Has anyone been able to get this working with Root? I install fine, enter my pin and it goes through but since I have root it doesnt sync. Im running liberty, any suggestions
matt1313 said:
Has anyone been able to get this working with Root? I install fine, enter my pin and it goes through but since I have root it doesnt sync. Im running liberty, any suggestions
Click to expand...
Click to collapse
Checking for root is configurable by your IT area. My account is not setup to check for root but I have had other problems. Can you easily unroot and reroot your device so Good would work except for the rare times that you actually need root? One problem I have had is the initial setup would never complete (stops at retrieving policies) unless I go back to stock eclair, get it working and back it up via Titanium backup, then upgrade to Froyo or GB, and then restore it. Mine continues to work via root though. The other problem I have had is if I ever restore to an earlier state (using the same PIN), it will stop syncing. I need a new PIN issued to get it working again.
I'm reading that IT admins can lock your phone camera, wipe SD card, etc.
What other kinds of things can they do once "Good for Enterprise" is installed on your personal phone?
Nate2 said:
I'm reading that IT admins can lock your phone camera, wipe SD card, etc.
What other kinds of things can they do once "Good for Enterprise" is installed on your personal phone?
Click to expand...
Click to collapse
I was involved in piloting "Good for Enterprise" for my company. I do know that the possible "controls" vary depending on the platform. Good for Enterprise on the IPhone will have much more control because the devices (hardware) and OS are very limited compared to Android. Keep that in mind as you read some of these items if they don't mention which platform. Also, the Good application would have to be granted root access to your phone "I believe" in order to do any of the items you mentioned. If you are running a custom ROM and have the "SuperUser" app, you would see if it had that access. I "think" it will be very hard for Good to implement some of those controls unless the Android OS provides an API for it because the underlying hardware can vary so much. I'm not a developer but I think that is correct.
Also, if you work for any decent sized company, they will be very concerned about the legal aspects of company provided software deleting (or even reading) personal information outside the "Good container". I mention the word container because Good provides encryption of everything within the app so it can not be read by anything outside the app (such as root explorer). I have successfully backed up and restored the encrypted data to another ROM but it is just bits to Titanium Backup or anything else. Feel free to PM me if you have any other questions on it that I might be able to answer. I know the admin for Good for our company that I could ask other questions.
I'm reading that the installation can detect jailbroken iPhones and rooted Android devices, and if the IT admins decide, they can configure it to refuse installation on such devices to prevent compromising Good's security/integrity of its resources.
(I'm not rooted, and don't plan to root my DroidX, so it is a moot point for me)
I heard from Verizon that IT admins can remotely control hardware components, including cameras, Bluetooth and IR ports, SD Cards, and more.
Things I'd like to know... can IT admins:
Track/monitor internet usage on the device?
Track/monitor GPS usage?
Copy non-Good related resources (e.g. files) from the device or SD card?
Lock the device?
Locate the device?
Wipe non-Good related resources?
Does the Good app send device System Logs to the IT folks?
Phone call logs?
App Permissions:
YOUR ACCOUNTS
ACT AS AN ACCOUNT AUTHENTICATOR Allows an application to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
MANAGE THE ACCOUNTS LIST Allows an application to perform operations like adding, and removing accounts and deleting their password.
SERVICES THAT COST YOU MONEY
DIRECTLY CALL PHONE NUMBERS Allows the application to call phone numbers without your intervention. Malicious applications may cause unexpected calls on your phone bill. Note that this does not allow the application to call emergency numbers.
NETWORK COMMUNICATION
FULL INTERNET ACCESS Allows an application to create network sockets.
YOUR PERSONAL INFORMATION
READ CONTACT DATA Allows an application to read all of the contact (address) data stored on your device. Malicious applications can use this to send your data to other people.
READ SENSITIVE LOG DATA Allows an application to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
WRITE CONTACT DATA Allows an application to modify the contact (address) data stored on your device. Malicious applications can use this to erase or modify your contact data.
PHONE CALLS
READ PHONE STATE AND IDENTITY Allows the application to access the phone features of the device. An application with this permission can determine the phone number and serial number of this phone, whether a call is active, the number that call is connected to and the like.
STORAGE
MODIFY/DELETE USB STORAGE CONTENTS
MODIFY/DELETE SD CARD CONTENTS Allows an application to write to the USB storage. Allows an application to write to the SD card.
SYSTEM TOOLS
RETRIEVE RUNNING APPLICATIONS Allows application to retrieve information about currently and recently running tasks. May allow malicious applications to discover private information about other applications.
PREVENT DEVICE FROM SLEEPING Allows an application to prevent the device from going to sleep.
YOUR ACCOUNTS
DISCOVER KNOWN ACCOUNTS Allows an application to get the list of accounts known by the device.
HARDWARE CONTROLS
CONTROL VIBRATOR Allows the application to control the vibrator.
NETWORK COMMUNICATION
VIEW NETWORK STATE Allows an application to view the state of all networks.
VIEW WI-FI STATE Allows an application to view the information about the state of Wi-Fi.
SYSTEM TOOLS
READ SYNC STATISTICS Allows an application to read the sync stats; e.g., the history of syncs that have occurred.
AUTOMATICALLY START AT BOOT Allows an application to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the application to slow down the overall device by always running.
KILL BACKGROUND PROCESSES Allows an application to kill background processes of other applications, even if memory isn't low.
Sent from my unrooted DroidX using XDA App
I've been using EVO CM7 nightlies for quite a while now and never had issues with Good for Enterprise. With last 3 versions of nightlies, Good hasn't worked. When trying to reinstall Good, it says there is no phone network when trying to register. When looking at Device Info in Good setup screen, it doesn't have a phone number. Tried clearing, data, all cache, etc.
Is anyone else having this issue? It's like CM7 is not sending the phone string to Good when calling it.
A coworker also uses CM7 (not nightlies) and has no issues with Good on EVO. The phone number shows up in Good device info on his EVO.
I had the same problem, but I'm luckily an admin at our company on the good software. After messing around with it... this is what I had to do.
1. Uninstall Good from your phone on CM7 (Must be uninstalled at first for this to work....)
2. Reboot into Recovery and make a Nandroid Backup
3. Wipe the both Caches and Data, Install a Sense Rom
4. Install Good Mobile and have you admin resend you the email to enroll your phone
5. After entering the code and entering a password.. the Good will try to pull emails... kill the good app before this.
6. With Titinium Backup, backup Good and its Data.
7. Reboot into recovery.
8. Wipe the both Caches and the Data... Recover your previous CM7 Nandroid backup.
9. In CM7 launch Titanium backup and restore Good Mobile and its Data.
Worked after that... this way Good would communicate with the phone during the enrollment... which for some reason with CM7 it doesn't work... and just complains about not being connected to your mobile network.
Coincidentally I've just put up another post relating to IMSI numbers which was prompted by Good refusing to activate as some devices are reporting the same 1st 6 digits of their IMSI rather than the full 15 that Good uses to authenticate the license relative to the specific SIM card the license is for. Has anyone else come across this issue with Good?
matt1313 said:
Has anyone been able to get this working with Root? I install fine, enter my pin and it goes through but since I have root it doesnt sync. Im running liberty, any suggestions
Click to expand...
Click to collapse
Mine quit syncing after the first day. I had to upgrade my personal unlimited data plan to a corporate/enterprise data plan for an additional $15/month with Verizon, and reinstall Good.
Sent from my unrooted DroidX using XDA App
Sievers said:
I had the same problem, but I'm luckily an admin at our company on the good software. After messing around with it... this is what I had to do.
1. Uninstall Good from your phone on CM7 (Must be uninstalled at first for this to work....)
2. Reboot into Recovery and make a Nandroid Backup
3. Wipe the both Caches and Data, Install a Sense Rom
4. Install Good Mobile and have you admin resend you the email to enroll your phone
5. After entering the code and entering a password.. the Good will try to pull emails... kill the good app before this.
6. With Titinium Backup, backup Good and its Data.
7. Reboot into recovery.
8. Wipe the both Caches and the Data... Recover your previous CM7 Nandroid backup.
9. In CM7 launch Titanium backup and restore Good Mobile and its Data.
Worked after that... this way Good would communicate with the phone during the enrollment... which for some reason with CM7 it doesn't work... and just complains about not being connected to your mobile network.
Click to expand...
Click to collapse
I previously had a similar problem that I mentioned above - on custom FROYO ROMs it would stop at retrieving policies but flashing to stock eclair, I could finish the setup (and let all current emails come in) and then backup via TB, flash to custom FROYO, then restore and it would be all set. However, when I recently reinstalled Good on Continuum 5.5, I decided to try to let it complete the setup and it did with no problem. I only tried that since my IT admin setup "self-service" for me. I can access a link where I can send a new PIN for my account since it can easily stop syncing. The PIN goes to your corporate email so it is safe to allow.
@Nate2 - sorry I didn't see your post previously. Yes, there are Good policies that can be setup to detect "jailbroken" IPhones, etc. At my company, Good on Android is still not a standard offering because corporate policies are limited to what they can do on Android due to the numerous OS and hardware combinations. However, I have been pushing simply putting trust in the Good encryption (AES 256 if I remember right). Looking at the permissions of the app makes it look at first glance like it can do anything. However, I don't think it is as extensive as it seems. The only "data" outside the Good container that can be read by the app "to my knowledge" is the contact info. This is because your IT administrator can allow Good to sync corporate contact info (in Good) to your phone's contact info. This allows you to easily see who is calling (rather than a phone #) if it is one of your corporate contacts. Although it can access (modify/delete) SD contents, it doesn't say "Read". I don't think I am "reading" too much into that... For internet access, I know Good is working on adding in internet access (from inside the Good container) so browser access is allowed. I am "guessing" this is mostly for IPhones, etc. where the IT admin could stop internet access outside the Good container. That way they could control internet access on a "corporate" device. This is speculation on my part, though. I do think it can send device logs which is required "I think" to detect root access. Look over all the permissions listed keeping in mind READ access to system logs and contact info only and it seems to fit. Therefore, I think they probably can detect that you enabled/disabled GPS but I "doubt" they can detect where you went since I don't "think" that goes in system logs that they pull. If you still have any question, send me a PM since I don't frequently check this thread.
Thanks RichMD.
I once worked in a large company where a sysadmin was fired for accessing the corporate e-mail of an employee (his ex-girlfriend). She reported the incident to HR. Possible access to additional sensitive resources on the phone makes these kinds of incidents worse, and that's why we should be cautious.
Sent from my unrooted DroidX using XDA App
Hello!
I have a question regarding WhatsApp. Is there a possibility to save WhatsApp conversations/history? Through any homebrew-App?
I searched through Google and XDA, didn't find anything useful, unfortunately.
Thanks in advance.
Greetings,
Crash1k
You need to copy out the Isolated Storage for the app. There are a few tools that can do this, including any filesystem browser (such as WP7 Root Tools). An easy way to get the file(s) from your phone to the PC would be my Root Webserver app; find the App GUID of WhatsApp and go to http://<PHONE_IP>/FileSystem/Applications/Data/<APP_GUID>/Data on the PC while the phone runs the webserver app.
Thanks for your fast answer.
Since I'm pretty new to this homebrew-and-phoneHacking thing I don't have much of a clue how to work with those programs. I have downloaded "HtcRootWebServer_231.zip" and the ".xap" file, but I don't know how to get started. Are there any instructions online, perhaps on your homepage, if you have one?
Thanks again.
Oh boy... okay, I assumed you'd already be familiar with dev-unlock at least, so this is going to be a bit complicated. First of all, what phone do you have? On some phones, you won't even be able to run the app because of restrictions that we don't know how to get past.
The summary:
To install an app to the phone from a XAP file, your phone needs to be developer-unlocked. There are a few ways to do this, including an official one from Microsoft (though that costs money unless you're a student). To deploy the apps, you'll probably want to download the Windows Phone SDK from Microsoft as it has all the tools.
To use high-privilege apps, you'll need your phone to be "interop-unlocked" which you can read about on XDA-Devs. Not all phones can currently be interop-unlocked, though many can.
Once your phone is IUed, install the webserver and also WP7 Root Tools v0.9. Use the Root Tools to mark the Webserver app as "Trusted"; this will give it the permissions it needs (it has its own permission elevation code, but I'm almost sure your phone isn't compatible).
if your phone is unlocked:
install wmdc by ultrashot, then, connect it to wmdc, then browse <YOUR WP NAME>\\Applications\Data\218A0EBB-1585-4C7E-A9EC-054CF4569A79 then copy everything from it
GoodDayToDie said:
Oh boy... okay, I assumed you'd already be familiar with dev-unlock at least, so this is going to be a bit complicated. First of all, what phone do you have? On some phones, you won't even be able to run the app because of restrictions that we don't know how to get past.
The summary:
To install an app to the phone from a XAP file, your phone needs to be developer-unlocked. There are a few ways to do this, including an official one from Microsoft (though that costs money unless you're a student). To deploy the apps, you'll probably want to download the Windows Phone SDK from Microsoft as it has all the tools.
To use high-privilege apps, you'll need your phone to be "interop-unlocked" which you can read about on XDA-Devs. Not all phones can currently be interop-unlocked, though many can.
Once your phone is IUed, install the webserver and also WP7 Root Tools v0.9. Use the Root Tools to mark the Webserver app as "Trusted"; this will give it the permissions it needs (it has its own permission elevation code, but I'm almost sure your phone isn't compatible).
Click to expand...
Click to collapse
Thanks a lot for your help, and I'm sorry you had to write this much. I already know how to deploy .xap's and these things, but I have no clue when it comes to the Webserver and how to find the conversations with that. I'll try this for now. I appreciate your help and effort.
aramadsanar said:
if your phone is unlocked:
install wmdc by ultrashot, then, connect it to wmdc, then browse <YOUR WP NAME>\\Applications\Data\218A0EBB-1585-4C7E-A9EC-054CF4569A79 then copy everything from it
Click to expand...
Click to collapse
Is this the same method as the one GoodDayToDie explained?
Thanks for your answer!
//Edit:
I tried it like you, GoodDayToDie, told me. I downloaded your HtcRootWebServer_231.xap and HtcRootWebServer_231.zip. (even though I have a Samsung Omnia 7 with windowbreak unlock (I think that's interop unlock, don't know for sure though)). Then I deployed the .xap, opened the App in the phone but didn't know what to do with the numbers and text fields (like what kind of Admin name and password I should fill in...). After I gave up on the phone-part, I tried to work with the .zip file, but I don't know what to do next. There are 2 folders, one is called "Homebrew" the other "WebServer", I tried to open the programs which are placed in the subfolders (I opened both with Microsoft Visual Studio Solution) but I only get an error and it won't show anything.
Do you know where the problem is? (aside from my lack of knowledge of course :/ )
Thanks for your help.
Crash1k said:
Thanks a lot for your help, and I'm sorry you had to write this much. I already know how to deploy .xap's and these things, but I have no clue when it comes to the Webserver and how to find the conversations with that. I'll try this for now. I appreciate your help and effort.
Is this the same method as the one GoodDayToDie explained?
Thanks for your answer!
//Edit:
I tried it like you, GoodDayToDie, told me. I downloaded your HtcRootWebServer_231.xap and HtcRootWebServer_231.zip. (even though I have a Samsung Omnia 7 with windowbreak unlock (I think that's interop unlock, don't know for sure though)). Then I deployed the .xap, opened the App in the phone but didn't know what to do with the numbers and text fields (like what kind of Admin name and password I should fill in...). After I gave up on the phone-part, I tried to work with the .zip file, but I don't know what to do next. There are 2 folders, one is called "Homebrew" the other "WebServer", I tried to open the programs which are placed in the subfolders (I opened both with Microsoft Visual Studio Solution) but I only get an error and it won't show anything.
Do you know where the problem is? (aside from my lack of knowledge of course :/ )
Thanks for your help.
Click to expand...
Click to collapse
yes, it goes to one objective, but in a simpler method
Eh, WebServer doesn't require installing anything on the PC, WPDM doesn't (directly) require installing anything on the phone. In both cases, you'll need to have WP7 Root Tools installed.
For WPDM + TouchXperience:
Install Windows Phone Device Manager from TouchXperience.com.
Start Zune and connect your phone.
Start WPDM and wait for it to install the TouchXperience app on the phone.
Open WP7 Root Tools v0.9 and go to the Policy pivot.
Mark TouchXperience as "Trusted" and exit Root Tools.
Open TouchXperience (and WPDM on the PC, if you closed it) and connect them.
Either do what @aramadsanar suggested, or use the Installed Apps feature of WPDM to make a backup.
For Root Webserver:
Install Root Webserver (the XAP; the ZIP file is the source code); you already did this.
Open WP7 Root Tools v0.9 and go to the Policy pivot.
Mark "Webserver (HtcRoot)" as Trusted and close Root Tools.
Connect the phone to WiFi (on the same network as your PC) and launch the webserver app.
Set a username and password you can remember ("admin" and "root" for example, though that's insecure).
On the PC, open a web browser and go to the phone's IP address, then drill down into the FileSystem like I said (aramadsanar gave you the app's GUID).
Download the files from the Isolated Storage to your PC, and save them somewhere.
Thanks a LOT for those great instructions, GoodDayToDie! That's really nice, thanks for your effort.
I tried the WebServer method since I didn't want to install Windows Phone SDK 7.1, but I didn't manage to get into my phone through the browser (by typing the I.P. of the phone, which is listed on the Webserver App, just as you said), that's why I was forced to use the other way. Well, who cares, it worked! I have my messages file, but the next problem shows up. I can open the file with the Editor, but it shows weird symbols and you can't read the messages actually. I tried many other programs but none work. Do you guys know how to open those files? The ending is ".sdf". I google'd it for nearly two hours, couldn't find anything useful.
Thanks for the help so far.
You used the WiFi address of the phone, right? The WWAN (cellular) connection is almost certainly firewalled. For example, on my home network the router usually gives my phone IP address 192.168.0.73 on WiFi, so I type in "http://192.168.0.73" into the browser on my PC. It'll ask for username and password; give it what you put on the phone.
As for the file contents, I can't help there. They might be encrypted, in which case the crypto key is somewhere but might be hard to find. Or they might be compressed, in which case you need to find a decoder for that compression. Either one would produce files that appear to be meaningless binary to a casual glance.
One thing you could try for the compressed file possibility is tell 7-Zip to open the file. It's usually very good at recognizing compressed formats. If it's encrypted, you'll probably need to decompile WhatsApp to figure out how. If WhatsApp is obfuscated, you're going to be in a tough spot.
By the way, I assume you downloaded the messages file directly, rather than using the data backup function of WPDM, right?
Hmm... what do you need these files for? If it's just for backup, what you have is *probably* sufficient, so long as you grabbed *all* the files from the IsolatedStorage.
Yeah, I used the WiFi address which is listed on the WebServer App, and I typed that IP Address just like you said into my browser, with "http://" etc., but it still didn't work. It doesn't even ask me for any password or username.
I don't think they are compressed, because I already tried to open/extract them with 7zip, all I got was an error because of the incompatibility. The other thing is, that when I open the files with the "Editor", I can see my messages there, but there are many many other symbols there, which makes it impossible to read the messages. They are too wide spread and you can't tell which messages belong together etc.
Even though I have no idea how to "decompile" WhatsApp, I won't ask you to tell me, since it sounds pretty complicated. I hope there is another way to solve this problem.
Yes, I simply saved the file on my Desktop, didn't use the BackUp function.
That's right, they're "just" for backup, and I didn't grab just the IsolatedStorage folder, I took the whole "Data" folder, just like aramadsanar told me to.
Thanks again for your fast and detailed answer.
If the wifi address didn't work, either your phone was not on WiFi (did the address start with 169.254.?) or your PC was not on WiFi or even connected to the same WiFi network. You can (in theory; I've never tried) also connect to the phone over wired Ethernet by plugging in the phone to the PC with its USB cable, and running Zune on the PC. That will add an ethernet entry to the phone IP list, but I don't know if it can be used for server ports from the PC.
There are a number of free apps for decompiling managed (.NET) code. The latest version of .NET RAIN, distributed right here on XDA-Devs, can do it, for example. Decompiling turns the intermediate-language binary code in a managed DLL or EXE file into C# or VB.NET or whatever. It's not a perfect reversal; the decompiler has to guess what the original source code looked like, and of course comments are missing. It's good enough to read pretty easily, though.
It sounds like what you have is probably a database file of some kind. There are only a few database formats available for WP7 apps (a few more can be accessed using native code).
I'm no pro, so forgive anything stupid I may say in advance. I recently learned that any android application has permission to see any application installed on your device. I'm a bit of a privacy nut, and I have concerns with this for a plethora of reasons. I was hoping to learn of a method that would allow me to somehow prevent apps from being able to see what's installed, or at minimum, mask the actual application names so the data an app gets is useless for any purposes they may have for it.
Is there any way to achieve such a thing?
I'm no pro either, but what I do is I use two apps to accomplish this. The first is MyAppSharer (no root required). The second is Advanced Permission Manager (again, no root required). Both can be found on the play store.
First I use MyAppSharer to create an .apk of the app I want to isolate. Place it In the download folder (or any folder of your choosing). Next I install the .apk with Advanced Permission Manager. While installing simply uncheck the 'view other apps permission' or whatever it's called and that might work.
The only concern I have is that apps usually check to see if they have access to all their permissions before startup, and if one is missing it might either not allow you to launch the app or or will crash. Or it'll work perfectly fine and all's well
Good luck
I think you need to hide apps and permission manager. For me, I used to use Greenify, the ForceStop as permission manager, which are available on xposed module repository, but they both require root.
For hiding apps, maybe the "PrivateMe" can help you, it also can hide photos, install apps in hidden mode.
Dresden_ said:
I'm no pro, so forgive anything stupid I may say in advance. I recently learned that any android application has permission to see any application installed on your device. I'm a bit of a privacy nut, and I have concerns with this for a plethora of reasons. I was hoping to learn of a method that would allow me to somehow prevent apps from being able to see what's installed, or at minimum, mask the actual application names so the data an app gets is useless for any purposes they may have for it.
Is there any way to achieve such a thing?
Click to expand...
Click to collapse
The sudo hide xposed module is exactly what you want to figure out
You will get first list of apps where you have to select ''which app to hide"
Then you will get second list of apps where you can select "from which apps to hide that app"
If you want any help regarding xposed,reply me back
Please push the thanks button if it helped
Enjoy:victory::victory:
Regards milkyway3
Hey I have multiple Android devices 10 at the least. They have all been hacked. I found .dload and .config folders on all of them. Also when I went to remove memory and sim from one it automatically began uploading a custom rom. Of course I've reset them all but not sure how many already have been rooted by someone else. I'm a little familiar with the process so I picked up on some of the signs. My dns has been switched to automatic. My developer options have been configured to the t. It's also configured to infect any other devices near by. I have no idea where to start
Markowski82 said:
Check system.
Bitdefender Mobile Security - Apps on Google Play
Powerful Antivirus Protection, Mobile Security & Virus Cleaner for Your Phone
play.google.com
Click to expand...
Click to collapse
Do u know how to permenitly delete .dwnld and .chat_temp files. They just keep coming back
Markowski82 said:
chatTEMP folder may be created by the SnapChat application.
.dwnld android - Google Search
Click to expand...
Click to collapse
This phone was just purchased with nothing but what came pre-installed. I checked hidden files immediately and it wasn't there. Shortly after I noticed my inability to remove location access from numerous system apps and the inability to configure call forwarding. Checked files again and show hidden files had been switched . When I turned it back on .Chat_temp and .dwlnd were now in my files directory. The files are used to gain administrative privileges and remote access.