Database Info

[Q] Update not loading

Guys,
I just became the, now rather dubious, owner of a gTablet that a colleague brought for me from the States. So far I am not that impressed. Several apps that supposed to be on there, aren't (no Kindle app out of the box, and no gMarket, despite what the manual says).
SO, I try the announced update procedure: fails.
First time fails at 8%. Second time fails at 13%, third time fails at 28%, fourth time fails at 4%. Is this a joke of some sort? Also the download is rather slow, as in, they use smoke signals to get the message across!
Does anyone have the update as a file that I can run as an apk perhaps?
I also have to point out that the GUI rather sucks. The settings menu misses about 50% of the Android 2.2 options (I have a HTC desire. Waaaay more settings options...)
After my complaints,lets get to figuring this out.
1) Can someone point me to the update pack if it is available for download via my Mac and can be installed using that ES explorer program it has installed?
2) Does the update provide Google Market or the original weblink? Does it use a different gui or still the same simpleton gui?
3) if not, is there a simple ROM flash I can do that gives me a different GUI and google Market?
I have flashed my HTC Hero before, which was not a big deal. However, I want things done simple, so if there is a good ROM with a nice GUI and simple instructions for a noob (I got two left hands when it comes to this sort of stuff), and Google Market, I would gladly see a link.
Any support will be very welcome!

you found the right place
ksporry said:
Guys,
I just became the, now rather dubious, owner of a gTablet that a colleague brought for me from the States. So far I am not that impressed. Several apps that supposed to be on there, aren't (no Kindle app out of the box, and no gMarket, despite what the manual says).
SO, I try the announced update procedure: fails.
First time fails at 8%. Second time fails at 13%, third time fails at 28%, fourth time fails at 4%. Is this a joke of some sort? Also the download is rather slow, as in, they use smoke signals to get the message across!
Does anyone have the update as a file that I can run as an apk perhaps?
I also have to point out that the GUI rather sucks. The settings menu misses about 50% of the Android 2.2 options (I have a HTC desire. Waaaay more settings options...)
After my complaints,lets get to figuring this out.
1) Can someone point me to the update pack if it is available for download via my Mac and can be installed using that ES explorer program it has installed?
2) Does the update provide Google Market or the original weblink? Does it use a different gui or still the same simpleton gui?
3) if not, is there a simple ROM flash I can do that gives me a different GUI and google Market?
I have flashed my HTC Hero before, which was not a big deal. However, I want things done simple, so if there is a good ROM with a nice GUI and simple instructions for a noob (I got two left hands when it comes to this sort of stuff), and Google Market, I would gladly see a link.
Any support will be very welcome!
Click to expand...
Click to collapse
Forget about the stock update and read about TNT lite or the vegan beta Rom if you feel experimental. You can get market flash and pretty much all the Google goodies.

ksporry said:
Guys,
I just became the, now rather dubious, owner of a gTablet that a colleague brought for me from the States. So far I am not that impressed. Several apps that supposed to be on there, aren't (no Kindle app out of the box, and no gMarket, despite what the manual says).
SO, I try the announced update procedure: fails.
First time fails at 8%. Second time fails at 13%, third time fails at 28%, fourth time fails at 4%. Is this a joke of some sort? Also the download is rather slow, as in, they use smoke signals to get the message across!
Does anyone have the update as a file that I can run as an apk perhaps?
I also have to point out that the GUI rather sucks. The settings menu misses about 50% of the Android 2.2 options (I have a HTC desire. Waaaay more settings options...)
After my complaints,lets get to figuring this out.
1) Can someone point me to the update pack if it is available for download via my Mac and can be installed using that ES explorer program it has installed?
2) Does the update provide Google Market or the original weblink? Does it use a different gui or still the same simpleton gui?
3) if not, is there a simple ROM flash I can do that gives me a different GUI and google Market?
I have flashed my HTC Hero before, which was not a big deal. However, I want things done simple, so if there is a good ROM with a nice GUI and simple instructions for a noob (I got two left hands when it comes to this sort of stuff), and Google Market, I would gladly see a link.
Any support will be very welcome!
Click to expand...
Click to collapse
A good start would be the following guide.
http://forum.xda-developers.com/showthread.php?t=865245
Understand that there are newer versions of the rom referenced, also there's VEGAn, a rom based on the Vega.

The Gtab stock needs a lot of help but it is a very good product with a little TLC and some grunt work:
Different devices/users different opinions. I am more than satisfied with the performance and feel of my Gtab without flashing a different ROM and what I did was follow these instructions:
http://forum.xda-developers.com/showthread.php?t=827209
I used root explorer instead of AndRootFile
Then I changed my launcher to ADW.Launcher
Side load flash (Instructions/.apk on XDA-developers)
Do the market fix to get all market (Instructions/.apk on XDA-developers)
add titanium backup
add ROMManager
Note: When I applied the latest update from Viewsonic (fixed the video driver, now AngryBirds, etc working) I had to re-root the device but everything else works fine.
Even fixed the issue with Gtab not seeing Ad-hoc network from phone (Instructions can be found on internet). Now my Gtab rocks, connects to my home Wifi or if not available connects to my Phone Wifi.
I can still launch the default tapNtap if I want to and Viewsonic upgrades apply fine. I had an issue with update also....Support had me set the sleep to "off" and then it worked fine, however the update image was posted on XDA-developer:

Bobtran,
Interesting perspective. Could you run Quadrant and show us what that score is?
I have had TnT up to 2.2 then swithed to VEGAn beta3 now. Q =2411
Most everything runs very very fast...

All, Thanks for the suggestions and the useful links . I might be flashing mine this weekend.
As for which ROM to use, what are the pros and cons for one over another? E.g. if I were to take the TnT ROM (I think it's at 2.4.1 now?), how does that fare against, say, the Vegan Beta4 (I think the latest is beta4 from what I read on some posts)
Bobtran, did you have a link for the update image? seemed like you were going to post it, but got cut short...

Guys,
I am trying to install Clockwork Mod v08 as per one of the links. First issue is that the tablet won't mount the SDcard to my desktop. SHouldn't be a big issue as I can coy/paste the required files from the internal storage to the SDcard via ESexplorer (standard installed on the gTablet).
However, how do I know it installed correctly? I don't see a new app and the boot install goes very fast. There is an opened box with an arrow pointing down and a load bar that seems to have green hashed filling, as if it's preparing to install. Then suddenly the splash screen pops up. The box with arrow and progress bar are there for a second or so, maybe 2. Seems rather quick. Is this correct?
EDIT: I wanted to say the boot screen didn't come up when starting up with vol+ and pwr, but just noticed, it does... so should be ok

well, seems I have been successful in flashing the new ROM (TnT 2.4.0) using CWM-v08.
Question though, the instructions in the TnT installation guide (http://forum.xda-developers.com/showthread.php?t=865245) seem to say that the market fix only is a partial fix (note that the comment applies to TnT2.2).
Now that I installed the TnT2.4.0 ROM, I was wondering if the market fix is also only partial for TnT2.4. If yes, can I run the patch at
http://forum.xda-developers.com/showthread.php?t=827209
and if yes, would that give me full Market access? If not, what's involved in getting full Market access?
As a side question that may not belong here but wouldn't be answered in the appropriate forum section: I have an XT701 phone that needs a Market Fix. Would the fix at
http://forum.xda-developers.com/showthread.php?t=827209
also provide my phone with the Market? Just a side question, if no answer, that's fine...

n2thecloud said:
Bobtran,
Interesting perspective. Could you run Quadrant and show us what that score is?
I have had TnT up to 2.2 then swithed to VEGAn beta3 now. Q =2411
Most everything runs very very fast...
Click to expand...
Click to collapse
Unfortunately I flashed to TnT lite yesterday so can't do that anymore without starting from scratch. Just testing the waters so to speak.

ksporry said:
All, Thanks for the suggestions and the useful links . I might be flashing mine this weekend.
As for which ROM to use, what are the pros and cons for one over another? E.g. if I were to take the TnT ROM (I think it's at 2.4.1 now?), how does that fare against, say, the Vegan Beta4 (I think the latest is beta4 from what I read on some posts)
Bobtran, did you have a link for the update image? seemed like you were going to post it, but got cut short...
Click to expand...
Click to collapse
Yes I was but I couldn't find it. Did some more research and here it is:
http://forum.xda-developers.com/showthread.php?t=847653&page=4
see post #35

ksporry said:
well, seems I have been successful in flashing the new ROM (TnT 2.4.0) using CWM-v08.
Question though, the instructions in the TnT installation guide (http://forum.xda-developers.com/showthread.php?t=865245) seem to say that the market fix only is a partial fix (note that the comment applies to TnT2.2).
Now that I installed the TnT2.4.0 ROM, I was wondering if the market fix is also only partial for TnT2.4. If yes, can I run the patch at
http://forum.xda-developers.com/showthread.php?t=827209
and if yes, would that give me full Market access? If not, what's involved in getting full Market access?
As a side question that may not belong here but wouldn't be answered in the appropriate forum section: I have an XT701 phone that needs a Market Fix. Would the fix at
http://forum.xda-developers.com/showthread.php?t=827209
also provide my phone with the Market? Just a side question, if no answer, that's fine...
Click to expand...
Click to collapse
For the market fix, just see the link that I have in my first post, in the TnT Lite thread. That fix could also work on other devices. It's the same fix in the link you just posted.

[Q] CynogenMod 7 issues on the GTablet

I apologize if this is the wrong area for these questions. I'm having a few issues with my installation of CM7. I've tried looking in several places, but nothing seems to address my problems.
First thing I noticed upon installation was that I was never asked to set up my touchscreen or input my google information. I tried doing this manually by adding an exchange account, but that would not work. I next tried looking for my apps to see if they installed automatically this time around or not and none of my previous apps show, nor does market exist anywhere. Without any instance of market to be found I can't use any of the market fixes. However, without an inputted google id I don't think that would have mattered.
Can anyone guide me to where I can find help for these issues or post any possible solutions?

http://goo-inside.me/gapps/gapps-gb-tegra-20110118-signed.zip
Google apps - Flash right after you flash CM7. You might have to bypass the setup, but should be able to open the market and input google login. It won't auto download, but you'll have some market access.
http://forum.xda-developers.com/showthread.php?t=919958
Read the dev thread for other issue and such, don't have the time to dig through and help further.

chaelamity said:
I apologize if this is the wrong area for these questions. I'm having a few issues with my installation of CM7. I've tried looking in several places, but nothing seems to address my problems.
First thing I noticed upon installation was that I was never asked to set up my touchscreen or input my google information. I tried doing this manually by adding an exchange account, but that would not work. I next tried looking for my apps to see if they installed automatically this time around or not and none of my previous apps show, nor does market exist anywhere. Without any instance of market to be found I can't use any of the market fixes. However, without an inputted google id I don't think that would have mattered.
Can anyone guide me to where I can find help for these issues or post any possible solutions?
Click to expand...
Click to collapse
As the previous poster said, install Gapps. That will give you the setup screen the first time you reboot the GTab. As a word of warning, I wasn't able to bypass the first screen (touch the droid) on the main version posted in the development thread (the Beta05), even with the click around the screen. I was able to get past it right away on the "offical" build in post 18 of that thread, however (Beta01).
Let us know if that doesn't fix your problem.

Thanx alot guys. I was finally able to get market going by installing gaps and using the CyanogenMod 7 bet01. I ran into the seup screen issue with the Beta05 just like you warned. I didn't do the full market fix as everything I wanted was readily available. I'm not even sure if the full market is absent or not.
I am noticing that after you mount the USB connection you can't unmount. Also, my internal storage isn't recognized. I think there were fixes for some of this in Beta5. Is there a way to update to Beta 5 without having my previous problems or some other fix for the USB and storeage issues to anyone's knowledge?

flash to vegan5 and you will be way happier.
I tried CM7 and it had so many issues.
Once you flash vegan5 you will actually enjoy your tab

You can try flashing beta5 over beta1 and clear cache/dalvik. I'm not sure if that will work, but would be my best suggestion.
On the other hand, I actually agree with the previous poster saying that vegan is probably the better option at the moment. It seems much more stable and feature complete, even if it is froyo instead of gingerbread.
Either way, make a nandroid backup so you can go back if things go sideways.

I didn't get to post this before the responses. I did actually go ahead and flash over Beta01 with Beta05. I just didn't wipe the data or cache. Everything came back just fine. This fixed the storage and usb issues in Beta01. However, you have the previous audio issue from older builds where you have to plug in headphones and unplug them to get the audio back. I've tried VEGAn 5.1 and it works awesomely. I'm merely choosing aesthetics above overall functionality.
My tab has been delegated to fancy entertainment device (comics, casual browsing, games and video). It does all I need for now. I figure since VEGAn and CM7 are joining forces, why not do the switch early and test it out. I love where they're going with this ROM. I can't wait to get my grubby paws on a finished product.
Again, thanks big time for all the assistance. I generally skulk and read through the threads, but I love this place and all that everyone provides for the lesser technophiles like myself.

I thought maybe I could post my own problems to this thread?
So I'm on cynogen 6.1.1 on htc evo 2.2.1 kernal [email protected] #1
Anyway... I've tried 3 times to install the update to 6.1.2 today and each time it's gotten stuck around 58%. Any links to places I'm sure are there and I just couldn't find?
Also, for some reason, for the first time since I got my evo, I'm getting TONS of errors when attempting to send sms. theres a pink like traingle with a ! in the middle. Any suggestions?
How do I fix the bug with the camera?
You can email me if you like, at [email protected].
I am sort of inbetween a newb and whatever the next level would be, lol. This past week I was able to root, and install a custom mod, AND install an update to that customed mod (which is the one i'm on now) all w/o ever posting any questions to any forums. Hopefully that'll get me some brownie points?
Please PLEASE please!! I will even paypal $10 once I get this resolved.
On bended knee I beg (im not really this dramatic in real life )
Strlite85

strlite85 said:
I thought maybe I could post my own problems to this thread?
So I'm on cynogen 6.1.1 on htc evo 2.2.1 kernal [email protected] #1
Anyway... I've tried 3 times to install the update to 6.1.2 today and each time it's gotten stuck around 58%. Any links to places I'm sure are there and I just couldn't find?
Also, for some reason, for the first time since I got my evo, I'm getting TONS of errors when attempting to send sms. theres a pink like traingle with a ! in the middle. Any suggestions?
How do I fix the bug with the camera?
You can email me if you like, at [email protected].
I am sort of inbetween a newb and whatever the next level would be, lol. This past week I was able to root, and install a custom mod, AND install an update to that customed mod (which is the one i'm on now) all w/o ever posting any questions to any forums. Hopefully that'll get me some brownie points?
Please PLEASE please!! I will even paypal $10 once I get this resolved.
On bended knee I beg (im not really this dramatic in real life )
Strlite85
Click to expand...
Click to collapse
My suggestion would be to ask somewhere more appropriate. This thread is for a different version of CM, on a different device all together.
Try checking out
Evo dev
http://forum.xda-developers.com/forumdisplay.php?f=653
Evo general
http://forum.xda-developers.com/forumdisplay.php?f=620
CM
http://forum.cyanogenmod.com/forum/47-htc-evo-stable-mod/

lockedup
after I flashed Cm7 I get stuck on boot screen with the word android on the screen any body have a fix?

dexter230 said:
after I flashed Cm7 I get stuck on boot screen with the word android on the screen any body have a fix?
Click to expand...
Click to collapse
This usually means the installation was corrupted in some manner.
And it's usually because of a corrupt zip one would flash with.
You can reflash cm7 with another fresh downloaded file if you still have access to recovery mode.
Which I think you should be able becase the boot up process makes it up to the "Android" Bootscreen before it starts bootlooping.
From Advanced Recovery mode you can mount the USB option for the SDCard then transfer the fresh DL to your SCDard that way.
Also make sure you are using bekit's version .8 of CWM while in recovery mode.
Grab CWM v.8 from here
Other versions of CWM don't work well with the GTAB.

gtab for dummies

I just created a website called Viewsonic GTablet For Dummies. I'm slowly adding step by step instructions on how to do things for dummies.

Well done! This is another great asset for new modders. Love that the first thing you did was nvflash for dummies. Its a handy tool and invaluable skill to have.

Great Job and this should be a 'sticky'.
Suggested to add a section for adb.
Thanks

Thanks!
Very simple instructions. My Tiger Direct GTab arrives tomorrow and I want to be prepared to bring it to 1.1 so I can install CM7.
I think I could do this a couple different ways:
1. Standard recovery
2. CWM update
3. NVFlash
I have read tons of posts/articles and being a sw engineer myself I can appreciate hoe difficult the documentation task is.

I haven't scanned the whole thing, but it looks nice - well laid out for new users, or even old users for that matter!
VTDivot said:
Very simple instructions. My Tiger Direct GTab arrives tomorrow and I want to be prepared to bring it to 1.1 so I can install CM7.
I think I could do this a couple different ways:
1. Standard recovery
2. CWM update
3. NVFlash
I have read tons of posts/articles and being a sw engineer myself I can appreciate hoe difficult the documentation task is.
Click to expand...
Click to collapse
There are a few ways to do it, that's correct. I personally recommend flashing to stock 3588, using stock recovery. The reason why is because I feel it's the safest way to get back to 3588. nvflash is also a good way (and it's what I use) but some people feel indimidated by nvflash so I usually don't recommend it unless there's no other choice.
Btw, I already requested that the CM folks consider making a 1.2 version of CM7. My reasons:
1- It would avoid having new stock users doing a branch jump. Evidence seems to indicate that most new devices are being sold with 4349 (1.2 branch)
2- Minimizes soft-bricks
3- Allows them to also support other harmony devices such as the Adam, the Olipad and the Hannspad. These devices are also on this same 1.2 branch, with minor differences in their kernels because of the hardware.
Hopefully they will consider it and thus make this a non-issue for new users.

goodintentions said:
I just created a website called Viewsonic GTablet For Dummies. I'm slowly adding step by step instructions on how to do things for dummies.
Click to expand...
Click to collapse
Great idea for a website! This clean, de-cluttered info is badly needed by all the newbies coming to the dev forums.
I do have one editorial suggestion for you (based on 30 years of IT customer service experience):
If there is anyway possible for a user to misunderstand simple instructions, some of them will do so. Many of these folks don't know anything at all about computers, desktop or tablets, other than how to read e-mail and web-surf. They just want to get their hot new G-tab to work like an I-pad.
Whenever your instructions refer to doing things on the PC (rather than on the G-tab) say so explicitly:
Part A - Connect to Computer Via USB in APX Mode
1. Using your PC, download the driver for USB connector here (clicky).
2. Unzip the USB zip file and place the folder somewhere easy for you to find. I suggest your PC's desktop.
Otherwise, half of them will download it to the G-tab, and then get all wrapped around the axle trying to figure out why it doesn't work, even though they are following your instructions exactly. After all, the name of the site is "...for Dummies," right? []
Again, great site!
Keep those "...for Dummies" instructions coming.

roebeet said:
1- It would avoid having new stock users doing a branch jump. Evidence seems to indicate that most new devices are being sold with 4349 (1.2 branch)
Hopefully they will consider it and thus make this a non-issue for new users.
Click to expand...
Click to collapse
Hey thnx for taking the time to respond to my first post.
I'm not 100% set on CM7, it just appeared that would best suit my needs for a multimedia tablet.
As long as I can play embedded youtube and flash content, still play DVDs for the kiddies and have netflix working I'll try a 1.2 boot ROM. Does BC handle all of this? I am fine with one off hacks if required after the ROM is flashed. I also like the idea of HW acceleration, but that is not a top priority
*EDIT*
It appears there might be a CM7 option for a 1.2 bootloader that I didn't see.

The website is a great idea, goodintentions.
Suggestion:
Under the NVFlash tab, for people who are not complete dummies, you might consider adding the information that gTablets come with (at least) 2 different NAND-flash partitioning schemes (and it also looks like there are minor differences in the underlying hardware). This, of course, means links to the other nvflash zip file (*_46_*) that is supposed to be used for the newer gTablets.
Also, some of the latest gTablets--the ones that come with the 1.2 bootloader and the non-standard (new?) flash partitioning scheme--only work with the updated nvflash zip file that Roebeet created after he got the TnT update with the 1.2 bootloader.
I'm not a nvflash expert, and maybe you could get away with nvflashing bekit's original nvflash files onto every gTablet--thus restoring all of them to a "canonical" state--but, I'd like to know if this, in fact, is possible, and also correct.

ToadVine - thank you for the suggestion. I went back through and added in "using your pc" LOL.
Roebeet - I was actually thinking of telling them to do the stock recovery but then I thought it's best to get them to learn nvflash. Might as well kill 2 birds with 1 stone.
Mydave1 - I don't think it's gonna happen, since it's a separate site from xda.
Rajeevvp - I've been wondering about that version of nvflash. Is it really necessary? Why does the folder say "deprecated"?

goodintentions said:
I just created a website called Viewsonic GTablet For Dummies. I'm slowly adding step by step instructions on how to do things for dummies.
Click to expand...
Click to collapse
lol, I thought it would have been a single page with a flashing "go get an iPad" all over it
Nicely done goodintentions, thank you for putting the hours in this.
If I can suggest, I would say a BL1.1<->BL1.2 for dummies would certainly be beneficial.

goodintentions said:
I just created a website called Viewsonic GTablet For Dummies. I'm slowly adding step by step instructions on how to do things for dummies.
Click to expand...
Click to collapse
Great idea GI...
I'm surprised you didn't start with a disclaimer:
"This site is designed for those that bought a G-Tablet, knowing it's limitations and abilities. If you bought a G-Tablet becuase you wanted an iPad that would work right out of the box, and requires no thinking on your part to use , please do the rest of the G-Tablet community a favor and return it, save up, and buy an iPad, like you wanted to do initially. THIS IS NOT AN IPAD, AND NEVER WILL BE, ACCEPT THAT FACT BEFORE PROCEEDING."

I'm plagonna plagiarize ideas from you 2. Check my website in 10 minutes.

now that's what I expected...it's complete, now
makes me start thinking of a trouble shooting page...
For Flashing a Rom:
Part D (flashing a 1.2 ROM)
After backup is done, go back out and select "install zip from sdcard".
Choose "wipe data/factory reset".
Choose "wipe cache partition".
Once it's done, go back out to root menu and choose "advanced".
Choose "Wipe Dalvik Cache".
Go back out and choose "install zip from sdcard".
Go into folder "Rom" and choose the Rom that you picked from the list. Watch it install.
After ROM installation is complete, repeat steps 6 and 7 for the GAPPS file IF YOU NEED TO.
Once everything is done, go back out to root menu and choose "reboot system now".
Click to expand...
Click to collapse
Troubleshooting:
If your system does not boot into the new Rom, but you swear you followed all of the instructions above, please see the disclaimer page, as you are probably lying to yourself, and didn't actually follow ALL of the instructions.
If your system doesn't boot into the new rom, and you admit that you didn't follow the instructions completely, because you think that you are smarter than everyone else and can "skip a few unneeded steps," please see the disclaimer page
If the new rom is not doing everything you expect it to do, please refer to the specific rom's information page to see if what you expect is within it's abilities. If it's not, please refer to the disclaimer page
If you are having trouble finding the iTunes icon on your device, please see the disclaimer page

the worst part about this is that your website is designed specifically for people like me. I'm a dummy and damn proud of it. Prior to buying my G-Tablet, I had never heard of NVFlash, ADB, APX, CWM. I had no idea that Android 2.2 was designed specifically for phones. Hell, I almost bought a cheapo Chinese 7" tablet with Android 1.6 on it...what IS 1.6? "Popcorn, Pocket Lint" or something else retardedly cryptic?
All I knew, when buying it used on Ebay was that the screen was horrible, the stock Rom was a joke, and that it was relatively easy to mess with the software, or completely mess UP the software. I knew that it could run Flash (How you like them Apples?). I knew that I could use it for GPS, web browsing, reading books, playing stupid games, viewing PDFs and that there were drum machine apps...
Running BC, I can do all of the above, very well. I've installed launchers that make it a bit less "phony." and I've even impressed some iPad users that thought they had the best tablet on the market. I'm always being asked "What the hell is that?" And frankly, it's one of my favorite questions to answer...
I've had it for 1 month, and I'll admit, I still haven't tried NVFlashing anything yet. I've downloaded all the files necessary (to my PC, lol) but find that leaving well enough alone might be best for me, for now.

From the kernel section.
1. Using your PC, download appropriate kernel. Or you can just download it straight into your gtab. Should be in folder called "download".
2. Boot into CWM recovery.
3. Navigate to where the kernel zip file and select.
4. Watch it install into your gtab. Should take about 10 seconds.
5. Reboot and enjoy.
Between 4 and 5 should be "from the cwm home screen navigate to advance and then select wipe davlik cash." I believe both pershoot and clemsyn recommend doing this post new kernel flash.
P.s. The site looks good, you have been quite the busy beaver since last night.

I'll be the first to admit I'm a dummy, too.
I got my gtab months ago and had flashed in every rom in existent. Didn't even pay attention to the 1.1/1.2 thing until last week. Then a couple days ago I flashed in the honeycomb rom from a 1.1 rom and actually bricked my gtab for the first time. This was what I needed to push me to perform nvflash.
The reason a lot of people are intiminated by nvflash is because, frankly, all the instructions out there just seem too complicated.
Hopefully, my site is a bit more easy to understand.

I'm tentative to NVFlash because most softbrick threads contain the words "I tried NVFlashing... and now I'm stuck in APX boot loop" etc.
Here's another section you may want to include...but it may be to comprehensive for you to write and link to all the relevent pages, but a basic "known G-Tablet issues" page. Include stuff like the .nomedia fix for media files on the external SD card. I'm getting tired of people asking where their files went. Or the screen angles, occasional phantom audio static issues, the battery meter from hell issue (not charging to 100%, staying at 100%, etc)
It would just be nice to have a troubleshooting section for problems that are inherent with the G-Tablet itself, regardless of what Rom you are running. Everyone has the battery indicator issue, the audio static doesn't descriminate against any specific roms, and the .nomedia fix isn't a bad thing to have on every external SD card.
screen angles...yea, refer them to the disclaimer page, or the hundreds of product reviews that illustrate how terrible it is.

goodintentions said:
The reason a lot of people are intiminated by nvflash is because, frankly, all the instructions out there just seem too complicated.
Hopefully, my site is a bit more easy to understand.
Click to expand...
Click to collapse
Totally true. I would read and read and I never feel like I had a good grasp on it until I finally just used it and realized its just program controlled by a batch file. Its easier than using a happy bake oven.

Mantara said:
Totally true. I would read and read and I never feel like I had a good grasp on it until I finally just used it and realized its just program controlled by a batch file. Its easier than using a happy bake oven.
Click to expand...
Click to collapse
must be Canadian...we had "Easy Bake Ovens." As long as you're referring ot the devices that use the power of a 100 watt light bulb to make the worst tasting baked goods you've ever forced your parents to taste.
You think the Canucks will finish it out tonight? I'd like to see them win, but I'd prefer if it gets dragged out a bit. Now that the Miami Heat show is over, it would be nice if Hockey were the only relevent sport to discuss on Sports Center.

very impressive, keep up the good work!

Nextbook Next7 and Next6 Custom ROM's

I am hoping to get a custom ROM made for both the Next6 and Next7, so if anyone would like to help here are the factory ROM's.
http://www.multiupload.com/6BY8BVS5BJ---Next7's Factory ROM
http://www.megaupload.com/?d=7V8MNSFI---Next6's Factory ROM

Right now my friend and I are working on making the Next6 have a full read/write partition with permanent root access.

I'm interested. The Next6 is on sale at Big Lots for $149...
I'm looking to pick one up. Please keep m posted!

TinkerToyTommy said:
I'm interested. The Next6 is on sale at Big Lots for $149...
I'm looking to pick one up. Please keep m posted!
Click to expand...
Click to collapse
Same here...

subscribed

I just got mine yesterday and subscribed to this thread. Please keep us informed.

Li'm currently counting down the minutes till biglots opens. in a rush to cash my check, and grab my new cheapo tablet, to be home in time to go to my kids dr appointment.
anyone got a full list of specs on the next6?
EDIT: z4root works perfectly. Now I'm waiting on this ota firmware update to download.
It feels sluggish compared to my hd2 but I expected that. But it does render HD video quite nicely. Rooting was a breeze, and if you pick it up at biglots, be sure to splurge 15 extra for an 8gb SD card.

I spoke to the company today because my OTA has been trying to download for 2 days.
Apparently the OTA only changes the Boarder Books to a different carries since Boarders is closed. IT DOES NOT UPGRADE THE FIRMWARE OR OS.
Please let us know of any ROMS available on this device that would be very helpful.

nathonix said:
Li'm currently counting down the minutes till biglots opens. in a rush to cash my check, and grab my new cheapo tablet, to be home in time to go to my kids dr appointment.
anyone got a full list of specs on the next6?
EDIT: z4root works perfectly. Now I'm waiting on this ota firmware update to download.
It feels sluggish compared to my hd2 but I expected that. But it does render HD video quite nicely. Rooting was a breeze, and if you pick it up at biglots, be sure to splurge 15 extra for an 8gb SD card.
Click to expand...
Click to collapse
Were you able to get a perminent root with z4root? I could only get a temporary root to work. What tools to use for a perminent solution
Got my next6 a day ago. Thanks all for the BigLots tip.

i think the way the image is stored on the tablet you'll have to flash a rom that is already rooted. Im not very familiar with cooking roms but i know you'll have to use afptool to unpack the image make the changes recreate the crc for the image and repack it.

From what I've been able to glean from frantic web searching, the system partition is cramfs and is read only. Temporary root only.
Also, its possible to access the recovery menu using adb reboot recovery, but its not of much use since the thing only has two dpad buttons.
Sent from my HD2

Next 6
I am very interested in this also ; I have tried to run some of the next 2 & 3 roms on this device (and they boot) but they don't really work right (IE: the touch screen doesn't work)
hopefully we can get this going!

i've got the rom dumped, just having a spot of bother mounting a cramfs file under ubuntu.
since i've last posted i found out a bit more about the hardware involved, and how its more or less a generic 7 inch rockchip tablet, minus a few buttons, which means a good majority of the work has already been done.
Required Reading for those interested;
http://wiki.archosfans.com/index.php?title=Dump_your_Home_Tablet_rom_and_create_a_custom_rom
bit of difference is the rkupdater program doesn't work unless you can get the tab into a flasher mode of some sort. However, if you just drop the update.img in the sdcard root and insert the card while the tab is running, it seems to kick into the updater properly.

hold down the right hand arrow
with the Pad turned off hold the right hand arrow to put the tablet into update mode ; then you can use the RKAndroidBatchUpgrade.exe..... (you do need the USB driver - found on the first page of the next2 next3 thread)

orignialpost said:
kentisevil said:
with the Pad turned off hold the right hand arrow to put the tablet into update mode ; then you can use the RKAndroidBatchUpgrade.exe..... (you do need the USB driver - found on the first page of the next2 next3 thread)
Click to expand...
Click to collapse
thanks. figured out through trial and error if i held both facebuttons and hit the reset while it was plugged up, it'd get into update mode.
your way needs less buttons. still at a loss because while i can dump the update.img and extract it, i cant seem to open up the system.img inside of it.
any suggestions? i pulled it using rkdump.
EDIT: nvm got it, had to pull the system.img from the device separately and add it back to update.img
long story short, i've got market, will be working on root next.
Click to expand...
Click to collapse
here ya go, (Next6)regular rom + market, still haven't got root worked out quite yet.

is this for the next6 or 7?
Oh I see now this is a rom for a next6

Next6 Base rom for editing
heres a stock copy of update.img with an editable system.img if you feel like adding your own apps or customizing it a bit further.
happy modding

I got one of these bad boys today and its a pretty decent little fellow.
I think with a root and well made custom rom it can really shine.
EDIT, does anyone know a way to change the icons they used? I dont really care for them because they look warped and garrish. I did manage to replace the launcher with launcherPro, "adw would crash and default to a debug launcher".
Also does anyone know how one could update SAM? Can I just reinstall the apk and it replace teh factory installed one? Also is there any better marketplaces than SAM? It seems kinda limited and lacking.

I was wondering if it's possible to upgrade the next6 from 2.1 to 2.2/3~
I'm not requesting it or anything as I personally don't know anything about android or how the next6's rom works.
Thanks

I believe it has to be rooted before you can upgrade the firmware to another version.
Also I have noticed a issue with the custom rom above. I cannot download any apps on the marketplace for some reason. Anyone know how I could clear its cache or reset this device?
EDIT: If I do a "factory reset" though the privacy section in settings, it seems to fix the market. Of course this completely wipes the device, also the market seems to break the same way again, extremely easily.
Basically you can download a few apps, go to the homescreen, then come back to find that you magically cannot download ANY applications. Ive tried killing the market app using the advance task manager, ive tried clearing the markets cache, and even restarting the device. The only thing that works is completely restoring the device. I am hoping that you will be able to fix it, or tell me how to fix it. XD
I installed the following applications. Not sure if this matters, but it seems like market breaks when I make ADW the default launcher.
ADW Launcher
Nook
Also I have a SD card in the unit.
EDIT:
I have rooted out the cause of the problem, changing the default homescreen/launcher seems to screw with market. So while you can install and use another launcher, you CANNOT set it as the default without it screwing up the android market.
EDIT:
Humm, well color me confused, because last night I managed to switch the home launcher without it interfearing with market. But this morning when I booted up the device I could not download any applications. Could it be possible that it is deleting key files when I restart the device?

Suggestions for wonderful experts helping us noobies

Yes, I definitely mean “wonderful” and “experts.” It is astonishing how much time, effort, and expertise the people who write the ROMs, etc., do for others, just to help us enjoy our cellphones. So, it is with no disrespect that I offer these comments on the instructions the experts give to us noobies to help us try to make our phones work better when they post “complete” instructions about how go to about this.
#1 – Odin.
There’s lots of advice to get Odin, but there are lots of Odin versions out there. Usually (generally in the computer world) what works when there’s a recommendation to get a program is to find the latest version. Even if a forum posting has a link to get a program, we figure that was the latest version available when the post was made and it still makes sense to get the currently latest version. That doesn’t work here. The latest Odin version I found was Odin 4.28. 4.28 totally fails to recognize my Samsung Droid Charge. But, if I use the ones referenced in the postings here (e.g. Odin3 v1.85) it recognizes my phone immediately. I understand the feeling that if we’re noobies we should just follow the directions exactly as written, but a little footnote about how this is different than everything else with computers would help.
I’m sure it isn’t true, but Odin seems to come from a mystical cloud location without any existence in our 3 dimensional universe. So, there seems to be no home website to explain that the latest version shouldn’t necessarily be used by everybody. And, there seems to be nobody on the forum who takes credit for upgrading Odin. Very mysterious.
Also – there’s at least three ways I’ve seen adamantly expressed as the proper way to connect a phone to Odin. #1 – simply attach the phone to the computer in the usual “download” mode, and Odin will find it.
#2 – Take out the phone battery for 5 seconds, replace it, then boot into recovery mode by holding down the up-volume, power, and home keys until “Samsung” flashes twice.
#3 – Take out the battery and don’t return it. Plug the phone into the computer, booting into recovery mode like #2.
As far as I can tell, #2 and #3 were needed for prior versions of Odin. Still, we noobies do Google this process, and it’s scary getting these conflicting directions about how to proceed. So, since you are obviously trying to make things less scary and confusing for us, you could mention this too.
Part of the problem is that there are various “Here’s how to replace your stock ROM with a better one” postings. Maybe each of them works perfectly, and there are many paths to enlightenment. Still, it’s worrisome for a noobie to try to figure out which of these paths to bet our phone on. (Of course, it’s also difficult for people trying to actually achieve spiritual enlightenment to decide on a path, so maybe this confusion is just an inevitable part of human experience.)
(cont. below)

#2 – CWM – Clock Work Mod.
I’m still confused about the need and timing of this one. Some sources say it’s entirely optional, just allowing other cool stuff done later. Others seem to say it’s important to install (flash through Odin) this before installing the new ROM. And, then there seem to be some ROMs that Odin can flash that do it all at the same time. And, then, there’s the issue of what order things are to be done in. If we just use Odin to flash a new Gingerbread ROM, can we, or should we, use Odin to flash in CWM?
As a noobie, I’m inclined to the “the less I mess with, the less chance I have of screwing everything up.” So, I think I’d like to skip the CWM while installing my new ROM, and wait to use CWM until I find some additional cool feature I can’t add without it.
#3 – ROM’s.
Where’s Consumer Reports when we need them? There are apparently various ROM’s we could use to improve our phones (e.g. Samsung Droid Charge). They are listed with somewhat cryptic explanations. Those explanations are probably perfectly explanatory for experts, but as a Noobie I don’t get a clear sense of direction from reading them. For example, Android 2.2 ROM’s (Froyo) are still listed, along with 2.3 (Gingerbread). Why would anybody want 2.2 if 2.3 is available? I assume there’s some reason I should be considering, but have no idea what it is. Among the 2.3’s, there’s also the “bloated” vs. “debloated” versions. Many of the unremovable (until rooted) stock apps seem to be both useless and resource drainers. But, I don’t know if I’m ready to give up all of them. And, the “debloated” versions are written by programmers, not people who want to devote their lives to writing up detailed commentaries about what is, and is not, debloated and why. Is there any reason not to just keep all the stock apps, and freeze or uninstall them with Titanium Backup later, as I identify the ones I do not want?
I feel anxious when I read somebody’s post about their newly released ROM, with lots of compliments, then comments that some feature now isn’t working. It’s hard enough to get answers about how to deal with the stock ROM.
I’m also confused about the difference between the “kernal” and the “ROM”. My impression is that “kernal” is which version of Android we use. “ROM” is broader, including extra’s like CDM and CDW, and Voodoo, etc. Or, not?
Part of the problem, obviously, is that the ROM writers have to do a different version for every [email protected]#$%^&*! phone that is made. Apparently even with the Samsung Galaxy family, there are enough differences that the ROM’s are customized for each one. (My prior phone was a Vibrant.) I am grateful that we have choices, and that these ROM’s are available, at all, but it would help to get a little more commentary (i.e. recommendations) about which ones are best for those of us just wanting a better ROM.
#4 – Voodoo. This is like the other issues. It seems like a great thing, to make the file system more efficient and do things like improve the sound system. But, it’s also confusing about when/if to install it in relation to the general ROM update.
So, maybe one of the wonderful experts will clarify these things here, or tweak their general instructions, for the benefit of noobies. Regardless, I again express my appreciation for all they’ve done for us.

There's a whole lot of "it depends" in this.
#1 - Odin may be up to 4.28, but Odin3 is newer than Odin. That's pretty self explanatory on its own.
#2 - You need CWM. Period. But, if you are flashing a full Odin ROM, it already comes with it, so you won't have to go into it unless you want to flash a theme or a new kernel. If you are installing a CWM ROM image, you need to flash CWM first.
#3 - Froyo (2.2) is still the only offical release for this phone. Gingerbread (2.3) is coming, but it's still in beta, and not officially released. The only GB releases we have are leaked and are not official final builds, therefore, they are not guaranteed to be of the quality or stability of Froyo, and, more importantly for us, there is no source available for the GB releases yet, so we don't have a lot of the cool tweaks available. So, it really does depend on what you are after.
#4 - All the current ROMs pretty much support it out of the box. If you are going with a stock ROM instead, you need a Voodoo enabled kernel to activate it. If you're ever in doubt of whether you have it and if it's enabled, install Voodoo Control and look at the lagfix section of the app.

I built a web page that has compiled all of the software you need to root, kernel update, ROM, and recover your Droid Charge with direct links to all of the software in one place.
http://www.toms-world.org/android
Plus it comes with very detailed instructions on how to do any one the activities mentioned above.
For those experts who do know how to do all of this, I'd like to see some collaboration and opinions on my directions. I'm only one person so I can't think of everything that could be added as far as a tutorial.
My idea is that a lot of us that know how to do this stuff should start a place where people can find the information they need for the Droid Charge all in one place without having to go from thread to thread, page to page, etc. Having it all in one place would benefit the Droid Charge community greatly.

Thanks for the replies.
Also, answering my own questions,
Not only is CWM necessary, but the remove battery 1st instructions, at:
http://forum.xda-developers.com/showpost.php?p=14692818&postcount=1
are correct. The other instructions I found that didn't include this stop didn't work -- Odin just sat there.
Also, at about page 11 of that xda thread, it says (correctly) that after ODIN says it's done, it's OK to unplug your phone, despite the large, brightly colored screen that says "Downloading... Do not turn off Target!!!"
Also, the kernal is different than the OS. So, first we find and install a rooted kernal (I guess this is like the most fundamental part of the phone's operating system), then pick a ROM (i.e. version of Android) to install.
Yes, now that you pointed it out, I agree it should have been obvious that ODIN3 is a later family version of ODIN, so no matter how high the version of ODIN we find, it's not going to be up the ODIN3 level. ...sigh

In the case of loading GummyCharged, you don't need to pick a kernel. The GummyCharged package contains an already rooted kernel (iMoseyOn's Lean Droid Charge Kernel) so basically if you load GummyCharged you have a kernel flashed along side it.
The only time you have to flash a new kernel is if you want to run a different kernel than the one contained in your ROM. Or if you want to update the kernel to a newer version of the kernel.
The kernel is the heart and soul of an operating system. It does all of the work in coordinating memory and process allocation. Think of it as a traffic cop.

trparky said:
In the case of loading GummyCharged, you don't need to pick a kernel...
Click to expand...
Click to collapse
Thanks. Your description of the kernel is much better than mine.
Another bit of noobie confusion:
The GummyCharged thread at
http://forum.xda-developers.com/showthread.php?t=1163123
says to install through CWM, after rooting. So, I already installed a new kernal, so I could have root.
As I understand better, now, I hope -- even with GummyCharged -- I had two choices, as there are two GummyCharged versions available. One is the two-step process (new kernal, then new OS). The other is to do both at the same time, through ODIN, which would have been easier.
I did install a new kernal, through CDW, seeing that path more clearly.
http://forum.xda-developers.com/showthread.php?t=1104634
Just a note that when my phone rebooted, Titanium Backup said I did not have root privileges. On a hunch, I just rebooted again, and that solved the problem. TB is happy, and so am I.
Then install a new OS through CWM.

Another thread that might have some useful information for you can be found here -> http://rootzwiki.com/showthread.php?4643-HOW-TO-quot-Clean-quot-install-GummyCharged-FE-2.0. Theres a lot there (maybe too much?) but if nothing else there are a number of useful links. I hope it helps!
Off topic: trparky I tried to send you a pm yesterday but my computer was acting up - not sure if you got it or not.

Thanks for all the help. Everything seems to be fine. This is just sort of a summary & wind-up post of another noobie's experience and successful quest for cellphone happiness.
First, there seem to be three ways to do scary things to the e-guts of my cellphone.
#1 -- Odin3 (a.k.a. Odin, but Odin3 v.x is the one that works for Samsung/Verizon Droid Charge [SDC]). Odin3 runs on the computer, with the cellphone properly tethered to the computer, and can insert stuff, like CWM. So, mostly the first step is to use Odin3 to insert CWM (superseding the stock recovery program). From some post it seemed it's possible to skip this step and do everything from Odin3, but that post also said that approach wasn't for noobies, even though it seemed easier to me. Odin3 is an elegant program, but you have to find somebody's Betty Crocker instructions for how to use it.
#2 -- Use the ordinary SDC file tethering to put .zip files onto the SDCard, because CWM uses those to install things like kernels and OS's (versions of Android). Sometimes the kernel and OS come bundled. Sometimes not. I ended up flashing a kernel first, then an OS with a bundled kernel, and everything seems fine.
#3 -- there's some other program, starting with an "H" that can also work like Odin, I think, but I ended up anxious enough figuring out #1 and #2, so didn't want to learn a whole other approach that might, or might not, somehow have been better, so I ignored this approach.
After I had my new root kernel, I used Titanium backup to freeze the bloatware. At that point I sort of chickened/burned out because there were too many choices of which version of Android to flash. I decided I didn't really need any of them, since my phone would be efficient enough without the bloatware running to give me everything I needed. What originally got me to start flashing my Android phone was when I would (repeatedly) receive calls on my old Samsung Vibrant, but the phone was so busy doing some [email protected]#$%^&*! thing that it wouldn't let me answer the call. With a more advanced phone (my new SDC), and frozen bloatware, I was confident I wouldn't have that problem, so just stopped there ... ... ... until I was horrified to receive another call which my SDC told me about but was too busy doing some [email protected]#$%^&*! thing that it wouldn't let me answer the call. OMG, it's happening again! At that point the choice of which version of Android to use because less important, because I was sure that nobody's custom Android would let that happen. So, I went with the GummyCharged Froyo [GummyChargedFE_2.0.zip]. At this point, I'd worked with CWM enough that it was all easy. Downloaded the file, copied it to my SDCard, booted to recovery, erased files & Dalvik cache, flashed the GummyCharged, and restarted. Lovely.
One nice aspect I'd not anticipated was that somebody has thoughtfully improved the process, so immediately my phone started re-downloading and installing the apps I had before. It's kind of a hassle to have to re-do all that manually, so special chops/thanks to the GummyCharged team for that feature. My phone works fine. I've tried, and happily failed, to make it too busy to let me answer a call.
What's left? I have to make donations to the Gummycharged people, whose software I now use, and the person who tweaked CWM that I use. It feels like I should make a donation to the Odin3 trolls, but haven't seem a request for that, nor have any who they are or how to do that.
I'll also be keeping my eye on the developing Gingerbread kernels, occasionally, until it looks like those are so mature that there's no reason to not confidently install & flash (through Odin or CWM, both of which I not feel fairly comfortable with) the upgrade.
On the off chance that anybody's still reading this, I do have one last question:
Can I delete the GummyCharged .zip file from my SDCard. I remember, back when I flashed my Vibrant, that I later deleted a seemingly useless .zip file called "update.zip", and that caused a problem. File isn't huge, so except for my mild OCD, no big problem in just leaving it there.
Thanks, again, to the wonderful experts who've helped me and so many others through this.

angelsix said:
...
#3 -- there's some other program, starting with an "H" that can also work like Odin, I think, but I ended up anxious enough figuring out #1 and #2, so didn't want to learn a whole other approach that might, or might not, somehow have been better, so I ignored this approach.
Click to expand...
Click to collapse
I believe the program is called Heimdall - this is more often associated with Mac users, as ODIN is a Windows program.
angelsix said:
...
One nice aspect I'd not anticipated was that somebody has thoughtfully improved the process, so immediately my phone started re-downloading and installing the apps I had before.
Click to expand...
Click to collapse
I'm not positive, but I believe this to be more of a Google thing. Whatever apps you've downloaded from the market are linked to the google account used on the phone, so once you sign back in on your phone post-flash, those apps (whatever ended up being stored as downloaded-by-you by google at least) start getting pushed to your phone.
angelsix said:
...
On the off chance that anybody's still reading this, I do have one last question:
Can I delete the GummyCharged .zip file from my SDCard. I remember, back when I flashed my Vibrant, that I later deleted a seemingly useless .zip file called "update.zip", and that caused a problem. File isn't huge, so except for my mild OCD, no big problem in just leaving it there.
Click to expand...
Click to collapse
You can delete the file, but this is essentially the installer file - if you ever have need to re-install it later on, you will need that (or a more up-to-date one if such a thing exists) file again. I tend to be an electronic pack rat myself, but you can delete the file from your SD card without any immediate adverse effects. If I remember right, the "update.zip" of old was associated with some earlier variants of CWM - without it you would not be able to get to the "custom" recovery (i.e. CWM) to flash things. Seems like such things are no longer necessary anymore, at least not with the recent versions.

dwitherell said:
I'm not positive, but I believe this to be more of a Google thing. Whatever apps you've downloaded from the market are linked to the google account used on the phone, so once you sign back in on your phone post-flash, those apps (whatever ended up being stored as downloaded-by-you by google at least) start getting pushed to your phone.
Click to expand...
Click to collapse
That is correct, and it's something that I strongly dislike, as I have installed plenty of things from the Market that I have since uninstalled and no desire to restore. If you skip account setup when you are first setting up the phone, and then manually go into Settings->Accounts & Sync, it will skip this, which is yet another reason to like aftermarket roms, as the stock roms will not allow you to get to the launcher until you set up a Google Account.