How can you dim the screen further?

How can you dim the screen further? - myTouch 4G General

Hey Everyone,
As has been mentioned many times in other threads:
1) The LCD is often the biggest battery drainer
2) The 'minimum' setting of the brightness setting is still needlessly bright.
It certainly can be pushed further down for dim/night/dark settings.
3) Certain apps "dim" the screen but are just changing the color, not the backlight. So while useful they still aren't helping your battery.
Following some tips from a different android phone, I found this file:
/sys/devices/platform_/nov_cabc.0/leds/lcd-backlight/brightness
Which appears to contain the current 'brightness #' of the LCD backlight.
Using the normal Brightness slider, the value changes from 30 - 255, with 255 being the brightest. So this clearly could be reduced further.
Setting 'Screen Filter' to 50% brightness has no effect on the value.
Here's something interesting:
Assume the screen is already set at lowest brightness.
When I use 'Widgetsoid' to set brightness to '1', the screen dims slightly, then brightens back up. The 'brightness' file gets set to 20.
'widgetsoid 20' feels the same as 'min brightness 30'. - I wonder if Android is enforcing minimum backlight?
Anyway, thought that would be interesting to note. I'm going to download some other screen dimmer apps and see what they do.
- Frank

I found this online which is very interesting reading:
http://www.scribd.com/doc/35972886/An-Analysis-of-Power-Consumption-in-a-Smart-Phone
At '30' they said the display consumed 7.8 mW, while at 255 it consumed 414 (!!!)
Various apps coud push the value to 20 - tasker, adjbrightness.
Tasker tries to set it lower but as with widgetsoid, you can see the screen get forced back up to 20.
adjbrightness can "set" it lower than 20, but the entire screen blacks out, even at 19. Remember where the other buttons are so you can restore brightness!
- Frank

Whoa, thanks for the information. That pretty insane but its an apparently in the Market: Screen Filter, saves a helluva lot of battery.
Edit: Nevermind, Frank shut me up LOL.
Sent from my HTC Glacier using XDA App

I read a thread that said that the stock rom just doesn't allow setting it that low.
Ah well
- Frank

ChodTheWacko said:
I read a thread that said that the stock rom just doesn't allow setting it that low.
Ah well
- Frank
Click to expand...
Click to collapse
Can you set it lower in other roms - like cm7?

netter123 said:
Can you set it lower in other roms - like cm7?
Click to expand...
Click to collapse
I've been playing with CM7 which has some nice features for customizing the auto-brightness settings as well as the "dim" value which seems to be the lowest value the screen will go to and what it gets set to when the screen dims before shutting off after a timeout.
For the Dim setting in CM7, the default is 20. The next highest setting in the picker is 18. I believe it goes down to 0 or 1. When set to 18 or lower the screen blanks out completely when dimmed. Depending on how you test this, you may have a problem getting the screen back, so be careful you know where your widget button is on the screen to bring it back... 20 seems to be the lowest value. However, while dim, in a very dark room it could certainly be even dimmer so I don't know why lower values don't work.
I've also found the light detector doesn't seem to detect a continuum of light levels. It seems to be quantized at particular values, so there's a pretty hard limit on how fine you can set the auto brightness levels since the lowest light reading it seems to take is not very sensitive. It can't seem to distinguish between a fully darkened room and a dimly lit room, so setting the lowest value automatically makes the screen too dark to be comfortable in many environments, but then too bright for a really dark room. I don't know if this is an issue with the ROM software or a hardware limitation of the sensor. I've set my lowest auto setting to 40 which seems to work well, then I manually switch it to the dim value (20) if I'm in the dark.

Related

Brightness lower limit?

I was trying to lower the brightness very low to test how it would affect battery drain and it seems that the phone won't let 3rd party apps lower the brightness lower than what you can set it to, in the phone's settings. I tried an app called timerrific that lets you schedule various settings changes, but the phone seems to be overriding it. When I set the brightness to go down to 15% via the app, it does go very dim, but then immediately bounces back up to lowest level the phone's settings let's you set it at. Also, I had auto brightness off and the power saving mode off.
Has anyone been able to get the phone to go to very low brightness?

Thats a good question and would like the answer too... to me, the lowest brightness which must still HOG the battery as sometimes it seems to drain very fast with usage (and I have it on the lowest setting)... seems overly bright. I would without a doubt use it at a lower brightness to conserve energy depending on what I was doing at the time.

hey maybe its just the screen that makes it look bright

labbu63 said:
hey maybe its just the screen that makes it look bright
Click to expand...
Click to collapse
Not sure what you mean? For example, if I set the brightness to go down to 5% through the app Timeriffic, the screen will dim down to where I can barely see anything, but then it immediately raises back up to the lowest setting you can set in the phone's normal settings, which seems to me to be about 25-30%.

Yep
labbu63 said:
hey maybe its just the screen that makes it look bright
Click to expand...
Click to collapse
This is actually correct, the screen is what makes the "Automatic" brightness setting on the SGS phones look brighter than their LCD brethren. As we all know, currently all AMOLED displays use some kind of Pentile Matrix. All HTC devices (The N1 included) currently use RG:BG Pentile Matrix.
Do a google search on: "RGBG Pentile" and Samsung's site details it.
The SAMOLED display Samsung has made uses a new Pentile Matrix called RGBW:
Do a google search on: "nouvoyance" and it's the first site (sorry for the odd instructions, won't let new users post links )
Using the new RGBW, a white subpixel is introduced on top of the standard RGB stripe. From my reading, this allows the screen to achieve the same resolution to the eye with 33% less subpixels and is a brighter display in the process.

Asori said:
This is actually correct, the screen is what makes the "Automatic" brightness setting on the SGS phones look brighter than their LCD brethren. As we all know, currently all AMOLED displays use some kind of Pentile Matrix. All HTC devices (The N1 included) currently use RG:BG Pentile Matrix.
Do a google search on: "RGBG Pentile" and Samsung's site details it.
The SAMOLED display Samsung has made uses a new Pentile Matrix called RGBW:
Do a google search on: "nouvoyance" and it's the first site (sorry for the odd instructions, won't let new users post links )
Using the new RGBW, a white subpixel is introduced on top of the standard RGB stripe. From my reading, this allows the screen to achieve the same resolution to the eye with 33% less subpixels and is a brighter display in the process.
Click to expand...
Click to collapse
Good explanation, but are saying that no you can't dim it to low levels because it makes it look brighter than it is? If so, I don't buy it. I see it being dimmed to a low level. It just doesn't stay there.

Aldiko reader can get the screen even more dim
Sent from my SAMSUNG-SGH-I897 using XDA App

Also since there is less air gap in the new display, it is brighter.
Sent from my SAMSUNG-SGH-I897 using XDA App

This is just me speculating, but I'm thinking maybe the brightness setting is universal to android devices, except that it's calibrated to normal lcd. So the same voltage(or however they regulate the display brightness) on an LCD will look brighter on the Super AMOLED. For me, the dim setting on the auto-brightness seems too bright.

One thing I've noticed is I can take the brightness down to its lowest setting and it still seems bright..however on almost every phone I've used its like this.
The weird thing is on the Captivate I can open the browser, men then scroll down to settings and it has a brightness toggle there that takes it lower.

nbohmer said:
One thing I've noticed is I can take the brightness down to its lowest setting and it still seems bright..however on almost every phone I've used its like this.
The weird thing is on the Captivate I can open the browser, men then scroll down to settings and it has a brightness toggle there that takes it lower.
Click to expand...
Click to collapse
Yeah that does take it down lower than the home screen by a small amount. I put the browser brightness on the lowest setting and the global brightness on the lowest. Both auto brightness and power save are off. When I switch from the browser to the home screen, it brightens up a touch. So, it does go lower, but not all that much though, and it's only for the browser.

pjs2004 said:
Good explanation, but are saying that no you can't dim it to low levels because it makes it look brighter than it is? If so, I don't buy it. I see it being dimmed to a low level. It just doesn't stay there.
Click to expand...
Click to collapse
You can totally dim it more. In doing so, it will use even less power than an LCD screen at the same brightness setting.

Asori said:
You can totally dim it more. In doing so, it will use even less power than an LCD screen at the same brightness setting.
Click to expand...
Click to collapse
Yeah, that's what I thought was cool about this type of screen, but I still don't know how to to dim it below the the lowest setting in the phone's control panel (which isn't very low). 3rd party apps I've tried don't really work, or they work, but the phone immediately raises it back up. Are you saying you've dimmed it down to where you can barley see the screen, like 5-10 percent? That's what I'm looking for confirmation on. If so, what app did you use?

pjs2004 said:
Yeah, that's what I thought was cool about this type of screen, but I still don't know how to to dim it below the the lowest setting in the phone's control panel (which isn't very low). 3rd party apps I've tried don't really work, or they work, but the phone immediately raises it back up. Are you saying you've dimmed it down to where you can barley see the screen, like 5-10 percent? That's what I'm looking for confirmation on. If so, what app did you use?
Click to expand...
Click to collapse
I have used this app and seems to be pretty good, makes the brightness lower than system brightness.
http://www.androlib.com/android.application.com-curvefish-widgets-brightnesslevel-jDiB.aspx

i use brightness level too but the brightness goes back to the highest level when you plug the phone in and you cant use the presets on the widget anymore

sfernandez said:
I have used this app and seems to be pretty good, makes the brightness lower than system brightness.
http://www.androlib.com/android.application.com-curvefish-widgets-brightnesslevel-jDiB.aspx
Click to expand...
Click to collapse
I tried this app, and while it's a good app, it still doesn't make the screen go super dim. It looks to me like the lowest level (0%) is the same as lowest setting from the control panel. Zero percent should really be totally black.

Screen Filter
Here is your 100% working solution.
It doesn't work with the bright level, it applies a shade/filter to the screen. No matter what app you're using.
Set the bright to the lowest with your default system settings, because if you use a third party that goes below normal, with some apps like explorer, it set it to minimum allowed be system or whatever you set and then you will notice a setp up, shaded but a change.
I'm using it weeks ago and I found it's the best choice to suft the web at night. Also you can turn off softkeys lights
http://www.appbrain.com/app/screen-filter/com.haxor

flash speedmods new kernel.

Increase Screen Brightness beyond normal or "stock" values?

I really love my Inspire, especially w/ Honeyogen installed. But the problem of viewing the screen in direct sunlight is a major problem for me, one that I cant seem to find a soultion for.
Ive tried different screen covers & different ROMs & even different Kernals, yet the Inspires Slcd screen is still terrible in direct sunlight, as all I see is my reflection.
My question is this... is there anyway to hack the screen to increase the brightness beyond the "normal" or "stock" brightness levels?
I would think that if developers can hack volume levels for the external speaker & also freq values for overclocking the cpu, that the same could be possible for the screen brightness!?
Thanks, i appreciate your thoughts!

jaw2012 said:
I really love my Inspire, especially w/ Honeyogen installed. But the problem of viewing the screen in direct sunlight is a major problem for me, one that I cant seem to find a soultion for.
Ive tried different screen covers & different ROMs & even different Kernals, yet the Inspires Slcd screen is still terrible in direct sunlight, as all I see is my reflection.
My question is this... is there anyway to hack the screen to increase the brightness beyond the "normal" or "stock" brightness levels?
I would think that if developers can hack volume levels for the external speaker & also freq values for overclocking the cpu, that the same could be possible for the screen brightness!?
Thanks, i appreciate your thoughts!
Click to expand...
Click to collapse
Thank you for this question. I am interested in a solution to this as well.

is your screen on auto brightness? take it off and adjust yourself. it will adjust to light depending on how much and how little you get.

If your rom is cm7 base go to menu, settings,cyanogenmod settings,display, automatic backlight,scroll down to light levels,check use custom, other levels, (this is what I do) change 1st 3 screen profiles from 41 to 61, 61 to 81, 81 to 101, then hit save and apply. The higher the # the brighter the screen. Those settings are pretty good on battery and definitely helps on making the screen more viewable outside and in bright rooms. Hour this helps
Sent from my Inspire 4G using XDA App

Thanks for trying, but of course I've set my brightness levels myself. Auto-brightness doesn't do it for me.
I'm just surprised that there aren't hacks for screen brightness. Just as speakers levels & the CPU are governed to a certain threshold in stock configs, I would think the screen is governed and has much higher brightness levels it can go beyond.

evostevo1 said:
If your rom is cm7 base go to menu, settings,cyanogenmod settings,display, automatic backlight,scroll down to light levels,check use custom, other levels, (this is what I do) change 1st 3 screen profiles from 41 to 61, 61 to 81, 81 to 101, then hit save and apply. The higher the # the brighter the screen. Those settings are pretty good on battery and definitely helps on making the screen more viewable outside and in bright rooms. Hour this helps
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Yes, my ROM is CM7 based. But I assume these custom levels are for the Auto-Brightness mode?
Also, where exactly do I make these changes? Because the "screen" values are already at 41, 61, 81, 112 and so forth. So I assume these values have been changed by my ROM developer or are they CM7 defaults? Or do I have it all wrong? LOL. Thanks again.

daddioj said:
is your screen on auto brightness? take it off and adjust yourself. it will adjust to light depending on how much and how little you get.
Click to expand...
Click to collapse
Thanks for trying, but of course I've set my brightness levels myself. Auto-brightness doesn't do it for me.
I'm just surprised that there aren't hacks for screen brightness. Just as speakers levels & the CPU are governed to a certain threshold in stock configs, I would think the screen is governed and has much higher brightness levels it can go beyond.

Yes, this is for auto brightness. You do have the correct defaults. I bumped the first 3 profiles up by 20 and screen is brighter at lower levels.
Sent from my Inspire 4G using XDA App

also would like to know if there is any way to do this! bump!!!!

evostevo1 said:
Yes, this is for auto brightness. You do have the correct defaults. I bumped the first 3 profiles up by 20 and screen is brighter at lower levels.
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Ok, but my question is does this actually make the screen any brighter than the highest stock brightness level?
Or does this just change the values, so that the lower values are brighter, but no brighter than the stock highest level?

no brighter than brightest stock value
Sent from my Inspire 4G using XDA App

So why can you developers increase & hack the speaker and the CPU values and MAX out their potential, yet the screen's potential is wasted and we are stuck with dark screens that can't be seen very well outdoors?
It doesn't make sense to me. The screen backlight must have more potential, they don't push ANY hardware to it's max in stock configurations.
Come on developers, we need you again!

FALSE - juice defender's ultimate (maybe even pro) app can adjust it higher than the 100% brightness value. Only problem with this is that you have to let it control your brightness settings, but there's a bug that doesn't allow you to install apk's manually - so you have to disable the brightness while you install apks (or you could just install through adb lol). so yes, there is a way.
https://market.android.com/details?id=com.latedroid.ultimatejuice&feature=search_result

nhshah7 said:
FALSE - juice defender's ultimate (maybe even pro) app can adjust it higher than the 100% brightness value. Only problem with this is that you have to let it control your brightness settings, but there's a bug that doesn't allow you to install apk's manually - so you have to disable the brightness while you install apks (or you could just install through adb lol). so yes, there is a way.
https://market.android.com/details?id=com.latedroid.ultimatejuice&feature=search_result
Click to expand...
Click to collapse
Thanks! Didn't know this.
Sent from my Inspire 4G using XDA Premium App

nhshah7 said:
FALSE - juice defender's ultimate (maybe even pro) app can adjust it higher than the 100% brightness value. Only problem with this is that you have to let it control your brightness settings, but there's a bug that doesn't allow you to install apk's manually - so you have to disable the brightness while you install apks (or you could just install through adb lol). so yes, there is a way.
https://market.android.com/details?id=com.latedroid.ultimatejuice&feature=search_result
Click to expand...
Click to collapse
Um no Juicedefender does'nt raise the screen brightness ANY higher than you normally can w/ the stock brightness slider. All that does is mess with the Auto-Brightness settings.
Alot of people seem to get the Auto-Brightness settings confused with what I am asking. I want to be able to raise the brightness beyond the MANUAL brightness slider. If you raise the auto-brightness setting, your STILL limited to the max value that's on the manual brightness slider. I want THAT manual setting to be pushed beyond the normal "stock" value, which I guess is impossible......can't understand why when almost every other hardware is hacked to allow better performance.

jaw2012 said:
Um no Juicedefender does'nt raise the screen brightness ANY higher than you normally can w/ the stock brightness slider. All that does is mess with the Auto-Brightness settings.
Alot of people seem to get the Auto-Brightness settings confused with what I am asking. I want to be able to raise the brightness beyond the MANUAL brightness slider. If you raise the auto-brightness setting, your STILL limited to the max value that's on the manual brightness slider. I want THAT manual setting to be pushed beyond the normal "stock" value, which I guess is impossible......can't understand why when almost every other hardware is hacked to allow better performance.
Click to expand...
Click to collapse
Okay sorry just looked at juice defender again. It allows you to only change the shape of the brightness curve. As for forcing a brighter screen level I'm blank on that. Have you manually set it to 100% and its still. Not bright enough?
Sent from my Inspire 4G using XDA Premium App

You cant overclock the values of your android hardware "screen" for brightness and dimness since it can only work properly on a given threshold hence any more than that is negligible.

Screen dimming app.

If any of you other users out there feel that the whites on this thing are too awesome for super late at night like I do, I found a app when searching for a f.lux type alternative for android. I have been using this app to help ease the stress on my eye late at night. I dont know about the techical side of what it does, or any of the jargon involved, but it applies a filter of sorts to dim the screen further than what the phone allows. I been using it a lot lately and figure I would share with you guys. If anyone has any recommendations for other similar apps, please share.
Tl:dr
Screen Filter
https://play.google.com/store/apps/details?id=com.haxor
Sent from my SCH-I535 using Tapatalk 2

enomele said:
If any of you other users out there feel that the whites on this thing are too awesome for super late at night like I do, I found a app when searching for a f.lux type alternative for android. I have been using this app to help ease the stress on my eye late at night. I dont know about the techical side of what it does, or any of the jargon involved, but it applies a filter of sorts to dim the screen further than what the phone allows. I been using it a lot lately and figure I would share with you guys. If anyone has any recommendations for other similar apps, please share.
Tl:dr
Screen Filter
https://play.google.com/store/apps/details?id=com.haxor
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Or just turn on "Background Color" in Power Saving Settings.

Or if you want the screen brightness itself to be lower than what most ROMs allow, you can use this app called RootDim. It worked amazing on my xoom, not sure if it works on the SGSIII yet..
It requires root though..

yosterwp said:
Or if you want the screen brightness itself to be lower than what most ROMs allow, you can use this app called RootDim. It worked amazing on my xoom, not sure if it works on the SGSIII yet..
It requires root though..
Click to expand...
Click to collapse
Screen filter does the same and doesn't require root. On our AMOLED screens this can save battery.
Also you can turn off those damn capacitive key lights by going to Settings>display>"touch Key light duration"> Always off.

I can confirm that Root dim does work for the SGS3 I use it on my phone.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2

Lux is an amazing auto brightness app and setting it up for your tastes is incredibly simple.
Go out in the sun and turn brightness up all the way using the app then "link" that setting, go in complete darkness and set it to your taste and link it, then indoor lighting, set it, link it. It then uses just those 3 settings to create a smooth graph of brightness values that are all perfect. You can have as many links as you want but i find the less settings you put in that app the better.
I tried all the suggested ones in here btw.
Sent from my SCH-I535 using xda app-developers app

I've tried and really like Lux (in fact I'm considering purchasing it soon) but I've noticed two issues. First is that sometimes it will not refresh itself and I have to open up the lux dash to get the brightness to change. It doesn't happen often, but it happens often enough to be annoying, and I have it set to automatically.
Also, (and this may simply be an issue with the S3 and not lux itself) but sometimes I will be in a decently lit room and be at 1 lux, while lights out is 0. Not a lot of variance unless it's really bright outside. Have you found anyway to increase the light sensors sensitivity?

noingwhat said:
I've tried and really like Lux (in fact I'm considering purchasing it soon) but I've noticed two issues. First is that sometimes it will not refresh itself and I have to open up the lux dash to get the brightness to change. It doesn't happen often, but it happens often enough to be annoying, and I have it set to automatically.
Also, (and this may simply be an issue with the S3 and not lux itself) but sometimes I will be in a decently lit room and be at 1 lux, while lights out is 0. Not a lot of variance unless it's really bright outside. Have you found anyway to increase the light sensors sensitivity?
Click to expand...
Click to collapse
Try setting it to be always active in the task bar, that prevents it from being killed. Also try setting it to not use raw values for light sensor readings, this gives you a simple scale of 0-10 for readings and total darkness always reads as 0.
Edit: oops reread your post. That's weird that it is reading indoor light at 1. I usually get around 2 or 3. I used to have a screen protector on that covered the light sensor and that put it all over the place. Maybe that is what's causing it?

noingwhat said:
I've tried and really like Lux (in fact I'm considering purchasing it soon) but I've noticed two issues. First is that sometimes it will not refresh itself and I have to open up the lux dash to get the brightness to change. It doesn't happen often, but it happens often enough to be annoying, and I have it set to automatically.
Click to expand...
Click to collapse
I noticed the same behavior with the free version. In my case, the lowest value the HTC Desire S can reach with its default Android auto brightness is in fact about 15%.
In LUX settings you can configure the "0" value to be lower and "bypass" the freeware limitation (you can't configure sub-zero levels in the free version). This will work when you test it in the dashboard, but during regular use the light level never goes below the 15% limit already set by the OS.
What I did was purchase the full version (to get astronomer mode along with all the settings unlocked) so I was able to leave the 0 level at its default 15% but link some light intensity values to sub-zero percentages. Guess what? It works great! Once you go into a very dark room, the display dims as far as you set it to.
Another problem with the free version was that a few times I unlocked the phone outside in full sunlight and LUX did not increase the brightness. It appeared almost completely black because the light level was at about 15-25% (the same level it would be inside a low lit room).
Again, with the full version I did not notice this problem (I've used the free version for 1 day and the paid version for 1 day but running tests in different light levels inside and outside).
It's like the free version is a bit buggy on purpose, and I remember uninstalling LUX free about 2 months because of this; I was thinking that if the free version does not work OK, I shouldn't buy the full version. Apparently this is not the case (touch wood).
Just for the record, it's on "dynamically adjust".
noingwhat said:
Also, (and this may simply be an issue with the S3 and not lux itself) but sometimes I will be in a decently lit room and be at 1 lux, while lights out is 0. Not a lot of variance unless it's really bright outside. Have you found anyway to increase the light sensors sensitivity?
Click to expand...
Click to collapse
If the display is a bit dirty (oily, dusty, etc) around the light sensor, you can try to clean it. If this is not the case, open the dashboard, let it determine the light level or hit "auto" a few times and make sure the reading is correct. Then just slide your finger along the yellow line to find the appropriate brightness level and long press the chain to link. Go to a brighter lit room then go back to the first room and see how LUX behaves. Also lock/unlock the phone a few times and see how it goes.
If you still have problems running LUX, disable it and check the default Android auto brightness to make sure it's not a sensor issue.
LUX also has the possibility to set the response delay under Settings -> Advanced -> Developer Settings (the last to just on the bottom, but for this you would need to buy the full version.

Inginerul said:
If the display is a bit dirty (oily, dusty, etc) around the light sensor, you can try to clean it. If this is not the case, open the dashboard, let it determine the light level or hit "auto" a few times and make sure the reading is correct. Then just slide your finger along the yellow line to find the appropriate brightness level and long press the chain to link. Go to a brighter lit room then go back to the first room and see how LUX behaves. Also lock/unlock the phone a few times and see how it goes.
If you still have problems running LUX, disable it and check the default Android auto brightness to make sure it's not a sensor issue.
LUX also has the possibility to set the response delay under Settings -> Advanced -> Developer Settings (the last to just on the bottom, but for this you would need to buy the full version.
Click to expand...
Click to collapse
Thanks, but I think it is more of an issue of the sensor not being sensitive enough. I'm not sure if this is anything you can change in lux or if it would have to be edited in the kernel (or if it is fault of the hardware) but I just feel like the sensor doesn't go down low enough. As I said, I can get down to 1 or 0 in a decently lit room, and yes I have tried cleaning the screen. It's not like it jumps around or anything so it's not like I would notice anything in default auto brightness, it's just that it doesn't seem to be sensitive enough.

Screen filter is great!! I use as well!!!
Sent from my SCH-I535 using Tapatalk 2

Well for my Desire S, the lowest light level that the sensor can read is 160 lux (raw value). You can try and set LUX to use raw values because this is more accurate in my oppinion.

Another +1 for Screen filter here

Does anyone know how to use "luma" values for automatic adjustment in Lux instead of "lux" values?

noingwhat said:
Does anyone know how to use "luma" values for automatic adjustment in Lux instead of "lux" values?
Click to expand...
Click to collapse
What I have noticed on my phone is that "luma" readings are taken from the front facing camera, while "lux" readings are taken from the ambient light sensor (you can chose which one to use in the settings).
I suppose the front facing camera uses more battery than the light sensor; it also appears to be more sensitive because it can read more light levels.

Inginerul said:
What I have noticed on my phone is that "luma" readings are taken from the front facing camera, while "lux" readings are taken from the ambient light sensor (you can chose which one to use in the settings).
I suppose the front facing camera uses more battery than the light sensor; it also appears to be more sensitive because it can read more light levels.
Click to expand...
Click to collapse
I guess so. Thanks! But doesn't that kinda defeat the whole purpose of Lux? Because you can't use automatic mode with the camera(s).... so then what's it good for?

Well even if you don't have an ambient light sensor, you can still use the camera to check the light level when you unlock the phone and let LUX adjust the brightness level. Of course it's not dynamic but it's still better than having the brightness at 50% the whole time or changing brightness levels through a widget..

Fix adaptive brightness (windows rt/8)

I customized a luminosity curve for my surface rt, just edit the registry keys.
Download extract and run the attached .reg file and confirm the insertion of the Keys, then reboot the system.
Alert to make a backup of the old keys if you want to restore the previous state.
This change is compatible with all windows 8 but I have tested only on the surface.
Adaptive brightness varies proportionally to the user manual brightness, I suggest to manually adjust the brightness bar to about 20%, if you place the bar at 0 the brightness will be minimal with no automatic adaptation.
Appreciated thanks
New version v2
New improved version.
Try it and tell me if it's okay.
In the zip you will find the normal version and one with more brightness in the dark
I suggest to manually adjust the brightness bar to about 25%

So you have a fix, that's great. But to what? You didn't state what the problem is. Neither did you way what you are doing differently over the default values. Why would me, or anybody else for that matter, want do download this?

Amax said:
So you have a fix, that's great. But to what? You didn't state what the problem is. Neither did you way what you are doing differently over the default values. Why would me, or anybody else for that matter, want do download this?
Click to expand...
Click to collapse
In my surface the luminosity curve does not satisfy me.
The display seemed to have only three levels of brightness, setting an average value (ie on the desk in the room in the morning) adaptivity did not fit values for low-light (night) and lots of light, that is to say the brightness in the dark was not a minimum making it annoying for the view and unnecessary consumption of battery, instead with shaded light levels brightness became easily maximum, with again a waste of battery.
This forced me to move often the brightness bar manually, but now with my calibration does not touch more because it adapts automatically to any light condition.
Also the adaptation of brightness occurred after 3 seconds by the change of light, whereas now changes instantly in 0,1 seconds (100ms).

I like it a lot, just what I was looking for.
I use mostly in low light conditions my surface so it is very useful.
Just one remark: it is too sensitive so it is changing screen brightness very quickly even when I just touching the upper part of the screen and making a little shade on the light sensor...
So I think instead of 1 msec. would be better 3 msec.
Would you please and make a 3. version of the settings with 3 msec.?

Alapar said:
I like it a lot, just what I was looking for.
I use mostly in low light conditions my surface so it is very useful.
Just one remark: it is too sensitive so it is changing screen brightness very quickly even when I just touching the upper part of the screen and making a little shade on the light sensor...
So I think instead of 1 msec. would be better 3 msec.
Would you please and make a 3. version of the settings with 3 msec.?
Click to expand...
Click to collapse
100ms not 1ms! However, this file will change only the time in 300ms

antys86 said:
100ms not 1ms! However, this file will change only the time in 300ms
Click to expand...
Click to collapse
You are right, 100 ms. I was in a hurry. Thanks for the fast response and update

Your v2 seems to be working fine for me. Before applying it I could really tell when my surface was adjusting the screen, after applying it the transitions seems smoother and less abrupt.
I have been looking for documentation about how all of these things really work and the closest thing i could find was this link http://superuser.com/questions/644538/customize-adaptative-brightness-in-windows-8
but they seem to be using a different registry location than what you are and different registry names
regardless your settings seem to work immediately after restarting the sensor service

Minimum brightness too bright

Hello! Me and my wife both got this phone at the same time from the same place, but hers goes to a much lower minimum brightness than mine.
Does anyone know of a way to lower the minimum brightness?
EDIT: Okay, i did some poking around in ADB, found the "current brightness" file in /sys/class/leds/lcd_backlight0/brightness. Both phones report a brightness value of 65 when manually set to minimum brightness. The 65 sounds to me like they could go lower, is there any way to change the values used for the brightness slider? Or the automatic brightness curve.

Why not just use the screen filter app? I'm using it on every device to make screen real dark.
Skickat från min Nokia 3110i

Screen filter apps can't lower the backlight, which means they all ruin the screen contrast. They do work all right on OLED screens though since the blacks are already black.

It can be fixed with a buildprop edit, MAYBE

Here are some steps you can take to help fix your issue with the brightness.
Please restart your phone. If restarting your phone does not work, perform the following steps:
- Check if the light sensor works properly. If the light sensor is blocked, the screen brightness may become abnormal.
- By default, your phone automatically adjusts screen brightness according to the ambient brightness to bring you an optimal visual experience.
- If you need to adjust the screen brightness manually, turn off the function and manual adjust the brightness.
- If you think that the screen color temperature is too cool or warm, adjust the color temperature.
- If the screen has experienced an external shock, the internal LCD may have been damaged, resulting in abnormal screen brightness or color. Please back up important data and take the receipt issued with your phone to an authorized Huawei service center for repair.
Another option you can do is to purchase one of our third-party tempered screen protectors on Amazon. (NS)

Sure seems like this phone has so many bugs.
Sent from my SM-N900T using XDA-Developers mobile app

Database Info

welcome