Related
Hello,
I need some help to get the new ICS update. I have a TF101 (no G), serial B80, with firmware HTK75.WW_epad-8.6.6.23.
Previously I was on 8.6.6.19 and used razorclaw to root it. Then I have done the wipe data, and installed 8.6.6.23.
When I boot with Power and Vol- then Vol+ to enter RCK mode I get the green android guy with exclamation mark.
When I boot with Power and Vol-, then Vol+ I get 2 options: Wipe data and android cold boot.
I used some apps to test if the device is root and they say no.
Sorry for my english, but it's not my main language.
Any idea to fix this?
The 8.6.6.23 is firmware for the 3G model. You will not see OTA since ICS is not released for G model yet.
You can try to manually install 8.5.6.21. You could also try rooting and installing cwm recovery and flash the ICS ROM
Thanks for the answer. I've searched around and it seems that I can't get back to 8.5.6.21.
When I try to install it I get the android guy with exclamation point.
I guess I have to wait for ICS on 3G model
mantorrix said:
Thanks for the answer. I've searched around and it seems that I can't get back to 8.5.6.21.
When I try to install it I get the android guy with exclamation point.
I guess I have to wait for ICS on 3G model
Click to expand...
Click to collapse
Easiest way is to root, install CWM recovery and flash an ICS ROM. Either the stock rooted ROM or one of the many custom ROMs
I was in a similar situation. The ASUS recovery did not work for me either and I couldn't figure out how to install CWM. There is not a lot of help for noobs with B80s and with all the methods out there it was a challenge to find the correct one. Here's what I did:
1. If you are not rooted, follow the instructions in http://forum.xda-developers.com/showthread.php?t=1427838 to get rooted. I had updated to the .21 firmware, and at that point, the nachoroot method is the only option. I had some trouble connecting ADB, but eventually I got it to work. This was the most difficult part of the process.
2. Install CWM. I was having trouble with this using the ASUS recovery, and I think it has to do with B80 models. I found the app in this thread http://forum.xda-developers.com/showthread.php?t=1346180 and it is amazing. If you are rooted, it installs CWM even on the B80 versions. The custom recovery will allow you to install any rom.
3. Download the option B ROM from http://forum.xda-developers.com/showthread.php?t=1514658. Place the zip on your SD card. This rom is the ASUS stock ICS firmware with root. Contrary to what some have said--I noticed a huge difference with ICS!
3. Backup all your user apps and data with Titanium Backup (optional). Do not back up system data, just user apps if you want to keep them.
4. Open your recovery. Shut the tablet off, and boot into recovery by holding down the power button and the volume down button until you are prompted to boot into recovery by pressing volume up. Pressing volume up should load CWM.
5. Wipe and then install! To wipe, select "wipe" on the recovery menu. Then wipe all data, cache, and dalvik-cache. To install, select install zip from SD card and find the zip file you downloaded in step 3.
Best of luck!
Hi,
may i hook in here, i've got a similar problem:
i TRY to get in adb mode, but it doesn't work as expected:
i used this thread initially (ASUS Transformer Root ToolKit V7.1 Universal (Windows) | 2011-09-22), i downloaded the toolkit, connected my turned off tab to the pc, booted via Power + vol up, it got connected to windows and i installed the drivers. so far so good. BUT: if i start adb server and use adb device, i dont get any devices listed... i cant do anything. And when i use this nvflash method with the download.bat file, i get an error and the usb connection vanishes... i dont have any further ideas what to do. but i can boot afterwards normaly to 3.2.1, though i dont get any updates
any hints? Thanks for reading anyways
thanks, DK
[edit] i have the version HTK75.DE_epad-8.6.5.21-20111216 installed [/edit]
DreadKing said:
Hi,
may i hook in here, i've got a similar problem:
i TRY to get in adb mode, but it doesn't work as expected:
i used this thread initially (ASUS Transformer Root ToolKit V7.1 Universal (Windows) | 2011-09-22), i downloaded the toolkit, connected my turned off tab to the pc, booted via Power + vol up, it got connected to windows and i installed the drivers. so far so good. BUT: if i start adb server and use adb device, i dont get any devices listed... i cant do anything. And when i use this nvflash method with the download.bat file, i get an error and the usb connection vanishes... i dont have any further ideas what to do. but i can boot afterwards normaly to 3.2.1, though i dont get any updates
any hints? Thanks for reading anyways
thanks, DK
[edit] i have the version HTK75.DE_epad-8.6.5.21-20111216 installed [/edit]
Click to expand...
Click to collapse
What you did was put your tablet into APX mode. That's only good if you're doing NVFLash not ADB.
To use ADB just have yourtablet on like normal with USB debugging turn on
Hi,
thanks for your fast reply, you are right. i got my adb device id when beeing in the os, so this works. but, trying to use nvflash/Brk's Asus TF RootKit over apx, i got the initial connection, but when i want to flash it looses the connection or dies or something... no idea what
you got any hints how i can come back to a clean version, which is upgradable?
thx & best regards,
dk
this is the program output btw:
Creating backup of current boot and recovery img
this should take some time... please wait
Loading Bootloader to pad... please wait!
Starting...
Error! Could not load bootloader.
Click to expand...
Click to collapse
alexlarson011 said:
I was in a similar situation. The ASUS recovery did not work for me either and I couldn't figure out how to install CWM. There is not a lot of help for noobs with B80s and with all the methods out there it was a challenge to find the correct one. Here's what I did:
1. If you are not rooted, follow the instructions in http://forum.xda-developers.com/showthread.php?t=1427838 to get rooted. I had updated to the .21 firmware, and at that point, the nachoroot method is the only option. I had some trouble connecting ADB, but eventually I got it to work. This was the most difficult part of the process.
2. Install CWM. I was having trouble with this using the ASUS recovery, and I think it has to do with B80 models. I found the app in this thread http://forum.xda-developers.com/showthread.php?t=1346180 and it is amazing. If you are rooted, it installs CWM even on the B80 versions. The custom recovery will allow you to install any rom.
3. Download the option B ROM from http://forum.xda-developers.com/showthread.php?t=1514658. Place the zip on your SD card. This rom is the ASUS stock ICS firmware with root. Contrary to what some have said--I noticed a huge difference with ICS!
3. Backup all your user apps and data with Titanium Backup (optional). Do not back up system data, just user apps if you want to keep them.
4. Open your recovery. Shut the tablet off, and boot into recovery by holding down the power button and the volume down button until you are prompted to boot into recovery by pressing volume up. Pressing volume up should load CWM.
5. Wipe and then install! To wipe, select "wipe" on the recovery menu. Then wipe all data, cache, and dalvik-cache. To install, select install zip from SD card and find the zip file you downloaded in step 3.
Best of luck!
Click to expand...
Click to collapse
Thanks! This worked for me. Thank you sir! Everything worked fine and I'm now on ICS!
followed exactly alexlarson011's instruction and voila - it works! thanks a lot!
best regards
-dk
Hi,
I am trying to flash my LG P500 to Cyanogen Mod 9 and the manual I found stated, that I should partition my SD card using Clockwork mod.
So I found ROM Recovery app in Google Play and installed it. Afterwords I downloaded Clockwork Flash using ROM Mangager app and everything seems OK.
But when I try to boot to clockwork mod, my phone is always being flashed into factory default.
I power off the phone, press vol down, home and power on buttons - the phone starts up, an animation of white box and android logo beside shows (with a progressbar at the bottom) - I think this is because of installed clockwork - then I release those 3 buttons I was holding, but the phone simply resets itself into factory default.
I also tried to hold those buttons all the way, until some "DOS-like" screen shows up, but the phone keeps rebooting itself.
The next thing I tried was to boot into recovery using ROM manager app, but it also did not work - I don't know, if it should boot into recovery by itself or I should press those 3buttons (vol down, home, power on/off)
Could you help me, what am I doing wrong?
thanks
It sounds like your phone is not rooted. Follow the sticky topics in this section for how to root your phone. Start with this one:
http://forum.xda-developers.com/showthread.php?t=2047589
Once you have root, install clockworkmod again. Then, you'll have success.
mrcorey said:
It sounds like your phone is not rooted. Follow the sticky topics in this section for how to root your phone. Start with this one:
http://forum.xda-developers.com/showthread.php?t=2047589
Once you have root, install clockworkmod again. Then, you'll have success.
Click to expand...
Click to collapse
no, my phone is already rooted
That's the stock recovery, that means ClockworkMod Recovery did not flash properly. See if you granted SuperUser rights to ROM manager, and check the SuperUser app if you had mistakenly checked 'Remember Choice'.
Sent from my LG-P500 using Tapatalk 2
Dont use Rom Manager.
You dont have recovery installed.
Find some other way to flash recovery.. there are many in this forum.
I suggest you use Rom Manager to download CWM and then boot into cwm .
I suggest http://forum.xda-developers.com/showthread.php?t=1827723
This is safe for installing custom recovery.
Thanks to Shinobisoft.
Use AmonRA recovery. Works flawlessly for all roms in this forum.
bleritaezo said:
I suggest you use Rom Manager to download CWM and then boot into cwm .
Click to expand...
Click to collapse
Your suggesting something that might make your phone unusable,This is not the way to get your 10 posts! Please do some research before suggesting something.
I have an at&t LG G2 D800 the android version is 4.2.2. my phone is ROOTED and I do have PHILZ Recovery. I was trying to do a hard reset or factory reset not sure what the difference is. what seemed to happen in the process is my phone was almost completely formatted and now i have access to only download mode and I can get into Philz Recover still. other then that when i boot my phone up it just gets stuck on LG boot up screen and my LED notification light blinks. need help please. cant seem to find solution or I just haven't looked in the right place yet. if anyone knows how to help or at least point me in the right direction. I give huge thanks in advance.
So you have a custom recovery installed. Good! Head over to your phones forum section and look for a stock ROM if you can find it.
If not then find an aftermarket one. Once you have found one. Download the needed files. Some included Google apps and some don't. It'll state it. Download the two zips or one if everything's together. Boot into recovery mode on your phone, and select storage and mounts.
From there go to the bottom or look for mount internal SD card or external SD card. Mount it. Then transfer the files you had downloaded to the root of your phone. Once done. Un mount it and remove the cable. Go to the menu of the recovery, select factory reset option. Then install the .zips.
Your phone should then boot up. Something must have gone wrong when you had done a hard reset.
Reply back when you've done the above. And tell me how it went.
Sent from my Nexus 5 using Tapatalk
Thank you for your help. my download speed is horrible so i'm in the process of downloading the two zip files for going back to stock. ill let you know when i get them downloaded and if it works.
Okay, good luck!
Sent from my Nexus 5 using Tapatalk
I have the same problem. I was running 4.2.2 rom under twrp recovery. Then I flasher Philz and flashed 4.4.2 rom. I was unsatisfied with it so I flashed back the old recovery so I could restore the backup. I booted twrp, recovered the backup and reeboted the system. After booting it was saying some crap like this and that procces stopped. Now Im flashing the .zip (just downloaded rom, no data), and after that its there just the boot loop (lg picture and blinking LED). Please help what to do :good:
you should flash via download mode with kdz file to go back to stock
I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.
InlineFourPower said:
I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.
Click to expand...
Click to collapse
Im also trying to get into download mode. But it wont let me Im following this thread.
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=download+mode
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
rspilot1 said:
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
Click to expand...
Click to collapse
Hi. What recovery are you using?
If you haven't installed a custom recovery, then that explains your issue. Basically, the app scheduled a custom recovery script which kept failing in the stock recovery. You should normally be able to reboot into the system holding the power button, thus skipping going to recovery. This also resets the recovery script so everything is back to normal.
Nandroid is normally only possible using a custom recovery like TWRP or CWM.
I saw that you might be able to perform a Nandroid without restarting the phone (so without a custom recovery) using this app: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en
I have never tried it. Looks promising though.
But please note that you won't be able to restore the backup without a custom recovery.
EDIT: If you do have a custom recovery, why not boot in recovery mode and make the backup from there?
Cheers
Recovery Boot Loop Problem
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
rspilot1 said:
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
Click to expand...
Click to collapse
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Click to expand...
Click to collapse
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
rspilot1 said:
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
Click to expand...
Click to collapse
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Click to expand...
Click to collapse
Thank you, that answered some questions.
you've been a great help.
Recovery Boot Loop Problem
rspilot1 said:
Thank you, that answered some questions.
you've been a great help.
Click to expand...
Click to collapse
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
rspilot1 said:
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
Click to expand...
Click to collapse
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Recovery Boot Loop Problem
andreiav said:
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Click to expand...
Click to collapse
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Recovery Boot Loop Problem
rspilot1 said:
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Click to expand...
Click to collapse
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
rspilot1 said:
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
Click to expand...
Click to collapse
Yep. 5 minutes process at most
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Yep. 5 minutes process at most
Sent from my GT-I9505
Click to expand...
Click to collapse
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
rspilot1 said:
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
Click to expand...
Click to collapse
Awesome! Really glad it worked.
Cheers!
Sent from my GT-I9505
Ok, this is a pretty specific question to my weird situation. I was trying to upgrade and it failed, so I had to flash back to the Stock ICS ROM from Asus.
Is there anyway to install TWRP, so that I can then install KatKiss 6.01...but without using the Volume down button (which is broken)?
I can:
- Boot into APX mode (via power volume-up)
- Use EasyFlasher 8.3 to try to install TWRP 2.2.1 (which I was going to upgrade later)
- But after the install of TWRP via EasyFlasher , you have to immediately reboot into recovery mode. and to do that you need power and Volume Down. If I just boot normally, then my understanding is TWRP gets overwritten.
FYI: I understand there is a command level "adb reboot recovery" option. But that doesn't work right after an installation of TWRP via EasyFlasher, as it is not APX connectable at that point.
Any help, thoughts, guidance?
Nevermind. I was finally...finally....able to get it going by pushing really hard on the down volume button. I thought it was completely broken for over a year..but I guess it works if I use my nail and push to the max.
- used "easyrecovery .42" to install TWRP (old)...then installed TWRP 2.8.1 new using the new zip from TWRP itself.
- then followed the instructions from KitKat 6.0 page on this site to upgrade.
Whew...thought it was a goner for awhile.