feedback
Great Work!!
It's me or there isn't a way to have it orange by now?
Thanks
Hey Adam, I've been toying around with the launcher pro settings, just found, your widget uses a 5x5 layout currently which may be why many people are having issues not being able to add this to a home screen since the default is 4x4.
Any chance of a 4x4 version?
Cheers
Harry
Sent from my Desire HD using XDA App
Would appreciate it if someone could upload the file to multiupload.com
Nice! You reminded me of how much I want one of these Nano Watches

[TOOL] SpareParts (Compcache and CPU settings working)

Hello All,
I am not de developer of this app, but I find it very usefull and wanted to share it. Its called SpareParts and people that have had previous android phones are probably familiar with it.
However, I never found it in any Xperia X10 rom, and everytime I tried to install one from the internet, it just wouldn't work, or didn't include some of the most interesting settings of this app.
Basically SpareParts is a system tweaker, and lets you change a variety of settings which makes it a very handy tool.
I recently found one which included Compcache and CPU settings that worked fine on my X10.
For those who don't know, enabling compcache allows android to compress RAM and results in overall better performance.
It also has working CPU settings (As you may know, most CPU control apps available are unreliable with the X10).
In my case, I used to have ramdom reboot problems , specially when I was heavy using the phone (ie, playing asphalt and streaming music at the same time) and after enabling compache with this app the issue went away.
Also, it allows you to lower the CPU speed without affecting the phone performance too much, so it definitively helps to save a lot of battery.
Anyone willing in to give it a try, here is the link, i suggest setting Swapines to 15 after enabling compache:
http://dl.dropbox.com/u/7864538/SpareParts-4.apk
The phone seems to be more smooth, but may be a placebo effect.
Please give it a try and share your results.
BTW I am using CM 6.1.1 ROM Tweaked and with extras with custom Sysctl settings posted in this thread:
http://forum.xda-developers.com/showthread.php?t=929448
PS.
You may also want to try changing the animation speed to fast (under original spareparts settings). The phone will feel a lot faster
(if you fin this post helpful please don't forget to click the thanks button)
Hmmm interesting, but I can't seem to use it to turn off some of the status bar stuff.
Running FreeX10 with .54 bb
cordam said:
Hmmm interesting, but I can't seem to use it to turn off some of the status bar stuff.
Running FreeX10 with .54 bb
Click to expand...
Click to collapse
Some of the settings will not work. Maybe a dev can mod the app and just leave the working settings. This version of the app was modded for another device.
I'm on wolfbreak's cm v 4.4 and this definitely made the phone.snappier...
I had to uninstall the original spare parts before installing this one or the compcache setting wouldn't stay after a reboot.
Thanks for this!
would not be fully functional since we are not allowed custom kernals
Sweet!
Thank you! This does have a lot more capabilities than the regular spare parts!!! Will tweek it and give feed back!!!
Best regards,
Chris
fiscidtox said:
I'm on wolfbreak's cm v 4.4 and this definitely made the phone.snappier...
I had to uninstall the original spare parts before installing this one or the compcache setting wouldn't stay after a reboot.
Thanks for this!
Click to expand...
Click to collapse
I'm happy that its working for you. don't forget to click the thanks button .
aR_ChRiS said:
would not be fully functional since we are not allowed custom kernals
Click to expand...
Click to collapse
I see you are using 2.1 ROM. I am not sure if it will work in 2.1. I only tested it in 2.2. However, some of the settings are specific for the device this app was originally made for so they won't work for us (ie the status bar tweaks).
cordam said:
Hmmm interesting, but I can't seem to use it to turn off some of the status bar stuff.
Running FreeX10 with .54 bb
Click to expand...
Click to collapse
If you want to change the status bar options you can use CM settings.
Hey, I just installed this version of spare parts and now my phone doesnt go to sleep when I press the power button. I have reverted back to original compache settings and default 60 swapines, rebooted and uninstalled. Please help
Aphex33 said:
Hey, I just installed this version of spare parts and now my phone doesnt go to sleep when I press the power button. I have reverted back to original compache settings and default 60 swapines, rebooted and uninstalled. Please help
Click to expand...
Click to collapse
Nevermind, issue resolved.
Defintion swapines please?
Aphex33 said:
Defintion swapines please?
Click to expand...
Click to collapse
You can find a good one in wikipedia.
Sent from my X10i using XDA App
Do i have to manually install this? Because it didnt work the regular way ;o
Sent from my X10i using XDA Premium App
Which ROM are you running?
shahkam said:
Do i have to manually install this? Because it didnt work the regular way ;o
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Portland ed from x10 brick

[MOD] Take photos with the R button - Now on the market!

After reading a thread on here before about this is (which i cannot find again) I decided to get to work to make this work, and after a little bit of poking about i managed to get it to work!
The app is now on the market! either search for "xperia play camera" or you use this link https://market.android.com/details?id=seb.camera.mod&feature=search_result.
The instructions are now obsolete but im keeping them there for completeness.
Installation Insturctions
1. Backup the original camera application with a root application manager e.g. titanium backup
2. Then delete the original camera app
3. Reboot your phone
4. Install the .apk from below
If you have a previous version installed you do not need to delete the old one or reboot just install as you would any other app
Version history
v5 - fixed remaining issues this is the final version as of time of writing please report any issues.
v4 - fixed video mode and added non root version
v3 - pictures now taken on release of R1 and menu position fixed
v2 - Decreased menu size by about 40% and fixed minor graphical glitches with menus
v1 - Original release, has VERY large menus
Hope you guys like it!
Removed my old camera app with titanium backup, tried to install this one, got a message saying 'application not installed'.
Clyzm said:
Removed my old camera app with titanium backup, tried to install this one, got a message saying 'application not installed'.
Click to expand...
Click to collapse
That's odd that's the issue i was getting before i removed the camera app fully, make sure you have unknown sources enabled and i used antek app manager to remove it so manbe give that a go. Ill look into it.
I will defo be trying this!!
Clyzm said:
Removed my old camera app with titanium backup, tried to install this one, got a message saying 'application not installed'.
Click to expand...
Click to collapse
Same thing happened to me. Just reboot your phone after you remove the app and the install should work, worked for me
Zoop57 said:
After reading a thread on here before about this is (which i cannot find again) I decided to get to work to make this work, and after a little bit of poking about i managed to get it to work!
Currently the shutter button on the screen remains highlighted until you tap the screen, not a big issue but its one I didn't have time to resolve, maybe later.
To install the app (.apk attached) you need to remove the one that came with the phone and then install this one, I would recommend backing up the original first too.
Hope you guys like it!
Click to expand...
Click to collapse
Did you update app without telling us? I dont get the highlighted shutter button after I take a pic. Also the menu options are huge! Anyway to fix that?
emann56 said:
Did you update app without telling us? I dont get the highlighted shutter button after I take a pic. Also the menu options are huge! Anyway to fix that?
Click to expand...
Click to collapse
Oh god yeah I didnt notice that I basicly downloaded the latest source code for the camera app from the android git and edited the code involving shutter buttons, when I get a chance ill have a look why the fonts so big. Xxx
Sent from my R800i using XDA App
emann56 said:
Same thing happened to me. Just reboot your phone after you remove the app and the install should work, worked for me
Click to expand...
Click to collapse
Yep, this worked perfectly. Thanks!
Sent from my R800a using XDA App
Thanks! Good job!!!
Cheers mate working fine. Backed up org. camera apk, then deleted it with titanium, rebooted and installed modded version without any issues
Regards Dousan...
Works like a charm ! thanks
Now going to update the original post with v2 that fixes the graphical glitches with the on screen hud. The pop-up menus have been decreased in size but still remain larger than the insanely small ones the original menu had. This version can be installed over the top of v1 like a normal app with no fuss.
good job !!
but how can i move libs to system files?
Great app! Works like a charm. Thanks for the great work.
My suggestion: I don't know what everyone thinks about this, but would it be possible to make it so that the app only focuses pressing down but doesn't take the actual photo until you release your finger (it would kind of mirror the shutter button on the screen).
Some advantages that would come from this would be being able to focus and then reframe, as well as timing shots better.
Thx bud works so much better now...I really disliked touching the screen to take pic.
liaoip said:
Would it be possible to make it so that the app only focuses pressing down but doesn't take the actual photo.
Click to expand...
Click to collapse
Agree with this.
Also, r trigger doesn't seem to work in video mode.
Excellent mod though, thumbs up.
I guess its time for v3 that shouldnt be hard to do and I shall try fix the video mode too.
Sent from my R800i using XDA App
Sounds good to me with R button pushed=focus and R button released=snap picture
Good work on the app mate, looking forward to a v3
Regards Dousan...
Good job but a few issues...
1. Is it me or so images taken this way seem to be blurrier than when taken with the stock camera app?
2. Why is there a gap between the menu bar, and the portion with the shutter button and the camera mode selector?
3. It seems to me that the menu, when clicked on it, seems as if the options are very blurry?
Nhialor
Also, remove the on screen shutter button.
You see, you help people, do a good job & they expect you to perform miracles!

Categories

Resources