Related
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.
TheEmpyre said:
I have searched the above linked thread and cannot determine how to generate a custom recovery partition
Click to expand...
Click to collapse
You don't need to "generate" anything, not sure where you got that terminology from. Just install Goomanager from the Play Store and use that to install TWRP recovery.
---------- Post added at 09:20 AM ---------- Previous post was at 09:12 AM ----------
TheEmpyre said:
Furthermore, I do not know what "Superuser and su" is referencing.
Click to expand...
Click to collapse
In plain terms a superuser = a root user. But when discussed here, it usually references the app that manages what other apps have root access.
Superuser is required to perform root functions.
You can obtain the app various ways, all discussed here: http://forum.xda-developers.com/showthread.php?t=1954361
TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
ctennenh said:
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.
Click to expand...
Click to collapse
They are many simple tutorials for rooting but do not know why you guys having hard time. Ok here is
1) You got Android SDK from google + Platform-tools + Google USB Driver -
2) Only for windows - Download htc sync ( It will install necessary htc drivers) - Link
3) Just to check if htc drivers installed properly , open "C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists).
4) In command window type " adb devices" and see output - If you get output then htc drivers installed properly.
You can skip step 3 and step 4 - These steps are only for verification
5) Goto [ROOT] HTC One X AT&T 2.20 Firmware - X-Factor root exploit and follow the instructions there.
6) Once you successfully root your device using above exploit then goto - [How To] Flash Custom recovery and ROMS after 2.20 root complete the steps to flash custom recovery and if you want to flash ROMS
7) To unlock BOOT LOADER use this link - [INDEX] AT&T/ROGERS One X Resources Compilation Roll-Up , follow the instructions under " BOOTLOADER UNLOCK, SUPER CID, AND S-OFF"
You can also goto this link - [ROOT][2.20] One XL Bootloader unlock & Root guide By XsMagical - Very nice tutorial, if you find above links difficult to follow
Note* : During exploit or flashing recovery they talk about using fastboot commands, In order to execute them you need goto C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists) and then execute the commands ..
Advice - Do not flash any roms apart from xda
Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.
ctennenh said:
Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.
Click to expand...
Click to collapse
No problem.
Regarding step 1)
1) Download Android SDK from here {For Windows}
2) Download java you need it - here
Thank you all for helping gather some resources for me that I know are up to date etc. - Thankfully I do know a few unix commands so that I can navigate the command prompt aspects...I'm sure these threads get annoying so thank you very much for getting a new-to-root user up and running. I'll try this all later this evening and throw an update to let you all know how it goes -- hopefully no "bricked my phone" thread in the future
Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.
Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium
InflatedTitan said:
Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?
TheEmpyre said:
Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.
Click to expand...
Click to collapse
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
TheEmpyre said:
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?
Click to expand...
Click to collapse
yes that;s correct you may wanna backup your sd card 1st as well and do a full wipe before flashing the rom.
Just in case your not familiar with fastboot, the command is fastboot flash boot boot.img
Sent from my HTC One XL using xda premium
Crappyvate said:
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
Click to expand...
Click to collapse
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Edit: Just saw you all beat me to it, thanks all, will get back to you after I am running a ROM *crossfingers*
TheEmpyre said:
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Click to expand...
Click to collapse
yes install. you dont need to do it from command prompt, additional reading is always good
even though it was put together a while back this http://forum.xda-developers.com/showthread.php?t=1678308 is a very good guide and covers a lot of things of course you should absolutely start here in redpoint indispensable guide to all the resources available to one xl http://forum.xda-developers.com/showthread.php?t=1671237
happy flashing
Alright Looks like I successfully flashed CM10! I flashed gapps with it at the same time but I have run into a problem -- It keeps telling me that all these gapps processes have failed and I have no access to a keyboard! Do I have to reflash gapps?
Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?
TheEmpyre said:
Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?
Click to expand...
Click to collapse
I think u need to flash that backups boot IMG
omario8484 said:
I think u need to flash that backups boot IMG
Click to expand...
Click to collapse
Yes that would make sense, but the problem is A) How do I access that backup's .img file? B) How can I enter bootloader again? It won't let me using Power+Vol Down, no matter how long I hold it for --- unless I need to hold it longer?
You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium
InflatedTitan said:
You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Ok got it, did a factory reset then re-flashed CM10 boot.img...Flashed CM10 BY ITSELF this time, without doing gapps at the same time, rebooted into recovery after CM10 rolled up, then flashed gapps alone, everything is working smoothly! Now, time to restore my apps
Panicked momentarily, but now I'm back at it.
THANK YOU EVERYONE! Huge ups to all of you for helping a noob find his way
I was running VenomOneS 1.2.0 and decided to have a play. I tried to install Paranoid Android v2.54 but once I had I got stuck at the boot screen for said ROM.
My One S looks like this;
HBOOT - 1.13.0000
Radio - 0.16.31501S
Running a windows computer.
I saw a post regarding the need to install a new boot.img but i've no idea which one or where to find it.
Basically I made a boo boo and would of posted this to the Paranoid Android thread but as a new user i'm only allowed in the people who break things thread.
Any help would be greatly appreaciated.
Mr Scruffs said:
I was running VenomOneS 1.2.0 and decided to have a play. I tried to install Paranoid Android v2.54 but once I had I got stuck at the boot screen for said ROM.
My One S looks like this;
HBOOT - 1.13.0000
Radio - 0.16.31501S
Running a windows computer.
I saw a post regarding the need to install a new boot.img but i've no idea which one or where to find it.
Basically I made a boo boo and would of posted this to the Paranoid Android thread but as a new user i'm only allowed in the people who break things thread.
Any help would be greatly appreaciated.
Click to expand...
Click to collapse
To fix it:
Grab the all in one tool kit from development forum
Open the zip file for the Paranoid rom and copy the boot.img.
Then paste the boot.img file where the tool kit can see it. This would be the /data/kernel folder of wherever you placed the toolkit.
The just hit use the flash kernel command in the toolkit.
Reboot
When you're back up and running get this tool so you can do it from the phone next time.
http://forum.xda-developers.com/showthread.php?t=1954121
dc211 said:
To fix it:
Grab the all in one tool kit from development forum
Open the zip file for the Paranoid rom and copy the boot.img.
Then paste the boot.img file where the tool kit can see it. This would be the /data/kernel folder of wherever you placed the toolkit.
The just hit use the flash kernel command in the toolkit.
Reboot
When you're back up and running get this tool so you can do it from the phone next time.
http://forum.xda-developers.com/showthread.php?t=1954121
Click to expand...
Click to collapse
Thankyou very much for your help.
The description was fantastic and had the issue fixed within minutes.
I'll try not to break things again.
I hope there is still people on this mytouch forum lol? I need help rooting my mytouch 4g slide its on kitkat I looked around how to on kitkat first time tryna root. Also any help out there that can guide me to not brickin it or if other steps need to be takin because of kitkat?
Ive read 20+ pages so far and this is frustrating lol I want same rom just want to be perm rooted to be able to mount to sd card screenshot and use other rooted apps.
SOEBOMB said:
Ive read 20+ pages so far and this is frustrating lol I want same rom just want to be perm rooted to be able to mount to sd card screenshot and use other rooted apps.
Click to expand...
Click to collapse
Did you lose superuser, or did the bootloader relock?
If it's the former, you could try this:
...you could try pushing su to the device with adb (depends on how you lost root):
Code:
adb shell mount -o rw,remount -t ext4 /dev/block/platform/msm_sdcc.1/by-name/system /system
adb push su /system/xbin/
adb shell chmod 06755 /system/xbin/su
... with this file (extracted).
Source (with mount point changed)
Click to expand...
Click to collapse
joel.maxuel said:
Did you lose superuser, or did the bootloader relock?
If it's the former, you could try this:
Click to expand...
Click to collapse
Thanks fpr the reply I never had root nor have I rooted a phone noob here lol ive read also that kitkat needs to be downgraded.that true to root?
SOEBOMB said:
Thanks fpr the reply I never had root nor have I rooted a phone noob here lol ive read also that kitkat needs to be downgraded.that true to root?
Click to expand...
Click to collapse
I don't think it's possible to be able to install a ROM without the bootloader unlocked (prerequisite for CWM, and in turn KitKat ROM). Unless you got the phone with KitKat (eBay special?) but no root (which would be weird for a seller to do), you must have lost root along the way (it can happen).
In either case, we are not talking about the bootloader. The way to check that though, is to turn on the device while holding the Vol-Dn button. This will take you into fastboot. If it says ** RELOCKED ** up top, then you're in trouble. If it says ** UNLOCKED ** or * JuoPunutbear *, it looks like you just need superuser reinstalled, and you don't need to downgrade for that.
To do this, download and install the adb binary and drivers (if you're a linux user, all you need to do is an 'apt-get install adb' or whatever your distro uses). Turn on the device normally, go into Developer under settings (may need to go into About phone first and tap Build Number 7 or 8 times for Developer menu to appear). Turn on USB debugging. Now connect a cable between your device and your PC. Fire up a command prompt on the PC (can be left open after installing ADB, as you want to be in the same folder as it) and type:
Code:
adb devices
If you get a device, and is listed as online, you are ready to enter the commands for the second part, in the order as they appear in my previous post.
If the first command does not work (as I cannot find the appropriate folder on my 10.1 distro), try:
Code:
adb shell mount -o rw,remount -t ext4 /dev/block/mmcblk0p22 /system
Or to see if that folder exists for you first, try:
Code:
adb shell ls /dev/block/platform/msm_sdcc.1/by-name/
If you get a list of partitions, (including system) you should be good to proceed with that command. If not (by-name not found), use the above command. Hope this helps.
Ok looked im on android 2.3.4 and also looked at the boot loader things says locked and I did get it off ebay lmao good call. 1.45.0013 bootloader also
SOEBOMB said:
Ok looked im on android 2.3.4 and also looked at the boot loader things says locked and I did get it off ebay lmao good call. 1.45.0013 bootloader also
Click to expand...
Click to collapse
Okay, so that's Gingerbread, not KitKat.
I used this guide when I did mine (second pin down in the MT4GS Developer forum):
http://forum.xda-developers.com/showthread.php?t=1801106
jjbz said:
Here’s a breakdown of the process:
1. INSTALL HTC DRIVERS ON YOUR PC.
2. INSTALL ADB AND FASTBOOT ON YOUR PC.
3. REGISTER AT HTC DEV.
4. UNLOCK BOOTLOADER THROUGH HTC DEV.
5. INSTALL A CUSTOM RECOVERY.
6. ROOT YOUR DEVICE.
7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).
-PREREQUISITES-
Before getting started, please visit the MT4GS Compendium and read over Section One to learn the XDA Lingo. You really need to know this stuff if you’re going to tinker with the MT4GS.
Also, all information in the guide assumes you are using a Windows PC and a MT4GS with the STOCK ROM AND HBOOT-1.45.0013. If you are not on the Stock ROM, please use Blue6IX’s post “How-To: Restore to Stock.” Be sure to use the latest OTA (1.63.531.2). Once you're all set, let’s begin, shall we?
Disclaimer: I am not responsible for anything that happens to your phone. You assume all risks associated with modifying your phone.
-1. INSTALL HTC DRIVERS ON YOUR PC.-
Install the HTC Drivers on your PC from here.
Before connecting your phone, make sure USB Debugging is enabled (Settings>Applications>Development>USB Debugging).
Tip: to save time later, turn off your phone, hold down Power & Volume Down simultaneously until you reach the bootloader. Use the volume buttons to navigate to FASTBOOT and select it with the power button. Connect your phone via USB and the bootloader should now say FASTBOOT USB mode. Allow your PC to install the required drivers automatically. It may take a few minutes for your PC to search for and install drivers, so be patient.
-2. INSTALL ADB AND FASTBOOT ON YOUR PC.-
Installing ADB and fastboot on your PC is easy. Follow this guide and you’re good to go. To confirm that you have successfully installed ADB and fastboot, connect phone (with USB Debugging enabled) to PC via USB, open command prompt, and type “adb devices”. Your device ID number should be listed. Here are some useful commands for ADB and fastboot.
-3. REGISTER AT HTC DEV.-
Self-explanatory. Visit HTCDev.com and sign up with a valid e-mail address, as you’ll be receiving your Unlock_code.bin from HTC through this e-mail. Use an alternate browser such as IE, Google Chrome, or Mozilla Firefox if HTC Dev doesn’t play nice with your current browser of choice. Personally, I had to switch between Chrome and Firefox to get the HTC Dev website to cooperate.
-4. UNLOCK BOOTLOADER THROUGH HTC DEV.-
Make sure you’re logged in to HTC Dev and follow on-screen instructions to unlock bootloader. FYI, our device is listed as “myTouch 4G Slide (T-Mobile US)”. You can skip HTC’s instructions until step 5 since they're just telling you how to install ADB and fastboot, but you should already have ADB and fastboot installed .
After you finish unlocking the bootloader, the first line in your bootloader should read “*** UNLOCKED ***”.
-5. INSTALL A CUSTOM RECOVERY.-
Download official ClockworkMod Recovery 5.0.2.7 from the ROM Manager website or download another custom recovery from the MT4GS Development section. For instruction purposes, I will assume that you use official CWM Recovery 5.0.2.7. Save the img file to C:\.
Put your phone in bootloader FASTBOOT mode and connect to PC. Go to command prompt on PC and type “fastboot devices”. Once your device ID is listed, type “cd\” to get to “C:\” directory. Then type “fastboot flash recovery recovery-clockwork-5.0.2.7-doubleshot.img”.
After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping.
NOTE: Use volume buttons or trackpad to navigate through CWM Recovery 5.0.2.7. Select items by pressing the trackball. Power button may make your screen go blank and Back button returns you to the previous menu.
-6. ROOT YOUR DEVICE.-
Now that you have a custom recovery, you can flash custom ROMs. These custom ROMs are already rooted with Superuser and binary files.
NOTE: If you are S-ON, installing a custom ICS ROM will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.
HOWEVER, if you want to root the STOCK ROM and/or continue to step 7 to achieve JuopunutBear S-OFF, you’ll have to root the device yourself. This is very simple. Download Superuser ZIP from androidsu.com/superuser. I can only recommend version 3.0.7 efgh because that is the only one I have tested, but newer versions may work.
Place the “Superuser-3.0.7-efgh-signed” on the ROOT of your SD card. Go to CWM Recovery and use “install zip from sdcard” to flash the Superuser zip. If installation aborts or fails the first time, try to flash the zip again until installation is complete. Reboot your phone and check in your apps to see if Superuser app is there. If so, congratulations, you have successfully rooted your stock MT4GS!
-7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).-
Achieving S-OFF will make your life a lot easier if you want to flash custom ROMs, especially ICS ROMs. Follow instructions for JuopunutBear at unlimited.io and check out the JB S-OFF thread for other users’ experiences.
As I said before, if you are S-ON, flashing ICS ROMs will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.
Click to expand...
Click to collapse
For step two, you can use the adb binary I mentioned earlier. Same thing, different location.
As said above, you don't need to do step 7. If you are afraid of potenitally ruining your phone with the "wire trick" I wouldn't bother with the step, just keep in mind when you do put KitKat on your phone, you will have to extract the boot.img from the package, go into the bootloaders fastboot mode and run the following command (from your PC):
Code:
fastboot flash boot boot.img
And you can apparently do this before or after (get CWM to reboot to bootloader) flashing with CWM (which you will need to upgrade to get KitKat) to avoid a bootloop. If that happens, pull the battery, reinsert, then power up into the bootloader (Pwr+Vol-Dn keys).
Ok bud thanks for all ur help so far I just have a few questions sorry 14 hr days dnt help me check in lol. Question 1 if I don't have kitkat y can't.I move apps to my sd card? Question 2 do I need to downgrade. Anything to root? Question 3 y can't I save apps on my sd?
SOEBOMB said:
Ok bud thanks for all ur help so far I just have a few questions sorry 14 hr days dnt help me check in lol. Question 1 if I don't have kitkat y can't.I move apps to my sd card? Question 2 do I need to downgrade. Anything to root? Question 3 y can't I save apps on my sd?
Click to expand...
Click to collapse
...and multitasking makes my responses to the point. I have answered them as they were asked.
1. I cannot remember what stock ROM offered at this point, if they had a Move apps to SD option
2. If your Android Version is truly 2.3.4 then there is nothing to downgrade to. You are on stock Gingerbread. Had your version been 4.4.2 (or anything 4.4), then I can safely say that is KitKat. You will need to root to change that situation.
3. I don't know. As mentioned above, I didn't stay on stock ROM long enough to discover Apps to SD. Have used Link2SD since then, but not in that time frame. Sorry.
joel.maxuel said:
...and multitasking makes my responses to the point. I have answered them as they were asked.
1. I cannot remember what stock ROM offered at this point, if they had a Move apps to SD option
2. If your Android Version is truly 2.3.4 then there is nothing to downgrade to. You are on stock Gingerbread. Had your version been 4.4.2 (or anything 4.4), then I can safely say that is KitKat. You will need to root to change that situation.
3. I don't know. As mentioned above, I didn't stay on stock ROM long enough to discover Apps to SD. Have used Link2SD since then, but not in that time frame. Sorry.
Click to expand...
Click to collapse
Well ima gna try to root it with what u posted I feel a bit better knowing I dont have to donwgrade and all that etc. im gna follow the steps.hopefully ill be posting in a rooted device in the near future lol paperweights this rookie dnt need
Any other tips I should know?
SOEBOMB said:
Any other tips I should know?
Click to expand...
Click to collapse
Be sure to make a backup in Clockwork Mod or whatever custom recovery you install. This will give you the chance to rollback should you encounter any problems swapping to a custom rom.
Alandra said:
Be sure to make a backup in Clockwork Mod or whatever custom recovery you install. This will give you the chance to rollback should you encounter any problems swapping to a custom rom.
Click to expand...
Click to collapse
Prolly not gna flash a rom should I still do a backup I read rooting clears ur whole phone is that true like sd card n all? I domt care for music n etc jus dnt wanna lose my sons photos off my sd
SOEBOMB said:
Prolly not gna flash a rom should I still do a backup I read rooting clears ur whole phone is that true like sd card n all? I domt care for music n etc jus dnt wanna lose my sons photos off my sd
Click to expand...
Click to collapse
Unlocking the bootloader does, yes, wipe your /data partition, but that should be all (besides /cache). If you are concerned about it wiping your MicroSD as well, can always pull the card before getting to that step.
joel.maxuel said:
...and multitasking makes my responses to the point. I have answered them as they were asked.
1. I cannot remember what stock ROM offered at this point, if they had a Move apps to SD option
2. If your Android Version is truly 2.3.4 then there is nothing to downgrade to. You are on stock Gingerbread. Had your version been 4.4.2 (or anything 4.4), then I can safely say that is KitKat. You will need to root to change that situation.
3. I don't know. As mentioned above, I didn't stay on stock ROM long enough to discover Apps to SD. Have used Link2SD since then, but not in that time frame. Sorry.
Click to expand...
Click to collapse
Default Read this before posting. MT4G Slide Compendium
The Almost Complete Compendium for MT4G Slide (Read This before Posting)
Note as of 12/22/2011 the ota update is not rootable (H boot 1.45.0013)
and s-off cannot be obtained. If you updated with s-off it is possible to revert back. Reference thread
Also, people who used HTC unlock and have s-on will have trouble flashing roms that are not gingerbread based.
so i read this on a link is it true i cant root?
SOEBOMB said:
Default Read this before posting. MT4G Slide Compendium
The Almost Complete Compendium for MT4G Slide (Read This before Posting)
Note as of 12/22/2011 the ota update is not rootable (H boot 1.45.0013)
and s-off cannot be obtained. If you updated with s-off it is possible to revert back. Reference thread
Also, people who used HTC unlock and have s-on will have trouble flashing roms that are not gingerbread based.
so i read this on a link is it true i cant root?
Click to expand...
Click to collapse
My H-BOOT is 1.45 as well (1.45.1313 since I went S-OFF) and I had no problem rooting. Probably talking about outdated information, like when everyone rooted their phone with Revolutionary. Rooting is possible, S-OFF is possible (via JuopunutBear). And the last bit about trouble flashing ROMs has to do with having to flash the boot.img file as well because you are still S-ON (please see my earlier post about that).
SOEBOMB said:
Default Read this before posting. MT4G Slide Compendium
The Almost Complete Compendium for MT4G Slide (Read This before Posting)
Note as of 12/22/2011 the ota update is not rootable (H boot 1.45.0013)
and s-off cannot be obtained. If you updated with s-off it is possible to revert back. Reference thread
Also, people who used HTC unlock and have s-on will have trouble flashing roms that are not gingerbread based.
so i read this on a link is it true i cant root?
Click to expand...
Click to collapse
I am also on H-Boot 1.45.0013 and have had no problems rooting and installing custom roms. I am still S-On, which has caused me no issues, but I simply have to use the method in this post to successfully flash a new rom:
http://forum.xda-developers.com/showpost.php?p=22774848&postcount=1
s off toolkit
has anyone used this to root and s-off there mt4gs???
http://forum.xda-developers.com/showthread.php?t=1532809
http://forum.xda-developers.com/show....php?t=1696373
SOEBOMB said:
has anyone used this to root and s-off there mt4gs???
http://forum.xda-developers.com/showthread.php?t=1532809
http://forum.xda-developers.com/showthread.php?t=1696373
Click to expand...
Click to collapse
Cannot say I have. Mind you I'm a linux user so I avoid windows programs where I can.
The second link was broken. I fixed it in the quote. In regard to version 2.0 (first link), the download links have been pulled and the thread closed. Don't bother asking anyone for it. Version 1.0 appears to be still up, although by the looks of the screenshot and changelog, you would be better off following the guide. It's not that difficult.
SOEBOMB said:
Any other tips I should know?
Click to expand...
Click to collapse
Superuser link appears dead. Here is a live one...
I'm searched for an hour tonight, and am probably looking right over it. My phone is currently on 4.4.3 and is very slow to restart. Can someone help me to find a video tutorial on how to flash 4.4.4?
Thanks!!
I did download the 4.4.4 firmware zip file from here. I am very rusty with using the command terminal on my pc though. This is where I'm hoping for a video tutorial.
forum.xda-developers.com/showthread.php?t=2723159&page=4
Are you S-OFF and rooted? Custom ROM and recovery? Stock rooted?
The more info you give about your phones current state the better we can help point you in the right direction.
The Stig 04 said:
Are you S-OFF and rooted? Custom ROM and recovery? Stock rooted?
The more info you give about your phones current state the better we can help point you in the right direction.
Click to expand...
Click to collapse
I'm sorry....yes, I am S-off, and rooted. I currently have a custom ROM on my phone, but my android version is currently 4.4.3
ddodge68 said:
I'm sorry....yes, I am S-off, and rooted. I currently have a custom ROM on my phone, but my android version is currently 4.4.3
Click to expand...
Click to collapse
Cool, just wanted to make sure. There is a video on there from DMX that shows how to flash the firmware. I linked that below. He does it on mac but the commands are the same if you do it on a windows computer. If you open the command window in your fastboot folder (shift+right click, open command window here) you can skip the long command he types at around the 3:40 mark and jump right into the commands at 3:51.
https://www.youtube.com/watch?v=e21qb7iZAOo&feature=youtube&app=desktop
Sorry it took so long to respond, but work calls! If you have any trouble let us know!
The Stig 04 said:
Cool, just wanted to make sure. There is a video on there from DMX that shows how to flash the firmware. I linked that below. He does it on mac but the commands are the same if you do it on a windows computer. If you open the command window in your fastboot folder (shift+right click, open command window here) you can skip the long command he types at around the 3:40 mark and jump right into the commands at 3:51.
https://www.youtube.com/watch?v=e21qb7iZAOo&feature=youtube&app=desktop
Sorry it took so long to respond, but work calls! If you have any trouble let us know!
Click to expand...
Click to collapse
As long as you're being so helpful, again, I've downloaded the zip file from the above link. Do I need any of the other files?
ddodge68 said:
As long as you're being so helpful, again, I've downloaded the zip file from the above link. Do I need any of the other files?
Click to expand...
Click to collapse
You downloaded the 4.4.4 firmware zip (no boot.img, no recovery.img) from Tigerstown thread? Then no, you don't need anything else to update your firmware.
This will only update your firmware. You will be on the same rom with the same recovery and remember to flash it twice as he described it in the instructions.
UNLESS you use the HTC fastboot.exe from here:
http://forum.xda-developers.com/showpost.php?p=56890497&postcount=3
This fastboot version will do everything needed in one flash.
I installed this fastboot version alongside my "normal" fastboot/adb which I use for my other devices and use it for the M8 exclusively.
Hi, all. I'm trying to find a thread that details how to upgrade to the official Android M release on my Nexus 5 that is currently rooted. I've found plenty of threads, but am having the worst time finding anything about getting M on to a rooted N5.
Any help would be great. Thank you.
Whoever posted a poll on this question isn't acting in what I'd consider to be the friendly spirit of the forum. We were all noobs once. I've been using Android for a few years and I still know little compared to the experts in the forum, and if people are going to sneer at my lack of knowledge then it will discourage me from asking questions.
Not nice at all...
---------- Post added at 12:31 PM ---------- Previous post was at 12:24 PM ----------
ggentry,
At the risk of attracting sneers from the more knowledgeable members who prefer the excitement of risking getting it wrong, I recommend that you use Wugfresh's Nexus Root Toolkit - http://www.wugfresh.com/
It is a simply excellent piece of programming which will guide you through the setup of drivers to prepare for flashing. The simple way to upgrade is to lie and tell it that your current ROM is Android 6.0, and then tell it to unroot and flash stock. It will also root again when you've done that. I've been so impressed by it that I've contributed to the developer I think 4 times now, though it's a free application.
If you have adb properly setup and your pc likes to talk to your Nexus 5 [I always have to redo the drivers] - I referenced this guide again http://forum.xda-developers.com/google-nexus-5/general/guide-update-rooted-device-to-5-1-lmy47d-t3050789 to run the update to 6.0 (M).
It's just a simple easy to read post of the fastboot flash commands you have to do.
While a clean install is recommend when moving from 5.X to 6.0 you don't have to.
The two things to note - don't use the Flash-all.bat file nor flash userdata from the factory image [that will wipe your phone].
To root you'll have to use a modified boot.img - I went simple and used Chainfire's boot img from post 1 http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
I advocate doing the steps yourself via adb if you're comfortable doing so, but even I did my first root via a toolkit in the beginning.
Thanks, gents. I'll weigh those options.
Btw, I posted the poll in jest as a bit of self-deprecation as I feel like a bum for not being able to find the answer via search.
I've gone through root procedures for multiple devices, including using Wug's toolkit to root the N5. This would be the first time, however, that I'd be flashing an official update from a device that is rooted since my old Thunderbolt upgraded from Gingerbread, so I've just felt shaky about the best way to go about things.
I appreciate the replies already posted, and any future replies as well.
janjanrex said:
If you have adb properly setup and your pc likes to talk to your Nexus 5 [I always have to redo the drivers] - I referenced this guide again http://forum.xda-developers.com/goo...e-update-rooted-device-to-5-1-lmy47d-t3050789 to run the update to 6.0 (M).
It's just a simple easy to read post of the fastboot flash commands you have to do.
While a clean install is recommend when moving from 5.X to 6.0 you don't have to.
The two things to note - don't use the Flash-all.bat file nor flash userdata from the factory image [that will wipe your phone].
To root you'll have to use a modified boot.img - I went simple and used Chainfire's boot img from post 1 http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
I advocate doing the steps yourself via adb if you're comfortable doing so, but even I did my first root via a toolkit in the beginning.
Click to expand...
Click to collapse
Once u flash the (a) modified kernel via fastoot/recovery... Then is root basic like it's been where u just flash twrp and then flash the SuperSu zip?
Sent from my Nexus 5 using Tapatalk
"Btw, I posted the poll in jest as a bit of self-deprecation"
Hahahahaha... Well, that puts me in my self-righteous place well and truly...
Nice one...
Learning how to use adb and fastboot is good knowledge to have handy for the future.
Sent from my Nexus 5 using Tapatalk
H0tep said:
Once u flash the (a) modified kernel via fastoot/recovery... Then is root basic like it's been where u just flash twrp and then flash the SuperSu zip?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yes after you have flashed all the 6.0 images and the modified boot img then flash twrp to replace stock recovery and install SuperSU BETA via twrp.
janjanrex said:
If you have adb properly setup and your pc likes to talk to your Nexus 5 [I always have to redo the drivers] - I referenced this guide again http://forum.xda-developers.com/google-nexus-5/general/guide-update-rooted-device-to-5-1-lmy47d-t3050789 to run the update to 6.0 (M).
It's just a simple easy to read post of the fastboot flash commands you have to do.
While a clean install is recommend when moving from 5.X to 6.0 you don't have to.
The two things to note - don't use the Flash-all.bat file nor flash userdata from the factory image [that will wipe your phone].
To root you'll have to use a modified boot.img - I went simple and used Chainfire's boot img from post 1 http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
I advocate doing the steps yourself via adb if you're comfortable doing so, but even I did my first root via a toolkit in the beginning.
Click to expand...
Click to collapse
Thanks very much for all the assistance! I successfully upgraded utilizing the adb/fastboot method. It was rather simple and, while removing root (as advertised), it did upgrade without wiping the data. Full disclosure, this is my wife's phone. Wiping the data wouldn't have resulted in a divorce, as I had backed up everything, however, she would have been very annoyed, so this kept our marriage peaceful (until the next time I find a way to screw something else up - and I always find a way!)
The only snag I ran in to was not understanding that I had to snag adb/fastboot from the SDK and paste them in the folder that the factory image, etc was extracted to. Once I got those exe files in the same folder where I had previously extracted the other images, the command prompt had no problem using adb - it's amazing what your computer can do when you point the command prompt to 1. the correct folder and 2. make all the necessary files available in said folder.
Once again, thanks for all the help. Now to TWRP and Root!