Hello xda Community, My Girlfreind has the Samsung Wave and a while back a file got deleted which should'nt have, after that it would boot up to a blue screen stating there was an error with a missing file and would not go any further, she then got one of her freinds to flash the phone to a new rom "BADA" think its the 1st version, but ever since shes had this rom she gets really bad signal, No internet, no Camera, no alarm clock e.t.c. Im just woundering is there anyway to get the phone back to the "Original" rom that it would have come out of the Factory on, ive tried doing a hard reset but does not get rid of the new rom. Or is there another ROM that you lot could suggest i flash it to? Go easy with the answers as im not clued up about Flashing mobiles or ROM's. Any Help or ideas would be grateful!
Cheers Todd!
Related
Hello xda Community, My Girlfreind has the Samsung Wave and a while back a file got deleted which should'nt have, after that it would boot up to a blue screen stating there was an error with a missing file and would not go any further, she then got one of her freinds to flash the phone to a new rom "BADA" think its the 1st version, but ever since shes had this rom she gets really bad signal, No internet, no Camera, no alarm clock e.t.c. Im just woundering is there anyway to get the phone back to the "Original" rom that it would have come out of the Factory on, ive tried doing a hard reset but does not get rid of the new rom. Or is there another ROM that you lot could suggest i flash it to? Go easy with the answers as im not clued up about Flashing mobiles or ROM's.
Cheers!
Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin
I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn
Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021
Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997
I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.
went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium
Hello,
Hope you guys can help me. I'm lost right now. (COMPLETE NOOB)
Yesterday I rooted my htc amaze 4g with Hasoon's tool and it worked. Then I installed the Speed 8.0 rom on my phone and everything worked except that it did not recognized my mobile data. I could not even see the 4g in the corner next to the signal symbol.
After that I thought my Wind phone might not be 100% compatible with that ROM (since the rom might be for tmobile phones or something) so I tried the FastAmaze rom but the same. Now I'm trying to go back to the Stock rom, but I cant.
I tried downloading the RUU but once I start the process, it can not be completed. I don't get an exact error it only tells me that the usb might not be connected to the phone or to check the battery. I tried the same thing many times.
I really need data on my phone (Plus I'm paying for it). Can someone help me to restore the STOCK rom or to get data in the Speed or Fast Amaze rom? To avoid future problems I would prefer to just stick to the Stock rom, but if is not possible then as long as I can get data on my phone I'm happy.
A 1000 thank you to all of you.
PLEASE HELP!!!! (Again, I'm desperate)
I need help. I know very little about the android stuff even though I have had the phone nearly 3 years I think. I got a problem of flashing(my first experience of flashing the firmware). Let me put it in details. I have xperia SL. My friend helped flash a new custom rom (MIUI) so my phone was rooted and unlocked bootloader. because there were always problems happening( not smooth, and apps always stopped working during they were in the process) while I was using the MIUI Rom. I decided to flash it by myself to firmware I had before, but I did a lot of reading about it before I did it, but I don't think i understand all. Before it was flashed, it had the stock: LT26ii_6.2.B.1.96. I tried to look for this one. But I could find only the firmware for Xperia S. I tried, but during flashing problems happened it said something like flashing aborted, I don't know why. when I turn my phone on it displayed only reparing picture on screen...then I tried to turn it off by holding volumn up key and power button for 10 seconds and tried to flash another frimware but It is the old version: LT26ii_6.1.A.2.55_1266-9957_Singapore by xdaNomNomM. It worked this time. I looked for the firmware of LT26ii_6.2.B.1.96 and I got one it is LT26ii_6.2.B.1.96_Generic. I decided to flash my phone again. Yes, flashing process till the end was fine. I didn't see any error message or something. But after flashing, I disconnect it and turned it on because I got the message to do so. It displayed the repairing image again, don't know what is wrong. I decided to flash it again using the old firmware again 4.0.4 it works and now I am stuck using the ICS, not really satified with it. Anyone can help provide the links to download the firmware LT26ii_6.2.B.1.96 that work for me? and can you tell what could be the problems while I was flashing? what should I do to my phone now, keep it like that?
Thank in advance! Sorry that I write a lot for you to read and sorry to disturb you all!
Rosely said:
I need help. I know very little about the android stuff even though I have had the phone nearly 3 years I think. I got a problem of flashing(my first experience of flashing the firmware). Let me put it in details. I have xperia SL. My friend helped flash a new custom rom (MIUI) so my phone was rooted and unlocked bootloader. because there were always problems happening( not smooth, and apps always stopped working during they were in the process) while I was using the MIUI Rom. I decided to flash it by myself to firmware I had before, but I did a lot of reading about it before I did it, but I don't think i understand all. Before it was flashed, it had the stock: LT26ii_6.2.B.1.96. I tried to look for this one. But I could find only the firmware for Xperia S. I tried, but during flashing problems happened it said something like flashing aborted, I don't know why. when I turn my phone on it displayed only reparing picture on screen...then I tried to turn it off by holding volumn up key and power button for 10 seconds and tried to flash another frimware but It is the old version: LT26ii_6.1.A.2.55_1266-9957_Singapore by xdaNomNomM. It worked this time. I looked for the firmware of LT26ii_6.2.B.1.96 and I got one it is LT26ii_6.2.B.1.96_Generic. I decided to flash my phone again. Yes, flashing process till the end was fine. I didn't see any error message or something. But after flashing, I disconnect it and turned it on because I got the message to do so. It displayed the repairing image again, don't know what is wrong. I decided to flash it again using the old firmware again 4.0.4 it works and now I am stuck using the ICS, not really satified with it. Anyone can help provide the links to download the firmware LT26ii_6.2.B.1.96 that work for me? and can you tell what could be the problems while I was flashing? what should I do to my phone now, keep it like that?
Thank in advance! Sorry that I write a lot for you to read and sorry to disturb you all!
Click to expand...
Click to collapse
Sorry dude but don't ask so long question.... No one has time to read it ....
Hello everyone,
I know this looks like a pretty noob question, but I better be sure. Recently I took my S8+ to get its screen repaired at a Samsung Repair Center. Today I got an email stating that since my S8+ had an unofficial OS installed the main board would have to be swapped for a new one. I know thats BS, since I could totally flash a Stock Rom if I had the phone myself, and since the girl receiving my phone mentioned that they had "machines" that could return your phone to stock in minutes, I guess the would be able too.
I'm going to deny the main board swap, and ask them to flash stock if necessary and proceed with the repair.
In case they were unable or rejected to I'd like to flash stock myself, getting my phone back, flashing it with my laptop, and turning it in again.
What I don't know is if,
Does having a custom Rom prevent they/me from flashing stock the normal way? I have TWRP and everything, IDK if they/I need to take other measures.
Will I be able to just flash stock with just ODIN? The screen was destroyed, so I might not even be able to see what I'm doing. I guess is just getting the phone to download mode and flashing, but you never know.
Thanks in advance