[REQ] [SAMSUNG B7330] App like virtual cursor or sililar - Non-Touchscreen Windows Mobile Other

Please, if anyone can help...
I need useable app like virtual cursor or mouse or whatever that works on Samsung B7330.
Need it to make IGO gps application usuable. I can start it but nothing can be pressed couse of missing touchscreen.
Thank You.

ArrowSat said:
Please, if anyone can help...
I need useable app like virtual cursor or mouse or whatever that works on Samsung B7330.
Need it to make IGO gps application usuable. I can start it but nothing can be pressed couse of missing touchscreen.
Thank You.
Click to expand...
Click to collapse
http://www.pocketpcfreeware.com/en/index.php?soft=1707
Press thanks if you like this!

Thank You, but this does not works for iGo.
Very non useable for B7330.
Anything other ?

Related

Working TouchFlo for Universal

http://forum.xda-developers.com/showthread.php?p=1518161#post1518161
Please see the Athena post. It is also being tested on the Uni. (Don't need or intend to double post)
WORKKKKKK
Very Beautifullllllll
i've tried it on my universal, it worked but i didn't like it, so I uninstalled it right away.
renhui said:
i've tried it on my universal, it worked but i didn't like it, so I uninstalled it right away.
Click to expand...
Click to collapse
It's not for everyone's taste. It's kind of a love/hate thing with the cube. Some users are obsessed with it once they have it while others think it's a waste of resources. To each his own. . . But that's why we post this stuff so evryone can decide for themself.
Touch Flo cube is just a flash app?
Sorry for my ignorance, but Touch Flo cube is just a flash app?
If so, how can we configure it?
very nice idea, i doubt i will use it tho. looks good and is easy to set up...but its a bit naff
teixeirabmb said:
Sorry for my ignorance, but Touch Flo cube is just a flash app?
If so, how can we configure it?
Click to expand...
Click to collapse
The HTC Touch Version uses dll's and other hardware/software stuff. IMHO the hardware isn't really key to the interface, just convenient on the actual TOUCH. I've run Wizards, the TMo Wing, an Apache and my Athena with TouchFlo ROMS and/or this flash app. Hardware handles it fine, just with a few small substitutions for not having the bottom area of the HTC Touch's screen available on these other devices.
This version of it is recreated as an Adobe Flash (tm) app. once you install FlashLite, the install the Szabi CubeLauncher you also get a CubeConfig in your programs folder. It is extremely intuitive once you install it and have a play with it. If you have further questions after getting that far, let me know I and I will try to assist you.
teixeirabmb said:
Sorry for my ignorance, but Touch Flo cube is just a flash app?
If so, how can we configure it?
Click to expand...
Click to collapse
Sorry, probably needing glasses...
Did saw cube config
Does it work in WM5?
satanisme said:
Does it work in WM5?
Click to expand...
Click to collapse
Just tried it.. OK it works.
satanisme said:
Just tried it.. OK it works.
Click to expand...
Click to collapse
Thanks for testing and thanks for the reply.
can somebody explain the step to me?thanks
It works but I'd rather it be able to be launched right from "Today" straight away rather than having to launch the alternative flash "Today" first. Anyone able to do that? And I don't seem to be able to remap the "LaunchCube" to a hardware button
you can use THIS:
http://forum.xda-developers.com/showthread.php?t=334965
to map your finger move to open the cube.
Hi lyka,
I've tried it already. But i only managed to remap it to open the flash app from which I have to swipe UP again.
Plus, from my experience from using the Ftouchflo, it kinda screws up the sensitivity of stylus taps -> tap and hold doesn't work in some apps anymore, tapping became tap+move... stuff like that.
It's a great development and I have my utmost respect for Efrost though! Bravo to him!
TouchFLO
Yes, I'm playing with this one as well
Cheers,
Leo
There's another flash cube being worked on with the whole touchflo shebang in mind.
http://forum.xda-developers.com/showthread.php?t=336234

Want to stop TomTom using Windows Button to start

After having installed the HTC cab for TomTom (just the app + one free city map) on my Orbit 2 I noticed that TomTom has hijacked the Windows button.
I've been through every option in the TomTom settings, but can't find a way to stop this.
Can anyone advise a simple way of making my windows button go back to its original purpose (brings up the start menu) - other than uninstalling TomTom (I can work that out for myself!)
Thanks,
Roy.
Try the Settings of WM6 !
Mine is german, so i can´t tell you exactly what to do.
I mean it has to be Menu-Setting-Keys
Key 1 is what is changed by TomTom.
Change this setting to whatever you like.
CouchPotato said:
Try the Settings of WM6 !
Mine is german, so i can´t tell you exactly what to do.
I mean it has to be Menu-Setting-Keys
Key 1 is what is changed by TomTom.
Change this setting to whatever you like.
Click to expand...
Click to collapse
Yeah, in the English version its Start/Settings/Buttons, then change the one that says TomTom to <Start Menu>
thanks
Thank you to both of you.
Exactly what I needed.
HardRoc said:
Yeah, in the English version its Start/Settings/Buttons, then change the one that says TomTom to <Start Menu>
Click to expand...
Click to collapse
Does that work with the Touch Cruise, too? I ask that, because the Touch Cruise has a GPS-Button instead of a Windows button.
PS: I don't own a Windows Mobile phone, but want to buy one in near future.
Yep, curiously the icons for the buttons are for mail and calendar, just like the first two buttons on most WM phones.
HardRoc said:
curiously the icons for the buttons are for mail and calendar, just like the first two buttons on most WM phones.
Click to expand...
Click to collapse
But I want one key to open the Windows Start Menu and one key as OK key. Can I assign them like that?
yes, you can assign any application and some functions without troubles.

HW Keyboard not working in citrix RDP

hi guys,
I am using a citrix ica client as a remote desktop.ANd unfortunately its not accepting the Hardware keyboard strokes at all. Its only accepting virtual keyboard.Can any kind soul tell me how to completely disable the virtual keyboard and use only the hardware keyboard please ?
I tried changing the few roms availabe, but nothing helps.
Suggestions are welcome , as whats the point of not able to use a keyboard in Remote desktop clients ?
vijayvasa
I've just been reading about RDP. It should work if it is install on the phone, not the card, but you can try the opposite, if its not working.
deanjp1 said:
I've just been reading about RDP. It should work if it is install on the phone, not the card, but you can try the opposite, if its not working.
Click to expand...
Click to collapse
I have tried the citrix client with installed on device.
I will try and then will post the feedback.
vj
I'd forgotten about Citrix until reading this thread. I've just installed it and have the same problem - no working hardware keyboard...
I found another program in witch the hardware keyboard doesn't work; iGO8. I Haven't been able to figure out why, thinking it was an iGO8 problem. Now reading Citrix also doesn't work maybe it isn't an iGO prblem after all.
Still searching for a solution; iGO *must* be use in 320*240 mode, and it seems silly not being able to use the hardware keyboard.
I have a good news. The hardware keyboard works in the ica client. I believe the "Enable Palette Device" in the settings did the trick for me.
Ashkhan said:
I have a good news. The hardware keyboard works in the ica client. I believe the "Enable Palette Device" in the settings did the trick for me.
Click to expand...
Click to collapse
Can you kindly tell us which version of rom , that you got this working on ?
VJ
Ashkhan said:
I have a good news. The hardware keyboard works in the ica client. I believe the "Enable Palette Device" in the settings did the trick for me.
Click to expand...
Click to collapse
Hi yaa, I tried with your setting enabled on 1.90.405.1 Uk version official rom and am still unable to make the HW keyboard work in the ica client ? Hope you can tell me your rom version ? Thank you.
vijayvasa said:
Can you kindly tell us which version of rom , that you got this working on ?
VJ
Click to expand...
Click to collapse
Sure.
ica client version: 10.0.57037
ROM: 1.90.401.1 WWE
I played with settings again and unfortunately the previous option indeed doesn't enable the keyboard.
You have to modify the IME settings. Either in global settings or for each server (from the main screen select the remote server, press edit, edit options, set IME settings). Set it to "Disable Client IME" (default is Disable Server IME). Tested it this time
Sorry for the confusion, I enabled more options at the same time.
Just in case anyone else has been having the same problem as me, use Pocket IE to get to the /localaccess page instead of Opera.
le_cactus said:
I found another program in witch the hardware keyboard doesn't work; iGO8. I Haven't been able to figure out why, thinking it was an iGO8 problem. Now reading Citrix also doesn't work maybe it isn't an iGO prblem after all.
Still searching for a solution; iGO *must* be use in 320*240 mode, and it seems silly not being able to use the hardware keyboard.
Click to expand...
Click to collapse
It seems the xT9 software breaks keyboard handling somehow. After cooking a ROM without it iGO8 works fine. I'm sure there must be another way (like with Citrix) but I'm happy now.
Cheers,
Cacti

SortInchKey

Anyone knows how to use this software? It seems very powerful but not sure how to use it. Description is mostly in Japanese.
http://d.hatena.ne.jp/xianon/00000000/
I tried to use it to map hardware keys on at&t Fuze (for HOME and BACK keys).
Thank you for "sharing" this ....
It is actually quite easy to use....
Go to where you save the application (e.g. \program files\SortInchKey)
and there is a "sortInchKeySettings.exe to setup which key to assign
Click SortInchKey.exe once to activate the program twice to de-activate
I can't make "Hold" "Win" to work but "Double" "Win" working fines. Let me know if you find the trick.
Hope that help you.
ThreadMoved
Can you share how you configure in sortinchsetting ?

RetroArch Emulator app

Hello
I just got an asus memo pad 10 (it was cheap at £229 and all I want it for is multimedia consumption really).
I downloaded the RetroArch app to emulate "command and conquer red alert" from the playstation 1.
For anyone who hasnt played it, you control everything in the game by clicking with a cursor. With the emulator, it has a gamepad overlay with the direction keys and buttons etc. Problem is the direction keys are a bit of a nightmare. Is there any way I can make this app touch sensitive? So i can just press things on the game instead of using the virtual gamepad?
Or are there any other emulators that would let me do this? I know its possible as Ive seen a guy on youtube do it, problem is, everything is in german so I cant understand a word of it!
Any help would be much appreciated.
Thanks
anyone?
adamski88 said:
Hello
I just got an asus memo pad 10 (it was cheap at £229 and all I want it for is multimedia consumption really).
I downloaded the RetroArch app to emulate "command and conquer red alert" from the playstation 1.
For anyone who hasnt played it, you control everything in the game by clicking with a cursor. With the emulator, it has a gamepad overlay with the direction keys and buttons etc. Problem is the direction keys are a bit of a nightmare. Is there any way I can make this app touch sensitive? So i can just press things on the game instead of using the virtual gamepad?
Or are there any other emulators that would let me do this? I know its possible as Ive seen a guy on youtube do it, problem is, everything is in german so I cant understand a word of it!
Any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
http://forum.themaister.net/
their official forums. better luck there!
kazemitsui said:
http://forum.themaister.net/
their official forums. better luck there!
Click to expand...
Click to collapse
im still waiting on my account being approved

Categories

Resources