I was Upgrade my Imate-jam with Rom 2.03 TX WWE
But There are lot of bugs in this rom
so now i want to down grade my jam to its previous state but when i enter in bootloader mode Screen shows that
Serial
V 1.00
I plug my usb cable to jam but Serial didnot convert in USB some one told me to downgrade the rom through SD Card
I have 1 GB Kingston mini SD card but now what i have to do now nobody help out me to this trouble i tries lot of searches but invain.
Now i am getting in trouble with my jam kindly some body guide me whole process with files support because i have no files regarding Rom upgrading/Downgrading through SD Card
Thanks a lot..
Hassam Moin
[email protected]
[email protected]
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks
Hi! I want to buy memory card microSD 8 GB with adapter for my QTEK 9100. Did it work fine with my PDA? I found this thread(in download is this "SDHC Support Kit hurricane and QTEK9100.cab"): http://forum.xda-developers.com/showthread.php?t=344338 but I don't know if this is true. Maybe sombody tried this method? Thanks for answering.
dear friends
i have a big problem with my micromax w900 mobile , recently i upgrade it from 6.1 to 6.5but after upgrade phone working fine but micro sd card not show in micromax w 900 after upgrade rom6.1 to 6.5 ..http://media.xda-developers.com/images/smilies/frown.gif
please help me on this matter , i replace my card also but it never show in file explore .
Yesterday I've flashed my hd2 with custom rom...
Since then my microsd card is not detected either...
If I connect hd2 to the pc I get "disk drive" option but nothing more than that...
Connection device with usb and without card does not give me that option...so the device obviously detects card but cant access it...
Micromax W900 upgrade to windows 6.5 SD problem
I am getting the same problem after getting the phone OS upgraded at Service centre. I like the interface so much that I do not want to switch back to 6.1.
Have you got the solution yet.
Regards
Pankaj
Hey people, I have a question
First, I am using HTC Touch Diamond running XDAndroid 2.2 and WinMo 6.5 Pro BsB Ultimate WWE ROM
OK so here is the problem:
One day i decided to take a look at the setting...
and i unmounted my SD Card without knowing how to mount it again!
So, can you help me with that please?
Any help will be appreciated very much!
dancivuk said:
Hey people, I have a question
First, I am using HTC Touch Diamond running XDAndroid 2.2 and WinMo 6.5 Pro BsB Ultimate WWE ROM
OK so here is the problem:
One day i decided to take a look at the setting...
and i unmounted my SD Card without knowing how to mount it again!
So, can you help me with that please?
Any help will be appreciated very much!
Click to expand...
Click to collapse
Turn off your phone and remove the SD card. Turn your phone back on, without the SD card inserted (leave the battery cover off). Insert the SD card while the phone is working after it has booted into Windows. Your card should be detected and mounted automatically.
Post here again if you need more help!