Related
basicly what the title says
im new to rooting never done it before i fallowed everything correct downloaded the hack kit made my goldcard ran the "hackerize-ace install-downgrade" this time first because the guide i found had that but before i did "hackerize-ace setup-downgrade" then install-downgrade and once it reboots i hit power and it does everything fine then after checking...w/e.zip it says the error above...and i just power it back on tried a few times thought it was just a 1 time thing..it wasnt
bloodyxscar said:
basicly what the title says
im new to rooting never done it before i fallowed everything correct downloaded the hack kit made my goldcard ran the "hackerize-ace install-downgrade" this time first because the guide i found had that but before i did "hackerize-ace setup-downgrade" then install-downgrade and once it reboots i hit power and it does everything fine then after checking...w/e.zip it says the error above...and i just power it back on tried a few times thought it was just a 1 time thing..it wasnt
Click to expand...
Click to collapse
Model ID error means that the gold card you created is no good. You need to remake it. There is a thread in the General section that describes a better method to try.
Make sure your phone is in disk mode when making the gold card. Try a different micro sd card and make sure you fully format the card, "DONT" do a quick format.
equlizer said:
Make sure your phone is in disk mode when making the gold card. Try a different micro sd card and make sure you fully format the card, "DONT" do a quick format.
Click to expand...
Click to collapse
hopefully your right...i dont have another micro sd card and im not ganna buy another 1 but im currently formatting it instead of quick format then ill use hxd again and then try downgrading hope it works
There is an app in the market called goldcard helper. Just make sure and copy mmc2. It defaults to mmc1. Hope this helps
I was in the same boat for a while. It seems when I was doing the copy of goldcard.img over to the actual card it wasn't working. I ended up going the HxD route to copy the data over to the card and selected PHYSICAL disk instead of logical like I had been and it worked without issue after that
Well question is why when I make gold card why does it contain symbols and letters makes no.sense
lsbe said:
I was in the same boat for a while. It seems when I was doing the copy of goldcard.img over to the actual card it wasn't working. I ended up going the HxD route to copy the data over to the card and selected PHYSICAL disk instead of logical like I had been and it worked without issue after that
Click to expand...
Click to collapse
from this beautiful shiny device they call "inspire"
I've been up all night I even replaced the symbols with .'s and still nothing good at all sucks idk what to even do
from this beautiful shiny device they call "inspire"
happened to me also....i just did everything from step one ....again..and it worked...but when i i did the hackerize-ace **** and it booted my phone into bootloader...my pc kept disconnecting with phone...and than it said again...installing drivers..failed device drivers werent installed..so in that case my phone wasnt being detected.....fk the gaynes...so i left phone as is...uninstalled drivers...than reintalled drivers...and than it connected and than whoala..it worked...lol...weird
... is for Morse Code, . is what you use in sentences
Well how did u uninstall drivers and reinstall
youngv408 said:
happened to me also....i just did everything from step one ....again..and it worked...but when i i did the hackerize-ace **** and it booted my phone into bootloader...my pc kept disconnecting with phone...and than it said again...installing drivers..failed device drivers werent installed..so in that case my phone wasnt being detected.....fk the gaynes...so i left phone as is...uninstalled drivers...than reintalled drivers...and than it connected and than whoala..it worked...lol...weird
Click to expand...
Click to collapse
from this beautiful shiny device they call "inspire"
well i went into astro manager and deleted the files i could find that were for it and im now pushing them back to the sdcard so guess ill findout what happens might need to try and do the goldcard again
for anyone having this problem still(i just got mine working) all i had to do was format the sdcard again i just did the quick format then i used the command prompt way of getting the cid code instead of the last few times i used the goldcard helper app and copied the code pasted it into the site that reverses it then when to get my goldcard made and it worked i noticed it was different dont know what i was doing before but if u do it right its really easy. then i just downgraded currently doing that and its working PERFECT
bloodyxscar said:
for anyone having this problem still(i just got mine working) all i had to do was format the sdcard again i just did the quick format then i used the command prompt way of getting the cid code instead of the last few times i used the goldcard helper app and copied the code pasted it into the site that reverses it then when to get my goldcard made and it worked i noticed it was different dont know what i was doing before but if u do it right its really easy. then i just downgraded currently doing that and its working PERFECT
Click to expand...
Click to collapse
I think the Goldcard Helper app already reverses it for you...
I've tried everything still get that error
I had the same problem its your antivirus and/or firewall you hav to disable your firewall and completely uninstall your antivirus and it will work fine
Sent from my insire using XDA App
I don't have a anti virus and I just turned off my firewall...maybe its a bad download
Sent from my SAMSUNG-SGH-I897 using XDA App
This error is due to your goldcard. You have to redo it.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
But im making the goldcard right.... ive followed even 14 different instructions and non of them work =/
Once your fire wall is off and antivirus is uninstalled, download which ever rooting app u use then run it from beginning. I used bubbys rootind app and it was so easy.
Sent from my Desire HD using XDA App
I can be contacted here: [email protected]
Anyone able to help with Root ? I picked up a link in a HTC thread on Whirlpool
http://forum.xda-developers.com/show....php?t=1192300
got as far as S Off (Security Off), Updated Clockwork Recovery mod- v4.0.1.4, Now I am stuck on To permanently root your Sensation part 3. When trying to update: When I go to flash clock work/Revolutionary it says: (bad) Can't open Install aborted, though that said some users are having this error and the root is still successful according to XDA however for me I got Root check off the Market and it returns a failed result on Basic and some times a pass on Advanced but some times not. Busybox,Super user,Titanium back up are all saying I'm not rooted to don't have Root permissions.
Have a look at the link below it contains 4 photos of my sensations screen as I went through the process it will no doubt give you a better idea of my problem. It's a link to my blog BTW. Any help would be greatly appreciated. I am not a member of XDA so thought I would try my luck here before having to create yet another account somewhere Thank You.
Best look at the photos from bottom to top as they uploaded back to front, order of process is bottom to top.
http://mathewmurrayharrison.blogspot...sensation.html
Phenomenal MATT writes...
Anyone able to help with Root ? I picked up a link in a HTC thread on Whirlpool
So did you download this http://forum.xda-developers.com/atta...8&d=1311991644 file and flashed it via recovery?
I have S-OFF and I flashed that file I have full root. I then used ROM Manager to flash clockworkmod (CWM) because ROM Manager doesn't see the recovery that came with the S-OFF.
I just backed up my Telstra ROM. It just finished a minute ago.
Yes I did flash that via Recovery inc. the old su-2.3.6.1-ef-signed.zip AND the new su-2.3.6.3-efgh-signed.zip.version I've tried the other couple of suggested methods on that link I posted and nothing seems to be working. Sadly can't see were I have gone wrong.
Here is a link to another two photos with the error message I am getting.
http://mathewmurrayharrison.blogspot...blog-post.html
Phenomenal MATT writes...
Yes I did flash that via Recovery inc. the old su-2.3.6.1-ef-signed.zip
Did you install ROM Manager? I installed ROM Manager and used that to flash CWM and all is working fine here.
EDIT:
My bad. You did say you can't get full root. Don't really know why it won't work for you. Mine worked first go.
Phenomenal MATT
Yeah I have Rom manager but I can't do anything with it everything returns an error.
Phenomenal MATT writes...
Yeah I have Rom manager but I can't do anything with it everything returns an error.
I just figured that out, my bad. I understand that rooting doesn't stick.
Phenomenal MATT
Sounds like you were one of the lucky ones cause if you read the comments after the steps many people are have minor issues. I'm ashamed to say I've being at it all day VERY FRUSTRATING !!!
Yes I put the ZIP file into 'The Root' of the SD card (Main section of SD Card) and yes in recovery I can see that zip file but when I click open it says:
Can't open /sdcrd/su2.3.6.3-efgh-signed.zip
(bad)
Installation aborted.
I've tried over 30 times same thing every single time. HEADACHES !!! lol
Sooo looking forward to a solution. I might have to creat a XDA account and post it in the questions section there, looks as though questions are getting answered pretty quick (Good support) ...WITH ALL THAT SAID IF ANYONE HERE CAN HELP I WOULD BE MOST GRATEFUL.
Phenomenal MATT writes...
Can't open /sdcrd/su2.3.6.3-efgh-signed.zip
(bad)
Installation aborted.
You've probably already tried this, but if not, have you downloaded the su zip again? could it be corrupt?
EDIT: I am really new to Android. Got my phone the day it came to Telstra. You are probably better off on the XDA forums.
Phenomenal MATT
I signed up for XDA but they expect you to make 10 posts elsewhere on their forum before allowing you to comment on the Sensation Dev. one (The comments under the instructions in this link:
http://forum.xda-developers.com/show....php?t=1192300
Yeah I downloaded it on PC, Mac, Mac with Boot camp, Zipped, un Zipped and even tried the old Zip file it says to try in trouble shouting section then followed buy the new Zip file.
Awwwww Well Patients a vertue ... Hopefully it's all worth it.
Seems like the guy already gave you your answer. Just download the zip again. You probably have a corrupted download. And make sure that signature verification is off in recovery. Should work.
I've downloaded over 30 times on 3 different computers + straight to Sensation as a hard Disk tried Zipped, unzipped you name it... PC - Mac Normal sd card, Micro SD card... & Also like to add Sign. verify is off too tried it on and off, I a award the file needs to be zipped and that needs to be off just trying everything here pulling my hair out.
Do You go CWM > Advance . backup ur Rom ?
I'm using rev. And I go to backup and restore click on back up after its complete 10 minutes later I go and try to get the zipped file but it fails every time.
Sent from my HTC Sensation Z710a using XDA App
Finally got it to work. I had to download it from the net with my phone to download folder as opposed to with a pc then moving it to main root folder on SD card. Question is now what ? I want to over clock but I want to keep sense. Do all Roms remove sense ? Leedroid ? What else is recommended now I'm rooted. Btw thanks again everyone for your help.
Sent from my HTC Sensation Z710a using XDA App
Thanks Matt
Thanks for posting this, Phenomenal Matt. I had the EXACT same problem that you posted about. Copying the su zip file to my phone's sdcard while the phone was mounted as a drive did not work at all. I had to download the su zip file on my phone before Clockwork Recovery was able to successfully install it and give me root.
Not a Rooting NOOB here, I have rooted several HTC Arias/Liberty, Motorola Backflip with Emulator and did not have problems anywhere close to this. I have tried Z4Root (NoGo), VISIONary + R14 (NoGo) and the Ace Hack Kit V12(aahk 29102011) which is the newest release. I have tried this on 2 PC's running WINXP and on both machines I have disabled AntiVirus, Malware and so on, I have looked at all my services and stopped anything listed in the EffenManual and below is what both PC's are telling me when I run the Ace Hack Kit.cmd (AS ADMIN).
file "tasklist" is missing or corrupt.
Your PC Windows ENV is damaged and should be repaired.
At least one default system file is missing, corrupt
or the Windows PC env has been otherwise compromised.
The Hack Kit quits before damage is done to your phone.
Retry with a different PC or try a 32-bit Ubuntu Linux LiveCD.
Press any key to continue . . .
ANY HELP or a Workaround with this would be greatly appreciated. I have rooted, Flashed ROMS, and so on to over 7 different phones with no issues ever, so I know I can do this, but I need a lil help.
Thanks in advance for anyone here that can help with this.
I ran into this. If you are running XP Home version, you need to use the alternate command file that has xph in the title, hack-ace-xph.cmd.
Sent from my HTC Inspire 4G using Tapatalk
fernandezhjr said:
I ran into this. If you are running XP Home version, you need to use the alternate command file that has xph in the title, hack-ace-xph.cmd.
Sent from my HTC Inspire 4G using Tapatalk
Click to expand...
Click to collapse
Consult the irc chat..they will get you fixed up quicker then this thread will...read the op in the hac kit thread
Sent from my Inspire 4G using XDA App
Thanks for the info it was very helpful, I have successfully rooted & Installed ClockwordMod Recovery & SU & Rom Manager. Now the phone states that my SD Card is damaged and asking to reformat, Do I click yes or No, the SD card was changed to a Goldcard and not sure if formatting will erase those changes done by the Hack Kit. This is not explained in the Effen Manual. Any info would be greatly appreciated.
Aero1975 said:
Thanks for the info it was very helpful, I have successfully rooted & Installed ClockwordMod Recovery & SU & Rom Manager. Now the phone states that my SD Card is damaged and asking to reformat, Do I click yes or No, the SD card was changed to a Goldcard and not sure if formatting will erase those changes done by the Hack Kit. This is not explained in the Effen Manual. Any info would be greatly appreciated.
Click to expand...
Click to collapse
If your card is bad, it might not help to format, but give it a try. As far as goldcard, it's only needed to install the glitchable kernel/radio and you don't need it ever again now that you're rooted.
Thanks...Kudos for all the help & Info
Thank yous go out to the thread repliers, this helped me root and solved all my issues. Im closing this thread now.
Thanks again to this Site & Forum for all the info, very greatful.
Bought a rooted Captivate on ATT with ICS 4.0.4 and cyanogen 9. Tried to unlock it but could not get nv_data.bin to copy to my sdcard. Ended up just calling ATT and they gave me the code.
Forgive me if these answers are here. I looked, I couldn't find them.
Why doesn't cat /efs/nv_data.bin >> /sdcard/nv_data.bin result in the file being copied to the sdcard next to the sim card? Does that sdcard have a different name? I put an apk file on there via my computer (LOST.DIR was there from the phone, btw) but the phone said nothing was on the sdcard, which means I'm looking at the wrong sdcard somehow?
Why does my SGH-i897 have an i9000UGKG3 baseband and does that make the phone a GT-i9000 or is it still an i897?
Why does Google Play not allow registering a second device so that the app store can be accessed? I got the apk for the store downloaded and installed, but it just launches and then immediately closes.
I found KIESAIR-1.apk, downloaded it but that halts with a message "Application not installed." No idea why. Tried two versions of Kies Air. Both installations halted. I did check allow unknown sources. I want Kies Air because I cannot get USB to work with the phone on three different Windows laptops and that's a whole other kettle of fish.
Much appreciate any info you can share.
-Bob
To answer your first question, i think the command would be going to /mnt/sdcard instead of just /sdcard.
I loathe kies air. You can use "Air Droid", it should be on the market. There are other similar applications where you can transfer files via Wi-Fi. Hopefully someone else here will help you with accessing the market.
The baseband is the modem(or radio, not sure what term exactly) your phone is running, which is what the phone uses to get a signal and access the data network People report higher data speeds, better signal, and better GPS reception with different modems. It's still a Samsung Captivate. I'm using an I9000 modem as well.
That's all I can answer for you, I'm sort of a newbie too. Lots of reading and googling helps.
the micro sd card is mounted as
/sdcard/external_sd
the path /sdcard is the internal user storage.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Thank you very much. So that I can have better luck with Google searches in the future, can you tell me how you came to know this? All I came up with in my searches was /mnt/sdcard but that turned out to be the system card and I'm lucky I didn't screw up anything.
Found the various wikis on XDA for Captivate and now reading through them.
laughingT said:
the micro sd card is mounted as
/sdcard/external_sd
the path /sdcard is the internal user storage.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I had tried that, but forgot to mention it. As somebody else pointed out, that turned out to be the system card.
bobcov said:
Why does Google Play not allow registering a second device so that the app store can be accessed? I got the apk for the store downloaded and installed, but it just launches and then immediately closes.
-Bob
Click to expand...
Click to collapse
Are you sure gapps was ever flashed once CM9 was installed? You might flash it again anyway and see if that helps. I've never known Play to limit registrations.
It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.
bobcov said:
It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.
Click to expand...
Click to collapse
When you install cyanogenmod Google apps (gapps) aren't included. If the previous owner didn't add them then none of your Google apps nor your sign in will be present. Even if it is already installed a reinstall may help.
Download this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
Reboot to recovery and install zip from sdcard. You'll have to find and choose the file you just downloaded. Reboot and see if things aren't square.
You can also do a nandroid backup from the recovery so you can get back to where you are now if things go awry. Side note, if you want to install the latest cm9 nightly the method is the same.
You can find clearer instructions via the cyanogenmod site should you feel uneasy about proceeding. I'm away from the PC and typing from my phone or I'd try to be more thorough. Good luck!
---------- Post added at 08:28 PM ---------- Previous post was at 08:19 PM ----------
bobcov said:
It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.
Click to expand...
Click to collapse
I just checked and found my contacts where you mentioned. You probably just need to copy the file using a file manager and move it to an accessible location you can see from the PC. I like root explorer. ES file manager is good, too, and free.
Since you may not have gapps I'd try that first and it may create the contacts db.
Hi,before I can try what you suggested, I need to straighten out what's up with my file system. I still cannot see my external sd card in file operations, even though the phone shows it is present, lets me mount and unmount it. If I copy something to it from the laptop using a card reader, nothing shows up when it is mounted in the phone. The other mystery is that with ES file explorer, I still do not see the contacts.db file path, so I'm doing something wrong. Once I can see that path and see the external sd, I'll follow your instructions.
-B
Make sure you have root function enabled in es file explorer. It's in settings.
With the external sd , on cm9 you'll find it at /emmc. (or /mt/emmc)
But read up on flashing.... You won't regret it.
Sent from phone with app
i believe the external sd card is called emmc on the ics roms
try opening a terminal emulator, then type:
df
the ouput from df will give you total space and free space for mounted paths, including your sdcard, if it is mounted.
if you want to see rootsystem files, run su before df.
there is a free terminal emulator on google play, aka market, if you need it.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
bobcov said:
Hi,before I can try what you suggested, I need to straighten out what's up with my file system. I still cannot see my external sd card in file operations, even though the phone shows it is present, lets me mount and unmount it. If I copy something to it from the laptop using a card reader, nothing shows up when it is mounted in the phone. The other mystery is that with ES file explorer, I still do not see the contacts.db file path, so I'm doing something wrong. Once I can see that path and see the external sd, I'll follow your instructions.
-B
Click to expand...
Click to collapse
At this point, how do you feel about starting over? Some people aren't comfortable with a full factory reset and/or starting over with stock gingerbread, but I'd be leaning toward that at this point. I'm not completely sure it's necessary but I've wiped clean for less.
Well, after many days, I am now finally importing 750 contacts without exposing any of them to a 3rd party server such as Google, etc.
1. There's a link here somewhere for version 1.3.450.0 "Samsung USB Driver for Mobile Phones. The filename was SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
2. Forget about Kies. Somebody said it won't work unless it sees Touch Wiz. I don't know if it would work under any circumstances.
3. For my 750 contacts in blackberry, I made an .ipd backup of the blackberry using the RIM software, then used ABC Amber Blackberry Converter which can extract data from IPD backups and exported my contacts as CSV.
4. I used Windows Address Book to read the CSV file created by Amber and saved the file with .WAB as a Windows Address Book file.
5. I used the inexplicably free and astoundingly well-executed Wondershare MobileGo for Android program to link to my phone. On one computer it immediately identified the model and showed all contents. On another computer, it could not see the phone, and went to the web without prompting, downloaded a driver, installed it and loaded the phone into the program. Amazing. All I did was click on contacts on the left and then the small down arrow under the word "Import" on the Import icon. It took me about an hour to realize this was how to get the program to import different formats other than vcard. It somehow immediately found the .WAB file, and imported the 750 contacts where are now on the phone.
6. For the purposes of entertainment for those who know better and education for those who don't, here were some of my downfalls: All the apps may respond to that little funny symbol on the left, below the keyboard adjacent to "Samsung." I didn't know for the longest time that was a critical menu key. Also mirthful, I didn't know that you can just draw downward from the top of the screen and get a kind of status page where you will see "USB connected" which you must press if you want to copy stuff to the phone. I will now read the phone's manual.
It seems that the external card under Cyanogenmod 9 is /mnt/emmc/ instead of where programs expected it to be. I got a program called Directory Bind and tried to make it so that /mnt/emmc/ would automatically be seen as /mnt/sdcard/external_sd but it said that that wasn't a valid target. Any ideas there? Meantime I have done it from terminal but I don't think that will stick beyond a reboot.
Damn you learn quick. When I first discovered the menu key it was like discovering a while new world.
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
Ok, Can you boot to Odin mode (dowload mode)?
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
buhohitr said:
Ok, Can you boot to Odin mode (dowload mode)?
Click to expand...
Click to collapse
No. Once I used EZ Unlock, I was bricked.
SlimSnoopOS said:
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
Click to expand...
Click to collapse
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
I also have bricked S3 different circumstances but still hard bricked. Nothing I've tried here on xda or anywhere else has worked. I'm going to try this http://www.ebay.com/itm/281217379767?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 . It is probably the cheapest and easiest way.
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
Click to expand...
Click to collapse
It usually takes a few tries to get it to work, but if you really can't then you can always send it in for a jtag repair.
Mobile tech videos will do it, and there's someone on eBay who will do it for $30. Not too expensive.
Sent from my SCH-I535 using Tapatalk 2
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img.
And then I can seem to make that run either.
Click to expand...
Click to collapse
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
SlimSnoopOS said:
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
Click to expand...
Click to collapse
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Follow Up: I figured out what I was doing wrong. I was attempting to pull the "bin" file through Win32 and should have been pulling the "zip" file instead. I was able to write the debrick.zip file onto my SD card but wasn't (on first attempt) able to load my phone. Are there any other steps I may have misunderstood or overlooked?
TwistedPoet said:
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Click to expand...
Click to collapse
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
SlimSnoopOS said:
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
Click to expand...
Click to collapse
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
TwistedPoet said:
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
Click to expand...
Click to collapse
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I'm not turning away knowledge. I'm still very new to this and obviously have a hard time following directions. I was looking at the next steps on that guide and am all ready confused enough to not do anything yet.
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Always_Jonezen said:
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Click to expand...
Click to collapse
Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly, I put the SD card back into the phone, put the battery in, and plugged phone into computer. Pushed the power button and the phone came back on.
When you go to download that file with Win32, change the file type to "." - then you'll be able to select the debrick.zip
All files were obtained here - http://forum.xda-developers.com/showthread.php?t=2581166
I hope that helps.
TwistedPoet;49543890. Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly said:
http://forum.xda-developers.com/showthread.php?t=2581166[/url]
I hope that helps.
Click to expand...
Click to collapse
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Always_Jonezen said:
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Click to expand...
Click to collapse
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Always_Jonezen said:
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Click to expand...
Click to collapse
Did you brick BEFORE 4.3? I hovered over this link in SpyroDazee's post: "Debrick if you bricked before 4.3 OTA" and that's the only one that would download as an IMG. Press "Debrick if you took the 4.3 OTA" and it will download as a zip.
Or change the browser that you're using. I downloaded it using Chrome on my MBP.
Sent from my SCH-I535 using Tapatalk 4
I did brick on 4.1.2 and I am using chrome as my default browser