I was messing with the boot fequency and trying to OC it... and i totally screwed it up... Its now in the boot screen but kept looping...
I tried to Factory reset it, but didnt work... I tried to flash it.. but the RSD Lite detected it as S Flash OMAP3630 and it won't let me press start...
I hv few solutions in mind, but im not sure if it will work...
1. Enable USB debugging mode withOUT booting into the system...
2. Access the root file without booting into the system...
3. Is there a safe mode for MS2?
Plzzzzz helpppp me
I'm sadly not all that great with recovering these phones but I can tell you that I had *exactly* the same problem and found that SBF was the solution. You may very well have the wrong version of the app which I sadly did at first and had the same problem.
The solution was to find and download RSD Lite v4.9 (or above) and that should recognize the milestone 2 and allow you to flash it properly! Here's a place you can find all of the SBF files for the MS2:
http://and-developers.com/sbf:milestone2
Hope that's helpful to you and you get your phone working again!
Edited: Also, you can download RSD Lite 4.9 from http://forum.gsmhosting.com/vbb/f166/rsd-lite-4-9-released-1106430/
Hello,
Do you just test to remove the battery at first ???
duplicated post....
Thanks for replying! But I have RSD 4.9 installed... I installed the Motorola driver (latest version as well) But the SBF can't detect the phone in sth like (AutophoneID) mode... But was detected in First-Come-First Serve Mode... as S Flash OMAP3630...
I tried to flash it by choosing the SBF in that [...] box, but [Start] box is still grayed out...
ignatius95 said:
Thanks for replying! But I have RSD 4.9 installed... I installed the Motorola driver (latest version as well) But the SBF can't detect the phone in sth like (AutophoneID) mode... But was detected in First-Come-First Serve Mode... as S Flash OMAP3630...
I tried to flash it by choosing the SBF in that [...] box, but [Start] box is still grayed out...
Click to expand...
Click to collapse
Did you start the Phone in bootloader mode (by turning the phone on while holding Camera + Volume Down buttons)?
I can finally flash it! I found out.. it's because of the Windows OS...
I used a 64-bit system at first... But it didn't work for somereason...
and then i tried a 32-bit system... then WALA! It WORKED! I can flash it now!
ignatius95 said:
I used a 64-bit system at first... But it didn't work for somereason...
Click to expand...
Click to collapse
My x64 OS worked, though...
ignatius95 said:
I can finally flash it! I found out.. it's because of the Windows OS...
I used a 64-bit system at first... But it didn't work for somereason...
and then i tried a 32-bit system... then WALA! It WORKED! I can flash it now!
Click to expand...
Click to collapse
axes90 said:
My x64 OS worked, though...
Click to expand...
Click to collapse
I always used RSDLite on x64 and it always worked.
ignatius95 said:
Thanks for replying! But I have RSD 4.9 installed... I installed the Motorola driver (latest version as well) But the SBF can't detect the phone in sth like (AutophoneID) mode... But was detected in First-Come-First Serve Mode... as S Flash OMAP3630...
I tried to flash it by choosing the SBF in that [...] box, but [Start] box is still grayed out...
Click to expand...
Click to collapse
Hi i have the same problem few days now.
Downloaded RSD 9 Lite
Moto drivers 4.8.0
I can see my phone on RSD have downloaded most of the SBF files to flash
some actually strted to flash image file and the came with fail message
My phone is a A953
I wonder if there is a way to have a update image to flash from SD
If anyone has any ideas i am wiling to follow
ignatius95 said:
I can finally flash it! I found out.. it's because of the Windows OS...
I used a 64-bit system at first... But it didn't work for somereason...
and then i tried a 32-bit system... then WALA! It WORKED! I can flash it now!
Click to expand...
Click to collapse
What file did you use to flash it?
Can you please give some more info?
I have tried everything and nothing happens.
gc62 said:
What file did you use to flash it?
Can you please give some more info?
I have tried everything and nothing happens.
Click to expand...
Click to collapse
You know ive posted a guide before right?.. (Im using Win7 x64.. and theres no problem at all) try following this.. maybe it works then-> http://forum.xda-developers.com/showthread.php?t=998624
Related
I broke my phone.
I had a Spanish 2.1 defy rooted, and I wanted 2.2 so I installed System recovery and downloaded the UK Blur froyo rom. I installed and everything in the process went well, but I ended up stuck in the Motorola logo. What can I do or flash to the phone? please help me.
I knew stuff about android with my XT720 and Milestone but this phone is really different.
Update: I can't use any firmware either! When I try to flash it says ''failed, unable to charge ini files'' but this was happening even before I restored a backup
Please help me!
if you flashed a 2.2 ROM via RSD Lite, you cant get back to 2.1
go into the RecoveryMode volumedown+power and do a fullwipe (data+cache).
Restart. if that didn't work, than flash another 2.2 ROM with RSD Lite, which must be no older than that one, which you flashed first.
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )
Dodge93 said:
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )
Click to expand...
Click to collapse
I'll try. but everytime I press start on rsd lite it says ''fail''
mtvdeo said:
I'll try. but everytime I press start on rsd lite it says ''fail''
Click to expand...
Click to collapse
I tried but nothing:
''Failed flashing process. Unable to retrive initialization values from INI file (0x729)...Phone connected''
what can I do!??
I tried with this:
JRDNEM_U3_2.59.0_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANOPTUS_P025_A022_M002_HWp3_Service1FF
please, what can i do?
try renaming the file to make it shorter
Peglezn said:
try renaming the file to make it shorter
Click to expand...
Click to collapse
what would that change?
it didn't still the same
so this is the end for my defy?
I'm desperate, please help me
Rsd Lite will give me that error with every firmware I try.
Recovery mode turns on but what can I do?
Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?
edition- said:
Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?
Click to expand...
Click to collapse
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.
mtvdeo said:
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.
Click to expand...
Click to collapse
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine
do u have the defy drivers installed?
zencoran said:
do u have the defy drivers installed?
Click to expand...
Click to collapse
The problem is that he was using RSDLite version 4.6, he needs to use 4.9 to work.
edition- said:
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine
Click to expand...
Click to collapse
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)
mtvdeo said:
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)
Click to expand...
Click to collapse
Uninstall all versions of RSDLite that you have, this is 4.9, i'm using it.
Then reinstall again, make sure you have the latest drivers : http://developer.motorola.com/docstools/USB_Drivers/Handset_USB_Driver/?pubid=987654
It's working now, but something wird happened. instead of opening flash image, it just started saying ''flashing phone''.
I guess it's just a mistake.
question, after this 2.1 I flashed and if it works, can I flsh a 2.2 firmware?
which one (with blur)?
thanks again.
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
That one doesn't have BLUR as you can see in the name, and i think there are problems flashing directly after 2.21, many people had to go thru 2.51, did you wiped after flash?
mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
Didn't noticed you were from Uruguay, since that is a EU ROM you will have to flash one of this fixes : http://forum.xda-developers.com/showthread.php?t=944258
The "Argentina" one should be fine.
HI..
My tab is stuck in BOOTLOOP..
I've already tried to reflash the cwm 10 and wipe cache several times.
and wipe data(which i cannot do, because it automatically reboot again)
i tried pressing the power button and volume down" and press continue..
now, my phone is in downloading process.. i have no idea what am i downloading now..
PLEASE HELP!!
THXX
This might help you: http://forum.xda-developers.com/showpost.php?p=30645468&postcount=1140
help
s4kura88 said:
HI..
My tab is stuck in BOOTLOOP..
I've already tried to reflash the cwm 10 and wipe cache several times.
and wipe data(which i cannot do, because it automatically reboot again)
i tried pressing the power button and volume down" and press continue..
now, my phone is in downloading process.. i have no idea what am i downloading now..
PLEASE HELP!!
THXX
Click to expand...
Click to collapse
same issue here, i did some mistakes like you did too... tried reflashing stock roms from sammobile from stock HC to ICS.. but no luck.. got my tab plus GT P6200 is now in bootloop.. saw someone fixed his bootloop by using odin thru using .pit file, csc, bootloader, pda and repartition checked... i wanted to try it but i cant find my tab's bootloader and csc files... if anyone knows where can i get those files, i badly needed your help too... thanks in advance...
Just make sure it's not just a corrupted data partition first before doing something as drastic as repartition.
re
rendler said:
Just make sure it's not just a corrupted data partition first before doing something as drastic as repartition.
Click to expand...
Click to collapse
how will i know if i got more problem than corrupted partition? any signs or can u site a lil more examples bout it sir?
zepoy said:
how will i know if i got more problem than corrupted partition? any signs or can u site a lil more examples bout it sir?
Click to expand...
Click to collapse
You'll know that it's more than a corrupted partition when running disk scan/fix (using e2fsck from an adb shell through recovery) and then afterwards flashing the rom again doesn't work.
zepoy said:
same issue here, i did some mistakes like you did too... tried reflashing stock roms from sammobile from stock HC to ICS.. but no luck.. got my tab plus GT P6200 is now in bootloop.. saw someone fixed his bootloop by using odin thru using .pit file, csc, bootloader, pda and repartition checked... i wanted to try it but i cant find my tab's bootloader and csc files... if anyone knows where can i get those files, i badly needed your help too... thanks in advance...
Click to expand...
Click to collapse
U know when u wipe data via stock recovery on ICS.....that will make ur device hardbrick..but if u wipe via CWM, then its safe..
Sent from my GT-P6200 using xda premium
Member90 said:
U know when u wipe data via stock recovery on ICS.....that will make ur device hardbrick..but if u wipe via CWM, then its safe..
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
i believe thats the biggest mistake i did when i try to flash cm10 on my device... i forgot to use cwm recovery when i wipe data/factory reset... from what i remembered i only use cwm when i flashed cm10... can anyone give me some advice to make things work again
rendler said:
This might help you: http://forum.xda-developers.com/showpost.php?p=30645468&postcount=1140
Click to expand...
Click to collapse
zepoy said:
same issue here, i did some mistakes like you did too... tried reflashing stock roms from sammobile from stock HC to ICS.. but no luck.. got my tab plus GT P6200 is now in bootloop.. saw someone fixed his bootloop by using odin thru using .pit file, csc, bootloader, pda and repartition checked... i wanted to try it but i cant find my tab's bootloader and csc files... if anyone knows where can i get those files, i badly needed your help too... thanks in advance...
Click to expand...
Click to collapse
rendler said:
Just make sure it's not just a corrupted data partition first before doing something as drastic as repartition.
Click to expand...
Click to collapse
i really don't understand about ADB..
i haven't installed all that stuff before..
how to know that it is just corrupted data partition??
Try Heimdall?
What method did you use? You tried flashing CWM 6.01.0 and then flashing CM 10? what version and what build? Maybe you want to flash another build in case it's just a problem in certain build?
I did mine using Heimdall, Give this a go
http://forum.xda-developers.com/showthread.php?t=1517934
for windows you can find the step here http://forum.xda-developers.com/showpost.php?p=29104577&postcount=29
Take a deep breath, read the instruction once again and then try, Good luck!
Unitedforlife said:
What method did you use? You tried flashing CWM 6.01.0 and then flashing CM 10? what version and what build? Maybe you want to flash another build in case it's just a problem in certain build?
I did mine using Heimdall, Give this a go
http://forum.xda-developers.com/showthread.php?t=1517934
for windows you can find the step here http://forum.xda-developers.com/showpost.php?p=29104577&postcount=29
Take a deep breath, read the instruction once again and then try, Good luck!
Click to expand...
Click to collapse
hmm
i use the CM 10 30Sept build using the CM Recovery (the one, that i press power and volume up button)
then i try wipe cache, install the CM10.. but it doesn't work..
yeah.. i thought if i reinstall maybe it will work ><
okay.. will try now thx a lot
s4kura88 said:
i really don't understand about ADB..
i haven't installed all that stuff before..
how to know that it is just corrupted data partition??
Click to expand...
Click to collapse
ADB (Android Debug Bridge) comes with the Android SDK. Basically you boot the device into CWM recovery then connect the device to a computer using a USB cable and run the command 'adb shell' which will then give you a shell prompt where you can send commands directly to be run on the device.
If you're getting reboots from trying to wipe certain partitions repeatedly from CWM then that's a pretty strong indication that you have a corrupted partition.
Unitedforlife said:
What method did you use? You tried flashing CWM 6.01.0 and then flashing CM 10? what version and what build? Maybe you want to flash another build in case it's just a problem in certain build?
I did mine using Heimdall, Give this a go
http://forum.xda-developers.com/showthread.php?t=1517934
for windows you can find the step here http://forum.xda-developers.com/showpost.php?p=29104577&postcount=29
Take a deep breath, read the instruction once again and then try, Good luck!
Click to expand...
Click to collapse
I've tried Heimdall..
but i got this
ERROR: Failed to access device. libusb error: -12
any suggestion?
rendler said:
ADB (Android Debug Bridge) comes with the Android SDK. Basically you boot the device into CWM recovery then connect the device to a computer using a USB cable and run the command 'adb shell' which will then give you a shell prompt where you can send commands directly to be run on the device.
If you're getting reboots from trying to wipe certain partitions repeatedly from CWM then that's a pretty strong indication that you have a corrupted partition.
Click to expand...
Click to collapse
I've tried this, but i'm really confused.. i've already installed adb and adb shell..
how to write this?
umount /cache
e2fsck -cy /dev/block/emmcblk0p7
e2fsck -cy /dev/block/emmcblk0p9
e2fsck -cy /dev/block/emmcblk0p10
do i need to put, ....\adb shell<umount /cache> or something?
thx a LOT!!:laugh::laugh:
What OS are you running? Windows? do make sure you follow the README and install the drivers to your computer.
4. Install the driver using zadig.exe as noted in the readme. BUT for me, P6200 usb driver is stated as Gadget Serial in the list. (not samsung usb composite)
Unitedforlife said:
What OS are you running? Windows? do make sure you follow the README and install the drivers to your computer.
4. Install the driver using zadig.exe as noted in the readme. BUT for me, P6200 usb driver is stated as Gadget Serial in the list. (not samsung usb composite)
Click to expand...
Click to collapse
i use windows..
yuppp.. i've already tried that..
the flash is working.. after finish flashing... it is bootloop again..
now, it appear samsung logo over and over again ><
never mind..
i tried wipe data and cache and it WORKS!!!
THX A LOTTTT!!!
zepoy said:
i believe thats the biggest mistake i did when i try to flash cm10 on my device... i forgot to use cwm recovery when i wipe data/factory reset... from what i remembered i only use cwm when i flashed cm10... can anyone give me some advice to make things work again
Click to expand...
Click to collapse
read this
http://forum.xda-developers.com/showthread.php?t=1517934
hope you find a solution.
---------- Post added at 10:18 PM ---------- Previous post was at 09:20 PM ----------
s4kura88 said:
i use windows..
yuppp.. i've already tried that..
the flash is working.. after finish flashing... it is bootloop again..
now, it appear samsung logo over and over again ><
never mind..
i tried wipe data and cache and it WORKS!!!
THX A LOTTTT!!!
Click to expand...
Click to collapse
great! sometimes simple re wipe and re flashing did the trick.
Hello
Im unable to boot into recovery (Im using this one http://forum.xda-developers.com/showthread.php?t=2695377) . It just shows the TWRP logo :crying: .
Im using this rom at the moment http://forum.xda-developers.com/showthread.php?t=2375229 . I can boot the rom without any problem.
I want to reflash that same recovery or another, but I cant make the fasboot work on windows 8.1. Already tried to flash through terminal emulator, but no luck:crying: .
If theres no fix, Ill have to install windows 7
app method
Schematic said:
Hello
Im unable to boot into recovery (Im using this one http://forum.xda-developers.com/showthread.php?t=2695377) . It just shows the TWRP logo :crying: .
Im using this rom at the moment http://forum.xda-developers.com/showthread.php?t=2375229 . I can boot the rom without any problem.
I want to reflash that same recovery or another, but I cant make the fasboot work on windows 8.1. Already tried to flash through terminal emulator, but no luck:crying: .
If theres no fix, Ill have to install windows 7
Click to expand...
Click to collapse
install this app and follow the instructions
ULTIMATESAM said:
install this app and follow the instructions
Click to expand...
Click to collapse
:crying: Doenst work. I need to find a method to flash through fastboot in windows 8.1.
EDIT: I think that is more like virus than a recovery flasher.
pc suite??
are you using latest HTC sync manager????.old one dosent work for me when i switch from windows7 to 8.
ULTIMATESAM said:
are you using latest HTC sync manager????.old one dosent work for me when i switch from windows7 to 8.
Click to expand...
Click to collapse
Yes, Im using latest htc sync from here http://www.htc.com/pt/software/htc-sync-manager/ (v3.1.24.5)
:crying: I think I have the nand recovery partition burned as it is mentioned here http://forum.xda-developers.com/showpost.php?p=53150842&postcount=10
But I cant do anything in windows 8.1
Edit1: If i choose the HTC Sync manager in connection type, It comes with a 784 KB disc that windows always wants to format.
It also comes with a blank CD virtual drive.
Edit2: And no, HTC sync manager doesnt detect the phone.
final option...
try this
http://www.andromods.com/fix-troubleshoot/issue-fastboot-waiting-for-device-windows-81-fixed.html
if this dosen't work then don't know ....:fingers-crossed:
hit thanks if helped
ULTIMATESAM said:
try this
http://www.andromods.com/fix-troubleshoot/issue-fastboot-waiting-for-device-windows-81-fixed.html
if this dosen't work then don't know ....:fingers-crossed:
hit thanks if helped
Click to expand...
Click to collapse
I've already tried that method before, theres also a comment on that page saying it doesnt work
Ok Ive went back to windows 7 and now I can flash other recoverys:good:
But I still cant flash a TWRP recovery:crying:, and Im not understanding the proccedure to fix the nand burn recovery partition from this post http://forum.xda-developers.com/showpost.php?p=53150842&postcount=10
Is this method also for the same issue? http://forum.xda-developers.com/showthread.php?t=2389445
Edit: :laugh: Yeah, finally made it, flashed the TWRP recovery successfully. Hope it doenst get burned again in future :fingers-crossed:
Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
lucki1000 said:
Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
Click to expand...
Click to collapse
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
xdadeem said:
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
Click to expand...
Click to collapse
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
lucki1000 said:
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
Click to expand...
Click to collapse
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
xdadeem said:
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
lucki1000 said:
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
Click to expand...
Click to collapse
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
xdadeem said:
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
Click to expand...
Click to collapse
You can make dual boot on your Computer, and then you can use the tool.
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Sorry... now I got a windows computer but the rom is modded so it wont allow anything work... no engineering mode works... the code doesnt and not even mobileuncle tools work
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Ok I bricked it now
xdadeem said:
Ok I bricked it now
Click to expand...
Click to collapse
Flash it wirh sp flash tool this can unbrick.
lucki1000 said:
Flash it wirh sp flash tool this can unbrick.
Click to expand...
Click to collapse
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
xdadeem said:
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
Click to expand...
Click to collapse
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
lucki1000 said:
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
Click to expand...
Click to collapse
This is my situation... cant even flash with sp flashtool anymore
xdadeem said:
This is my situation... cant even flash with sp flashtool anymore
Click to expand...
Click to collapse
Have you try another cable?
lucki1000 said:
Have you try another cable?
Click to expand...
Click to collapse
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
xdadeem said:
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
Click to expand...
Click to collapse
So you try another cable?
lucki1000 said:
So you try another cable?
Click to expand...
Click to collapse
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
xdadeem said:
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
Click to expand...
Click to collapse
You can try to Format only the whole Phone like bootloader and then Format and Download again.
lucki1000 said:
You can try to Format only the whole Phone like bootloader and then Format and Download again.
Click to expand...
Click to collapse
What does this message mean? after 35 minutes
xdadeem said:
What does this message mean? after 35 minutes
Click to expand...
Click to collapse
Did you can try it with windows? Or try only Download and manually format it with the tab format.
or you use from another source but it should be the same https://docs.google.com/uc?id=0By4_z1Byo7UKYUh1Y1FQY3NrUjQ&export=download.
It is maybe a distro problem can you tell me which distro you are using?
I have it tested 10 minutes ago by me it works fine.
Hey. I installed a custom rom and now I want to go back to miui. I flashed with miflash without lock and now the phone shows the poco logo then turns off and on again. What do I do? Flashing a custom rom works but I don't want a custom rom. I'm scared to clean all and lock in case it gets hardbricked.
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
allianzcred said:
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
Click to expand...
Click to collapse
I tried to flash from miflash multiple times but it doesn't work. However, when I flash the recovery rom from twrp it boots fine.
On CMD the phone is recognized as an adb devices?
allianzcred said:
On CMD the phone is recognized as an adb devices?
Click to expand...
Click to collapse
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
strongbench said:
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
Click to expand...
Click to collapse
Send screen shots to see what is wrong.
allianzcred said:
Send screen shots to see what is wrong.
Click to expand...
Click to collapse
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
strongbench said:
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
Click to expand...
Click to collapse
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
allianzcred said:
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
Click to expand...
Click to collapse
Yes it has an amd processor
strongbench said:
Yes it has an amd processor
Click to expand...
Click to collapse
You need to install the drivers in secure mode let my try to find a tutorial
allianzcred said:
You need to install the drivers in secure mode let my try to find a tutorial
Click to expand...
Click to collapse
Found anything?
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Then reinstall abd and all the drivers that you need.
allianzcred said:
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Click to expand...
Click to collapse
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
strongbench said:
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
Click to expand...
Click to collapse
Stay unlocked men
try it on intel (if you can)... i got the same issue but in a intel pc it works great
allianzcred said:
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
Click to expand...
Click to collapse
I've decided to keep xiaomi.eu since it feels smoother than stock miui. However, I'll keep what you said in mind for future flashes.