Database Info

[HOWTO]Implement Swipe to Remove Notification

Hi there, I want to share this tutorial for implementing Swipe-to-Remove Notification feature found in CyanogenMod to stock ROM (Gingerbread or earlier ROM). Sure it will be available on ICS but for those who like to add one to their custom ROM here's how Currently i don't know to whom should i give credit to, if anybody knows please post below and i'll add the link for the original modder. Thanks to:
1. like-p for help showing me what files to be edited
2. LeoMar75 for some info on how to control Stub switch case
This mod is based on Sony Ericsson Xperia Ray, so take care when adding to another device, some code might be different though so no direct copy paste, please learn some of the line first.
PS: For Froyo mod, please follow Jason-EX here
Requirement:
1. decompiled Framework.jar with Baksmali manager
2. decompiled SystemUI.apk with APK Multi Tool
3. Some Basic understanding about editing xml file and smali code.
4. WinMerge or other comparison tool (to better editing and comparing with my sample file)
5. Backup the framework.jar and SystemUI.apk first!
Files to be edited:
in SystemUI.apk
res/anim/
res/layout/status_bar_latest_event.xml
res/values/public.xml
smali/com/android/systemui/statusbar/LatestItemContainer$1.smali
smali/com/android/systemui/statusbar/LatestItemContainer.smali
smali/com/android/systemui/statusbar/StatusBarService$7.smali (or depends on your numbering, could be $8 or larger)
smali/com/android/systemui/statusbar/StatusBarService.smali
in framework.jar:
smali/com/android/internal/statusbar/IStatusBarService$Stub$Proxy.smali
smali/com/android/internal/statusbar/IStatusBarService$Stub.smali
smali/com/android/internal/statusbar/IStatusBarService.smali
UPDATE: This is the additional guide for other device when editing StatusBarService.smali. See here:
1. HTC based
2. Samsung based
Alright, let's mod one by one
1. Editing SystemUI.apk
1.1 Editing res/anim
We are registering anim object here, so swipe animation can be done.
Create folder anim (if not exists yet) inside /res folder
Create 2 file named slide_out_left_basic.xml and slide_out_right_basic.xml inside res/anim folder
for slide_out_left_basic.xml, edit the file and fill with this
Code:
<?xml version="1.0" encoding="utf-8"?>
<translate android:duration="@android:integer/config_mediumAnimTime" android:fromXDelta="0.0" android:toXDelta="-100.0%p"
xmlns:android="http://schemas.android.com/apk/res/android" />
for slide_out_right_basic.xml, edit the file and fill with this
Code:
<?xml version="1.0" encoding="utf-8"?>
<translate android:duration="@android:integer/config_mediumAnimTime" android:fromXDelta="0.0" android:toXDelta="100.0%p"
xmlns:android="http://schemas.android.com/apk/res/android" />
Save both
Update: Mirko ddd (&shoman94 have pointed that out before but i have no idea where to change, sorry mate) have given me the tip to improve the gesture. read his post here Thanks mate, both of you!
1.2 Editing res/layout/status_bar_latest_event.xml
We are replacing LinearLayout object used in StatusBar with LatestItemContainer here, so notification can be removed. We handle the Styling first by editing this .xml first. Here are the steps:
Change the code from Original code to this (change the bold one)
Code:
<?xml version="1.0" encoding="utf-8"?>
<[B]com.android.systemui.statusbar.LatestItemContainer [/B]android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="65.0sp"
xmlns:android="http://schemas.android.com/apk/res/android">
<com.android.systemui.statusbar.LatestItemView android:id="@id/content" android:background="@android:drawable/status_bar_item_background" android:paddingRight="6.0sp" android:focusable="true" android:clickable="true" android:layout_width="fill_parent" android:layout_height="64.0sp" android:shadowColor="#ff000000" android:shadowDx="0.0" android:shadowDy="1.0" android:shadowRadius="2.0" />
<View android:background="@drawable/divider_horizontal_light_opaque" android:layout_width="fill_parent" android:layout_height="wrap_content" />
<[B]/com.android.systemui.statusbar.LatestItemContainer[/B]>
Save
1.3 Editing res/values/public.xml
This one is for registering anim file that we made on step 1.1 to be available publicly and to be recognized in .smali program. Here are the steps:
Recompile your apk after putting anim file into /res folder
Decompile again the resulting apk
Inside /res/values/public.xml, you'll found something like this:
Code:
<resources>
.
.
.
[B]
<public type="anim" name="slide_out_left_basic" id="0x7f0c0000" />
<public type="anim" name="slide_out_right_basic" id="0x7f0c0001" />
[/B]
</resources>
[*]Remember the ID for both anim lines. This will be applied again on the step 1.4
1.4 Adding smali/com/android/systemui/statusbar/LatestItemContainer$1.smali and smali/com/android/systemui/statusbar/LatestItemContainer.smali
This is the class of LatestItemContainer that will be used to handle the notification list instead of LatestItemView. Here are the steps:
Please download from the attachment
insert the files inside to mentioned folder above
Inside LatestItemContainer$1.smali, there's an id that references the anim from step1.2. please edit it if you have different id for anim left or anim from previous step.
Code:
.line 53
:cond_0
const/high16 v1, [B]0x7f0c[/B]
and
Code:
.line 51
const v1, [B]0x7f0c0001[/B]
1.5 Add smali/com/android/systemui/statusbar/StatusBarService$7.smali (or depends on your existing framework numbering, could be $8 or larger)
This is additional function for StatusBarService to handle onClearNotification function. Here are the steps:
Extract the StatusBarService$7.smali from attachment
If StatusBarService$7.smali does not exist before, just place it inside, if not, skip this step.
If StatusBarService$7.smali exists, Please rename the file to StatusBarService$8.smali (or whatever higher number that is unused) and rename all the line inside the file from
Code:
StatusBarService$7
to
Code:
StatusBarService$8
1.6 Edit smali/com/android/systemui/statusbar/StatusBarService.smali
UPDATE: This is the additional guide for other device when editing StatusBarService.smali. See here:
1. Generic java readout
2. HTC based
3. Samsung based
This is the file that generate NotificationView. Please take care of the changes here more carefully because there might be some differences between vendors in this file. Here are the steps:
Open StatusBarService.smali and find this function
Code:
.method makeNotificationView(Lcom/android/internal/statusbar/StatusBarNotification;Landroid/view/ViewGroup;)[Landroid/view/View;
Find this code in the makeNotificationView function body:
Code:
invoke-virtual {v0, v1, v2, v3}, Landroid/view/LayoutInflater;->inflate(ILandroid/view/ViewGroup;Z)Landroid/view/View;
move-result-object v18
const v4, 0x7f0b0014
move-object/from16 v0, v18
move v1, v4
invoke-virtual {v0, v1}, Landroid/view/View;->findViewById(I)Landroid/view/View;
move-result-object v10
Insert the bold code below between the existing code:
Code:
invoke-virtual {v0, v1, v2, v3}, Landroid/view/LayoutInflater;->inflate(ILandroid/view/ViewGroup;Z)Landroid/view/View;
move-result-object v18
[B] check-cast v18, Lcom/android/systemui/statusbar/LatestItemContainer;
.line 516
.local v18, row:Lcom/android/systemui/statusbar/LatestItemContainer;
move-object/from16 v0, v16
iget v0, v0, Landroid/app/Notification;->flags:I
move v4, v0
and-int/lit8 v4, v4, 0x2
if-nez v4, :cond_swno
move-object/from16 v0, v16
iget v0, v0, Landroid/app/Notification;->flags:I
move v4, v0
and-int/lit8 v4, v4, 0x20
if-nez v4, :cond_swno
new-instance v4, Lcom/android/systemui/statusbar/StatusBarService$7;
move-object v0, v4
move-object/from16 v1, p0
move-object/from16 v2, p1
invoke-direct {v0, v1, v2}, Lcom/android/systemui/statusbar/StatusBarService$7;-><init>(Lcom/android/systemui/statusbar/StatusBarService;Lcom/android/internal/statusbar/StatusBarNotification;)V
move-object/from16 v0, v18
move-object v1, v4
invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->setOnSwipeCallback(Ljava/lang/Runnable;)V
.line 735
:cond_swno[/B]
const v4, 0x7f0b0014
move-object/from16 v0, v18
move v1, v4
[B] invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->findViewById(I)Landroid/view/View;[/B]
move-result-object v10
Once again, change
Code:
StatusBarService$7
to
Code:
StatusBarService$8
line if you happened to have StatusBarService$8.smali as the result of renaming on the previous step.
IMPORTANT LOGIC TO BE UNDERSTOOD: This step tells the function to:
1. cast the already made View Object to LatestItemContainer instead of using LatestView class.
2. Filter if the Notification is removable or not
3. the LatestItemContainer object (v18) is assigned with onSwipeCallback(new StatusBarService$7)
Change the following (still on the same function body):
Code:
move v1, v4
invoke-virtual {v0, v1}, Landroid/view/View;->setDrawingCacheEnabled(Z)V
.line 542
const/4 v4, 0x3
to
Code:
move v1, v4
[B] invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->setDrawingCacheEnabled(Z)V
[/B]
.line 542
const/4 v4, 0x3
Please note:
StatusBarService.smali might be different between vendor, so please adapt with your .smali to implement the above coding.
2. Editing framework.jar
2.1 editing smali/com/android/internal/statusbar/IStatusBarService$Stub.smali
Here are the steps:
Add this code on variable declaration part inside the file
Code:
.field static final TRANSACTION_onClearAllNotifications:I = 0xb
[B].field static final TRANSACTION_onNotificationClear:I = 0xc[/B]
.field static final TRANSACTION_onNotificationClick:I = 0x9
.field static final TRANSACTION_onNotificationError:I = 0xa
If the 0xc is already used on another static value, you must change it so it remains unique.
Find this code:
Code:
.method public onTransact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.registers 14
.parameter "code"
.parameter "data"
.parameter "reply"
.parameter "flags"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 39
sparse-switch p1, :sswitch_data_124
change to
Code:
.method public onTransact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.registers 14
.parameter "code"
.parameter "data"
.parameter "reply"
.parameter "flags"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 39
[B]sparse-switch p1, :sswitch_data_13e[/B]
Insert/replace this code (it is at the end of the file):
Code:
.line 176
const/4 v0, 0x1
goto/16 :goto_7
.line 39
:sswitch_data_124
.sparse-switch
0x1 -> :sswitch_f
0x2 -> :sswitch_1c
0x3 -> :sswitch_29
0x4 -> :sswitch_42
0x5 -> :sswitch_5f
0x6 -> :sswitch_7b
0x7 -> :sswitch_8d
0x8 -> :sswitch_c7
0x9 -> :sswitch_d5
0xa -> :sswitch_ef
0xb -> :sswitch_116
0x5f4e5446 -> :sswitch_8
.end sparse-switch
to
Code:
[B]
.line 176
const/4 v0, 0x1
goto/16 :goto_7
.end local v1 #_arg0:Ljava/lang/String;
.end local v2 #_arg1:Ljava/lang/String;
.end local v3 #_arg2:I
:sswitch_124
const-string v0, "com.android.internal.statusbar.IStatusBarService"
invoke-virtual {p2, v0}, Landroid/os/Parcel;->enforceInterface(Ljava/lang/String;)V
.line 177
invoke-virtual {p2}, Landroid/os/Parcel;->readString()Ljava/lang/String;
move-result-object v1
.line 178
.restart local v1 #_arg0:Ljava/lang/String;
invoke-virtual {p2}, Landroid/os/Parcel;->readString()Ljava/lang/String;
move-result-object v2
.line 179
.restart local v2 #_arg1:Ljava/lang/String;
invoke-virtual {p2}, Landroid/os/Parcel;->readInt()I
move-result v3
.line 180
.restart local v3 #_arg2:I
invoke-virtual {p0, v1, v2, v3}, Lcom/android/internal/statusbar/IStatusBarService$Stub;->onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.line 181
invoke-virtual {p3}, Landroid/os/Parcel;->writeNoException()V
.line 182
const/4 v0, 0x1
goto/16 :goto_7[/B]
.line 39
:sswitch_data_13e
.sparse-switch
0x1 -> :sswitch_f
0x2 -> :sswitch_1c
0x3 -> :sswitch_29
0x4 -> :sswitch_42
0x5 -> :sswitch_5f
0x6 -> :sswitch_7b
0x7 -> :sswitch_8d
0x8 -> :sswitch_c7
0x9 -> :sswitch_d5
0xa -> :sswitch_ef
0xb -> :sswitch_116
[B]0xc -> :sswitch_124[/B]
0x5f4e5446 -> :sswitch_8
.end sparse-switch
it's important to note this
Code:
[B]0xc -> :sswitch_124[/B]
If you rename the static at the previous steps, please change the 0xc accordingly.
2.2 Editing smali/com/android/internal/statusbar/IStatusBarService$Stub$Proxy.smali
Here are the steps:
Insert these function code to the file:
Code:
.method public onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.registers 9
.parameter "pkg"
.parameter "tag"
.parameter "id"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 359
invoke-static {}, Landroid/os/Parcel;->obtain()Landroid/os/Parcel;
move-result-object v0
.line 360
.local v0, _data:Landroid/os/Parcel;
invoke-static {}, Landroid/os/Parcel;->obtain()Landroid/os/Parcel;
move-result-object v1
.line 362
.local v1, _reply:Landroid/os/Parcel;
:try_start_8
const-string v2, "com.android.internal.statusbar.IStatusBarService"
invoke-virtual {v0, v2}, Landroid/os/Parcel;->writeInterfaceToken(Ljava/lang/String;)V
.line 363
invoke-virtual {v0, p1}, Landroid/os/Parcel;->writeString(Ljava/lang/String;)V
.line 364
invoke-virtual {v0, p2}, Landroid/os/Parcel;->writeString(Ljava/lang/String;)V
.line 365
invoke-virtual {v0, p3}, Landroid/os/Parcel;->writeInt(I)V
.line 366
iget-object v2, p0, Lcom/android/internal/statusbar/IStatusBarService$Stub$Proxy;->mRemote:Landroid/os/IBinder;
const/16 v3, 0xa
const/4 v4, 0x0
invoke-interface {v2, v3, v0, v1, v4}, Landroid/os/IBinder;->transact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.line 367
invoke-virtual {v1}, Landroid/os/Parcel;->readException()V
:try_end_21
.catchall {:try_start_8 .. :try_end_21} :catchall_28
.line 370
invoke-virtual {v1}, Landroid/os/Parcel;->recycle()V
.line 371
invoke-virtual {v0}, Landroid/os/Parcel;->recycle()V
.line 373
return-void
.line 370
:catchall_28
move-exception v2
invoke-virtual {v1}, Landroid/os/Parcel;->recycle()V
.line 371
invoke-virtual {v0}, Landroid/os/Parcel;->recycle()V
throw v2
.end method
Please inspect the code for this part:
Code:
[B]const/16 v3, 0xa[/B]
const/4 v4, 0x0
invoke-interface {v2, v3, v0, v1, v4}, Landroid/os/IBinder;->transact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
The bold one must match on one of the switch case value at the end of IStatusBarService$Stub.smali,
in my phone actually the valid one is the TRANSACTION_onNotificationError (0xa) so if your NotificationError is not 0xa but 0xb for example, please change the bold one to 0xb
Save
2.3 editing smali/com/android/internal/statusbar/IStatusBarService.smali
Insert this function code to the file. Here are the steps:
Insert these function code to the file:
Code:
.method public abstract onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.end method
Save
There you have it AFAIK, the files that you need to take care more than others are:
1. smali/com/android/systemui/statusbar/StatusBarService.smali
2. res/values/public.xml
The rest can be applied from the attachment below directly. Ok that's all, after you are done, compile both SystemUI.apk and Framework.jar.
How to Compile the right way?
1. SystemUI.apk ->
Compile with APK Multi Tool, press y and y twice with all the requested input,
delete modified file from keep folder, and after that continue compiling.
Copy from original APK the META-INF and AndroidManifest.xml to the unsignedSystemUI.apk
rename unsignedSystemUI.apk to signedSystemUI.apk
select Zipalign from APK Multi Tool to optimize apk.
Rename to SystemUI.apk (move the original one just in case)
2. framework.jar ->
Smali inside Baksmali Manager
Replace classes.dex inside framework.jar with the generated one.
and apply on your phone.
Hope this helps you (programmer ofc, not end user ) to implement on your device.
G'day!

Mate, thank you so much for this - I have been trying to figure it out for our ROM for weeks LOL I'm going to give it a try this evening and I'll let you know if I get it! Thanks again

Dunc001 said:
Mate, thank you so much for this - I have been trying to figure it out for our ROM for weeks LOL I'm going to give it a try this evening and I'll let you know if I get it! Thanks again
Click to expand...
Click to collapse
Ok let me know mate

ill try it on my SGY

Looks fun! great post

tommytomatoe said:
Looks fun! great post
Click to expand...
Click to collapse
Updated step, to give you some warning about StatusBarService$7 naming convention

definitely gonna give this a try!!

great akaka.try it soon.
did u know how to port ICS layout to stock rom? can u write a tut?
this will be great!!

nvt992 said:
great akaka.try it soon.
did u know how to port have ICS layout to stock rom? can u write a tut?
this will be great!!
Click to expand...
Click to collapse
What layout? Do you mean ICS launcher layout or..?

no.see my attach

nvt992 said:
no.see my attach
Click to expand...
Click to collapse
Well do you have the original link? First, i know nothing about that, so i should learn first. and secondly, it's more about theme editing, so i think it's more about editing XML inside SystemUI.apk rather than coding a .smali like above. Thirdly, the shortcut for setting in ICS IMHO is not as efficient as Power Widget Status Bar.

hansip87 said:
Well do you have the original link? First, i know nothing about that, so i should learn first. and secondly, it's more about theme editing, so i think it's more about editing XML inside SystemUI.apk rather than coding a .smali like above. Thirdly, the shortcut for setting in ICS IMHO is not as efficient as Power Widget Status Bar.
Click to expand...
Click to collapse
this is for cm7
patch http://forum.xda-developers.com/showthread.php?t=1324924
or original theme
http://forum.xda-developers.com/showthread.php?t=1334922
hope u can do it

nvt992 said:
this is for cm7
patch http://forum.xda-developers.com/showthread.php?t=1324924
or original theme
http://forum.xda-developers.com/showthread.php?t=1334922
hope u can do it
Click to expand...
Click to collapse
Well ok thanks but don't count on me ok because i am currently researching for 2G/3G toggle button for PowerWidget, this one is not that high on my list, but you never know..

ok thank you

where can i get Baksmali manager?

lasmaty07 said:
where can i get Baksmali manager?
Click to expand...
Click to collapse
Check back later mate, just uploading right now because of on the original link, it's dead. I'll upload it for us all to share
EDIT: Uploaded. Click Baksmali Manager link on the first page to download. APK Multi Tool can be found on the same parent thread (Hacking General)

Done, but get this error when recompiling .apk
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\me\Desktop\folder>apktool.bat b -f -d out
I: Smaling...
Exception in thread "main" brut.androlib.AndrolibException: Could not smali file
: [email protected]
at brut.androlib.src.DexFileBuilder.addSmaliFile(Unknown Source)
at brut.androlib.src.DexFileBuilder.addSmaliFile(Unknown Source)
at brut.androlib.src.SmaliBuilder.buildFile(Unknown Source)
at brut.androlib.src.SmaliBuilder.build(Unknown Source)
at brut.androlib.src.SmaliBuilder.build(Unknown Source)
at brut.androlib.Androlib.buildSourcesSmali(Unknown Source)
at brut.androlib.Androlib.buildSources(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.apktool.Main.cmdBuild(Unknown Source)
at brut.apktool.Main.main(Unknown Source)
Tried to do it manually like this and using apk multitool, but same error in log.
even tried to compile just after decompiling but that's no help.. same error
Any help?

jaggyjags said:
Done, but get this error when recompiling .apk
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\me\Desktop\folder>apktool.bat b -f -d out
I: Smaling...
Exception in thread "main" brut.androlib.AndrolibException: Could not smali file
: [email protected]
at brut.androlib.src.DexFileBuilder.addSmaliFile(Unknown Source)
at brut.androlib.src.DexFileBuilder.addSmaliFile(Unknown Source)
at brut.androlib.src.SmaliBuilder.buildFile(Unknown Source)
at brut.androlib.src.SmaliBuilder.build(Unknown Source)
at brut.androlib.src.SmaliBuilder.build(Unknown Source)
at brut.androlib.Androlib.buildSourcesSmali(Unknown Source)
at brut.androlib.Androlib.buildSources(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.apktool.Main.cmdBuild(Unknown Source)
at brut.apktool.Main.main(Unknown Source)
Tried to do it manually like this and using apk multitool, but same error in log.
even tried to compile just after decompiling but that's no help.. same error
Any help?
Click to expand...
Click to collapse
APKTools is a bit outdated and i'm afraid some incompatibilites with Google SDK might be the source of the problem. search APK Multi Tools and use that one instead with SDK release 16 and up.

Hello, and thanks for the how-to!
Sadly I couldn't get it to work on my phone (Motorola Atrix 2). Some of the smali files were pretty different... I tried my best but there were definitely moments when I wasn't sure if I was doing the correct thing... SystemUI won't compile.

Hi, all. Seems the statusbarservice.smali is very different from each other. So to help you all, this is the java code that should give you a better understanding. Please read here https://github.com/nadlabak/android...m/android/server/status/StatusBarService.java
Sent from my ST18i using XDA App

[HOW-TO][MOD][MIUI 4] 3-way Reboot Options

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a mod that will add three options to the reboot menu of MIUI 4. It is based on the 4-way reboot mod for MIUI 2.x by roenano with my modifications. In summary, this is what you'll get after following the how-to:
- a deodexed MIUI 4 ROM
- basic knowledge of how to use smali/baksmali tools
- basic knowledge of how smali code works is a plus
- a good text editor e.g. Notepad++ or Sublime Text 2
- some "ROM modder" intuition and ability to adapt when things do not go exactly like what the how-to says
We're going to add and modify some smali files in android.policy.jar to redirect the original "Reboot" menu to a custom class that will display the reboot options and perform the action according to what the user has selected.
We'll have to extract the smali from android.policy.jar. I'm going to assume that you already know how to use smali/baksmali. The only suggestion is you should specify the output directory when using baksmali to prevent some confusion -- especially when you're doing many things in the same working directory. The command I normally use when decompiling classes.dex extracted from android.policy.jar is as follows:
Code:
baksmali -o android.policy classes.dex
All smali files will be put in android.policy directory. After you finished editing you can issue the following command to recompile it back to classes.dex:
Code:
smali -o classes.dex android.policy
Let's assume we're working in android.policy directory from now on.
We'll start with the easy part by adding some smali files (custom classes) to the package. You can download the files here. The zip contains essentially three files as follows:
Code:
[FONT="Courier New"]MiuiGlobalActions$9.smali[/FONT]
[FONT="Courier New"]MiuiGlobalActions$9$1.smali[/FONT]
[FONT="Courier New"]MiuiGlobalActions$9$2.smali[/FONT]
First, take a look in com/android/internal/policy/impl/ directory and see if there is already a file named MiuiGlobalActions$9.smali or not. If there is no such file then you're lucky, just copy over the three files into the mentioned directory.
But if the file already exists then we'll have to change our file names so it won't override what's already there. We can do it by renaming the three above files and change $9 to the next available number e.g. $10 (actually any unused number will work, just make sure you use the same number in all three files) Then open each renamed file and replace every occurrences of MiuiGlobalActions$9 with MiuiGlobalActions$10 (or the number you used). A simple "search/replace all" in the text editor should do the trick. After that, copy over the three files into the mentioned directory.
Next we'll have to edit two smali files in order to get it working.
com/android/internal/policy/impl/MiuiGlobalActions$SinglePressAction.smali
Add the highlighted code just after .end annotation and before # instance fields
Code:
.end annotation
[COLOR="Red"]# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;[/COLOR]
# instance fields
.field private mIconResId:I
Then add another highlighted code after # direct methods and before .method protected constructor <init>(II)V
Code:
# direct methods
[COLOR="Red"].method static constructor <clinit>()V
.registers 3
const/4 v0, 0x3
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Normal"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Recovery"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Bootloader"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/MiuiGlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method[/COLOR]
.method protected constructor <init>(II)V
.registers 3
.parameter "iconResId"
Then save the file. The above modifications will populate the options array used by the three files we copied earlier. Next we'll redirect the original "Reboot" menu to our custom class, this can be done by editing:
com/android/internal/policy/impl/MiuiGlobalActions.smali
In order to know which line of code to change, we'll have to find which smali is being called when the user select the original "Reboot" menu.
If you're using Linux or Cygwin, open the terminal, go to com/android/internal/policy/impl/ directory and use the following command:
Code:
grep -l reboot *.smali
If you're using Command Prompt, open it, go to the same directory and use the following command instead:
Code:
findstr /M reboot *.smali
The output should be similar to the following. There will be a file named MiuiGlobalActions$#.smali where # is some number different from the files we added earlier. In my case this number is 3.
Code:
[B]MiuiGlobalActions$3.smali[/B]
MiuiGlobalActions$9$1.smali
MiuiGlobalActions$9$2.smali
MiuiGlobalActions$9.smali
MiuiGlobalActions$SinglePressAction.smali
To make sure it's the right file that handle the reboot command, open MiuiGlobalActions$3.smali and you'll see a line similar to this:
Code:
invoke-static {v0, v1, v2}, Lcom/android/internal/app/[B]ShutdownThread;->reboot[/B](Landroid/content/Context;Ljava/lang/String;Z)V
Once we know the file name, the modification is super easy. Just search and replace MiuiGlobalActions$3 with MiuiGlobalActions$9 in com/android/internal/policy/impl/MiuiGlobalActions.smali. Remember to change $9 to the number you used if you changed the three files' names. Note that there should be only two instances to be replaced. After you finish, save the file.
That's it. Now you'll have to recompile the smali code to classes.dex, put it back into android.policy.jar, push the jar onto the phone and reboot

Reserved just in case

Thanks you, kong :-D

kong
Thank any way/
Is it possible make zip file to install this menu through recovery? Be cause I do not have idea how to work with smali files, I think I am not alone how to operate with it/ =)

toqpuk said:
kong
Thank any way/
Is it possible make zip file to install this menu through recovery? Be cause I do not have idea how to work with smali files, I think I am not alone how to operate with it/ =)
Click to expand...
Click to collapse
It's possible to provide a flashable zip for a specific version of MIUI for a specific device, but not a generic one that can be used by all devices since android.policy.jar keeps changing in each MIUI releases.
That's why I wrote a "guide" so anyone who has those "prerequisites" can apply it to the appropriate android.policy.jar

I tried this on my miui v4 rom port, but it dint work, when ever i long press my power button miui reboots. here's my edited android.policy.jar.
http://www.mediafire.com/?lw7y57yk25drdy4

If someone would like to add Quick Reboot to the menu:
Create a new file, for example: GlobalActions$12.smali:
Code:
.class Lcom/android/internal/policy/impl/GlobalActions$12;
.super Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.source "GlobalActions.java"
# annotations
.annotation system Ldalvik/annotation/EnclosingMethod;
value = Lcom/android/internal/policy/impl/GlobalActions;->createDialog()Landroid/app/AlertDialog;
.end annotation
.annotation system Ldalvik/annotation/InnerClass;
accessFlags = 0x0
name = null
.end annotation
# instance fields
.field final synthetic this$0:Lcom/android/internal/policy/impl/GlobalActions;
# direct methods
.method constructor <init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
.registers 4
.parameter
.parameter "x0"
.parameter "x1"
.prologue
.line 267
iput-object p1, p0, Lcom/android/internal/policy/impl/GlobalActions$12;->this$0:Lcom/android/internal/policy/impl/GlobalActions;
invoke-direct {p0, p2, p3}, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;-><init>(II)V
return-void
.end method
# virtual methods
.method public onPress()V
.locals 6
.prologue
.line 142
invoke-static {}, Ljava/lang/Runtime;->getRuntime()Ljava/lang/Runtime;
move-result-object v3
.line 143
.local v3, localRuntime:Ljava/lang/Runtime;
const/4 v4, 0x4
new-array v0, v4, [Ljava/lang/String;
.line 144
.local v0, arrayOfString2:[Ljava/lang/String;
const/4 v4, 0x0
const-string v5, "pkill"
aput-object v5, v0, v4
.line 145
const/4 v4, 0x1
const-string v5, "-TERM"
aput-object v5, v0, v4
.line 146
const/4 v4, 0x2
const-string v5, "-f"
aput-object v5, v0, v4
.line 147
const/4 v4, 0x3
const-string v5, "system_server"
aput-object v5, v0, v4
.line 151
:try_start_0
invoke-virtual {v3, v0}, Ljava/lang/Runtime;->exec([Ljava/lang/String;)Ljava/lang/Process;
:try_end_0
.catch Ljava/io/IOException; {:try_start_0 .. :try_end_0} :catch_0
move-result-object v2
.line 158
:goto_0
return-void
.line 153
:catch_0
move-exception v1
.line 156
.local v1, e:Ljava/io/IOException;
invoke-virtual {v1}, Ljava/io/IOException;->printStackTrace()V
goto :goto_0
.end method
.method public showBeforeProvisioning()Z
.locals 1
.prologue
.line 162
const/4 v0, 0x1
return v0
.end method
.method public showDuringKeyguard()Z
.locals 1
.prologue
.line 167
const/4 v0, 0x1
return v0
.end method
called like this:
Code:
const/4 v1, 0x4
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$12;
const v3, 0x1080410
const v4, 0x1040523
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$12;->(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
It requires a new busybox installation to succeed

siulmagic said:
I tried this on my miui v4 rom port, but it dint work, when ever i long press my power button miui reboots. here's my edited android.policy.jar.
http://www.mediafire.com/?lw7y57yk25drdy4
Click to expand...
Click to collapse
I believe you forgot to modify this line in MiuiGlobalActions.smali
Code:
invoke-direct {v1, p0, v2, v3}, Lcom/android/internal/policy/impl/[B]MiuiGlobalActions$3[/B];-><init>(Lcom/android/internal/policy/impl/MiuiGlobalActions;II)V

kong said:
I believe you forgot to modify this line in MiuiGlobalActions.smali
Code:
invoke-direct {v1, p0, v2, v3}, Lcom/android/internal/policy/impl/[B]MiuiGlobalActions$3[/B];-><init>(Lcom/android/internal/policy/impl/MiuiGlobalActions;II)V
Click to expand...
Click to collapse
Thanks for the tutorial.... It's work great.... lucky me there is no file use $9.... so I just copy the file and edit some smali.... thanks sir
Sent from my GT-S5670 using Tapatalk 2

AldoSebastian said:
Thanks for the tutorial.... It's work great.... lucky me there is no file use $9.... so I just copy the file and edit some smali.... thanks sir
Click to expand...
Click to collapse
Thanks for confirming that it works

can you guys check if this works on miui 2.6.22, i just tried it and the 3 way reboot menu does not come up, it just reboots the device. i dont think this is compatible anymore.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
disregard i edited the wrong globalpressaction smali

siulmagic said:
can you guys check if this works on miui 2.6.22, i just tried it and the 3 way reboot menu does not come up, it just reboots the device. i dont think this is compatible anymore.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
disregard i edited the wrong globalpressaction smali
Click to expand...
Click to collapse
I can confirm that 3way reboot mod works on my Sensation on MIUI ICS 2.6.22. It has been made from scratches using kong's how-to.

thanks for this guide.
I wanted to port this to my device but the download with the three smali files is dead (not reachable for me).
Can someone re-upload the files?
Edit: Ok, I've found an older build with those files included. Works fine. Expect the missing hot boot option

For me, the boot to RECOVERY won't work.. Can you help me to do this?

Can someone reupload files as aosp.in is off

Alberto96 said:
Can someone reupload files as aosp.in is off
Click to expand...
Click to collapse
I've found another release which included these files
zip file attached
Anyone an idea how to include Hot reboot?

I was going to ask the same thing: is it possible to include a Hot Boot option back? I compared an older android.policy.jar which included the Hot Boot option, so I could add it back by copying the same lines but I haven't tried because I saw you recently switched to 3-way instead of 4-way. I thought that newer MIUI versions just don't allow hot reboot anymore, but if it's possibile to add it back, I would love to try.

thunderteaser said:
I was going to ask the same thing: is it possible to include a Hot Boot option back? I compared an older android.policy.jar which included the Hot Boot option, so I could add it back by copying the same lines but I haven't tried because I saw you recently switched to 3-way instead of 4-way. I thought that newer MIUI versions just don't allow hot reboot anymore, but if it's possibile to add it back, I would love to try.
Click to expand...
Click to collapse
I saw some ROMs using the 4way-reboot. So I think it's still possible. But I don't know how to do it

Mod doesn't work for me, phone gets unstable and keeps rebooting (that actually happens everytime i modify a jar file, maybe doing something wrong when recompiling?)
I got the 3 way reboot menu option but it doesn't work (meaning it just reboots the phone normally)
Xperia st17i

Qns: Do u still keep the GlobalActions$3.smali?

[GUIDE][DEVELOPMENT]EPM / 4-Way Boot Redux

Introduction
The EPM tweak by untermensch (linked here) is admittedly a difficult mod, until evanlocked graciously provided us with a tutorial of his 4-way boot tweak (linked here), originally given to us by kahvitahra (linked here). I have decided to make my own version of the above tweaks by applying the concepts the above developers gave to us, just by modifying framework-res.apk and android.policy.jar.
Scope
This EPM tweak can easily be applied to stock, deodexed versions of the Galaxy Y firmware (latest incarnation of which is now DXLJ1). By this, I mean the power menu is still pristine with no EPM hacks whatsoever. Of course, it might also work with ROMs with EPM/4-way boot hacks already in place, with some modifications to the code which I will not be touching here.
This EPM tweak may also work with stock deodexed versions of other phones. However, I have not personally tested it. You may try this guide but please do so at your own risk.
Liability
I will not be held liable if you should brick your phone after following this guide. Having said so, please proceed at your own risk. As a precaution, please perform a nandroid backup of your phone, in case something goes wrong.
Requirements
Apktool
Framework-res.apk
Android.policy.jar
Notepad++
Winrar/7zip
Common sense and lots of patience.
Preparation
Download the archive needed for this tweak (View attachment bums_epm_files.zip). Extract its contents to any folder of your choice. You should have the following files inside the archive:
GlobalActions$99$1.smali
GlobalActions$99$2.smali
GlobalActions$99.smali
ic_bum_restart.png
Prepare the work folder where you will be reverse-engineering the framework files. I created a C:\temp\epm folder for this purpose.
Pull framework-res.apk and android.policy.jar from the /system/framework/ folder of your phone. You can do this with root explorer. Don’t ask me how.
Copy the files you pulled from step 2 into the folder you prepared in step 1.
Open a command line and issue a “cd \your_work_folder” command to go to your work folder. If you are following my example in step 1, the correct command will be “cd \temp\epm”. Don’t ask me if you should press the enter key at the end of that command.
Reversing framework-res.apk
Decompile framework-res.apk with “apktool d –f framework-res.apk” from the command line.
Open framework-res\res\values\string.xml with notepad++ and insert the following line at the end of the file:
Code:
[COLOR="Blue"]<string [/COLOR][COLOR="Red"]name[/COLOR]=[COLOR="Indigo"]"bum_restart"[/COLOR]>Restart[COLOR="Blue"]</string>[/COLOR]
Copy ic_bum_restart.png and place it inside the framework-res\res\drawable-ldpi folder.
Compile framework-res with “apktool b –f framework-res.apk”. Your framework-res folder should now have build and dist folders inside.
Change to the framework-res/dist folder (cd framework-res/dist) and decompile the framework-res.apk.
Open framework-res/dist/framework-res/res/values/public.xml with notepad++. Search for the name of the string you created in step 2 (“bum_restart”). Copy the search result line into a new notepad++ document.
Still in public.xml, search for “ic_bum_restart”. Again, copy the search result line into your notepad++ document. You should then have the following lines:
Code:
[COLOR="Blue"]<public [COLOR="Red"]type[/COLOR]=[COLOR="Purple"]"string"[/COLOR] [COLOR="Red"]name[/COLOR]=[COLOR="Purple"]"bum_restart"[/COLOR] [COLOR="Red"]id[/COLOR]=[COLOR="Purple"]"0x010404d3"[/COLOR] />[/COLOR]
[COLOR="Blue"]<public[COLOR="Red"] type[/COLOR]=[COLOR="Purple"]"drawable"[/COLOR] [COLOR="red"]name[/COLOR]=[COLOR="purple"]"ic_bum_restart"[/COLOR] [COLOR="red"]id[/COLOR]=[COLOR="purple"]"0x010803ef"[/COLOR] />[/COLOR]
Make note of the ids of ic_bum_restart and bum_restart. These resource ids will be needed once we modify android.policy.jar.
Open the original framework-res.apk in winrar/7zip.
Drag framework-res/build/apk/resources.arsc to the open framework-res.apk to replace the original file. Make sure the compression rate is set to “store”.
Similarly, drag framework-res/build/res/drawable-ldpi/ic_bum_restart.png to framework-res.apk. Again, compression rate should be set to “store”
That’s it. You now have a modified framework-res.apk with the resources needed by android.policy.jar. Moving on now to reversing android.policy.jar.
Continued on page 2.

Reversing android.policy.jar
If you haven’t done so, change back to your work folder (cd \temp\epm if you are following my example).
Decompile android.policy.jar with apktool. By this time, I presume you now know how to do this.
Place copies of the GlobalActions*.smali files you extracted previously inside the android.policy.jar.out\smali\com\android\internal\policy\impl\ folder.
Open android.policy.jar.out.smali\com\android\internal\policy\impl\GlobalActions.smali with notepad++.
We will be modifying codes inside .method private createDialog()Landroid/app/AlertDialog;. Begin by searching for the method name.
We need to increase the size of the array for the power menu dialog. Do this by replacing
Code:
const/4 v11, 0x4
with
Code:
const/4 v11, [B]0x5[/B]
just a few lines after the method header (line 432).
Now, search for
Code:
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$4;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
Insert the following codes after the aput-object v2, v0, v1 line:
Code:
const/4 v1, 0x4
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$99;
const v3, 0x10803ef # id of ics_bum_restart
const v4, 0x10404d3 # id of bum_restart
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$99;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
Make note of the ids of v3 and v4. They should match the ids you have generated after working with framework-res.apk and which you previously saved in Step II.7. Also note that the ids of resources in smali codes are not preceded with zeros after 0x. Thus,
Code:
const v3, 0x10803ef
corresponds to
Code:
[COLOR="blue"]<public [COLOR="Red"]type[/COLOR]=[COLOR="Purple"]"drawable"[/COLOR] [COLOR="red"]name[/COLOR]=[COLOR="purple"]"ic_bum_restart"[/COLOR] [COLOR="red"]id[/COLOR]=[COLOR="purple"]"0x010803ef[/COLOR]" />[/COLOR]
Once you have ensured that your codes are in order, save and close GlobalActions.smali.
Now, open android.policy.jar.out.smali\com\android\internal\policy \impl\GlobalActions$SinglePressAction.smali
Add the following codes before the line # instance fields:
Code:
# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;
Add the following codes after the line # direct methods
Code:
.method static constructor <clinit>()V
.locals 3
const/4 v0, 0x3
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Reboot"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Hot Boot"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Recovery"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method
Your modifications should look as follows after your changes:
Code:
.class abstract Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.super Ljava/lang/Object;
.source "GlobalActions.java"
# interfaces
.implements Lcom/android/internal/policy/impl/GlobalActions$Action;
# annotations
.annotation system Ldalvik/annotation/EnclosingClass;
value = Lcom/android/internal/policy/impl/GlobalActions;
.end annotation
.annotation system Ldalvik/annotation/InnerClass;
accessFlags = 0x40a
name = "SinglePressAction"
.end annotation
[B][COLOR="Blue"]# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;[/COLOR][/B]
# instance fields
.field private final mIconResId:I
.field private final mMessageResId:I
# direct methods
[B][COLOR="blue"].method static constructor <clinit>()V
.locals 3
const/4 v0, 0x3
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Reboot"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Hot Boot"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Recovery"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method[/COLOR][/B]
.method protected constructor <init>(II)V
.locals 0
.parameter "iconResId"
.parameter "messageResId"
. . .
Save and close GlobalActions$SinglePressAction.smali.
Compile android.policy.jar.out. You know how to do it, right?
Open the original android.policy.jar with winrar. Replace the classes.dex inside with the one in android.policy.jar.out/build/apk/.
You are done.
Final Steps
There is really nothing left to do but to push the modified framework-res.apk and android.policy.jar back into your /system/framework/ folder. If you are doing it using root explorer, I recommend pushing framework-res.apk first, change its permission to 644 and reboot your phone. Then, do the same for android.policy.jar.

Screen Shots
After long-pressing the power button:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After choosing "Restart"
That's all, folks!

Credits
Credits to this mod belong to untermensch, kahvitahra and evanlocked. Without them, this tweak will not have been possible for me.

Thanks for it bro, will try this shortly :good: btw can this be used on Galaxy Pocket?

Reserved
Sent from my GT-S5360 using Xparent ICS Blue Tapatalk 2

shivamsejal said:
Thanks for it bro, will try this shortly :good: btw can this be used on Galaxy Pocket?
Click to expand...
Click to collapse
Try it bro. Just make a nandroid backup first.

I tried it on my Galaxy Ace GT-S5830i,I adapted this code and others:
Code:
const/4 v1, 0x4
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$99;
const v3, 0x10803ef # id of ics_bum_restart
const v4, 0x10404d3 # id of bum_restart
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$99;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
because my invoke-direct and aput-object are different.
But when I press power button,the phone vibrate and the list of the option is not showing.
Can you help me?
I can give you the files that I've modded If you want

Qeemi, if you look at the original EPM thread, the array length was increased from 3 in com\android\internal\policy\impl\GlobalActions.smali
Code:
const/4 v0, 0x3
new-array v0, v0, [Lcom/android/internal/policy/impl/GlobalActions$Action;
In this guide, the indexer for the v0 needs to be increased as well as follows:
Code:
const/4 v11, 0x4 # change 0x4 to 0x5
Further down the file we see this for the SGY:
Code:
:cond_0
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
Having said so, please check the indexer for the v0 array and increase its value by 1.
I hope that fixes it for you. Give me a feedback if it works. So I can update this thread.

bumslayer said:
Qeemi, if you look at the original EPM thread, the array length was increased from 3 in com\android\internal\policy\impl\GlobalActions.smali
Code:
const/4 v0, 0x3
new-array v0, v0, [Lcom/android/internal/policy/impl/GlobalActions$Action;
In this guide, the indexer for the v0 needs to be increased as well as follows:
Code:
const/4 v11, 0x4 # change 0x4 to 0x5
Further down the file we see this for the SGY:
Code:
:cond_0
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
Having said so, please check the indexer for the v0 array and increase its value by 1.
I hope that fixes it for you. Give me a feedback if it works. So I can update this thread.
Click to expand...
Click to collapse
I have:
Code:
const/4 v11, 0x5
And
Code:
:cond_f8
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
So what I need to increase?

Qeemi said:
I have:
Code:
const/4 v11, 0x5
And
Code:
:cond_f8
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
So what I need to increase?
Click to expand...
Click to collapse
Do you mean your v11 is already 0x5 by default?
Let me take a peek at your GlobalActions.smali and GlobalActions$SinglePressAction.smali.

bumslayer said:
Try it bro. Just make a nandroid backup first.
Click to expand...
Click to collapse
Lolz, i am not even having the phone , just willing to try that>>>>>>>> K Will check that shortly!!!:laugh:

Up for qeemi.
Sent from my GT-S5360 using Tapatalk

So, v11 is 0x4 by default:
Code:
const/4 v11, 0x4
And
Code:
:cond_f8
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
by default

Yup. At least on the galaxy y. I also got that vibrating error a while back as you did. And updating v11 fixed it for me.
Sent by the guy inside my phone's toast frame

So I need to change it:
Code:
const/4 v11, 0x4
To:
Code:
const/4[COLOR="Red"] v12[/COLOR], [COLOR="Red"]0x5[/COLOR]
And this:
Code:
:cond_f8
new-array v0, v11, [Lcom/android/internal/policy/impl/GlobalActions$Action;
To this:
Code:
:cond_f8
new-array v0, [COLOR="red"]v12[/COLOR], [Lcom/android/internal/policy/impl/GlobalActions$Action;
Am I right?

No. Just increase the value of v11 as in the guide. If yours was already 0x5 before this mod make it 0x6.
Never change any other variable like v12 you might mess it up.
Sent by the guy inside my phone's toast frame

Dude pm me with your original smali files so I can help u better.
Sent by the guy inside my phone's toast frame

bumslayer said:
No. Just increase the value of v11 as in the guide. If yours was already 0x5 before this mod make it 0x6.
Never change any other variable like v12 you might mess it up.
Sent by the guy inside my phone's toast frame
Click to expand...
Click to collapse
I changed:
Code:
const/4 v11, 0x4
To:
Code:
const/4 v11, 0x5
And doesn't not work.

Send me your modified smali files and the originals so i can compare and possibly fix it.
Sent by the guy inside my phone's toast frame

[MOD][GUIDE] SecMms.apk TouchWiz Mods | For Galaxy Note 3 | December 19, 2013

Hello to all Developers and XDA members! I have come here to give you a couple of guides on how to enable a bunch of the Stock Messaging App "SecMms" Mods and other good stuff so here is how you can do it!
What Is Required...
★ First you need to have experience and know how to decompile/recompile apks with Apktools, apkmanager, smali, and baksmali
★ Have 7-zip installed onto your computer/laptop
★ Make sure you have Notepad++ also installed!
★HOW TO ENABLE GROUP MESSAGING★
WHAT DOES THIS MOD DO: This mod will let you enable group messaging in the stock messaging app.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
TO ENABLE GROUP MESSAGING...
SEARCH FOR:
Code:
[COLOR="Green"].method public static getEnableGroupMessage()Z[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getEnableGroupMessage()Z[/COLOR]
.registers 3
.prologue
[COLOR="Red"]const/4 v0, 0x0[/COLOR]
.line 3378
invoke-static {}, Lcom/android/mms/MmsConfig;->getCMASProvider()I
move-result v1
const/4 v2, 0x3
if-ne v1, v2, :cond_9
.line 3382
:cond_8
:goto_8
return v0
.line 3380
:cond_9
invoke-static {}, Lcom/android/mms/MmsConfig;->getEnableMmsTransactionCustomize4Korea()Z
move-result v1
if-nez v1, :cond_8
.line 3382
[COLOR="Red"]sget-boolean v0, Lcom/android/mms/MmsConfig;->sEnableGroupMms:Z[/COLOR]
goto :goto_8
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableGroupMessage()Z[/COLOR]
.registers 3
.prologue
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
.line 3378
invoke-static {}, Lcom/android/mms/MmsConfig;->getCMASProvider()I
move-result v1
const/4 v2, 0x3
if-ne v1, v2, :cond_9
.line 3382
:cond_8
:goto_8
return v0
.line 3380
:cond_9
invoke-static {}, Lcom/android/mms/MmsConfig;->getEnableMmsTransactionCustomize4Korea()Z
move-result v1
if-nez v1, :cond_8
.line 3382
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
goto :goto_8
.end method
NOW SEARCH FOR:
Code:
[COLOR="Green"].method public static getEnableNGMGroupMessage()Z[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getEnableNGMGroupMessage()Z[/COLOR]
.registers 1
.prologue
.line 1115
[COLOR="Red"]const/4 v0, 0x0[/COLOR]
return v0
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableNGMGroupMessage()Z[/COLOR]
.registers 1
.prologue
.line 1115
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
return v0
.end method
Once done save your changes, now go to:
smali/com/android/mms/ui/MessagingPreferenceActivity.smali
Click to expand...
Click to collapse
Now open up "MessagingPreferenceActivity.smali" with your notepad++ for editing.
For this part of the guide what i have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely which is the "invoke-direct" line which has "removePreference" in it:
SEARCH FOR:
Code:
[COLOR="Green"]const-string v1, "pref_key_mms_group_mms"[/COLOR]
Here is what it should look like, Now remove what you see in RED:
Code:
.line 709
:cond_8b
[COLOR="Green"]const-string v1, "pref_key_mms_group_mms"[/COLOR]
invoke-virtual {p0, v1}, Lcom/android/mms/ui/MessagingPreferenceActivity;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v1
[COLOR="Red"]invoke-direct {p0, v0, v1}, Lcom/android/mms/ui/MessagingPreferenceActivity;->removePreference(Landroid/preference/PreferenceGroup;Landroid/preference/Preference;)V[/COLOR]
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!
★HOW TO ENABLE SAVE / RESTORE★
WHAT DOES THIS MOD DO: This mod will let you enable the save/restore feature so you can backup/restore any of your text/mms messages using the stock messaging app.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, And what you see in "BLUE" is the line you have to make changes to:
TO ENABLE THE SAVE / RESTORE FEATURE...
FIND:
Code:
[COLOR="Green"].method public static getEnableSaveRestoreSDCardMessage()Z[/COLOR]
.registers 1
.prologue
.line 923
const/4 v0, 0x0
return v0
.end method
NOW CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableSaveRestoreSDCardMessage()Z[/COLOR]
.registers 1
.prologue
.line 923
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
return v0
.end method
Once done save your changes, now go to:
smali/com/android/mms/ui/MessagingPreferenceActivity.smali
Click to expand...
Click to collapse
Now open up "MessagingPreferenceActivity.smali" with your notepad++ for editing.
For this part of the guide what i have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely which is the "invoke-direct" line which has "removePreference" in it:
SEARCH FOR:
Code:
[COLOR="Green"]const-string v11, "pref_key_sms_restore"[/COLOR]
Here is what it should look like, Now remove what you see in RED:
Code:
[COLOR="Green"]const-string v11, "pref_key_sms_restore"[/COLOR]
invoke-virtual {p0, v11}, Lcom/android/mms/ui/MessagingPreferenceActivity;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v11
[COLOR="Red"]invoke-direct {p0, v10, v11}, Lcom/android/mms/ui/MessagingPreferenceActivity;->removePreference(Landroid/preference/PreferenceGroup;Landroid/preference/Preference;)V[/COLOR]
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!
★HOW TO ENABLE SCHEDULED MESSAGING★
WHAT DOES THIS MOD DO: This mod will let you enable the scheduled messaging feature so you can schedule a time for text messages so the message can be send at the time that you set it to using the stock messaging app.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, And what you see in "BLUE" is the line you have to make changes to:
TO ENABLE SCHEDULED MESSAGING...
FIND:
Code:
[COLOR="Green"].method public static getEnableScheduledMessage()Z[/COLOR]
.registers 1
.prologue
.line 1047
const/4 v0, 0x0
return v0
.end method
NOW CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableScheduledMessage()Z[/COLOR]
.registers 1
.prologue
.line 1047
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
return v0
.end method
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!
★SMS 1000/UNLIMITED RECIPIENT LIMIT★
WHAT DOES THIS MOD DO: This mod will let you send your message to more than 1000 people at the same time.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"].method public static getRecipientLimit()I[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getRecipientLimit()I[/COLOR]
.registers 1
.prologue
.line 762
[COLOR="Red"]sget v0, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
return v0
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getRecipientLimit()I[/COLOR]
.registers 1
.prologue
.line 762
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
return v0
.end method
NOW SEARCH FOR:
Code:
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
NOW REMOVE:
Code:
.line 167
const/16 v0, 0x280
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageWidthRestrictedMode:I
.line 168
[COLOR="Red"]const/16 v0, 0x14[/COLOR]
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
.line 169
const/16 v0, 0xc8
sput v0, Lcom/android/mms/MmsConfig;->sDefaultSMSMessagesPerThread:I
AND CHANGE TO:
Code:
.line 167
const/16 v0, 0x280
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageWidthRestrictedMode:I
.line 168
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
.line 169
const/16 v0, 0xc8
sput v0, Lcom/android/mms/MmsConfig;->sDefaultSMSMessagesPerThread:I
NOW SEARCH FOR:
.
Code:
[COLOR="Green"]method public static getMaxRecipientLength()I[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getMaxRecipientLength()I[/COLOR]
.registers 1
.prologue
.line 2592
[COLOR="Red"]sget v0, Lcom/android/mms/MmsConfig;->sMaxRecipientLength:I[/COLOR]
return v0
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getMaxRecipientLength()I[/COLOR]
.registers 1
.prologue
.line 2592
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
return v0
.end method
NOW SEARCH FOR:
Code:
[COLOR="Green"].method public static getMmsMaxRecipient()I[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getMmsMaxRecipient()I[/COLOR]
.registers 1
.prologue
.line 2847
[COLOR="Red"]sget v0, Lcom/android/mms/MmsConfig;->sMmsRecipientLimit:I[/COLOR]
return v0
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getMmsMaxRecipient()I[/COLOR]
.registers 1
.prologue
.line 2847
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
return v0
.end method
NOW SEARCH FOR:
Code:
[COLOR="Green"]sput v12, Lcom/android/mms/MmsConfig;->sMaxRecipientLength:I[/COLOR]
ABOVE THIS SAME LINE YOU HAVE TO ADD A NEW LINE WHICH IS IN BLUE:
Code:
.line 1811
const-string v12, "CscFeature_Message_MaxRecipientLengthAs"
invoke-virtual {v1, v12}, Lcom/sec/android/app/CscFeature;->getInteger(Ljava/lang/String;)I
move-result v12
[COLOR="Blue"]const/16 v12, 0x3e8[/COLOR]
[COLOR="Green"]sput v12, Lcom/android/mms/MmsConfig;->sMaxRecipientLength:I[/COLOR]
.line 1812
sget v12, Lcom/android/mms/MmsConfig;->sMinRecipientLength:I
NOW SEARCH FOR:
Code:
[COLOR="Green"]sput v1, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
ABOVE THIS SAME LINE YOU HAVE TO ADD A NEW LINE WHICH IS IN BLUE:
Code:
.line 2121
const-string v1, "pref_key_max_recipient"
invoke-interface {v0, v1, v4}, Landroid/content/SharedPreferences;->getInt(Ljava/lang/String;I)I
move-result v1
[COLOR="Blue"]const/16 v1, 0x3e8[/COLOR]
[COLOR="Green"]sput v1, Lcom/android/mms/MmsConfig;->sRecipientLimit:I[/COLOR]
.line 2122
const-string v1, "Mms/MmsConfig"
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!

★HOW TO DISABLE THE SMS TO MMS AUTO-CONVERSION★
WHAT DOES THIS MOD DO: This mod will let you type very long text messages and it won't automatically convert it into MMS.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
NOW REMOVE:
Code:
.line 176
sput-boolean v3, Lcom/android/mms/MmsConfig;->sAllowAttachAudio:Z
.line 179
[COLOR="Red"]const/4 v0, 0x4[/COLOR]
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
AND CHANGE TO:
Code:
.line 176
sput-boolean v3, Lcom/android/mms/MmsConfig;->sAllowAttachAudio:Z
.line 179
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
[COLOR="Green"]sput v0, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
NOW SEARCH FOR:
Code:
[COLOR="Green"].method public static getSmsToMmsTextThreshold()I[/COLOR]
AND REMOVE:
Code:
[COLOR="Green"].method public static getSmsToMmsTextThreshold()I[/COLOR]
.registers 1
.prologue
.line 691
[COLOR="Red"]sget v0, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
return v0
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getSmsToMmsTextThreshold()I[/COLOR]
.registers 1
.prologue
.line 691
[COLOR="Blue"]const/16 v0, 0x3e8[/COLOR]
return v0
.end method
NOW SEARCH FOR:
Code:
[COLOR="Green"]sput v1, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
ABOVE THIS SAME LINE YOU HAVE TO ADD A NEW LINE WHICH IS IN BLUE:
Code:
.line 2116
const-string v1, "pref_key_threshold"
const/4 v2, 0x4
invoke-interface {v0, v1, v2}, Landroid/content/SharedPreferences;->getInt(Ljava/lang/String;I)I
move-result v1
[COLOR="Blue"]const/16 v1, 0x3e8[/COLOR]
[COLOR="Green"]sput v1, Lcom/android/mms/MmsConfig;->sSmsToMmsTextThreshold:I[/COLOR]
.line 2117
const-string v1, "Mms/MmsConfig"
Once done now save changes, Recompile your SecMms.apk and that's it you are now DONE!!!
★HOW TO CHANGE THE MESSAGING TIME STAMPS TO ITS ORIGINAL TIME★
WHAT DOES THIS MOD DO: This mod will show the exact sent time of received messages, not the moment when you actually received it on your phone.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/transaction/SmsReceiverService.smali
Click to expand...
Click to collapse
Now open up "SmsReceiverService.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"]invoke-static {}, Ljava/lang/System;->currentTimeMillis()J[/COLOR]
THIS SAME LINE THAT YOU HAVE JUST LOOKED FOR, IS ALSO THE LINE YOUR GOING TO HAVE TO REMOVE WHICH SHOULD LOOK LIKE THIS:
Code:
const-string v3, "address"
invoke-virtual {p1}, Landroid/telephony/SmsMessage;->getDisplayOriginatingAddress()Ljava/lang/String;
move-result-object v4
invoke-virtual {v1, v3, v4}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/String;)V
goto/16 :goto_43
.line 2640
:cond_14f
const-string v3, "date"
[COLOR="Red"]invoke-static {}, Ljava/lang/System;->currentTimeMillis()J[/COLOR]
move-result-wide v4
invoke-static {v4, v5}, Ljava/lang/Long;->valueOf(J)Ljava/lang/Long;
move-result-object v4
invoke-virtual {v1, v3, v4}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/Long;)V
goto/16 :goto_56
.end method
AND THEN CHANGE IT TO THIS:
Code:
const-string v3, "address"
invoke-virtual {p1}, Landroid/telephony/SmsMessage;->getDisplayOriginatingAddress()Ljava/lang/String;
move-result-object v4
invoke-virtual {v1, v3, v4}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/String;)V
goto/16 :goto_43
.line 2640
:cond_14f
const-string v3, "date"
[COLOR="Blue"]invoke-virtual {p1}, Landroid/telephony/SmsMessage;->getTimestampMillis()J[/COLOR]
move-result-wide v4
invoke-static {v4, v5}, Ljava/lang/Long;->valueOf(J)Ljava/lang/Long;
move-result-object v4
invoke-virtual {v1, v3, v4}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/Long;)V
goto/16 :goto_56
.end method
NOW SEARCH FOR THE SAME LINE AGAIN:
Code:
[COLOR="Green"]invoke-static {}, Ljava/lang/System;->currentTimeMillis()J[/COLOR]
THIS SAME LINE THAT YOU HAVE JUST LOOKED FOR, IS ALSO THE LINE YOUR GOING TO HAVE TO REMOVE WHICH SHOULD LOOK LIKE THIS:
Code:
const-string v8, "address"
const-string v9, "CBmessages"
invoke-static {v9}, Ljava/lang/String;->valueOf(Ljava/lang/Object;)Ljava/lang/String;
move-result-object v9
invoke-virtual {v7, v8, v9}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/String;)V
.line 2948
const-string v8, "date"
[COLOR="Red"]invoke-static {}, Ljava/lang/System;->currentTimeMillis()J[/COLOR]
move-result-wide v10
invoke-static {v10, v11}, Ljava/lang/Long;->valueOf(J)Ljava/lang/Long;
move-result-object v9
invoke-virtual {v7, v8, v9}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/Long;)V
.line 2949
const-string v8, "protocol"
THEN CHANGE IT TO THIS:
Code:
const-string v8, "address"
const-string v9, "CBmessages"
invoke-static {v9}, Ljava/lang/String;->valueOf(Ljava/lang/Object;)Ljava/lang/String;
move-result-object v9
invoke-virtual {v7, v8, v9}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/String;)V
.line 2948
const-string v8, "date"
[COLOR="Blue"]invoke-virtual {v0}, Landroid/telephony/gsm/CbMessage;->getTimestampMillis()J[/COLOR]
move-result-wide v10
invoke-static {v10, v11}, Ljava/lang/Long;->valueOf(J)Ljava/lang/Long;
move-result-object v9
invoke-virtual {v7, v8, v9}, Landroid/content/ContentValues;->put(Ljava/lang/String;Ljava/lang/Long;)V
.line 2949
const-string v8, "protocol"
NOTE: There should be more than two invoke-static {}, Ljava/lang/System;->currentTimeMillis()J, the ones you will be looking for will be under the "date" const-strings. First change will have the "address" const-string in it's code. The second change will have the "address" and also the "CBmessages" in it's code.
Once done now save changes, Recompile your SecMms.apk and that's it you are now DONE!!!
★INCREASE THE SMS LIMIT PER HOUR★
WHAT DOES THIS MOD DO: This mod will increase the SMS hour limit to 1000.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/util/RateController.smali
Click to expand...
Click to collapse
Now open up "RateController.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"].field private static final RATE_LIMIT:I = 0x64[/COLOR]
IN THIS SAME EXACT LINE REMOVE:
Code:
[COLOR="Green"].field private static final RATE_LIMIT:I =[/COLOR] [COLOR="Red"]0x64[/COLOR]
AND CHANGE IT TO:
Code:
[COLOR="Green"].field private static final RATE_LIMIT:I =[/COLOR] [COLOR="Blue"]0x3e8[/COLOR]
NOW SEARCH FOR:
Code:
[COLOR="Green"]const/16 v1, 0x64[/COLOR]
AND CHANGE IT TO:
Code:
[COLOR="Green"]const/16 v1,[/COLOR][COLOR="Blue"]0x3e8[/COLOR]
The value that you see is in hexadecimal format, so 0x64 = "100". So we changed it to 0x3e8 which in hexadecimal format means "1000". Now save your changes, recompile the SecMms.apk and DONE!!!
★HOW TO ENABLE SPLIT-VIEW MODE ON/OFF TOGGLE★
WHAT DOES THIS MOD DO: This mod will let you enable split view on landscape screen so you can see the contacts lists of the people who messaged you while looking at your text at the same time.
STEP 1
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/ui/MessagingPreferenceActivity.smali
Click to expand...
Click to collapse
Now open up "MessagingPreferenceActivity.smali" with your notepad++ for editing.
For this part of the guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely which is the "invoke-direct" line which has "removePreference" in it:
SEARCH FOR:
Code:
[COLOR="Green"]const-string v10, "pref_key_split_view"[/COLOR]
Here is what it should look like, Now remove what you see in RED:
Code:
.line 805
[COLOR="Green"]const-string v10, "pref_key_split_view"[/COLOR]
invoke-virtual {p0, v10}, Lcom/android/mms/ui/MessagingPreferenceActivity;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v10
[COLOR="Red"]invoke-direct {p0, v5, v10}, Lcom/android/mms/ui/MessagingPreferenceActivity;->removePreference(Landroid/preference/PreferenceGroup;Landroid/preference/Preference;)V[/COLOR]
.line 807
:cond_76
invoke-static {}, Lcom/android/mms/MmsConfig;->getEnableWapPush()Z
Once done save your changes, now go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"].method public static getEnableSplitMode()Z[/COLOR]
NOW REMOVE:
Code:
[COLOR="Green"].method public static getEnableSplitMode()Z[/COLOR]
.registers 1
.prologue
.line 1072
invoke-static {}, Lcom/android/mms/MmsConfig;->hasLargerThan5inchScreen()Z
move-result v0
if-eqz v0, :cond_8
.line 1073
const/4 v0, 0x1
.line 1075
:goto_7
return v0
:cond_8
[COLOR="Red"]sget-boolean v0, Lcom/android/mms/MmsConfig;->sEnableSplitMode:Z[/COLOR]
goto :goto_7
.end method
AND CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableSplitMode()Z[/COLOR]
.registers 1
.prologue
.line 1072
invoke-static {}, Lcom/android/mms/MmsConfig;->hasLargerThan5inchScreen()Z
move-result v0
if-eqz v0, :cond_8
.line 1073
const/4 v0, 0x1
.line 1075
:goto_7
return v0
:cond_8
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
goto :goto_7
.end method
Now save changes, Recompile your SecMms.apk and that's it you are now DONE! Now you should see the "Split View" Toggle In Your Messaging App Settings!
★HOW TO INCREASE MMS MAX SIZE + INCREASE MMS IMAGE SIZE★
WHAT DOES THIS MOD DO: This mod will increase the MMS Max size to 2048000 bytes and also increase the MMS Image size to 4096x2048 [8.4MP].
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, And what you see in "BLUE" is the line you have to make changes to:
INCREASE MMS MAX SIZE TO 2048000 BYTES...
FIND:
Code:
.line 156
[COLOR="Green"]sput-boolean v3, Lcom/android/mms/MmsConfig;->sMmsWidgetEnabled:Z[/COLOR]
.line 157
const v0, 0x4b000
sput v0, Lcom/android/mms/MmsConfig;->sMaxMessageSize:I
NOW CHANGE TO:
Code:
.line 156
[COLOR="Green"]sput-boolean v3, Lcom/android/mms/MmsConfig;->sMmsWidgetEnabled:Z[/COLOR]
.line 157
[COLOR="Blue"]const v0, 0x1f4000[/COLOR]
sput v0, Lcom/android/mms/MmsConfig;->sMaxMessageSize:I
INCREASE MMS IMAGE SIZE TO 4096x2048 [8.4MP]...
FIND:
Code:
.line 163
[COLOR="Green"]sput-object v4, Lcom/android/mms/MmsConfig;->sEmailGateway:Ljava/lang/String;[/COLOR]
.line 164
sget v0, Lcom/android/mms/MmsConfig;->MAX_IMAGE_HEIGHT:I
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageHeight:I
.line 165
sget v0, Lcom/android/mms/MmsConfig;->MAX_IMAGE_WIDTH:I
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageWidth:I
NOW CHANGE TO:
Code:
.line 163
[COLOR="Green"]sput-object v4, Lcom/android/mms/MmsConfig;->sEmailGateway:Ljava/lang/String;[/COLOR]
.line 164
[COLOR="Blue"]const/16 v0, 0x800[/COLOR]
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageHeight:I
.line 165
[COLOR="Blue"]const/16 v0, 0x1000[/COLOR]
sput v0, Lcom/android/mms/MmsConfig;->sMaxImageWidth:I
Once done now save your changes, Recompile your SecMms.apk and that's it you are now DONE!
★HOW TO DISABLE SMS, MMS, AND EMAIL LOG HISTORY IN CALL LOGS★
WHAT DOES THIS MOD DO: This mod will permanently disable sms, mms, and email log history from your call logs.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/transaction/MessagingNotification.smali
Click to expand...
Click to collapse
Now open up "MessagingNotification.smali" with your notepad++ for editing.
Now for this part of this guide what your going to need to do is search for and remove all of the "invoke-virtual" lines that have "Landroid/content/ContentResolver;->insert(Landroid/net/Uri;Landroid/content/ContentValuesLandroid/net/Uri;" in them, there should be like 4 or 5 of these lines you have to remove/delete. What you see in "RED" is the line you have to search for and also remove/delete completely:
SEARCH FOR:
Code:
[COLOR="Red"]Landroid/content/ContentResolver;->insert(Landroid/net/Uri;Landroid/content/ContentValues;)Landroid/net/Uri;[/COLOR]
Then remove all of the lines from that search command in "RED" it will begin with "invoke-virtual" and end with "Landroid/net/Uri;". Here is an example below and remember what you see in "RED" is the line you have to search for and also remove/delete completely:
EXAMPLE:
Code:
.line 3316
:try_start_14b
sget-object v24, Lcom/android/mms/transaction/MessagingNotification;->LOG_SMS_URI:Landroid/net/Uri;
move-object/from16 v0, p3
move-object/from16 v1, v24
move-object/from16 v2, v23
[COLOR="Red"]invoke-virtual {v0, v1, v2}, Landroid/content/ContentResolver;->insert(Landroid/net/Uri;Landroid/content/ContentValues;)Landroid/net/Uri;[/COLOR]
:try_end_156
.catch Landroid/database/sqlite/SQLiteException; {:try_start_14b .. :try_end_156} :catch_1c2
Once you remove like 4 or 5 of those lines with "Landroid/content/ContentResolver;->insert(Landroid/net/Uri;Landroid/content/ContentValuesLandroid/net/Uri;" in them and there is none left, save your changes, Recompile your SecMms.apk you are now DONE!
★HOW TO ENABLE THE SCREEN ON/OFF TOGGLE ★
WHAT DOES THIS MOD DO: This mod will let you enable the Screen on/off toggle so you will have a toggle to enable/disable the notification backlight when receiving text/mms messages using the stock messaging app.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, And what you see in "BLUE" is the line you have to make changes to:
TO ENABLE THE SCREEN ON/OFF TOGGLE FEATURE...
FIND:
Code:
[COLOR="Green"].method public static getEnableNotificationBacklight()Z[/COLOR]
.registers 1
.prologue
.line 1245
sget-boolean v0, Lcom/android/mms/MmsConfig;->sEnableNotificationBacklight:Z
return v0
.end method
NOW CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableNotificationBacklight()Z[/COLOR]
.registers 1
.prologue
.line 1245
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
return v0
.end method
Once done save your changes, now go to:
smali/com/android/mms/ui/MessagingPreferenceActivity.smali
Click to expand...
Click to collapse
Now open up "MessagingPreferenceActivity.smali" with your notepad++ for editing.
For this part of the guide what i have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely which is the "invoke-direct" line which has "removePreference" in it:
SEARCH FOR:
Code:
[COLOR="Green"]const-string v10, "pref_key_backlight"[/COLOR]
Here is what it should look like, Now remove what you see in RED:
Code:
.line 839
[COLOR="Green"]const-string v10, "pref_key_backlight"[/COLOR]
invoke-virtual {p0, v10}, Lcom/android/mms/ui/MessagingPreferenceActivity;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v10
[COLOR="Red"]invoke-direct {p0, v2, v10}, Lcom/android/mms/ui/MessagingPreferenceActivity;->removePreference(Landroid/preference/PreferenceGroup;Landroid/preference/Preference;)V[/COLOR]
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!
★HOW TO DISABLE THE SMS TO MMS AUTO-CONVERSION FOR EMOJI★
WHAT DOES THIS MOD DO: This mod will let you type emoji and it won't automatically convert it into MMS.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/ui/ComposeMessageFragment.smali
Click to expand...
Click to collapse
Now open up "ComposeMessageFragment.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
invoke-virtual/range {v19 .. v20}, Lcom/android/mms/data/WorkingMessage;->setEmojiRequiresMms(Z)V
SEARCH FOR THIS TWICE SINCE THERE ARE TWO OF THESE SAME GREEN LINES AND MAKE THE SAME CHANGES THAT YOU SEE IN BLUE!
NOW REMOVE:
Code:
.line 1403
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/mms/ui/ComposeMessageFragment;->mWorkingMessage:Lcom/android/mms/data/WorkingMessage;
move-object/from16 v19, v0
const/16 v20, 0x1
[COLOR="Red"]invoke-virtual/range {v19 .. v20}, Lcom/android/mms/data/WorkingMessage;->setEmojiRequiresMms(Z)V[/COLOR]
AND CHANGE TO:
Code:
.line 1403
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/mms/ui/ComposeMessageFragment;->mWorkingMessage:Lcom/android/mms/data/WorkingMessage;
move-object/from16 v19, v0
const/16 v20, 0x1
[COLOR="Blue"]invoke-static {}, Lcom/android/mms/MmsConfig;->getEnableEmoji()Z[/COLOR]
Once done now save changes, Recompile your SecMms.apk and that's it you are now DONE!!!
★HOW TO ENABLE FOLDER VIEW MODE★
WHAT DOES THIS MOD DO: This mod will let you enable the folder view mode feature which will let you see messages in a different way with a inbox, sentbox, outbox, draftbox, and push message folder category.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/MmsConfig.smali
Click to expand...
Click to collapse
Now open up "MmsConfig.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, And what you see in "BLUE" is the line you have to make changes to:
TO ENABLE FOLDER VIEW MODE...
FIND:
Code:
[COLOR="Green"].method public static getEnableFolderView()Z[/COLOR]
.registers 1
.prologue
.line 2605
sget-boolean v0, Lcom/android/mms/MmsConfig;->sEnableFolderView:Z
return v0
.end method
NOW CHANGE TO:
Code:
[COLOR="Green"].method public static getEnableFolderView()Z[/COLOR]
.registers 1
.prologue
.line 2605
[COLOR="Blue"]const/4 v0, 0x1[/COLOR]
return v0
.end method
Once done now save changes, Recompile your SecMms.apk and that's it your DONE!!!

reserved again...

another one just in case...

This was originally posted in the N900T T-Mobile Galaxy Note 3 Thread By Me Over Here --> Click Here. It will also work for all Samsung Galaxy Note 3 variants so ENJOY!

Can't wait to see these mods on the sprint version. Thanks for the hard work.
My Beast Note 3

The most important mod bro is to remove the stupid "message received confirmation" ringtone which replicates the same "incoming message" ringtone!
This is plain stupid and annoying!

OP updated! New mod "HOW TO ENABLE THE SCREEN ON/OFF TOGGLE".

Is it possible to add a mod for a quick reply popup + a preview of the message, that would be brilliant.

Hi and thanks for this work you are ?
Envoyé de mon SM-N9005 en utilisant Tapatalk

tarekkkkk said:
Is it possible to add a mod for a quick reply popup + a preview of the message, that would be brilliant.
Click to expand...
Click to collapse
This this this this this!!!!
Wondering how you found all of these patches?

tarekkkkk said:
Is it possible to add a mod for a quick reply popup + a preview of the message, that would be brilliant.
Click to expand...
Click to collapse
Yes
Sent from my SM-N900T

Is there a way to increase the MMS size past 2MB?

wow wow wow great work!!!

Jovy23 thanks for this great guide.
I used the T-Mobile guide for the Verizon s4. Fantastic guide.
As this one, but my search didn't show this one till now.
I was also able to get message blocking to work as well.
I could share the info I found if anyone is interested..
Thanks again
Sent from my SCH-I545 using Tapatalk

SecMms.apk
Hi jovy23
Is it possible to change the font and font color of my mms (on Galaxy s2) without changing the menu or system fonts?
Thank you

★HOW TO DISABLE THE SMS TO MMS AUTO-CONVERSION WITH EMOJI★
WHAT DOES THIS MOD DO: This mod will let you type emoji and it won't automatically convert it into MMS.
★ Go into your system/app folder and take out your "SecMms.apk"
★ Then use one of the applications such as apktools or baksmali and then use the commands to decompile the SecMms.apk
★ Once you have decompiled the SecMms.apk, go to:
smali/com/android/mms/ui/ComposeMessageFragment.smali
Click to expand...
Click to collapse
Now open up "ComposeMessageFragment.smali" with your notepad++ for editing.
Now for this part of this guide what I have highlighted in "GREEN" text is what you have to find using Notepad++, What you see in "RED" is the line you have to remove/delete completely, And also what you see in "BLUE" is the line you have to make changes to:
SEARCH FOR:
Code:
[COLOR="Green"]invoke-virtual/range {v19 .. v20}, Lcom/android/mms/data/WorkingMessage;->setEmojiRequiresMms(Z)V[/COLOR]
THIS FOR 2 TIMES!
NOW REMOVE:
Code:
.line 1403
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/mms/ui/ComposeMessageFragment;->mWorkingMessage:Lcom/android/mms/data/WorkingMessage;
move-object/from16 v19, v0
const/16 v20, 0x1
[COLOR="Red"]invoke-virtual/range {v19 .. v20}, Lcom/android/mms/data/WorkingMessage;->setEmojiRequiresMms(Z)V[/COLOR]
AND CHANGE TO:
Code:
.line 1403
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/mms/ui/ComposeMessageFragment;->mWorkingMessage:Lcom/android/mms/data/WorkingMessage;
move-object/from16 v19, v0
const/16 v20, 0x1
[COLOR="Blue"]invoke-static {}, Lcom/android/mms/MmsConfig;->getEnableEmoji()Z[/COLOR]
Once done now save changes, Recompile your SecMms.apk and that's it you are now DONE!!!
Press THANKS if I help you!

OP updated with two new mods "HOW TO DISABLE THE SMS TO MMS AUTO-CONVERSION FOR EMOJI" and "HOW TO ENABLE FOLDER VIEW MODE".

@jovy23 question brudda,xnote7 has been ported to ATT. the secmms does dot have the group texting enabled. i made the changes but here is my problem!!! with a reboot, the group messaging option does not show up no does it work. now heres when it get tricky, if i do a quick reboot and the devices powers back on the group messaging option shows up under settings and it works!!! now u do another full reboot and it disappears, and again the only way to get it to show up is doing a quick reboot. any ideas brudda???

Does Sprint Note 3's have Smali Folders?
I'm not a noob. I'm pretty knowledgeable about Decompiling and etc., but after I do so, I don't have a smli folder... Only assets and res folders, THEN AndroidManifest.XML and apktool.yml
is it possible that my apk for SecMms doesn't have a Smali folder for me to INCREASE THE IMAGE SIZE? PLEASE HELP AND MERRY CHRISTMAS, THANKS IN ADVANCE.

Help understand and manipulate this smali code in a decompiled apk.

I decompiled an apk and would like to add my custom toast message to it. After googling and trying to understand basics of smali and java, I could come up with this. Please correct me where I have gone wrong.
Original code:
.method public Start()Z
.locals 1
const-string v0, "ABC"
invoke-static {v0}, Ljava/lang/System;->loadLibrary(Ljava/lang/StringV
invoke-direct {p0}, Lcom/battlebot/dday/SplashActivity;->init()V
const/4 v0, 0x1
return v0
.end method
Translated to java code:
public Boolean Start() {
final String v0 = "ABC";
java.lang.System.loadLibrary(v0);
com.battlebot.dday.SplashActivity.init()
return true;
}
Where do I find the library ABC? I want to edit the contents of it.
Report