Related
I am having a problem with switching ROMs on my sensation which just started a few days ago. I am currently running ARHD 3.1.1 and it is very stable and I have had no problems whatsoever, but like many here, I like trying out different and new ROMs. Anyways, I did a backup and installed ARHD 3.6.2, and it was forcing close on several apps, and kept getting soft reboots, so I tried RCMix's, and it would load and automatically install some apps and settings that I had on my previous ROM, and it was working fine, but then I started getting soft reboots when I would open any app, so I tried about 2 other ROMs (S3n5eay/Pyramid3D) and same thing, so being fed up I restored my backup and then I began to have superuser problems, so I unistalled updates, cleared data, and still was unable to gain root access. I kept clearing data, installed superuser 2.3.6 then 3.02 and finally got root again, but everytime I reboot I lose root. I then again tried different ROMs, and same thing is happening. I have used superwipe script, ARHD's wipe script, P3D wipe script, formated from CWM, and no matter what, I am still unable to keep a new ROM and keep losing root with my backup. I'm sorry for a long post, but can anyone please help me figure this out. I have upgraded ROMs many a times in the past on this phone and others, and have never experienced these problems, so can someone please help me.
I kinda had the same problem with you, with that being root was the problem. But the ROM's are pre-rooted so that shouldn't be a problem. Try to flash the root file again, until it is succesfull flashed.
Thanks. I'll go ahead and try that.
Sent from Sensational toy running ARHD 3.1.1
Geez, that sounds horrible, man. It never ceases to surprise me how different every one of these seemingly identical devices are.
West0000 said:
Geez, that sounds horrible, man. It never ceases to surprise me how different every one of these seemingly identical devices are.
Click to expand...
Click to collapse
Well for the most part everyone downloads different software. For that just one of the factors that make us all somewhat "different" this is why everyone has some sort of problems here and there.
Most times a fix can be a reboot or reinstall of the app. Even clearing of caches helps because of data conflicts on the phone. Especially when someone like me that flashes different ROMS, that's why nandroids and backups are key so that if you fudge up your phone, you can always revert back to your nandroid.
And for all the people who are trying to revert back to their nandroid after flashing a different rom, you need to use the wipe data scripts in ARHD or Coredroid to reformat the ext4 before reverting your nandroid. Just a FYI.
All I know is that wiping everything before flashing a new ROM does not guarantee that you won't get FCs and soft reboots.
For example, I did a factory reset, wiped cache, wiped dalvik, and then did superwipe (yes I know redundant), and then flashed a ROM and I thought nothing could go wrong. Then while setting up I went ahead and setup my google account during the setup process, and once I was finished I began restoring my apps+data from Titanium Backup. While that was happening Market started auto-reinstalling my apps, and this instantly conflicted with the fact that I was doing the same thing from TB. It caused a few of my apps to FC all the time. So make sure you skip adding your google account during setup.
You can also get stuff to go haywire if you restore system data from TB. Doing so will conflict with the ROM and cause FCs and reboots. For example, I didn't know how to easily back up texts and contacts for a while, and I would go in to TB and restore everything that said something like mms, messages, texts, messages widget, etc. and doing so actually caused my messages to go haywire. Same thing with contacts. The only things you should be restoring from TB are your user apps+data. As already noted, you should also superwipe before restoring a nandroid because it is exactly like flashing a new ROM. If you're on a ROM you just flashed that has 1 version of superuser, and then you go straight into recovery and restore a nandroid without wiping everything first (and has a different version of superuser), you're going to get issues with superuser.
The rule of thumb when it comes to avoiding FCs and reboots is to avoid letting data conflict. Don't mix ROM data, don't mix app data, don't restore system settings from your old ROM on your new one, etc.
Believe me, I have attempted everything without any success. I guess I'm going to stay on my current ROM until I get the time to deal with all of this, and hoping that for whatever reason I don't have to reboot my phone, or that it randomly reboots in order not to deal with the problems. I have always wiped going/coming from different ROMs, but have never experienced this before, and it is very frustrating especially when I like to try different developers mods. I'll keep attempting to try to figure this out, and if I find a solution, I will update.
cbrvnm said:
Believe me, I have attempted everything without any success. I guess I'm going to stay on my current ROM until I get the time to deal with all of this, and hoping that for whatever reason I don't have to reboot my phone, or that it randomly reboots in order not to deal with the problems. I have always wiped going/coming from different ROMs, but have never experienced this before, and it is very frustrating especially when I like to try different developers mods. I'll keep attempting to try to figure this out, and if I find a solution, I will update.
Click to expand...
Click to collapse
Keep trying different ROMs and different strategies of when you wipe/restore stuff. It's quite interesting that theoretically identical phones can have different responses to the exact same actions. 2 people can install a ROM in the exact same way and for 1 it will work, the other it won't. You just gotta work it out until you figure out how to manage your particular issues.
Yeah, I hear you. It's just very frustrating when in the past I have switched ROMs on all the phones that I have ever owned without any problems until now. But I'll try different methods and see what happens. I appreciate everyones input. Thanks. Oh, and if anybody has any other suggestions, please, share.
Ok, I was able to get Pyramid3D v0.8.0 working so far. I flashed with superwipe about 3 times then installed the ROM. I did not sign into my account, and installed my apps from titanium first, and then signed in. I got several reboots with setcpu so I unistalled it. I also get a few market fcs. Now the problem that I have is that I installed the 4EXT recovery and my phone is unable to play my music files through any of the music players. I am able to open them with astro, but not music player. But I guess I'll try to figure this one out now. Thanks for the advice.
The Janitor Mop said:
All I know is that wiping everything before flashing a new ROM does not guarantee that you won't get FCs and soft reboots.
For example, I did a factory reset, wiped cache, wiped dalvik, and then did superwipe (yes I know redundant), and then flashed a ROM and I thought nothing could go wrong. Then while setting up I went ahead and setup my google account during the setup process, and once I was finished I began restoring my apps+data from Titanium Backup. While that was happening Market started auto-reinstalling my apps, and this instantly conflicted with the fact that I was doing the same thing from TB. It caused a few of my apps to FC all the time. So make sure you skip adding your google account during setup.
You can also get stuff to go haywire if you restore system data from TB. Doing so will conflict with the ROM and cause FCs and reboots. For example, I didn't know how to easily back up texts and contacts for a while, and I would go in to TB and restore everything that said something like mms, messages, texts, messages widget, etc. and doing so actually caused my messages to go haywire. Same thing with contacts. The only things you should be restoring from TB are your user apps+data. As already noted, you should also superwipe before restoring a nandroid because it is exactly like flashing a new ROM. If you're on a ROM you just flashed that has 1 version of superuser, and then you go straight into recovery and restore a nandroid without wiping everything first (and has a different version of superuser), you're going to get issues with superuser.
The rule of thumb when it comes to avoiding FCs and reboots is to avoid letting data conflict. Don't mix ROM data, don't mix app data, don't restore system settings from your old ROM on your new one, etc.
Click to expand...
Click to collapse
Good post. I didn't realize I should be doing so much wiping even before restoring a backup.
Incidentally, I'm kicking myself now, but in the excitement of flashing my first custom ROM, I forgot to backup my original system. Doh. It's the only time I haven't backed up before changing ROMs, but that's arguably the most important backup to make.
Hi smart people!
Just to throw it out there, I am not very tech savvy so excuse me if I misuse terms and such.
I believe I completely bricked my phone (I hope I'm wrong). After I downloaded Cyanogen through ROM Manager, my finger stumbled on the "continue" or "next" button or whatever WITHOUT checking the boxes to clear data, etc. I believe this is where I went wrong as I think I followed all other steps correctly (fyi I used the one click recovery flasher and made a back up).
Now when I turn on my phone, it goes from the stock LG loading screen to a modified LG loading screen (Cyanogen's I'm assuming) but it gets stuck there.
I've been searching on the different threads for quite a while and pressing the different combinations of volume up/volume down/power don't seem to do anything. I cannot get to the recovery screen.
Please help! I will forever be indebted to all of you. I am stupid and shouldn't have tried to do this on my own. Thanks in advance
What you will need to do is flash CWM via NVflash then boot into CWm and install your ROM.
If you flash CWM via ROM Manager it causes problems like what you're describing, I know from my own experience of following a friends instructions and doing that then having that exact issue. After getting my phone working again I then started to frequent the boards here.
As soon as I read the first couple lines I saw rom manager and saw the problem, you to search something that you have typed out all within this thread... I'm not near a computer but you should just search through these threads and you find your solution in detailed description. You need to get recovery from nvflasher just search that
Sent from my LG-P999 using xda premium
thanks for your replies
thank you to both of you for your prompt replies. i will try doing this within the next couple hours and post any results. this is the thread i found with the information you guys gave: http://forum.xda-developers.com/showthread.php?t=1058649
thanks again
No, that's not for G2x. Go here: http://forum.xda-developers.com/showthread.php?t=1056847
Ya it needs to be the one that gunnman wrote out for people.
Sent from my LG-P999 using xda premium
Hey guys...on step #10, it says to "select 'have disk'" but i do not see that option in the list.
Thanks
okay now i realize i should have been doing the cwm recovery. sorry guys and thanks again
reboot error
hey guys,
I successfully was able to boot into cwm and then i restored a backup from yesterday. however when rebooting, it displays the LG logo and then the screen goes black and the back light flickers on and off. not quite sure what to do now...if you guys could let me know what i should do or post a link to another thread, i'd really appreciate it. i honestly have been going through other threads but i guess i'm just not competent enough to know which directions apply to my problem.....
thank you..hopefully this is the last time i'll have to bother you!
The back-up could be corrupt and since the one time I had a problem with a nandroid was when it was created after ROM Manager sent the info to CWM, that's likely the case. Just redownload CM7 to your SD card, along with Gapps, wipe system, data and cache then flash CM7 followed by Gapps.
justintheshark30 said:
hey guys,
I successfully was able to boot into cwm and then i restored a backup from yesterday. however when rebooting, it displays the LG logo and then the screen goes black and the back light flickers on and off. not quite sure what to do now...if you guys could let me know what i should do or post a link to another thread, i'd really appreciate it. i honestly have been going through other threads but i guess i'm just not competent enough to know which directions apply to my problem.....
thank you..hopefully this is the last time i'll have to bother you!
Click to expand...
Click to collapse
Have you wiped everything before restoring your backup through CWM? If not, boot into CWM, wipe data/factory reset, go to mounts and storage, format system, then go into advanced options, wipe delvik cache, then restore your backup.
I'm guessing you did a backup through rom manager, so if this doesn't work, you'll have to download a rom of your choice from the development section of this forum, load it onto your sd card through CWM although this is not recommended but you won't have any other choices, (to mount your sd card in CWM, go to mounts and storage, mount sd card), then wipe everything as mentioned above, then flash the new rom.
Or you can follow the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1248644 to flash 2.3.3 via nvflash to get a working phone for now until you learn how to properly flash custom roms.
Hope this helps
P.S. for future reference, you did not brick your phone, you got stuck in a boot loop, you know your phone is bricked when you don't see anything on the screen when you turn it on, usually it's just a software issue, but sometimes it could be hardware, for example I burned the motherboard on my previous android phone trying to customize it lol
jj_z1 said:
Have you wiped everything before restoring your backup through CWM? If not, boot into CWM, wipe data/factory reset, go to mounts and storage, format system, then go into advanced options, wipe delvik cache, then restore your backup.
I'm guessing you did a backup through rom manager, so if this doesn't work, you'll have to download a rom of your choice from the development section of this forum, load it onto your sd card through CWM although this is not recommended but you won't have any other choices, (to mount your sd card in CWM, go to mounts and storage, mount sd card), then wipe everything as mentioned above, then flash the new rom.
Or you can follow the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1248644 to flash 2.3.3 via nvflash to get a working phone for now until you learn how to properly flash custom roms.
Hope this helps
Click to expand...
Click to collapse
He's already flashed CWM the right way, and tried to restore from a nandroid. I already mentioned getting a different ROM, he's already stated that he got this all started trying to flash CM7. Please read the posts which have already been made, we don't need the same information being posted again, if someone already posted something and you feel it needs clarified then clarify but from what I can tell you read one post and that was it.
Волк said:
He's already flashed CWM the right way, and tried to restore from a nandroid. I already mentioned getting a different ROM, he's already stated that he got this all started trying to flash CM7. Please read the posts which have already been made, we don't need the same information being posted again, if someone already posted something and you feel it needs clarified then clarify but from what I can tell you read one post and that was it.
Click to expand...
Click to collapse
I really hate posting anything that doesn't have to do with anything phone related but I just couldn't stop myself from replying to your post!
1) I actually read all posts in the thread!
2) I did not in any way suggest that he didn't flash CWM the right way, I merely asked if he had done a full wipe before restoring his backup!!
3) Your reply was submitted while I was typing mine, so I'm sorry I didn't check the thread again before submitting my reply!!!
4) I'm well aware of what he tried to do already, but thanks for repeating it!!!!
5) If YOU read all previous posts you'll notice that my post does not exactly replicate any other, there's some new information in there that the OP might find useful!!!!!
6) From what I can tell, you need to work on your english and comprehension skills!!!!!!
To the OP, sorry for trolling your thread with this post, but I just couldn't help it, and to Bonk I hope you'll be the mature one and not reply to this post.
Is that to say you're immature? If one were to judge by the number of exclamation marks you have I'd say yes.
The only "new" thing was asking if he wiped before the restore, which, at this point, would be useless to ask as I already told him to make sure to wipe.
To the OP: How goes everything thus far?
thank you
that's what i ended up doing and it worked. thank you so much for all your help!
Волк said:
The back-up could be corrupt and since the one time I had a problem with a nandroid was when it was created after ROM Manager sent the info to CWM, that's likely the case. Just redownload CM7 to your SD card, along with Gapps, wipe system, data and cache then flash CM7 followed by Gapps.
Click to expand...
Click to collapse
And dalvik cache for good measure, even though it is stored on the cache partition and will probably get wiped when you wipe cache. Sometimes it's good to overdo thing's.
Unable to do anything!
Well i was playing with the phone, rooted and kept playing with different ROMS till i would have found a good stable one, but something happened, I ended up not being able to use any functions in cwm (apply update from..., backup and restore, install from zip). I wiped data/factory reset, cache partition, dalvik and i have the ROMS inside, i can see them in CWM. just can't read them. or any zip i use. what happened? is this bricked? if so do i have to go from scratch with the phone and use SDK?
efrembarrow said:
Well i was playing with the phone, rooted and kept playing with different ROMS till i would have found a good stable one, but something happened, I ended up not being able to use any functions in cwm (apply update from..., backup and restore, install from zip). I wiped data/factory reset, cache partition, dalvik and i have the ROMS inside, i can see them in CWM. just can't read them. or any zip i use. what happened? is this bricked? if so do i have to go from scratch with the phone and use SDK?
Click to expand...
Click to collapse
Start over. Do what it states here: http://forum.xda-developers.com/showthread.php?t=1248644
efrembarrow said:
Well i was playing with the phone, rooted and kept playing with different ROMS till i would have found a good stable one, but something happened, I ended up not being able to use any functions in cwm (apply update from..., backup and restore, install from zip). I wiped data/factory reset, cache partition, dalvik and i have the ROMS inside, i can see them in CWM. just can't read them. or any zip i use. what happened? is this bricked? if so do i have to go from scratch with the phone and use SDK?
Click to expand...
Click to collapse
Did you battery pull and start over?
Sent from my LG-P999 using xda premium
UNROOT help
Hello again smart people,
I was hoping we would never meet again (for the better) but unfortunately i must unroot my phone to receive work emails. I have tried unrooting my LG G2x multiple times but to no avail thus far.
Here is the process I have tried:
1) boot into recovery - wipe cache/data factory reset, wipe cache partition, wipe dalvik cache
2) restore - using stock rom i found online
3) flash stock recovery image using nvflash
4) (attempt to) unroot using superoneclick - AFTER GOING THROUGH MULTIPLE STEPS, IT SAYS "TRUE" UNDER "CHECKING IF ROOTED". (also, i know it is rooted because it says the phone already appears to be rooted when i try to root again).
Do you guys have any idea what the issue could be?
Thank you in advance...
I have a Verizon Galaxy Nexus (rooted stock 4.0.4). I decided I would test out Clockworkmod touch recovery before doing anything too serious with it. So, I made a backup, rebooted, deleted an app, went back to recovery, and restored my backup. But, while it was restoring my data, it suddenly stopped and said "Error while restoring /data!" I rebooted and, after waiting through a really long boot, it booted into a semi-reset version of my phone. All of the apps claim to be installed but will not start.
So, thinking it could be a touch recovery issue, I flashed an older version of clockworkmod recovery and tried restoring after clearing my data, cache, factory reset, and Dalvik cache. Still, the exact same thing happened. I also tried restoring older backups, but the exact same thing happened.
What is going on, and what should I do? Thank you for your time.
Eric_Eric_Eric said:
I have a Verizon Galaxy Nexus (rooted stock 4.0.4). I decided I would test out Clockworkmod touch recovery before doing anything too serious with it. So, I made a backup, rebooted, deleted an app, went back to recovery, and restored my backup. But, while it was restoring my data, it suddenly stopped and said "Error while restoring /data!" I rebooted and, after waiting through a really long boot, it booted into a semi-reset version of my phone. All of the apps claim to be installed but will not start.
So, thinking it could be a touch recovery issue, I flashed an older version of clockworkmod recovery and tried restoring after clearing my data, cache, factory reset, and Dalvik cache. Still, the exact same thing happened. I also tried restoring older backups, but the exact same thing happened.
What is going on, and what should I do? Thank you for your time.
Click to expand...
Click to collapse
There may have been a corruption in your data backup. Just delete that backup and make a new one.
Nope, I tried all three of my backups and had the same problem with all three. Plus, I can't simply make a new backup. I tried restoring to the backup and lost my stuff because it didn't finish restoring my data.
I'm having some issues with cwm too. Sometimes when I'm trying toi recover, it says "md5 mismatch", maybe its a linked problem?
Sent from my GT-S5830 using XDA
rommanager
Install rommanager.apk premium and, to me is to solve the problem
So, I think I figured it out. Apparently, I only get this error when my backup contains more than a certain number of apps (or possibly the /data is over a certain size). Granted, I do have over 350 apps, but why is CWM Recovery messing up while trying to restore a big backup? It really should not affect it, but it seems to. So, I will be backing up with Titanium for my apps, and making nandroid backups only when I have under about 350 apps installed. If anybody else has any insight, please share it with me. Thanks.
The Answer (I am pretty sure...)
Okay, I think I finally figured it out. The reason it was not restoring properly was because I had about 350 user apps installed. My guess is that, while restoring, the recovery (CWM recovery in my case) puts the /data onto the RAM, and the RAM is not large enough to hold that much at once. I deleted a lot of apps, backed up in CWM recovery, and restored back to the backup, and everything worked flawlessly. I am surprised that no one has ever had this problem. So, in the future, I am making Titanium backups of all my apps, batch uninstalling a bunch of them from within Titanium (so that I have under 300 at the most), and then making a backup. Then, I can flash a new ROM, recover, or whatever and finally use Titanium to put all my apps and data back. I just thought I would post this in case anyone else ever finds this problem. It was really frustrating for me, but the insufficient RAM theory seems to explain it. Post your thoughts on the matter.
Eric_Eric_Eric said:
I have a Verizon Galaxy Nexus (rooted stock 4.0.4). I decided I would test out Clockworkmod touch recovery before doing anything too serious with it. So, I made a backup, rebooted, deleted an app, went back to recovery, and restored my backup. But, while it was restoring my data, it suddenly stopped and said "Error while restoring /data!" I rebooted and, after waiting through a really long boot, it booted into a semi-reset version of my phone. All of the apps claim to be installed but will not start.
So, thinking it could be a touch recovery issue, I flashed an older version of clockworkmod recovery and tried restoring after clearing my data, cache, factory reset, and Dalvik cache. Still, the exact same thing happened. I also tried restoring older backups, but the exact same thing happened.
What is going on, and what should I do? Thank you for your time.
Click to expand...
Click to collapse
its better to use titanium backup application for you.user friendly and worthy..
So I left Apple, came to Android, rooted my VZW GS3. First time I've ever done anything like this, so I'm new to it. I backed up EVERYTHING using TiBu, did the IMEI backup, Full system/image backup using CWM, unlocked bootloader, etc. Then I flashed to Synergy r46 (august 20th - yesterday's release).
Now I'm at work and my back-up pulled my contacts via Verizon's server, but how do I get back EVERYTHING else? SMS/MMS logs, call logs, apps, app data, etc? Do I need to download TiBu again (fresh from google market) and then load my backups off my Ext-SD card, or what? I guess I'm a bit confused as to where my TiBu items were even stored/saved...I assume it was the ExtSD card, otherwise I would have lost them all upon flashing to Synergy, correct?
Any help to get all my apps and data back on my newly Synergized phone would be awesome!!!! Thanks in advance!!!
Yes download titanium and then point it to the directory you had your back ups saved to (its sd card by default, and which is your phone storage btw) then tab to backup/restore click the check, then once your app data populates, and select run next to restore apps and data.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------
And no flashing roms will not wipe all your user data unless you do a complete wipe.
Sent from my SCH-I535 using Tapatalk 2
I used titanuium backup pro to back up all my Apps and system data. And when I flash a new rom I just redownload titanium pro and it automatically restores all my Apps and system data. It is the easiest app I have used. So to answer ur question.....back up ur apps with titanium then after flashing a new rom go and redownload titanium and restore your system data and apps or just apps alone if that's what u prefer? Does that answer ur question or would u like more detailed instructions?
Sent from my SCH-I535 using xda app-developers app
Welcome to android!
Sent from my SCH-I535 using Tapatalk 2
Another very nice feature of Titanium Backup is its ability to pull data from CWM nandroids. There have been a few times where I was quick to flash a new rom without doing a backup of my apps. This has saved me much time from having to re-flash the nandroid backup, backup via TB, then re-flash to the new rom.
voodoomanx said:
And no flashing roms will not wipe all your user data unless you do a complete wipe.
Click to expand...
Click to collapse
This is one thing that scares me...I don't quite understand what's being wiped or how to perform a full wipe. I hope I don't do this on accident on day...When I flashed the ROM, I basically booted into CWM recovery and installed from there....I was unable to install by opening the ROMs ZIP file via ROM Manager. When I tried to install this way, it failed.
Can somebody confirm if I flashed correctly, just to put my worries to rest? Here's how I did it...
I backed everything up, unlocked bootloader, and tried to install Synergy r46 via ROM manager, but I had problem. I had the ZIP for the ROM downloaded to my Ext-SD card, like the installation instructions say. I then opened ROM Manager and went to "install ROM from SD card." The phone rebooted and opened in CWM to install...But kept having problems finding some "path" or something.
So I decide to wing it and rebooted into CWM. I cleared davik cache(sp?), then user data, then navigated to my Ext-SD and selected the ROM ZIP to install. Now, everything seems fine and it says it installed successfully, but I still think I installed in a way that wasn't described.
Is this a legit install and is this how most people flash ROMs, from booting directly into CWM, or should ROM manager have worked for me via "install ROM from SD card???" If so, why didn't ROM Manager work for me?
Rather urgent question: When I restore my items, do I want to click "RESTORE MISSING APPS + ALL SYSTEM DATA?" ill this restore the bloatware that was on my phone prior to flashing????? If so, is there any way around it
Thanks a bunch! Just waiting on an answer to the later questions before I restore.
Weioo said:
This is one thing that scares me...I don't quite understand what's being wiped or how to perform a full wipe. I hope I don't do this on accident on day...When I flashed the ROM, I basically booted into CWM recovery and installed from there....I was unable to install by opening the ROMs ZIP file via ROM Manager. When I tried to install this way, it failed.
Can somebody confirm if I flashed correctly, just to put my worries to rest? Here's how I did it...
I backed everything up, unlocked bootloader, and tried to install Synergy r46 via ROM manager, but I had problem. I had the ZIP for the ROM downloaded to my Ext-SD card, like the installation instructions say. I then opened ROM Manager and went to "install ROM from SD card." The phone rebooted and opened in CWM to install...But kept having problems finding some "path" or something.
So I decide to wing it and rebooted into CWM. I cleared davik cache(sp?), then user data, then navigated to my Ext-SD and selected the ROM ZIP to install. Now, everything seems fine and it says it installed successfully, but I still think I installed in a way that wasn't described.
Is this a legit install and is this how most people flash ROMs, from booting directly into CWM, or should ROM manager have worked for me via "install ROM from SD card???" If so, why didn't ROM Manager work for me?
Rather urgent question: When I restore my items, do I want to click "RESTORE MISSING APPS + ALL SYSTEM DATA?" ill this restore the bloatware that was on my phone prior to flashing????? If so, is there any way around it
Thanks a bunch! Just waiting on an answer to the later questions before I restore.
Click to expand...
Click to collapse
I am wondering if you didn't do the full wipe. If you are using CWM v6.0.1.0 then there is no option labeled "user data" it is "wipe data/factory reset" which is the full wipe like I mentioned.
As far as doing it correctly, as you may have already noticed there is more than one way to do about anything. Personally, I still use CWM v6.0.1.0 and flash the zips there.
P.S. I see you are enjoying your freedom of losing your apples!
Also, tell me how your r46 is working ... I have held off at r23 while they are playing around with kernels and ramdisk tweaks for awhile.
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
dan_joegibbsfan said:
I am wondering if you didn't do the full wipe. If you are using CWM v6.0.1.0 then there is no option labeled "user data" it is "wipe data/factory reset" which is the full wipe like I mentioned.
As far as doing it correctly, as you may have already noticed there is more than one way to do about anything. Personally, I still use CWM v6.0.1.0 and flash the zips there.
P.S. I see you are enjoying your freedom of losing your apples!
Also, tell me how your r46 is working ... I have held off at r23 while they are playing around with kernels and ramdisk tweaks for awhile.
Click to expand...
Click to collapse
I'm fairly certain I did "wipe data/factory reset," I just wasn't sure how it was labeled when I typed that out, but that's really ringing a bell. I think I may have gotten the errors before (using ROM Manager) because I hadn't factory reset? Seems to me I'm good to go! However, my question regarding TiBu still remains.
Edit: In regards to informing you about r46, I'm not sure what to report as I've never used a previous Synergy and have no idea how to compare, other than to the rooted stock ROM. I have heard reports of battery life being worse than the stock ROM, and I can confirm this. I've barely used the phone since I flashed to Synergy and it's dropped 15% battery life in ~3 hours. Seems faster than before but I'm unsure.
nguyenvn said:
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
Click to expand...
Click to collapse
I started getting that sort of behavior so I just restored back to my stock rooted backup and reflashed Synergy 1.7 r23 and then reflashed the theme I'm using. I thought my issues came from other modifications I had tried so I will try to remember to report back to this post tomorrow and tell you if I'm still having those similar issues or if I'm stable again.
dan_joegibbsfan said:
I started getting that sort of behavior so I just restored back to my stock rooted backup and reflashed Synergy 1.7 r23 and then reflashed the theme I'm using. I thought my issues came from other modifications I had tried so I will try to remember to report back to this post tomorrow and tell you if I'm still having those similar issues or if I'm stable again.
Click to expand...
Click to collapse
Was 1.7 r23 supposed to be a really stable release? I read through some of the Synergy thread and didn't see anyone having the issues I had. I felt like I was doing something wrong.
nguyenvn said:
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
Click to expand...
Click to collapse
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
voodoomanx said:
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I used the EZ-unlock app in the play store. I did see that a custom kernel was loaded however when i flashed back to my nandroid (stock rooted) I am back on the orignal kernel. Would the way I rooted have an effect on the reboots? I used the non flash method by Noxious Ninja.
voodoomanx said:
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I agree I have yet to have Synergy boot loop although I'm still on 1.7. I would try to wipe cache and dalvik cache and see if that helps or you could be over clocking to high.
Sent from my Transformer TF101 using xda premium
nguyenvn said:
Was 1.7 r23 supposed to be a really stable release? I read through some of the Synergy thread and didn't see anyone having the issues I had. I felt like I was doing something wrong.
Click to expand...
Click to collapse
I don't know the answer to that specifically. All I know was that I was stable before another modification I made (that said it wouldn't work but I tried it anyway). Since restoring from backup and reloading Synergy and theme I have not seen any weird rebooting anymore.
nguyenvn said:
Would the way I rooted have an effect on the reboots? I used the non flash method by Noxious Ninja.
Click to expand...
Click to collapse
I'm not familiar with that method. I've only used Odin, even when I did have to redo everything I used Odin to stock de-bloated rooted .md5 then CWM'd from there.
So I'm giving it another shot on r50. I made sure to clear dalvik, cache and data. After flashing It gave me the reboot problems again. I installed system tuner to change the cpu back to 1.5. Maybe it's from the overclock but we'll see how it goes. Is everyone leaving it overclocked on 1.9 not having issues?
nguyenvn said:
So I'm giving it another shot on r50. I made sure to clear dalvik, cache and data. After flashing It gave me the reboot problems again. I installed system tuner to change the cpu back to 1.5. Maybe it's from the overclock but we'll see how it goes. Is everyone leaving it overclocked on 1.9 not having issues?
Click to expand...
Click to collapse
That may very well be the issue. 1.9ghz is a very aggressive overclock, and i wouldn't be surprised if was unstable on a good number of phones. Synergy's supposed to boot at 1.5ghz max by default - I don't know whether that was successfully implemented. I personally think it's silly to OC such a capable phone, anyway. Back in the days of the Droid 1, an overclock from the stock 550mhz to 800mhz-900mhz was an enormous improvement. Today, the only thing OCing the S3 gets you is a <10% improvement in Quadrant, more heat, possible instability, and no perceptible difference outside of those silly synthetic benchmarks.
Anyway, in this thread, there seems to be a fair bit of confusion as far as what's what in the android partitions. I'll give you a short rundown.
"aboot" is what's referred to here as the bootloader. It checks to see whether the next partition in the boot sequence, "boot", is authorized. When you unlocked your bootloader, you overwrote aboot with a version that does not perform that check.
"boot" contains your kernel. If your ROM has a custom kernel, it contains a boot.img to overwrite boot.
"system" is the meat of the OS. This is primarily what ROMs flash.
"data" contains all of your apps and settings. When you perform a factory reset, you're reformatting data. If you're flashing a ROM that is significantly different from what you're on now, some of those old settings and data can cause errors, force closes, random reboots, and boot loops. When in doubt, wipe data before flashing a new ROM. When going from one version of a ROM to a newer, very similar version of the same ROM (nightly to nightly), you probably don't need to wipe data, but make a backup just in case. dalvik-cache is also in data; if you wipe data, you've automatically wiped the dalvik cache. It's redundant to wipe data and then wipe dalvik cache.
"cache" is just that, the cache partition. Clearing it won't make you loose anything, at least not anything Android won't silently replace.
So far it seems to be pretty stable on r50. I installed system tuner and brought it down to 1.5 Ghz. I'm not sure why 1.9 is set to default. Doesn't seem like a good idea to me. Thanks all for the help/advice.
So I was able to successfully root my AT&T HTC One X and decided I wanted to install the CM 10 ROM (1st ROM install). I did all the data backups with Titanium, downloaded the latest zip files from cyanogenMod (both the 12/13 and 12/14 nightly versions), transferred them to my phone, booted into recovery (TWRP), did a back-up, did a system wipe, flashed the ROM and then did a reboot. However, when it boots it gets stuck in the boot-up screen (bootloop) and doesn't do anything. I have read on this and it keeps saying to wipe system data again and flash the ROM again and it keeps doing this. I want to install this ROM, but I need some help. Any suggestions on what I did wrong?
Note: I accidentally posted this in the Android Q&A section, so I apologize for the double post. I just think this is probably the best place to get my answer.
Did you flash the boot.img?
I did, but incorrectly the first time. I flashed it the right way and everything is working good. Then only problem I have now is when restoring from Titanium Backup it gives me an error from a process called com.android.phone (I think that is what it said). So I wiped it again and rebooted and everything is fine. I can reinstall all the apps, but what could cause that? Could it be some of the data backed up doesn't cooperate with this ROM? Either way I love the CM10 ROM.
jon8105 said:
I did, but incorrectly the first time. I flashed it the right way and everything is working good. Then only problem I have now is when restoring from Titanium Backup it gives me an error from a process called com.android.phone (I think that is what it said). So I wiped it again and rebooted and everything is fine. I can reinstall all the apps, but what could cause that? Could it be some of the data backed up doesn't cooperate with this ROM? Either way I love the CM10 ROM.
Click to expand...
Click to collapse
if they are backups from sense, that *MAY* cause problems, but don't quote me on that. I don't use sense, can't say for sure
OK, maybe that is why. Not a big deal since I haven't had the One X too long. Thanks for the help guys.
Good to know