KB1 modem - Captivate General

I have saw several posts about people liking for a download on kb1 modem. It is now available in the market app SGS Tools.
Open app»ROM Tools»modems.
This wasn't there before their last update. They also have a few kernels and roms there.
And, IMO SGS Kernel flasher is prob the easiest way to flash a kernel,w/o using odin. Even I can do it (just dont forget to disable/undo lagfix.

thanx mrharley-i had this before i was looking to flash my modem-couldn't find modem download, so thanx again

Related

[ROM] EA11 Mesmerize Pick-n-Pack 0.1

********This is only a ROM. You must have first flashed the EA11 LEAK first.********
********You must have the modified RED CWM recovery to flash this. If you don't already have that installed, go here to get it.*********
*********DO NOT FLASH THIS IF YOU ARE STILL ON 2.1************
As always, I am not responsible for what you do to your phone. Make a backup before you flash anything.
Download the ROM and the addons. (unzip the main addons zip) Decide what addons you want. Put everything on your sdcard and boot into recovery. Flash the ROM first. Flash any addon packs that you have put on your sdcard. Reboot.
I've tried to group the addons so there aren't too many of them. If you want, you can always reconfigure things using 7zip without having to unzip anything. If you don't know how to do this already, it's probably best to just flash each pack seperately.
EA11 Mesmerize Pick-n-Pack ROM
EA11 Mesmerize PnP Addons
Thank you sir very much
Sent from my SCH-I500 using XDA App
Now for some voodoo?
Sent from my SCH-I500 using XDA App
why do we need to flash the original Froyo leak first?
i dont understand this Mez thing about using Odin.
once you have a Rom flashed to your phone and Clockwork working there is never ever ever a need to use this odin program. i have never once used it and have flashed a few roms, one of them your very own pick-n-pak , just not the froyo one.
so can someone explain to me this crazy need to backdoor flash the phone?
the Froyo leak is just a rom, just like this and every other rom. its just a factory flash rom, not a rom you guys built....
so why not just build a rom from it because the odin stuff seems just to be massive unnecessary overkill.
v_lestat said:
why do we need to flash the original Froyo leak first?
i dont understand this Mez thing about using Odin.
once you have a Rom flashed to your phone and Clockwork working there is never ever ever a need to use this odin program. i have never once used it and have flashed a few roms, one of them your very own...[etc, etc]
Click to expand...
Click to collapse
It doesn't seem like a bad idea to have a stock backup solution available.
v_lestat said:
why do we need to flash the original Froyo leak first?
i dont understand this Mez thing about using Odin.
once you have a Rom flashed to your phone and Clockwork working there is never ever ever a need to use this odin program. i have never once used it and have flashed a few roms, one of them your very own pick-n-pak , just not the froyo one.
so can someone explain to me this crazy need to backdoor flash the phone?
the Froyo leak is just a rom, just like this and every other rom. its just a factory flash rom, not a rom you guys built....
so why not just build a rom from it because the odin stuff seems just to be massive unnecessary overkill.
Click to expand...
Click to collapse
This ROM doesn't have a kernel or a modem with it. If you don't have those files, your phone won't work.
The Froyo leak is NOT a ROM it is a recovery system just as the recovery system for 2.1. It has everything in it.
Odin is not overkill. It's just a different way of flashing things. As soon as we have everything in place for a fully flashable ROM including kernel and modem, that will be an option too. My original PnP ROM also did not include a kernel or modem, but you were already on 2.1 so you didn't need to get there. Had you have been on 1.6, you would have had to update.
Also, there is only two of us working on all of this. We can only do so much. We are trying to do what we can, with what we have. If you can help us out, hit us up on irc. We could use the help.
help?
i just flashed and got a boot loop anything?
mesmerbelly said:
i just flashed and got a boot loop anything?
Click to expand...
Click to collapse
Hit the irc channel. I didn't have any problems, and neither did any of the others that flashed. We'll get you fixed up.
duhh
i just needed to wipe everything duhh belly think then ask
could you plz tell me where the bootanimation.zip goes in this...i miss my dancing droid...i got the music to work but no animation
v_lestat said:
why do we need to flash the original Froyo leak first?
i dont understand this Mez thing about using Odin.
once you have a Rom flashed to your phone and Clockwork working there is never ever ever a need to use this odin program. i have never once used it and have flashed a few roms, one of them your very own pick-n-pak , just not the froyo one.
so can someone explain to me this crazy need to backdoor flash the phone?
the Froyo leak is just a rom, just like this and every other rom. its just a factory flash rom, not a rom you guys built....
so why not just build a rom from it because the odin stuff seems just to be massive unnecessary overkill.
Click to expand...
Click to collapse
Over 700 posts here and a thanks meter of 1.. <-- maybe you should just cool off a bit..
Two things:
Number one: Read my reply to your la]st rant. It explains a lot.
Number two: As far as I know, phidelt82 and I are the only ones who own a Samsung Mesmerize and are offering our time up to work on this stuff. Thank God our device is very similar to the other Galaxy S devices so we can dip into the community and share resources where appropriate. I promise you without the resources of the great XDA community, you would have none of this from us.
To answer your burning question I already answered once:
The reason we don't have this in an update.zip form yet is because I am a college student who spends most of his days studying. Every so often I get some *leisure* time to spend working on things I enjoy -- like helping out this community here. I am not as skilled as the prominent Fascinate devs but I am learning. So is phidelt. The refined packages will come.
The fact that you are so worked up about ODIN tells me there are reasons far beyond your understanding as to why we are using it. There is nothing wrong with odin. IT DOES THE SAME THING THAT YOUR RECOVERY PARTITION DOES/CAN DO.. just attached to the computer. I actually think it's more reliable (well at least Heimdall is) and easier to use.
If we were to release a froyo-update.zip and everyone tried it out, without ODIN, they would be potentially stuck in 2.2 land. That would be a big hassle donchathink -- especially because EA11 is not a final release, there ARE some bugs? The current solution for Fascinate users is to flash a froyo.zip from their phone, THEN USE ODIN to flash a <2e> recovery partition so that CWM will work properly. Why not do it all in Odin for the Mesmerize for the time being? Once there is a reliable solution that doesn't need ODIN/Heimdall, I promise you, it will be implemented.
Cool off. I've wasted enough time responding to your ignorance. I am being abrasive now because I already answered you once, and you find the need to ignore the contents of my reply and rant about the same old..
I had some time to put up a new package tonight, but, thanks(?) to you, that's not the case anymore.. =/
you tell him dcow....i like odin...its simple and reliable...cant complain about that
on topic : love this rom...used it on 2.1 and so exited its on froyo now...great work!!!
Yikes, what ever happened to the rule of "If you don't like it, do something about it." ?
For the record, dcow and phidelt, you guys are awesome and I very much greatly appreciate putting your extra time into this!
Amen!
BIG thanks to dcow and phidelt. Without your efforts, I'd still be on stock 2.1. Just wanted you both to know your time and effort is appreciated. Don't know how many of these phones USCC has sold, but it's got to be a small community in comparison to, for example, the Fascinate.
Glad the other devs have been kind enough to help you out where they can...big thanks to them as well.
BakedTator said:
could you plz tell me where the bootanimation.zip goes in this...i miss my dancing droid...i got the music to work but no animation
Click to expand...
Click to collapse
as of right now till we get a custom kernel there is not much you can do. this one uses qmg files in the /system/media folder for the startup animation. you can delete or rename them so its black but i have yet to find any good working qmg. i have actually found one file and it is 4meg and the animation doesn't finish by the time the desktop apears. the stanard one on our phone is only like 2 to 2.5meg
so your telling me i (or someone with the skills) is going to have to learn how to convert the zips into qmg files? or is there a program we could use...imma google it but if you or anyone knows anything about this plz tell me...im willing to learn and try this out
http://forum.xda-developers.com/showthread.php?t=792953
We're going to have to do some research =/, or possibly need a MOD to the rom first.
You guys rock! Back to being bloat-free...and on 2.2
phidelt82 said:
This ROM doesn't have a kernel or a modem with it. If you don't have those files, your phone won't work.
The Froyo leak is NOT a ROM it is a recovery system just as the recovery system for 2.1. It has everything in it.
Odin is not overkill. It's just a different way of flashing things. As soon as we have everything in place for a fully flashable ROM including kernel and modem, that will be an option too. My original PnP ROM also did not include a kernel or modem, but you were already on 2.1 so you didn't need to get there. Had you have been on 1.6, you would have had to update.
Also, there is only two of us working on all of this. We can only do so much. We are trying to do what we can, with what we have. If you can help us out, hit us up on irc. We could use the help.
Click to expand...
Click to collapse
ahhh i see, it is a rom but its a radio-less rom. - so wait.... if its a radioless rom then why are we flashing it with odin... i dont understand.
and yes odin seems nice, but to have to use this instead of just flashing via clockwork seems rather unconventional
On the EVO we had the official and leaked HTC flasher but to use it meant you lost root. the teams just made a flashable rooted rom
i know that isnt the case with the Mez. but it seemed silly to me that since you had the Samsung recovery, and you had your pick-n-pak... then why not just make a flashable rom.
am i mistaken here ? why not jsut make a rom since you have the stock recovery and the necessary files, just make a rom we can flash via recovery.
so i guess i am lost, if its radioless why are we using it and how is anything working if its not a rom, and missing said files.
p.s.
i sure with amon ra would become available for the Mez lol.
bdemartino said:
http://forum.xda-developers.com/showthread.php?t=792953
We're going to have to do some research =/, or possibly need a MOD to the rom first.
Click to expand...
Click to collapse
i will do my best to help in this research (though im still rather new to all this) and help out in any way i can...maybe with the power of 2 (or more) Brains we can get this working too!

[Q] Verification Prior To Custom ROM

OK, so I should have done it before I flashed the wrong firmware.
That's beside the point. After doing some research, I found someone with a similar situation that was able to flash their SGS with Heinz 57 and recover their mess up.
I am currently operational with USCC's 2.2.1 Froyo, but with no internal phone storage available.
I plan to flash with Heinz 57.
I did the CWM already. Will likely do it again for verification when I start this.
I will flash my Kernel with:
Touchwiz Froyo
imnuts
PeanutButta Jelly Time (Release 0531 with voodoo, no undervolt)
I will then flash with:
ROM Heinz 57 v1.2 with PBJT
I will likely flash a custom theme after that.
...but that is later and not as important.
Both the Kernel and Custom ROM are .zip files that Odin3 doesn't see, do I change their file extension to a .tar or extract them and re-compress them as a .tar?
Just extract them and use them that way?
Should the Odin3 re-partition box be checked?
Will I need a .pit file as well?
Where should I place the specific files prior to flashing? PDA/Phone/CSC?
I will likely do the flashing later this week when I have more time. My first attempt, I ran out of time and caused myself extra stress.
Thanks for the verification and info! Appreciate the time everyone puts into helping others!
You flash the rom and kernel in custom recovery or cwm. Odin is really only for going all the way back to stock. I haven't seen to many roms made available to be flashed in odin. As for the repartition. When flashing back to stock.I alwayd use that trick. Now the main thing to remember is to uncheck it when flashing the cwm package. Hope this helps.
Tap-a-Talked from my Mesmerize
Running CM7 @1.2ghz w/ Tk-Glitch ML Kernel.
Much love to all the Dev's working to advance the Mesmerize and Fascinate. You guys Rock!
I would suggest reading the second sticky in this forum (newbies guide...) and really spend some time with it before you do anything more. Flashing roms and kernels is not same as recovery.
Sent from my SCH-I500 using XDA Premium App
never, never, never ever use anything in odin besides pit and pda section! I would suggest you read the stickies as started above, it will help you. then read them again, then read a few more threads in the fascinate section and their stickies, then you'll
have misty oh the answers you seek. before flashing you should be sure of what youre doing,.and if you aren't sure, do not do it. you need to read more because if it breaks nobody can fix it BUT YOU.
not trying to sound preachy but I've been in this boat and thank god people told me I needed more information, it saved me cuz I knew how to fix my error.. good luck
Sent from my SCH-I500 using XDA Premium App

[Q] From GB 2.3.6 to Stock KJ6

Guys please forgive the newb question but I need to know the easiest way to do this without bricking my fathers phone.
Last week I flashed his stock Froyo phone to the leaked Gingerbread 2.3.6 version for his SG4G. He is not happy at all with the wifi and wanted to go back to the stock TMobile Froyo. I didnt want to attempt that, but now see that Samsung/TMob have the KJ6 Official release available. I want to know how can I flash this rom to his phone? Will mini Kies see his phone when I plug it in and recognize there is an upgrade available? Or is there a way to use Odin and load the official version of the rom to the phone? I really appreciate any direction you guys can provide me.
Thx
Ken
desertsportsman said:
Guys please forgive the newb question but I need to know the easiest way to do this without bricking my fathers phone.
Last week I flashed his stock Froyo phone to the leaked Gingerbread 2.3.6 version for his SG4G. He is not happy at all with the wifi and wanted to go back to the stock TMobile Froyo. I didnt want to attempt that, but now see that Samsung/TMob have the KJ6 Official release available. I want to know how can I flash this rom to his phone? Will mini Kies see his phone when I plug it in and recognize there is an upgrade available? Or is there a way to use Odin and load the official version of the rom to the phone? I really appreciate any direction you guys can provide me.
Thx
Ken
Click to expand...
Click to collapse
Ken,
* You would have to flash back to KD1 (http://forum.xda-developers.com/showthread.php?t=1063696) to get Kies to see the phone as a registered device. Thanks to Whitehawkx for that.
* ODIN can be used, too, thanks to RaverX3X. He created a version of stock KJ6 for ODIN for people having issues with Kies (http://forum.xda-developers.com/showthread.php?t=1353176)
Hope that helps.
First of all, I would like to apologize for the following flame and trolling. Why, why won't people FU**ING READ!? It ain't that hard! They teach you how to do that since Kindergarten! WTF?!?!?!?! OMFG!!! This has been answered only 100 times per day since source release and 2092189348093284323932873478893221 times since Raver made an Odin version. Now.........................
Go to Raver 2.3.6 KJ6 Odin in dev section. DL and flash through Odin (simple, put phone in dl mode, plug in computer, open odin, load rom file in pda after you extract it from zip, flash... done!). If you want cwm, flash KJ1 kernel from drhonk. Put zipped .tar file in pda section too... well, you gotta' know how Odin works. Same as I explained above, but with different file. Now you have official KJ6, which is same as leaked, with KJ1 (root, cwm). Not responsible for any bricks. This is what I did and worked.
Theres also a CWM version so if you prefer you can use the cwm method. Download rom zip, put in sd card, go to cwm, flash, wait, done. But I think you will have to flash Kj1 kernel to have root and remember to disable voodoo/etx4.
*Before flashing kj6, disable voodoo/ext4.
chris31jct said:
First of all, I would like to apologize for the following flame and trolling. Why, why won't people FU**ING READ!? It ain't that hard! They teach you how to do that since Kindergarten! WTF?!?!?!?! OMFG!!! This has been answered only 100 times per day since source release and 2092189348093284323932873478893221 times since Raver made an Odin version. Now.........................
Go to Raver 2.3.6 KJ6 Odin in dev section. DL and flash through Odin (simple, put phone in dl mode, plug in computer, open odin, load rom file in pda after you extract it from zip, flash... done!). If you want cwm, flash KJ1 kernel from drhonk. Put zipped .tar file in pda section too... well, you gotta' know how Odin works. Same as I explained above, but with different file. Now you have official KJ6, which is same as leaked, with KJ1 (root, cwm). Not responsible for any bricks. This is what I did and worked.
Theres also a CWM version so if you prefer you can use the cwm method. Download rom zip, put in sd card, go to cwm, flash, wait, done. But I think you will have to flash Kj1 kernel to have root and remember to disable voodoo/etx4.
*Before flashing kj6, disable voodoo/ext4.
Click to expand...
Click to collapse
Well Chris, I wish we all were as smart as you with these phones. When I see a Q/A section in a Forum, I see it as just that. I dont care if the same question gets asked 5000000 times and you shouldnt either as long as its asked in the correct area in the forum, so flame away. Im not a developer, so I stay away from that area unless directed. FYI, just prior to your response I saw Stephens response and ventured into the developer area and found the Odin ver. of KJ6 to which I thank RaverX for and Stephen for pointing a "newb" in the right direction.
Sorry I put you out Chris for asking a question in the Q/A section of the forums....
Thanks to all for your support.
no the cwm version is pre rooted just the kernel is not ...
I'm not smart. Ask, Raver. Although the flame, I apologized and helped. Got it working?
chris31jct said:
I'm not smart. Ask, Raver. Although the flame, I apologized and helped. Got it working?
Click to expand...
Click to collapse
LOL. Not yet, but he will be over tomorrow expecting me to fix my mistake (installing the non official release of 2.3.6). All i hear is how crappy the wifi is and how he cant use his wifi calling, LOL. Old timers....
Thanks again!
Chris calm down. Holy crap.
Desert, let me know if you have any more questions. Be sure to do a quick search prior to creating a new thread, but since this one is already created, that point is moot. Pm me if i don't respond. I've been super busy. Also i won't have an sgs4g for a while...I'm on a vibrant right now.
Sent from my T959 using xda premium

Clockwork mod ??

Hi. I am having trouble finding the clockwork mod for this device on this forum. I found some instrucions on the cyanogen mod forum with an oficial rom from them. Which one anyone suggest me? roms from the forum or cyanogens 7. im searching for an ics rom..
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Thank U Very Much
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thank U Very Much, Your guild is awesome worked the 1st time, I been trying for 3 days NOW, THANK U SO Much.
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thanks alot..im going to try that now and se how it goes
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
askpcguy said:
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
Click to expand...
Click to collapse
Ive been flashing for a while now. I have a galaxy fit rooted and with clockwork..i was just asking because i want to now if i do this will it take away my currently settings..since i network unlocked it and am currently using it with claro.. Im on stock rooted 2.3.5 uckk4 unlocked network
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Soooo sorry to bother, but I'm at my wits end trying to root and remod my new captivate. The last one crapped out on me, so I was able to get a replacement, but I don't remember flashing it being this hard 6 months ago...lol! Anyway, here's my current stats and what I'm looking for:
Firmware: 2.3.5
Baseband: I897UCKK4
Kernel: 2.6.35.7-I897UCKK4-CL614489
Build: Gingerbread.UCKK4
I can if need be flash it back to 2.1 with Odin, but I followed your instructions, and now I'm stuck. I can't for the life of me find the captivate-recovery-cwm5-kernel file anywhere, on here or elsewhere. I don't even think the phone is rooted now, which is very strange because I was able to flash it, but anyway...any help would be greatly appreciated! Thanks in advance!!
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Jose0726 said:
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Can't say on that respect, mine is not even being used as a phone, actually - it's basically a DAP/PMP/PocketPC for me.
Still can't find a service provider with a decent plan that I'd be willing to fork over some money for so, until I find one (if I ever do), this Captivate of mine won't even have a SIM in it.
You won't loose network unlock ever unless your EFS gets modified in anyway...
Sent from my SGH-I897 using xda premium
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thank you SO much for the links and all the time you put in to the explanation. I followed your suggestions, and now I'm running ICS Cyanogenmod 9 in dazzling full color!! You've made what could potentially be a very complicated process extremely easy...I wish I could thank your post 10-fold!! How is your ROM on battery life, btw? I was running CM 7 on my other Captivate, and it wasn't all that great on the battery...waiting to see how 9 works, but my girlfriend still insists it was because I had "too much junk" on the phone...lol! Thanks again!!
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
br0adband said:
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
Click to expand...
Click to collapse
Could any one give me a link to the cm9 ics. I recently flashed aokp and dark night but couldnt use my phone as i got a no network message and when try to ad apns settings were not saving :/
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
http://goo.im/cm/captivatemtd/nightly
Bottom of the list, and apparently a new nightly was just posted a short time ago (20120412) so... time for a backup and a flash to see what's changed.
And also remember to get the latest Gapps from that site as well when flashing CM (which is 20120317)
http://goo.im/gapps

stupid (maybe) question about kernels on infuse

so, i have had a few weird experiences during my time owning an infuse with kernels. specifically:
1. for some reason, i thought siyah kernel was compatible with the infuse. if i flashed it through cwm, everything seemed to work normally, so i ass-u-me'd i was getting the new kernel.
one day, i flashed it with odin, and my device wouldn't boot so had to restore it, oops.
why didn't flashing it with cwm do the same thing?
2. i have flashed gb kernels before with cwm, and it _seems_ like they always take, how can i verify this? i know, dumb question.
so, the infuse is fussy specifically about flashing kernels?
does this apply to bootloaders too?
You can use CPU Spy to see kernel details and confirm which one you are actually running.
As to CWM vs Odin, that's really down to what packages you are using, whether Odin is working on your PC (it can be touchy), and whether you've read the fine print to see if the kernel you've selected is actually intended for the infuse.
If it's not listed on the ISET (see my sig), it's probably not going to work.
You could use sgs kernel flasher to flash ur kernels. It'll tell u if your flash was successful and you can unchecked the reboot button to see the log of what it did. I don't think it would stop you from flashing the wrong kernel again. If you ever did that again you could just flash a kernel threw odin without resetting your phone to stock to get it back to running. O yeah with sgs kernel flasher you can backup ur current kernel before flashing the new one.
Sent from my SGH-I997 using xda premium

Categories

Resources