i dont know what im doing wrong but last week i could install gingerbread with no issues other than the market. because of the market issue i use NVflash to go back to square 1 and start over. so i installed VEGAn 5.1.1 with no problems. after about a day i was reading up on other gingerbread roms so i went to try one and it would install but never finish booting. so i nandroid back to were i was and try the rom i had before with the market issues, that one didnt work either.
what am i missing?
ps i cant get logcat to read any farther than from recovery.
in recovery logcat says "/sbin/sh: logcat: not found"
[solved] got it ^.^
ok dont know what the [email protected]# i did but i got it working.
for any of you that care on how it started working its going to be a long post.
basically on my quest to fix this damn thing i decided to use nvflash which didnt work the first 5 times, so i used the original recovery image rather than the rooted one. that semi-bricked it so it would only boot into APX mode. so after an hour of searching XDA i just flashed the enhanced image (like in the guide on the dev forum) and holy crap it worked and installed VEGAn 7 without updating.
dont know how it fixed it but it did.
Mods can you please delete this thread
Hi everyone,
I'm sorry I'm quite new to this, and I'm afraid I've gotten myself somewhat stuck with my Nexus S. Yesterday I managed to root it, install superuser, as well as clockwork mod. Today I wanted to try a new rom and after some attempts, it seems I no longer have any working roms on my phone. After much searching with no luck, I turn to you guys for your expertise.
So I am able to see fast boot upon pressing the volume up and power buttons, and am certainly able to choose recovery and get into clockwork mod. Within clockwork mod I can mount USB storage, so I can transfer roms to the internal SD card. I've tried 3 or 4 roms, some say they install correctly, others not, and after trying to boot after any installation I simply get stuck at the google screen with the lock image at the bottom. The only things I have "deleted" is wiped the data and cache. I have no idea, but I think I may have erased the bootloader image or something else that I should not have that is required.
I have a i9020a model (non-4g model I believe), can you pleeeeeeeeeeeeeaaaassee help me!! I just want to get back to gingerbread 2.3.6, and my phone back up and running the way it was. I've become quite nervous after some searching with some saying a resistor mod is needed on the hardware!!
Your okay cause you can get into fastboot and recovery so don't worry. Maybe the rom you downloaded is not for your phone. Did you make a nandroid backup before flashing the rom? If yes then go into backup and restore from clockwork recovery to go back to stock.
Sent from my A500 using Tapatalk
If you can get to recovery, just flash the stock image FOR YOUR PHONE. Then you can go through and reroot..don't worry, you'll get the hang of it.
Sent from my Nexus S using Tapatalk
So my phone is not "bricked" as they say?? I'm not in big trouble?
I did not make a nandroid backup What kind of image am I looking for and how do I install it on the phone? I know my phone is of the variant i9020a, but how am unsure of how much more specific I should be looking for.
Looking at the following post: http://forum.xda-developers.com/showthread.php?t=1063664.
Should I try installing the Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader option?
Choose the latest 9020a version of the FULL ROM, which is what you have already have eyes on.
I've tried installing the file I mentioned above, but I get a status 7 error when trying to install, and the install is aborted.
Could I get some more assistance please? Can anyone point me to a correct, full rom? Or perhaps I'm installing it incorrectly, could someone be so kind to outline the correct steps to a proper install?
Edit: I think the above mentioned file is for a GSM model, I'm sure I have the CDMA version.
Also, somewhat good news. I managed to install the oxygen rom, but for the 4g version and installed fine with no errors, but I have no service. What does this indicate, as I still want to restore back to a factory version (non-4g) of gingerbread 2.3.6.
What CWM version do you have? Is it 3.0.0.0?
Also, if you have no service, it's likely that you downloaded a ROM with an incorrect radio.
Edit:
If you have CWM 3.0.0.0, make sure to download the latest version, found in this thread: http://forum.xda-developers.com/showthread.php?t=988686 (use 5023-cyan.img). You flash this the same way you did CWM previously, though in the terminal make sure you type out the 5023-cyan.img file name.
Next, download the stock ROM from this thread: http://forum.xda-developers.com/showthread.php?t=1063664. Simply look for your phone version, and you'll find the correct software variant.
Maybe you've fixed your phone already; if not, I hope this helps!
I wish you the best of luck. Oh, and through problems like these, you come to learn a lot more about your phone. That's what I've found, at least.
At the thread you mentioned above there is a version with a different radio, you might want to give that one a try.
You also said that you only wiped data and cache, so maybe you should do a full wipe before. Not doing that can sometimes lead to problems.
Sent from my Nexus S using XDA App
To be brief, the phone is up and running as brand new! Thank you so very much everyone. It seems the error was with CWM, as I was able to install and boot a 4g oxygen rom on my phone, I went into rom manager, and at the bottom of the list was an option to upgrade to 5.x. Installed the CWM update, wiped everything and was able to install the factory rom, no issues, and everything works just as I remember
I have most certainly learned more about my phone, and I am going to look at it as a rather stressful learning experience rather than a mistake on my part.
But a sincere thanks to everyone once again, I posted this at like 4am here and had a response within a few minutes, I was pulling my hair out haha!
Flashing to stock rom will help you out. You can get stock roms from Internet simply by searching in Google...
Sent from my Nexus S using XDA App
Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin
I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn
Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021
Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997
I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.
went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium
So I have been bouncing back and fourth between jellywiz and my stock nandroid (whatever the latest JW on the weekend and stock so I know I have no issues during work week)
Just getting ready to crash and I pick up my phone and clockwork is running and trying to flash something and keeps repeatedly failing... WTF?? Last I had touched it was about an hour ago and was playing amazons FAOTD from 2 days ago. Nothing else.. didnt hit anything, touch anything, just sitting there plugged in.
So I mash the no button on clockwork becasue its asking me if I want to try flashing again, and reset the phone. When it powers back on and fully boots up it tells me software update failed (much like an OTA message)
Everything else seems fine, but im just curious as to OTA or WTF becuase I have never had a phone that booted into clockwork by itself and attempt to flash something.
Yes, there is.....
Here is one of a few threads: http://forum.xda-developers.com/showthread.php?t=1887081
Check the General section.....
I got my one SV k2_cl from boost a little over a month ago and got the bootloader unlocked and rooted, working fine until one morning it wouldn'tmake calls or texts. I tried to factory reset and when I tried to boot got stuck at the HTC logo. Took me 2 weeks to get it to even flash a Rom on here that will somewhat work. I've got WiFi and partial 3g 4g connectivity but no voice at all. When I try to use the phones its activation tool-error, tried manually programming phone- nothing. I'm stumped. Can someone please help me out here. Don't want to have to buy another phone if I can help it. The only guess I've got at the moment is that if I could get a stock original rom to flash I'd be good to go probably and just hold out on doing anything else to it until after the kitkat ota is launched. The few stock roms I've tried either wouldn't download for some reason or just won't flash right. Thanks in advance for any help guys. I've always been more of a hardware geek more so than software but I can usually muddle through following guides of course.
I'm not much into boost, but did you try to flash the available RUU?
help...
As a matter of fact I have tried that and unfortunetly the installer locked up on a reboot of the phone because the phone wants to do the "Android is upgrading # of #" on every boot. That was why I was thinking since adb/fastboot and the HTC One Toolkit all sorta work that if I could get ahold of a working stock rom to flash on there and I have a stock CWM backup still on my laptop from when I first got the phone rooted and everything working. But of course thanks for the tip anyway. I wish that would work. It seems to be the easiest way to install back to stock.