Database Info

How good is the Sleeve case included in Nexus one package?

Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks

I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.

legolas.w said:
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
Click to expand...
Click to collapse
I can say that it works very well as far as protecting your phone. I have a N1, but my cousin was trying to see if her Sprint Hero could fit in the sleeve and just when she put it in the sleeve, it fell on the floor. We slid it back out of the sleeve and apart from the battery door popping off, and we snapped it back on, all was well.

I have been using it and it seems to work well enough. It is slim and has the cute android on one side. I'm going to put the Zagg body protector when it comes out in conjunction with the sleeve.

Thank you all for the replay. I think I will stay with Clear-coat screen protector and the sleeve. but can anyone please post a photo of the sleeve ?
specially when the cell phone is inside the sleeve. I want to know whether the sleeve fully covers the phone or the phone is taller than the sleeve.
Thanks

It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink

It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6

SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Hey, that's a really nice case! Thanks for the pic!

I like the little Android on it. I wish Google would make an actual case to carry on your hip with that on it.

Bicster_ said:
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
Click to expand...
Click to collapse
The same thing happened to me. i dropped mine but it wasnt 4 feet and the phone came out alright. like you said it was scary.

The case is nice, it is slim and cushy. That said I don't think it will protect it from serious falls. If you are careful its nice, it slips in and out easily and doesn't add much width of it at all.
I will be looking into other things as well...that you don't need to remove in order to use the phone but we will see. I hate adding width to the phone at all

The sleeve is just OK for now, until better protective cases hit the market!

Thanks everyone for sharing the pictures and your thought.

SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Thank you for the photo,
is this taken with the Nexus one highest camera resolution?

NPS_CA said:
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
Click to expand...
Click to collapse
The video is amazing, thanks for sharing it.
I am waiting for my N1 . Hope it arrive soon :d

does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front

milkham said:
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
Click to expand...
Click to collapse
this is what i like most about it

I think the sleeve does it's job, however I cannot hear my phone calls very well when it's in the sleeve, and if your trying to answer a call when you do actually hear it you have to hustle to remove it from your pocket and try to get it out of the sleeve to answer the call. It's tricky. I cannot wait for the 2 docking stations that are coming out at the end of the month. One for the desktop and one for the car. Both will use the little gold contacts on the bottom of the phone. So you do not have to use a docking station with a damn micro usb sticking out of the docking station, you will be able to just set your phone onto these stations, and it will charge without connecting anything.

tommyarmour said:
I cannot wait for the 2 docking stations that are coming out at the end of the month.
Click to expand...
Click to collapse
Eh, who said anything about them coming out at the end of the month? They haven't been announced at all, much less given release dates. We only know about them because they passed through the FCC.

From my past experiences ...
... Just wanted to share this: I have had several similar sleeves that came with phones I have had in the past and here are common problems I have found with them:
(1) Most of them use glue in addition to stitching in their construction. After months of use (and possibly from body heat if commonly stored in pocket), the glue starts to marr the phone
(2) Most of them have nice soft OUTER finishes but not so on the inside. This is true for the N1 sleeve too. Feel the roughness of the edges and sides on the inside ... not sure anyone would really want their phone sliding up and down on that especially if the sleeve is snug.
(3) Most of them tend to double as screen cleaners if used a certain way (either on the inside or using the outside), but end up leaving surface scratches in the long run.
(4) Even the best of screen protectors tend to affect the screen resolution and/or viewing angle even if just slightly.
Granted that these experiences ranged over several manufacturers (Sony Ericcson P series, HTC, etc) and several skins/screen protectors, but I have now built up my knee-jerk reaction of a shudder everytime I think of a sleeve or a screen protector .... of course, thats just me
Just my two cents ....
On a side note, I am in search for a vertical flip style ("book style") for my N1.
I guess my logic is this: protect when not in use, but let me have the best resolution when IN use ... in case anyone knows of a good one, please let me know?
Thanks!

Nexus one Leather Pouch

Hi,
There has been a lack of leather pouches for the Nexus One.
I Just found some really good one from ebay: -
http://cgi.ebay.com/Leather-Pouch-P...Accessories?hash=item414ccc2c8b#ht_3035wt_985
I've ordered one
Thanks
JAW$

Any iPhone pouch will work also since this phone is thinner, I have these
http://www.noreve.com/brand/Apple/product/Housse_cuir_Apple_iPhone_3G_Tradition_
http://www.senacases.com/google/htc-google-nexus-one-cases/ultra-slim-pouch-sleeve/#

Why don't these cases cover the top of the phone! Is there like a reason for this?! I mean seriously, the phone can fall out, you can drop it on its top, what would make them leave the top part of the phone un-protected and cover the rest of it -_-'

Eclair~ said:
Why don't these cases cover the top of the phone! Is there like a reason for this?! I mean seriously, the phone can fall out, you can drop it on its top, what would make them leave the top part of the phone un-protected and cover the rest of it -_-'
Click to expand...
Click to collapse
I guess you can see the upper part of the phone so you can take it out with your fingers.
The pouch is only on the phone when you are not using it i.e. pocket, handbag & anyway when you are not using it what the % anyway the chance that its going fall on the upper visible side of the phone.

the only concern is that the pouch has a magnetics...which might mess up you compass.

firerock said:
the only concern is that the pouch has a magnetics...which might mess up you compass.
Click to expand...
Click to collapse
I don't think the magnet is strong enough to mess up the compass

Sorry too junior to post a link but what about the pull-tab leather holster from shop.brando.com ( use find product on the home page ).

magnets will screw with your compass. I had an N1 holster with magnetic
lid closure. I tested first. Started with the compass app on, with the phone
front of me like normal and held the holster at arms length, and slowly brought
it closer. At about 2 1/2 ft, the compass needle started deflecting, and got
much worse as I brought the holster closer. Got my money back.

I've also had two of my bank payments cards destroyed by magnets on the phone-holster....The magnet-stripe on the cards couldn't take it when I accidently put the phone and card in same pocket....
(of course the chip on the cards is more widely used now, instead of the stripe, but...)

dudeldei said:
I've also had two of my bank payments cards destroyed by magnets on the phone-holster....The magnet-stripe on the cards couldn't take it when I accidently put the phone and card in same pocket....
(of course the chip on the cards is more widely used now, instead of the stripe, but...)
Click to expand...
Click to collapse
The Pouch I recommended is awful & wouldn't recommend.

JAW$ said:
The Pouch I recommended is awful & wouldn't recommend.
Click to expand...
Click to collapse
What is wrong with it specifically? How is the quality and fit?
I'm looking for a nicer case than the stock one, mostly to protect it from my keys. I don't really mind if the compass doesn't work when I'm not using the phone.
If this isn't it, does anyone else have a recommendation for a quality N1 case under $40?

I want a real friggin' pouch with leather carved of Virginian grown cows with the Android logo iron-burned into the leather and smooth innside lining.. I would pay top $$$ for one.
None of that fake syntethic leather stuff.. i want to spoil my Nexus..
Somthing like this: http://www.senacases.com/google/htc-google-nexus-one-cases/

I ordered http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000884&products_id=28053
Looks classy and nice, even though it won't have a flip i hope it will fit it tight enough. Still, i want a cow pouch and would kill for one..

I have the sena flip case with the magnets. It does not affect the compass when the flip part of it is open or flipped backwards under the phone. If you go to flip it closed the needle will twirl as you pass the magnets over the top of the phone. That's the only time though. Nothing while it's in the case.
I hated the case at first. Couldn't grab the pull down bar at the top of the phone. After breaking it in for a week it was no problem.

Sindroid said:
I want a real friggin' pouch with leather carved of Virginian grown cows with the Android logo iron-burned into the leather and smooth innside lining.. I would pay top $$$ for one.
None of that fake syntethic leather stuff.. i want to spoil my Nexus..
Somthing like this: (Senacases link)
Click to expand...
Click to collapse
I've always liked Sena cases. VERY high quality stuff. I two in the past, one for my HTC 8125 and one for my Blackjack II. Never ended up getting one for my Tilt 2, though. I play on getting the Ultraslim soon for my Nexus One.

You can tell these manufacturers do not use a cell phone.
These cases NEVER have a hole for the speaker. With the nexus speaker being so low I can only imagine how those cases will muffle the sound.
I always end up cutting a hole myself, but WHY don't they do that themselves? Would be very easy for them, than we can hear ringtones and music with no problem!

isjr said:
Any iPhone pouch will work also since this phone is thinner, I have these
http://www.noreve.com/brand/Apple/product/Housse_cuir_Apple_iPhone_3G_Tradition_
Click to expand...
Click to collapse
That **** is f*'in beautiful. Thanks for pointing it out!
They also have a Nexus pouch.

djmcnz said:
That **** is f*'in beautiful. Thanks for pointing it out!
They also have a Nexus pouch.
Click to expand...
Click to collapse
Yeah it is sweet but I gave it away because I use the chrome snap-on case from Case-mate and it would fit anymore now I have to use the pouch that came with the phone which I love anyways. When it comes to the Snap-ons I've bought almost all of them even the new one from Incipio and they are all pure crap except the one from Case-mate I give it a 9/10. Also I submitted a review for that case 5 stars but for some reason they didn't accept it.
http://www.case-mate.com/Google-Cases/Case-Mate-Google-Nexus-One-Barely-There-Cases.asp

There is the original HTC pouch for the Desire. This should work great with the Nexus.
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199436

DIY: Modded Proporta Case

Hi,
In the quest to have a decent protective case, I went to the extent of modding a well-known one. The Proporta.
As many have seen, Proporta holds the Desire only in two points and leaves the rest of the phone unprotected.
What I've done was to remove those clamps and glue a gel case. The result can be seen in the attachment.

To me the original clips are holding the phone very well, there is one also on the bottom as well avoiding it to slide off. Im very happy as it is!

How the devil did you glue the rubber case to the leather?, I've tried to glue silicone before and had absolutely no luck at all, nothing sticks to it.

I used the same glue that's used in shoes. I don't know it's type in english! It's something in the line of Pattex Contact, I believe.

jannen said:
To me the original clips are holding the phone very well, there is one also on the bottom as well avoiding it to slide off. Im very happy as it is!
Click to expand...
Click to collapse
My Proporta case has no clip on the bottom?
I like the case, though the clamps/clips on side are a little looser than what they were when I first got it. As such the Desire seems to slide upwards or downwards when the case is opened (i.e. when in call) which is annoying and just about bearable. A stability clip, somehow implemented, would definately be a plus to an otherwise great case IMHO.

DoomFragger said:
I used the same glue that's used in shoes. I don't know it's type in english! It's something in the line of Pattex Contact, I believe.
Click to expand...
Click to collapse
nice solution, now you've got my brain cogs whirling I think I've got some Shoo Goo that I used to use on my trainers back in my longboarding days.
I've got myself a Tuff-Luv case, which is basically the same case as the proporta minus the aluminium plate. Do you think in your opinion theres enough room to cut a hole in the back of the leather case to be able to use the camera?, perhaps seal the cut with something?
I keep flip-flopping between it being to close to the edge of the 'flap' and that it should work.

I've attached a picture on how it looks in mine.
I believe that it should work but it would definitely need some way seal the cut.
Unfortunately I can't give you any suggestion on the how! My expertise in leather is almost non.

Silicone case for flat back

Hi I am currently awaiting delivery for my DHD (and it could be a week or two).
I am wondering if anyone who owns a Silicone case - or something similar, and has found a case that allows for the phone to sit flat on a table surface to allow for one handed use. With the camera design set out from the main body I am hoping the case would come up to this level preventing rocking action.
Does the phone rock around on a table when used without a case or is it bearable?
I will then add a screen protector perhaps a Zagg product or similar.
Any ideas?
Cheers
Si

mine is currently cases-less, and does rock around when it on the table. however, placing a little phone sock under the phone is good at reducing the rocking, but i cant find one big enough to fit the phone in yet.
still looking for a good case, but it seems 3rd parties are being slow with this phone.

I'm needing a case or something like a bumper for my DHD.
I've had it 3 weeks and dropped it twice on to hard surfaces, got 2 small scratches and a small dent at the power button (since the button was flush with the case to start with, its actually made it a bit better!! LOL)
but my luck won't last too much longer so I need to protect it...
any ideas??
Sent from my Desire HD using XDA App

I was thinking of using a phone sock to help keep it protected, the problem is having to slide the phone out every time i want to use it, id end up just leaving it somewhere. But keeping it steady with one is a good idea - but overall I'm looking for something more protective, good looking and will prevent the rocking.
I'm normally quite good with not dropping my phones, but a bumper or silicone case would be a must with a screen this size...don't really want to scratch or dent it (even if it has its upsides ;D ).
I'll keep looking, the annoying thing is that all the silicone ones I have found only have front or back on photos, not from the side...which is obviously important to check the level in relation to the camera area.
Cheers
Si

Was browsing through Google products and found this new one on Play, looks really cool not as dull and uninspired as the average silicone protector. I don't know again if it will help the issue with the raised camera, but I am still really interested.
play.com/Mobiles/Mobile/4-/17123125/Exspect-HTC-Desire-HD-Tough-Silicone-Case-Black/Product.html?_$ja=tsid:11518|cc:|prd:17123125|cat:Mobile+#

I bought one of these and it does what it says on the tim. Protects the back and sides while offering unfettered access to the screen. It helps with the grip too, so I'm less likely to drop it (eek!)

Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD

http://forum.xda-developers.com/showthread.php?t=824377
here what i found while looking for the case and ended up with a very good one

Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617

mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
Yeah it looks good, nice to know its tougher than silicone, but unless it solves the rocking issue - I still prefer the one I found on Play...just because its cool looking.
but if you give it a go, let us know how well it performs and fits.

Well tbh I'm leaning toward the black one too but this TPU thing caught my attention and I was wondering if anyone has it

mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
notice they have a cut out for the power button which was a issue on my first gel case

mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
I don't think anyone should have it yet since HTC haven't released it.
I ordered it from handtec before but they say they will get it at the end of the month so I canceled mine.

combat goofwing said:
notice they have a cut out for the power button which was a issue on my first gel case
Click to expand...
Click to collapse
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.

emwdava said:
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
Click to expand...
Click to collapse
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out

combat goofwing said:
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
Click to expand...
Click to collapse
To be honest, I don't think the picture shown is even the actual product. There is no hole for the speaker and the whole is definitely for the 3.5mm jack. (you can see the power button raised on the upper right corner). Since the case is not released yet, this is quite possible.

I've got this one too...
As CD993 says it does wobble, but only marginally... this is a TOUCH screen after all, you don't need to press very hard for it to respond!
The fact it's nearly £10 cheaper than the official HTC one (and yes, the image is wrong or else it's not going to have enough cutouts on the back!) is good enough for me!
cd993 said:
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150506304658"]BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
Click to expand...
Click to collapse
WTF is the matter with posting links btw? At what point does this 'privilege' begin?

Is there a case that has the ability to attach a lanyard?

My mom and dad are coming from old flip phones where they had lanyards to prevent/minimize drops. I'm a little more concerned now that they have something more expensive and prone to damage if dropped. I originally wanted to get them the Diztronic TPU cases, but if there's something out there with a lanyard attachement hole that would be best.

tracerit said:
My mom and dad are coming from old flip phones where they had lanyards to prevent/minimize drops. I'm a little more concerned now that they have something more expensive and prone to damage if dropped. I originally wanted to get them the Diztronic TPU cases, but if there's something out there with a lanyard attachement hole that would be best.
Click to expand...
Click to collapse
yeah i think u can put one on my case i bought at amazon here. http://www.amazon.com/gp/product/B007RJHUMI/ref=oh_details_o01_s00_i00. i will take a pic real quick.
they have different colors also if u dont like the smoked one that i got. here is the link to the other colors http://www.amazon.com/s/ref=nb_sb_n...lite+Androidified+A2+TPU+Case+-+For+HTC+One+S

s10shane said:
yeah i think u can put one on my case i bought at amazon here. http://www.amazon.com/gp/product/B007RJHUMI/ref=oh_details_o01_s00_i00. i will take a pic real quick.
they have different colors also if u dont like the smoked one that i got. here is the link to the other colors http://www.amazon.com/s/ref=nb_sb_n...lite+Androidified+A2+TPU+Case+-+For+HTC+One+S
Click to expand...
Click to collapse
I can confirm that this case has one too, and I love the case also

nice! i just wish they made one without the big android logo. i'll show it to my parents to see if they mind it or not.
i may just cut a small hole above the rear speaker grille and loop it through those two holes as well.

This was mentioned in another thread as well, but I'm not enitrely sure that I'd trust a lanyard on a silicone type case. What exactly is preventing it, when falling with a force, from holding onto the case and NOT the device? While the cases are clearly fit to our devices, they aren't exactly strongly hanging on either.
Unless you're using a lanyard on an Otterbox type of case, I wouldn't really trust it to hold more than just the case in a fall.

Dude, Im gonna go out on a limb and say, I think the lanyards are even better protection than a case...maybe not protection, but prevention. (That sounds weird..btw)
I used to put the lanyards on all my phones and, aside from kind of looking like an ass, I cant tell u how many times I prevented a drop, especially when pulling out of my pocket. It's just something to grab on to.. so.. +1
Sent from my HTC One S using Tapatalk 2

decalex said:
Dude, Im gonna go out on a limb and say, I think the lanyards are even better protection than a case...maybe not protection, but prevention. (That sounds weird..btw)
I used to put the lanyards on all my phones and, aside from kind of looking like an ass, I cant tell u how many times I prevented a drop, especially when pulling out of my pocket. It's just something to grab on to.. so.. +1
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
I used to as well, but it was actually on the phone, not the case (though it regularly went through a hole in the case as well, but the lanyard hole was built into phones before!)
I dont trust a lanyard attached to a rubber case

I have a CaseMate Barely There, very sleek,.. and strong, .. and has 2 holes for lanyard attach:
http://www.case-mate.com/HTC-One-S-Cases/Case-Mate-HTC-One-S-Barely-There-Cases.asp
it's visible on the photos

This one 2 little holes for the lanyard too.
http://forum.xda-developers.com/showthread.php?p=26736915#post26736915

Damn !! thats a nice looking case
Such a shame that a well made case adds so much bulk
If only the One S had some rubber grips down the side, I wouldnt need a case then

tracerit said:
nice! i just wish they made one without the big android logo. i'll show it to my parents to see if they mind it or not.
i may just cut a small hole above the rear speaker grille and loop it through those two holes as well.
Click to expand...
Click to collapse
Look here: http://www.amazon.com/gp/product/B007WHQBIY