Related
I make this tool for quickly rotion display in Tornado, it's a part of my cooked ROM.
- Press comm button for rotation and restore. Can set default rotation in settings
- Setting tool is smaller and quickly
Thank all in this thread:
http://forum.xda-developers.com/showthread.php?t=318178
Thank to kartam
Please install sdkcerts.cab or WMtequan.cab first.
nncuong said:
I make this tool for quickly rotion display in Tornado, it's a part of my cooked ROM.
- Press comm button for rotation and restore. Can set default rotation in settings
- Setting tool is smaller and quickly
Thank all in this thread:
http://forum.xda-developers.com/showthread.php?t=318178
Thank to kartam
Please install sdkcerts.cab or WMtequan.cab first.
Click to expand...
Click to collapse
Why dont you post your cooked ROM here too. Is it English or Vietnamese?
Thanks
p/s
I installed the sdkcerts followed with this cab. I get the response "Sorry, your current display driver doesnt support this display mode!"
What's wrong?
thanks
Change driver from ddi.dll to ddivox.dll, It'll support rotation.
My cooked ROM have Vietnamese font only. It has based on shark's rom and has Landscape background (which is removed in orther rom)
nncuong said:
Change driver from ddi.dll to ddivox.dll, It'll support rotation.
My cooked ROM have Vietnamese font only. It has based on shark's rom and has Landscape background (which is removed in orther rom)
Click to expand...
Click to collapse
Yes! I changed it to the ddivox.dll. It responded with a soft reset. Now my phone is dead at the splash screen. I am now re-flashing the ROM. ahhhhhh.....
BTW does your pBAR support Tornado?
Thanks
Hello, i have same problem and i resolve to change the driver to ddivox.dll but in this program the action change joystick in Landscape is grey and in Landscpae mode the joystick no change direction.
What's rong ?
thanks
ps : sorry for my english
LOL, we should have fixed the joystick orientation and screen refresh issue before releasing a new tool. Anyway, good job there.
I wish to remind all of u, if u use vox dll, the screen will not refresh itself, unless u press a button. As in, if your phone goes idle at 5pm, it will show 5pm even at 12am, till u press a button to refresh the screen
karhoe said:
LOL, we should have fixed the joystick orientation and screen refresh issue before releasing a new tool. Anyway, good job there.
I wish to remind all of u, if u use vox dll, the screen will not refresh itself, unless u press a button. As in, if your phone goes idle at 5pm, it will show 5pm even at 12am, till u press a button to refresh the screen
Click to expand...
Click to collapse
Thanks Buddy. I had to reinstall the ROM.
illi said:
Thanks Buddy. I had to reinstall the ROM.
Click to expand...
Click to collapse
Hey illi... Thanks for being the guinea pig on this one! Saved me from crashing my phone! I love testers!
bipinsen said:
Hey illi... Thanks for being the guinea pig on this one! Saved me from crashing my phone! I love testers!
Click to expand...
Click to collapse
You're welcome. Glad you appreciate my guinea pigging that #*$ software. Consoled me though.
Still not finished tweaking my registry and its passed 2 am here.
illi said:
You're welcome. Glad you appreciate my guinea pigging that #*$ software. Consoled me though.
Still not finished tweaking my registry and its passed 2 am here.
Click to expand...
Click to collapse
That's exactly my gripe with trying out new ROMs too. Getting the registry back to it's optimal condition takes longer than anything else in the process. I've gone to using Sprite to do a backup when trying out new software. Problem? Hard reset => run backup => back as new!
bipinsen said:
That's exactly my gripe with trying out new ROMs too. Getting the registry back to it's optimal condition takes longer than anything else in the process. I've gone to using Sprite to do a backup when trying out new software. Problem? Hard reset => run backup => back as new!
Click to expand...
Click to collapse
Yep, I second that - I have tried varius backup programs before, but they were very limited in case of restoring system databases, or locked files. I have bought Sprite Backup, and I can backup - change ROM - restore - continue working in 15 minutes, leaving everything in!
XXX
Never use this software...!!!!!
it makes my 577w crashed
i can't start enter the windows now
Obviously you did not install the sdk or wntenquan as instructed. . .
Its your own fault
yep, smth wrong with your hands.dll or maybe even brain.dll... update them
followed all directions and it work like a charm for me ^^ very impressive app mate good job A+++
Guys please post step by step guide for the installation process. Many people wanna try it but the fear of crash is high enough to wait more
heres a little guide for ya guys:
step 1:download this and this
step 2;instal them on your phone or card wich ever you like
step 3:download the rotation display tool on the first post
step 4: install it
step 5: after installing both certificates and the rotation tool execute the "display manager" app on your phone then go to menu/change driver and select the "vox display driver(experimental)" after that the phone will reboot and then after the reboot, execute the "display manager" app again and select the orientation of your choice and thats it it should work 100% i did this on my tornado and it work first try.
hope it helps guys
rafyvitto said:
heres a little guide for ya guys:
step 1:download this and this
step 2;instal them on your phone or card wich ever you like
step 3:download the rotation display tool on the first post
step 4: install it
step 5: after installing both certificates and the rotation tool execute the "display manager" app on your phone then go to menu/change driver and select the "vox display driver(experimental)" after that the phone will reboot and then after the reboot, execute the "display manager" app again and select the orientation of your choice and thats it it should work 100% i did this on my tornado and it work first try.
hope it helps guys
Click to expand...
Click to collapse
Thank you will try
Could someone please add WMtequan.cab into my TDM or nncuong's pRot so that no more people would need to HR if they forgot. I must say that I myself had to hard reset lately because I forgot to install the WMtequan.
Sadly, it doesnt fix the screen refresh issue, so its annoying especially when I want to know he call duration or the time
Hi guys,
I own a POLA100 Cruise.
I:
- Downloaded polymod 2.1g UPDATE + DARK THEME 04 Mar
- Downloaded Haret Install
- Renamed default.txt to original-default.txt
- Renamed defalult-polaris.txt to default.txt
- Partitioned a 2 Gb SD as: 900 Primary Fat32 + 1024 Extended (2 x 512 Ext2 Partition).
- Copied on Fat32 partition the folder "andboot" Haretinstall+Pack.tgz
... I launch Haret....
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
What I can do to launch a good android image on my Pola100 ?
Anyone can create a "Pack" with Haretinstall, the right default.txt and the polymod 2.1g UPDATE + DARK THEME 04 Mar of this thread http://forum.xda-developers.com/showthread.php?t=600154 ?
Thanks a lot.
I know that I'm not helping, but... I have the same problem here.
foxct2005 said:
Hi guys,
I own a POLA100 Cruise.
I:
- Downloaded polymod 2.1g UPDATE + DARK THEME 04 Mar
- Downloaded Haret Install
- Renamed default.txt to original-default.txt
- Renamed defalult-polaris.txt to default.txt
- Partitioned a 2 Gb SD as: 900 Primary Fat32 + 1024 Extended (2 x 512 Ext2 Partition).
- Copied on Fat32 partition the folder "andboot" Haretinstall+Pack.tgz
... I launch Haret....
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
What I can do to launch a good android image on my Pola100 ?
Anyone can create a "Pack" with Haretinstall, the right default.txt and the polymod 2.1g UPDATE + DARK THEME 04 Mar of this thread http://forum.xda-developers.com/showthread.php?t=600154 ?
Thanks a lot.
Click to expand...
Click to collapse
edit the default.txt to:
set RAMSIZE 0x08000000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.gz
set cmdline "board-htcvogue.panel_type=1 ppp.nostart=0 pm.sleep_mode=1 mddi.width=240 mddi.height=320 lcd.density=120 no_console_suspend board-htcpolaris-battery.battery_capacity=1350 mddi_client_vogue.vsync=0"
boot
if this also not boot change: board-htcvogue.panel_type=1 to 3
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
foxct2005 said:
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
Click to expand...
Click to collapse
I have the same problem sometimes.
There are 3 situations I met.
(1) Wierd color screen with no response.
(2) An error message shows after "Press the DPad".
(3) A Successful boot.
Either (1) and (2) will happen if the boot text doesn't show immediately after the vibration of Haret Run. If the boot text shows immediately (maybe within 5 seconds) after the vibration, there will be a successful boot. Though I don't know which time it will success, I always press the DPad just after the vibration. If it fails, I will do soft reset and try again (or give up).
I change only zImage to zImage-eclair in the default-polaris.txt when using polymod 2.1g. For Myn's Warm Donut, I change nothing.
So, you may do more tries.
p.s.
I use fat32/Ext2/Ext2.
Although the speed of polymod improved, still much slower than the Myn's. But the Myn's seems to have more little problems on Polaris.
Sorry for my English.
Good luck.
solvga said:
(1) Wierd color screen with no response.
(2) An error message shows after "Press the DPad".
(3) A Successful boot.
Click to expand...
Click to collapse
Exactly the same for me. Most of the times its the first scenario for me.
Even after a successfull installation i have problems after a softreset.
I launched Haret and hold D-Pad immediately after Vibrate on RUN... and during all boot sequence... but i have this error
msm_i2c.0: error waiting for notbusy
Some suggest?
Bye.
foxct2005 said:
msm_i2c.0: error waiting for notbusy
Click to expand...
Click to collapse
That is what I mean by (2) An error message shows after "Press the DPad".
Just try Haret again.
code PIN problem
Hi,
I have another problem with installing Android via SD.
Everything works but at the time of typing PIN code, I enter my PIN code but Android tells me it's an "incorrect pin".
Do you have the same problem?
thanks
I made other 5 tries... 2 with polymod and 3 with wormdonut...
In these tries... both with polymod and wormdonut i had this:
- Running Haret
- After Vibrate... Hold D-Pad
- Even D-Pad hold.... i had a messange "error waiting for not busy"
- I released D-Pad and Hold Again
- After some times of error "error waiting for not busy".... INSTALLED STARTS!!!!
- I had on Screen the message "Warning - Installing android can wipe your device <OK> "
- I pushed D Pad to Give "OK", but nothing happened on my cruise....
- Then.... "Error waiting for busing... in loop"... and I can't install anything.
My question Is.... after install Starts and warning message appairs.... what i can do to launch install ?
Which ways to select ? D-Pad ?
If i could press <OK>... which install method i have to select to install ?
Regards.
FoxCT.
damdirt21 said:
Hi,
I have another problem with installing Android via SD.
Everything works but at the time of typing PIN code, I enter my PIN code but Android tells me it's an "incorrect pin".
Do you have the same problem?
thanks
Click to expand...
Click to collapse
disable pin win wm
Which default.txt have you used? I tried it with adapted ones several times and always got this "..waiting for no busy..." error. Stepping back to original default-polaris.txt everything worked fine even after reset.
=)
thank you very much, It works now =)
to GOY2K - installation problems
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
dear GOY2k
i am having the problem at the first step. i downloaded the 240x320 file, then installed it in SD card (i have a micro SD card) in folder andboot. then i ran Haret and pressed the Dpad button and have kept it pressed. For the next 20 minutes i have just stayed in that position, with nothing happening at all.
kindly tell me where i am going wrong.
regards
o2-lover
to Goy2k - new problems
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
DEAR Goy2k
i finally got around to get installation process started - i changed default.txt to default-polaris.txt and it got started.
it asked me options and i chose INSTALL SYSTEM.
after installation started, i followed it as much as i could and i found that in many places, it kept mentioning cannot find or cannot install.
in the end, it fails to install android and the first menu comes back giving options. i finally quit after 3 tries.
what mistake am i making.
regards
o2-lover
to Goy2k - one step ahead - new problem
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
Dear Goy2k
i finally got to the following stage now, after various steps-failure messages during installation:
my set rebooted and ANDROID is written in a black screen. a cursor runs below it from left to right. sometimes it stop at the right, then after a while screen goes blank and then ANDROID reappears and the curson starts again.
currently this is going for about 10 minutes or 15 minutes already.
is this going in the right direction? anything else supposed to happen? or should i wait till the battery dies??
i hope you get this now and can reply now.
regards
o2-lover
to Goy2k - final step apparently
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
Dear Goy2k
i am sure you must be laughing by now at my follies.
i have been hoping for a long time to install ANDROID on my O2 XDA ORBIT II.
now, the ANDROID screen has progressed to a new bottleneck. A BLACK SCREEN showing the words 'COULD NOT SET PROPERTY'. this has come twice.
and now for the past 10 minutes or so, i am stuck at this screen.
how long is this supposed to take ??
regards
o2-lover
Hi O2-lover,
sorry for that late answer, but I'ven't got the time to look for this thread. I'm using a Orbit 2 too. All I've done was to use default-polaris.txt. I only got in trouble when I tried to install it on SD-Card (I think this is one option). Later I created 2 ext2 (each 256mb) patitions and one swap partition. On installation I choose to install it on ext2 (both, system and data).
From now, I think my data partition is not used, but I'll sneak around at weekend, maybe to install it on NAND.
to Goy2k - i got it working finally
goy2k said:
Hi O2-lover,
sorry for that late answer, but I'ven't got the time to look for this thread. I'm using a Orbit 2 too. All I've done was to use default-polaris.txt. I only got in trouble when I tried to install it on SD-Card (I think this is one option). Later I created 2 ext2 (each 256mb) patitions and one swap partition. On installation I choose to install it on ext2 (both, system and data).
From now, I think my data partition is not used, but I'll sneak around at weekend, maybe to install it on NAND.
Click to expand...
Click to collapse
dear Goy2k
thank you for the reply. after a number of tries, i finally got android installed. but it does have a big disadvantage. sometime or the other you are bound to have to switch your phone off for some reason. or you may forget to recharge the battery on time. well, when you switch it on, it goes back to windows.
SO UNLESS YOU ARE ABLE TO FLASH ANDROID ROM, it is not going to be a long time fun.
i am now going to try and get win 6.5. i have already upgraded to 6.1 from 6.0
best regards
o2-lover
I can take no credit for the work, only for the instructions on how to install and set to English language and the guts to try installing relying only on translation sites from the original Chinese. The credit for the work goes to the people at zn520 (www (dot) zn520 (dot) com).
NOTE: This ROM is intended for Chinese users but includes English. When you complete the update, you will need to make changes (which I documented) to configure it for English. No other languages are part of the build.
**** I take no responsibility if you brick your device *****
What is in the ROM?
Windows Mobile 6.1 Standard
CE OS 5.2.20758 (Build 20758.1.4.1) Build 2010.01.18,py8
Available Memory: 23.67MB
This is a very clean ROM with only a few of the original Samsung applications configured.
What works?
As far as I have found, everything works, here is what I have tested and found working.
Camera - Works well
Data Connectivity - Works well
Phone - Works well, very clear in calls
SMS - Works well
MMS - Appears to be installed but *** I have not tested ***
Summary
This ROM breathes new life into the device and makes it very useable. I have found no problems (other than the occaisional Chinese text). It has been very stable. Many of us have probably moved on to new device, but if you have an i320n sitting around, I would recommend you consider the upgrade. I am sure others will post their experience.
Accessing the ROM:
I don't have an account with any file sharing service and I now live in Zambia with slow Internet access. If someone is willing to upload it, please do and share the link with me for inclusion here.
http://turboshare.com/files/106951/ZN520__i320_WM6.1.zip.html
MD5: 9289b5f8ea0aa410ce40a0508783f8a8
**** Installation instructions included in next post.
Flashing Instructions
This has only been tested on Windows XP, it may work on others, but I have not tested.
1. Unzip file ZN520_[i320]WM6.1.zip
2. Run Setup.exe from ‘Driver’ folder to install drivers needed to recognize the device in bootloader mode. (You may be prompted that the drivers are not digitally signed, accept them.) Upon setup completion, you should get a message "SAMSUNG MIT Handset Software was installed successfully"
3. Restart the computer
4. Execute ClickFlash V0.3.exe (It will read the click_all.lst file for the location and name of the image)
5. With the phone off, connect the phone to the computer via USB cable
6. Hold down the 'Back' button (under the right soft key) and power on the phone with the 'Back' button still held in.
7. Phone should show "MITS - Mobile Internet Terminal" and go no further. If it boots fully, turn it off and repeat.
8. Check the status of ClickFlash, it should show "Device Connected!" and the Blackjack.BIN file should be selected (or click_all.lst which points it to the BIN file).
At this point the device is ready to be flashed...
9. Click on the icon that shows the red arrow pointing toward the device to begin flash.
You will see the progress bar as the file is downloaded to the device. Don't disconnect the device until you see the message "Download Successfully! Bye!" (It may take a while (8 to 10 minutes) with no indication anything is happening… be patient.
10. At this point the device will restart and will format itself then boot. Booting may take a while. Upon completion of boot, don't touch the device as it will automatically install additional software and restart itself.
11. It should now boot to a blue home screen. Congratulations, you have successfully flashed the device.
For instructions for changing it to English, see next post.
Configuring for English
At this point, you have a fully functioning device but in Chinese. If you want to fumble through trying to change it to English, have fun. If you want step by step instructions with screen shots to guide you, download the attachment.
FAQ
FAQ
Why do I still see some evidence of Chinese?
Not all applications installed in the ROM were Chinese/English capable (CeleTask for example). I wrote a short MortScript to automatically remove these applications or change links to English functions. Download 'Remove traces of Chinese.zip' (below) and follow instructions contained within.
Reserved for known issues (hoping someone can solve)
Text Input Method - The text input is set to Chinese with an option to use English, so it is workable. However the input UI is in Chinese and it isn't obvious to the use what options to choose. Is it possible to replace the default text input without having access to the actual ROM? If so, can someone point me to a resource?
Success? Any issues?
I have noticed that several people have downloaded and wanted to get feedback on the process and documentation.
Were there any issues in flashing the device?
Any errors or omissions in the documentation?
Thanks in advance for your feedback.
Jonathan
downloaded over 10 times. Error... I would like to test this on my phone. Would it be any chance to get zip to somewhere a download.
Vannepetri
Upload
As I mentioned in the original post, I now live in Zambia which was recently ranked as the worst Internet access in the world. I can upload again, but I would really appreciate some guidance as to where I can upload it that it won't limit the number of downloads.
Thanks,
Jonathan
Would some nonsense account to gmail and google docs share be a solution? Torrent might also be possible? Someone who has already downloaded a file could share it.
The best free service for what I found ... But I have not used ever.
fileupper dot com
Vannepetri
Uploaded to another service
FYI - I uploaded the file last night to a new service that doesn't appear to have any limits (other than erasing the file 90 days after the last access). I have updated the first post with the location. Please download and provide some feedback. Obviously 10 people have downloaded but no one has posted on their experience with it.
Jonathan
Very good job! Your instruction are OK.
My i320 is now with wm 6.1.
About the problem of IME and T9, I made a change in this registry key
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\et9ime.dll"
Because in original it was
"Ime File"="\Program Files\PlumSIP61\phoneime.dll"
and now when I press * the menu is in English!!!!
Bye
PS In the week-end I try to introduce the italian T9 dictionary.
Thanks =)
My i320n run correctly, just a hardware problem with the safe battery, it's down, the i320 don't keep the hour
This rom is fantastic! But...how to traslate this rom in italian?
Hi jmo, the link for the rom seems to be broken. Any chance of re-uploading it somewhere? Thanks!
hello,please add anoher link, the files link is broken.
please
link eror...pleassss another link...tanks
Topic abandoned ? Please link rom expired.
masbeno said:
link eror...pleassss another link...tanks
Click to expand...
Click to collapse
try download it from http://www.gsmforum.ru/threads/76046-I320-(I320XX_кит_WM6.1)?langid=1
What the button back left or right. Please turn bootloader mode ?
brunowm said:
What the button back left or right. Please turn bootloader mode ?
Click to expand...
Click to collapse
see the guide which has been given as below
Originally Posted by jmo
- Hold down the 'Back' button (under the right soft key) and power on the phone with the 'Back' button still held in
- Phone should show "MITS - Mobile Internet Terminal" and go no further. If it boots fully, turn it off and repeat.
Click to expand...
Click to collapse
TO ALL PEOPLE:
PLEASE STOP POSTING IN THIS TOPIC ABOUT "THIS PART DOESN'T WORK ECC ECC" WRITE IN THE TOPIC OF THE RELEASE (KERNEL OR SYSTEM), PLEASE LOOK IN THIS THREAD FOR WORKING SETUPS AND TRICKS, AND SEARCH ON THE FORUM BEFORE POSTING!
I start with thread with a information for all users:
Haret system sucks so if you want a full working android system left windows behind you and move to the new android world flash on nand.
With this how-to you will not erase any part of your system but you do at your own risk.
Main problem: screen
For polaris there are 3 type of screen. Usually pola100 (the old one) use panel 1, and pola 200 (09 edition) has panel 3 but ... not always works...
The best mode to test is try to install and after double reboot you have black screen change panel type.
What you need:
phone
sd card (1 Gb or more) 500 mb free
time
Update guide: http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsHaret
reserved by me
Do we have to delete/remove the install-seq.sh after installation?
Are both files (system & data) cleared with the installation script?
Thanks for the help.
install-seq.sh disable automatically after correct install.
This how-to is fir first install on disk on images so it format both data an system.
If you want to make only un update use bsg select partion and select update.
partition
I believe you should make this sticky
Don't post without reading!!!!
This method doesn't use sd partition, it create two imagedisk on sd!
working android
l1q1d said:
Don't post without reading!!!!
This method doesn't use sd partition, it create two imagedisk on sd!
Click to expand...
Click to collapse
hi there,
i made all you told here, booting..after more minutes...the logo appears...but when i press the android logo from the screen.. the touch screen dosent work..i can not start..only with buttons..and after pressing buttons..get over wizard..the phone need SIM PIN..but i can not typed.
please help
i changed BORAD PANEL in 1,2,3 and in 2,3 is black screen.
please help me
You have to disable pin code before installing.
For the screen problem look in kernel thread...
waiting for not busy
What about "waiting for not busy" - im2c error ?
The only Zimage working for my pola100 it's an old 29-04-10 Version !
I am very disperate!
Bye !
touch screen dosent work
foxct2005 said:
What about "waiting for not busy" - im2c error ?
The only Zimage working for my pola100 it's an old 29-04-10 Version !
I am very disperate!
Bye !
Click to expand...
Click to collapse
Dear All,
i tried and deactivate the PIN of sim card..read all posts from previous thread that you gave me..but nothing..
all ok..
bootin..starting..apears the logo and final...
before i need to press the screen, appears a message ''Android system stop responding..and a button FINISH"...after pressing finish, i need to press the middle of the screen on the android logo and nothing, only 2 buttons Emergency Call and Choose Language. to can press these 2 buttons, i use the buttons and i can press them..but touch screen do not working.
please all of you..the masters of this softwares..give me a solution.
thx
Try to reinstall the system...
(rename /andboot/install-seq-disabled.sh to /andboot/install-seq.sh and boot)
touch screen problem
l1q1d said:
Try to reinstall the system...
(rename /andboot/install-seq-disabled.sh to /andboot/install-seq.sh and boot)
Click to expand...
Click to collapse
hi there..
i solved the problem..i took an older Z image..and working fine
the problem is that more applications like camera..media player screen adjust don't work..
they try to run..(i mean ..in camera..i can see..but appears a messages with stop working..sorry). i don't know why..
nothing work well
and what about the contacts..how can i get them from my Sim card?
i don't know..
if you can help me will be great.
thx allot for yours assistance.
best regards.
The information from sim card are very limitated (neither pin code works) so if you want to export contact sync before starting with google and configur your google account on android.
old zimage are full of bugs and all developers install android on nand so starting android from haret has many unfixed bugs.
I've been playing around with the haret install for a week or so now, and I've found that, for me at least, it makes a huge difference which initrd.gz file I use.
The one dated 22-05-10 doesn't let me install any zImages newer than 29-04-10. After trying all sorts of combinations of base files with different dates (haret, zImage) and additions to the default.txt, changing the initrd.gz file to the one dated 20-02-10 fixed most of my problems and lets me install the most recent zImage files without a glitch.
No clue why, just that it works.
I'm running a Pola100 with the original WM6.0 ROM still on it, and radio version 1.58.25.14. Yeah, I need to upgrade to at least the official WM6.1 ROM and probably something better. But I'm a newbie at this, so I need to work up some courage first ;-)
hello,
I tried to install android on sd following your instructions, everything seems to go well until the screen where it says:
"Welcome to htc vogue Frøya
touch the android to begin "
I'll try, but the touch does not work, I tried using the d-pad, which does work, but I can only select the language and the emergency call.
zImage as I used: zImage-Frøya-15-07-10
androidinstall.tar as I used: Incubus26Jc's Super Frøya RLS11 Themed
please help me because I would switch to Android!
thanks
Try with latest kernel version on kernel (i release it yesterday)
l1q1d said:
Try with latest kernel versin on kernel (i release it yesterday)
Click to expand...
Click to collapse
where can I find it?
thanks
I tried it unsuccessfully. Boot starts regulary, always ending on repeating error, looping forever.
I can read something like:
==============
ERROR no local apt for prog ... replying anyway
...
Setting function 4 for gpio ... that I don't own
==============
Is it related to which system file ? Loader? Kernel ? Or what ?
Thanks
What did you use for your installation?
I used the files mentioned at the very beginning of this post.
Regarding zimage: zimage-24-05-10
Hello again, after following the steps to install andorid the SD card, once Android starts the splash screen appears but we do nothing and leave after a few seconds for the screen and I can not do nothing. Just a soft reset.
I put the new version's Incubus26jc Super Frøya (RLS11)
Regards,
gruixut
if you are using the original Polaris, POLA100, then following post #8 of this thread: hxxp://forum.xda-developers.com/showthread.php?t=729676 (you need to change the hxxp prefix to get the URL link) and use the kernel there and additional boot parameter.
Now function ok,
thanks
gruixut