Related
Now there is official support from ROM Manager so just download it from market and install custom recovery
Thanks to MarcNvidic
OLD
So I found out this little trick by trial and error...
Since there is currently no support for our device.. :S
This is a working Rom Manager! FINALLY!
Backup, Flash, I think everything works!
Procedures:
1.Reboot into bootloader mode (power phone while pressing the red key and volume down)
2.Flash Clockworkmod Recovery for Ideos (Drivers-- install pdanet-- everything will automatically install)
3.Extract this files to the root of sdcard
4.Download and Install Rom Manager 3.0.1.4 using a file manager (market is a friend)
5.Start Rom Manager!
6.It should say, "Current Recovery: ClockworkMod 3.0.0.5" if everything went OK.
Click to expand...
Click to collapse
Thank you!
Click to expand...
Click to collapse
Reserved for possible improvements
:n3wb: Q's:
Could you post a quick how to?? (using terminal emulator -=or=- UltraJack - my pc don't like sdk)
PS - Could I pm you re, custom bootanimation?? Another thing I can't get to work!!
:I_Luv_Linux:
King_Rat said:
Could you post a quick how to?? (using terminal emulator -=or=- UltraJack - my pc don't like sdk)
PS - Could I pm you re, custom bootanimation?? Another thing I can't get to work!!
:I_Luv_Linux:
Click to expand...
Click to collapse
sure pm me...but what is what you cant do...copy files to sdcard...flash recovery...install rom manager using a file manager..and is done.
Look again at instructions, see if it's more clear.
Gotcha ^^
step 2. [is where my learning is at currently]
the rest of it I get
App -=or=- This
PS - Clicky <<<= if you wouldnt mind having a look ^^
King_Rat said:
Gotcha ^^
step 2. [is where my learning is at currently]
the rest of it I get
App -=or=- This
PS - Clicky <<<= if you wouldnt mind having a look ^^
Click to expand...
Click to collapse
Try the the one from softonic...the windows app will install drivers so you can continue....(then connect device in bootloader to computer, go to the device manager, manually install driver for "android device", select android bootloader interface.)
:mmm:
Are they the 'Android Device 1.0' drivers??
If so... my pc (win7 x64) auto. installed them when connecting in bootloader mode while installing 'UltraJackRecovery'.
So... how do I go about flashing 'ClockWordMod'??
Is it a similar process to UJR??
T.I.A
King_Rat said:
Are they the 'Android Device 1.0' drivers??
If so... my pc (win7 x64) auto. installed them when connecting in bootloader mode when installing 'UltraJackRecovery'.
So... how do I go about flashing 'ClockWordMod'??
Is it a similar process to UJR??
T.I.A
Click to expand...
Click to collapse
Its the same as flashing UJR
Sorted ^^
Succesfully applied
thnx for help(s)
@ maury... hope you don't mind if I share this with my Modding fraternity??
I'm admin @ ph. modding site (primarily Motorola - a few Android users)
Will give you & xda full credit o/c
King_Rat said:
Succesfully applied
thnx for help(s)
@ maury... hope you don't mind if I share this with my Modding fraternity??
I'm admin @ ph. modding site (primarily Motorola - a few Android users)
Will give you & xda full credit o/c
Click to expand...
Click to collapse
Of course! i DONT mind man
This is an open source community so everything is for everyone
cheers for that ^^
Testing Cyanoman thanks to ROM Manager ^^
hi，I am chinese，I want to learn the make rom ,could you help me?
My QQ is 68277855,thank you.
Do I place the clockworkmod folder in the root, or the downloads folder + setting file?
Smtih said:
Do I place the clockworkmod folder in the root, or the downloads folder + setting file?
Click to expand...
Click to collapse
in root the root of sdcard
maury1234 said:
So I found out this little trick by trial and error...
Since there is currently no support for our device.. :S
This is a working Rom Manager! FINALLY!
Backup, Flash, I think everything works!
Thank you!
Click to expand...
Click to collapse
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?
GolfCranK said:
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?
Click to expand...
Click to collapse
Problem is possibly you did it in the wrong order. And you didn't mention copying the files.
You need to flash the rom, copy the clockwordmod folder linked on the first page, into the root of your sd, then install rom manager. This worked fine for me
GolfCranK said:
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?
Click to expand...
Click to collapse
Smtih said:
Problem is possibly you did it in the wrong order. And you didn't mention copying the files.
You need to flash the rom, copy the clockwordmod folder linked on the first page, into the root of your sd, then install rom manager. This worked fine for me
Click to expand...
Click to collapse
There is now official support for rom manager and Clockworkmod so no more is needed for rom manager to work...just flash
maury1234 said:
There is now official support for rom manager and Clockworkmod so no more is needed for rom manager to work...just flash
Click to expand...
Click to collapse
Yes thats the way I did it. Installed Rom Manager from market and it installed the ClockworkMod Recovery latest version for Ideos. I also downloaded the FusionIdeos zip file straight to my phone. But everything I select results in a reboot to the white screen with IDEOS across it and both buttons lit. All the actions below have this result:
In Rom Manager, press Reboot to Recovery
In Rom Manager, press Flash new ROM
Power on phone with buttons for bootloader
Power on phone with buttons for Recovery
Reset using settings>privacy>Factory Data Reset
I can only restart by pulling out the battery then turn on phone and it loads normally and runs the same as ever.
I really don't know what to do next.
hi
helo guys iam new to.android i want to backup my currenr rom bt unfortunatly nt sucesful when i ever tried to backup using rom.manager it appears a blackscreen i dnt knw whats the problem plzzz help bu step by step backup regards saad
saadiworld said:
helo guys iam new to.android i want to backup my currenr rom bt unfortunatly nt sucesful when i ever tried to backup using rom.manager it appears a blackscreen i dnt knw whats the problem plzzz help bu step by step backup regards saad
Click to expand...
Click to collapse
Do you have a custom recovery installed? If you do simply boot into recovery. (Turn the phone on while holding the volume up and call keys.) Once your phone reboots into recovery select backup and restore and backup.
If you don't have a custom recovery, first make sure you're using the latest rom manager. Open rom manager and select flash clockworkmod recovery and select huawei u8150 from the list. Once it flashes select reboot into recovery. Once your phone reboots into recovery select backup and restore.
It is Zeki TB782B 4.0.4 ROM (non wipe ROM and keep all your setting after flash) and the flash steps is same as the Google market link as below
You need a micro SD card insert to the Tablet TF Card Slot
If you download the file from PC
1. Download 4.0.4 ROM file from below link and extract it to get the update.zip file.
http://www.mediafire.com/?2k7l85czme1e4a8
2. Connect the Tablet with the USB wire to the PC USB prot
3. Go to Tablet USB mass Storage Screen and tap on the (Trun on USB Storage)
4. Goto your PC My Computer you will find two new disk, one is Zeki disc
5. copy the update.zip to the root the new disk of the micro SD in the tablet (Don't copy to the Zeki
Disc)
6. Goto Set UP
7. Goto About Tablet>SystemUpdate>Check Now>OK
8. The tablet reboot and go to the recovery screen
9. The recovery finish and power on again
10.. You will get the 4.0.4 TB782. Enjoy it.
Download the file and extract to get the updated file with the Tablet from the below link
http://www.mediafire.com/?2k7l85czme1e4a8
1 When the file finished download open the Es explorer
2. Tap SDcard download folder and you will find the FID BN TB782B 4.0.4 rar file
3.Extract the file and you will find the folder and a undat.zip file inside.
4. Long Tap the update.zip file and a list jump up
5. Tap on the copy to and another list will jump out
6. Tap on the uppest row name /sdcard and with jump to another page
7. Tap on the /mint/extsd and tap to lowest row OK then the file will copy to the micro SD card
8. Follow PC download steps from 6 to 10
You will get the 4.0.4 TB782B.
But there is a chance to brick your tablet and don't blame me
If you want to get the google market(update.zip) and the G-sensor Tweak just download the attached files.
Warning: All the file and rom in this post is only good for the version mark FID:BN on the back cover beside the Made in China, Otherwise it will brick your tablet
Fantastic....Now how about the 4.0.4 ROM for TB1082B FID:HN?????
Good news I guess
I did follow the instruction and did get Android 4.0.4 on my Zeki TB782B tablet. I don't see much difference at the moment but maybe using it for a little bet maybe I will see what the difference is...just using it for a couple of minutes it does seem maybe a little smoother perhaps.
Now that I've installed it, the volume buttons along the bottom of the screen disappear and reappear every so often, but that's minor. Everything else seems to be working fine.
I did find out that my directv app does not seem to work on the 4.0.4 version.
Sent from my DROID BIONIC using xda premium
Works!
Works great! Thanks!
Dear team.
good afternoon.
I bought a ZEKI TB1082B tablet FID:HN, and i tried to install google apps, by using this method showed
Just after i tried, my deviced got "bricked" its stock in white screem,
i realized the method but didnt know it only worked for FID:BN Models.
I am asking for your help, hoping maybe you could provide a clean firmware compatible with my device or some update.zip for my device, so i could be able to install it via recovery.
i would really appreciate any help or answer that you could provide.
Thanks in advance..
gmrastaman said:
Dear team.
good afternoon.
I bought a ZEKI TB1082B tablet FID:HN, and i tried to install google apps, by using this method showed
Just after i tried, my deviced got "bricked" its stock in white screem,
i realized the method but didnt know it only worked for FID:BN Models.
I am asking for your help, hoping maybe you could provide a clean firmware compatible with my device or some update.zip for my device, so i could be able to install it via recovery.
i would really appreciate any help or answer that you could provide.
Thanks in advance..
Click to expand...
Click to collapse
Try to press the Vol+ and the power switch to see if you can go to the recovery page.
If yes, it can be unbricked. Otherwise you need to reflash the ROM.
cablepama said:
Try to press the Vol+ and the power switch to see if you can go to the recovery page.
If yes, it can be unbricked. Otherwise you need to reflash the ROM.
Click to expand...
Click to collapse
yes i can enter in the recovery page but when i try this update it comes again to the white screen
gmrastaman said:
yes i can enter in the recovery page but when i try this update it comes again to the white screen
Click to expand...
Click to collapse
I am building the TB1082B 4.0.4 ROM (update file) . You can use the recovery mode. Update zip file to update the new ROM and unbrick your tablet.
It need around 10 days
cablepama said:
I am building the TB1082B 4.0.4 ROM (update file) . You can use the recovery mode. Update zip file to update the new ROM and unbrick your tablet.
It need around 10 days
Click to expand...
Click to collapse
now i format my device looking for the fomat tool u mention early :S
and now i dont have recovery page :S
now im really lost....
the firmware is development only by the owners of the www.zekitablet.com?
My zeki tab came with 4.04 preloaded, what does that mean?
Sent from my HTC Magic using XDA Premium
ROM ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
I applied this ROM to my BN TB782B and now the touch sensor doesn't work. I have tried re-applying the 4.0.4 ROM with no luck. Does anyone have the original 4.0.3 ROM so I can recover it to original? Otherwise, tablet is useless.
Thanks for the help.
little prblem
when I connect my tab to my pc, it does not show names for the tablet's drives. both just appear as "USB drive E:" and have the same contents. so how can I tell them apart?
I was trying to download Scott's latest 12/02 cm10 ROM from goo servers and I'm not able to finish the download.
It downloads the entire zip file and then waits at 0sec for long time and it dies saying "interrupted".
I tried to download the rom from goo manager, chrome browser on my laptop and from phone's browser. I get the same error.
Here's the ink:
http://goo.im/devs/scotthartbti/unofficialcm10/cm-10-20121202-UNOFFICIAL-infuse4g.zip
Can someone try to download and confirm?
Thanks in advance.
Note: gapps downloaded fine from goo server.
darshakk said:
I was trying to download Scott's latest 12/02 cm10 ROM from goo servers and I'm not able to finish the download.
It downloads the entire zip file and then waits at 0sec for long time and it dies saying "interrupted".
I tried to download the rom from goo manager, chrome browser on my laptop and from phone's browser. I get the same error.
Here's the ink:
http://goo.im/devs/scotthartbti/unofficialcm10/cm-10-20121202-UNOFFICIAL-infuse4g.zip
Can someone try to download and confirm?
Thanks in advance.
Note: gapps downloaded fine from goo server.
Click to expand...
Click to collapse
Got it.... no prob... ultrabook with chrome browser.
Maybe try again ?? g l
Hi bigjoe !!
Pony Express said:
Got it.... no prob... ultrabook with chrome browser.
Maybe try again ?? g l
Hi bigjoe !!
Click to expand...
Click to collapse
Tried it after some hours and worked fine. May be some glitch on server side.
My first post Hurray!
Hi guys.
I want to install Android 4.3 to my HTC Google Nexus One. I followed this post.
I installed everything needed and when I try to install the update I get the following results:
Formatting System
Installing CM 10.2
Setting symlinks and premissions...
Setting symlinks...
Setting permissions..
set_perm: some changed failed
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
I have Fastboot access to the phone when connected via USB to my Windows 7 laptop.
I am using recovery versions 5.0.2.0 for my Google Nexus One phone.
Flashing ROM: CM 10.2 Rom for the N1
How can I solve this issue, need your help. Thanks in advance. :cyclops:
Other things I've tried: Flashing the rom from boot.img from the zipped file via fastload
I also checked for assert command in the script file but there aren't any.
IdanShechter said:
My first post Hurray!
Hi guys.
I want to install Android 4.3 to my HTC Google Nexus One. I followed this post.
I installed everything needed and when I try to install the update I get the following results:
I have Fastboot access to the phone when connected via USB to my Windows 7 laptop.
I am using recovery versions 5.0.2.0 for my Google Nexus One phone.
Flashing ROM: CM 10.2 Rom for the N1
How can I solve this issue, need your help. Thanks in advance. :cyclops:
Other things I've tried: Flashing the rom from boot.img from the zipped file via fastload
I also checked for assert command in the script file but there aren't any.
Click to expand...
Click to collapse
might need to get a higher vesion of CWM. otherwise google Status 7 error
Hi,
Which version is recommended, the highest that is compatible. According to the ROM manager page of clockworkmod, this is the only one available for the nexus one.
IdanShechter said:
Hi,
Which version is recommended, the highest that is compatible. According to the ROM manager page of clockworkmod, this is the only one available for the nexus one.
Click to expand...
Click to collapse
you would have to get a ported (non offical: should work just as fine as offical but there could be some other added stuff.) version since you want Cm 10.2 5.x.x.x should work but just to be on the safe side you should try getting 6.0.4.5. should only have to download a zip of whatever you find and flash it in your current recovery.
Trozzul said:
you would have to get a ported (non offical: should work just as fine as offical but there could be some other added stuff.) version since you want Cm 10.2 5.x.x.x should work but just to be on the safe side you should try getting 6.0.4.5. should only have to download a zip of whatever you find and flash it in your current recovery.
Click to expand...
Click to collapse
I get Image Update Error when updating the 6.0.4.5 version. I've chosen on for another device because there isn't any 6.0.4.5 version for Nexus One.
I checked the free available space. In the SD Card I've have plenty (more than 2GB), but /system has 0% available. This might cause the flash to fail. Is there any option to free up space before I flash the ROM?
Update: even after formatting the system directory I still get the same error, this it not the problem so it seems.
IdanShechter said:
I checked the free available space. In the SD Card I've have plenty (more than 2GB), but /system has 0% available. This might cause the flash to fail. Is there any option to free up space before I flash the ROM?
Update: even after formatting the system directory I still get the same error, this it not the problem so it seems.
Click to expand...
Click to collapse
your gonna have to ask the nexus ones offical Q&A then http://forum.xda-developers.com/nexus-one/help if i right with this problem you have to do something specifically and differently for every device so just ask the pros on your device first.
IdanShechter said:
My first post Hurray!
Hi guys.
I want to install Android 4.3 to my HTC Google Nexus One. I followed this post.
I installed everything needed and when I try to install the update I get the following results:
I have Fastboot access to the phone when connected via USB to my Windows 7 laptop.
I am using recovery versions 5.0.2.0 for my Google Nexus One phone.
Flashing ROM: CM 10.2 Rom for the N1
How can I solve this issue, need your help. Thanks in advance. :cyclops:
Other things I've tried: Flashing the rom from boot.img from the zipped file via fastload
I also checked for assert command in the script file but there aren't any.
Click to expand...
Click to collapse
Status 7 error comes due to system folder being full.. I m not a nexus one user and its a common problem..
Open the rom zip of your file delete some apps from system/app then flash the rom..
This will solve your status 7 error..
INSTALL TWRP AND ROOT
YOUR GALAXY TAB 4
This is for Galaxy Tab 4 7.0 SM-T23x / NU models.
New Updet : Flasheble zips of all TWRP versions! Download Link is given at the end of the thread.
Code:
WARNING:
1. Warranty will be void if you install a Custom Recovery and ROOT your device.
2. I am not responsible for any thing wrong happen with your device. Do this at your own risk.
3. If you blame me, I will lough at you.
4. But you can always PM me or comment here if any thing wrong happen to your device. I will try to help you.
REQUIRED:
PC
Data Cable
Your TAB 4
Some Basic Knowledge (very important!!)
A working Brain !!!! (It is inside your head)
INSTRUCTIONS:
First of all you have to download the ROOT Samsung Galaxy TAB 4 v4.zip from HERE.
My zip contains :
Odin_v3.09
SAMSUNG_USB_Driver.exe
recovery.tar.md5 (TWRP 2.8.7.0)
UPDATE-SuperSU.zip
Extract the zip.
Install Samsung USB driver (Given in the zip) on your pc if you don't have this. If you have already installed the driver, ignore this step.
Now, lets start installing TWRP...
Open ODIN in your PC.
Put your Tablet in download mode by Pressing the Home button + Power + Volume Down. Release buttons ,when you see a warning ; then press the volume up (vol +) to continue to download mode.
Connect your Tablet to your PC
There is a option named 'AP' in the ODIN . Just tick that and click on 'AP'.
Now Select the recovery.tar.md5 file from the extracted zip.
Then untick the Auto Reboot ontion on ODIN
Press START Button.
Wait till flashing is finished.
After flashing is finished, press Home Button + Volume Up + Power button togather to reboot into recovery.
TWRP is now installed successfully!
Now to update the recovery to TWRP 3.0.0, just flash the TWRP 3.0.0 zip from below.
ROOTING PROCESS :
FIRST OF ALL YOU HAVE TO TRANSFER THE UPDATE-SuperSU.zip FILE( I have given in the zip) IN THE INTERNAL MEMORY OF YOUR TABLET
BOOT INTO RECOVERY MODE BY PRESSING POWER BUTTON+HOME BUTTON+VOLUME UP BUTTON
NOW SELECT INSTALL
CHOOSE THE UPDATE-SuperSU.zip FROM THE INTERNAL MEMORY OF YOUR TABLET
FLASH THE FILE AND THEN RESTART YOUR TABLET
[NEW UPDATE]
Flashable zips of TWRP:
If you have a lower version of TWRP installed, you can flash the zip to update directly !! :laugh:
TWRP 3.0.0 (25/03/2016):
Download Lnk: Android File Host
Older Versions:
TWRP 2.8.7.0 (29/07/2014):
Download Lnk: Android File Host
Bugs of TWRP 3.0.0 :
No Bugs!! :laugh:
Bugs of TWRP 2.7.8.0 :
Probably MTP is not working Fixed
Unable to restore backups Fized
Can't clear Cache partition from wipe option Fixed
ExtSdCard is not showing Fixed
Meny Thanks & Credits:
TeamWin for this beautiful recovery.
@reas0n for the TWRP 2.8.7.0 Recovery img and all fixing.
@sub77 for the TWRP 3.0.0.
:angel: :good:
DON'T FORGET TO GIVE A THANKS, IF YOU FOUND THE POST HELPFUL
:good: :angel:
Just out of curiosity, why do you keep reposting root methods that others have shared?
thisisapoorusernamechoice said:
Just out of curiosity, why do you keep reposting root methods that others have shared?
Click to expand...
Click to collapse
I think this tutorial is more easy and effective... I explained evry steps... The tutorial link you have given in not perfect. It is not working.
Hi, new here on this forum my wife bought my daughter a tab 4, itsversiin is 4.4.2 i wanted to root it but when i check the forum theres no SM-T231 on the roms available. I have a note 3 under omega 25.1 LP. Can anyone help me wih my daughters tab and suggest a good rom. Alsonif a root my daughters tab can she use "whatsapp"? Thanking you guys in advance.
There is no custom rom for SM-T231... But you can root it to customise it like lollipop.
Sent from my SM-T231 using XDA Free mobile app
knive13 said:
Hi, new here on this forum my wife bought my daughter a tab 4, itsversiin is 4.4.2 i wanted to root it but when i check the forum theres no SM-T231 on the roms available. I have a note 3 under omega 25.1 LP. Can anyone help me wih my daughters tab and suggest a good rom. Alsonif a root my daughters tab can she use "whatsapp"? Thanking you guys in advance.
Click to expand...
Click to collapse
There is no custom rom for SM-T231... But you can root it to customise it like lollipop. And Whatsapp don't need root access. Your daughter can use it without rooting the tab.
Sent from my SM-T231 using XDA Free mobile app
tablet
BRoy_98 said:
There is no custom rom for SM-T231... But you can root it to customise it like lollipop. And Whatsapp don't need root access. Your daughter can use it without rooting the tab.
Sent from my SM-T231 using XDA Free mobile app
Click to expand...
Click to collapse
thats sad to hear theres no custom rom for her tablet, regarding whats app i cant seem to make it work on her tablet in play store it says application not compatible.
knive13 said:
regarding whats app i cant seem to make it work on her tablet in play store it says application not compatible.
Click to expand...
Click to collapse
In settings > security, enable installation from unknown sources. Download the apk file from apkmirror to your tablet. Open the apk file with a file explorer, install
whats app i cant seem to make it work on her tablet in play store it says application not compatible.
Click to expand...
Click to collapse
Did you try Whatsapp in other devices ?
You can get 'application not compitable' error for three ressons :
1. Some apps are marked as only being compatible with certain phones or tablets. However, they may run just fine on unsupported devices.
2. Some apps are only allowed to be installed in certain countries.
3. All apps have a minimum version of Android they require.
I think your problem is either No. 1 or No. 2 .
For Problem No. 1, you can download & install Merket Helper app. This app needs root permission. This can chenge the device model Name. Replace the name with a supported device. Know more about Merket Helper App here .
For problem No. 2, Download the .APK file of Whatsapp from here and install it.
Removed
Helped
Hii friends.. Is this helpfull to you?
Thanks, was quick & painless ?
ZephCr said:
Thanks, was quick & painless
Click to expand...
Click to collapse
Welcome bro..! :fingers-crossed:
Updated TWRP (2.8.7.x) for SM-T230 (Tab4 7.0)
Everything should work besides MTP (ADB is more important than MTP for me, they were breaking each other).
Download: Google Drive
@BRoy_98 please check it, You can add it to OP if You want then.
reas0n said:
Updated TWRP (2.8.7.x) for SM-T230 (Tab4 7.0)
Everything should work besides MTP (ADB is more important than MTP for me, they were breaking each other).
Download: Google Drive
@BRoy_98 please check it, You can add it to OP if You want then.
Click to expand...
Click to collapse
Thanks... I am updating your google drive link in OP in 5 mints. :good::good::fingers-crossed:
reas0n said:
Updated TWRP (2.8.7.x) for SM-T230 (Tab4 7.0)
Click to expand...
Click to collapse
Btw, who is the devloper of this version?
BRoy_98 said:
Btw, who is the devloper of this version?
Click to expand...
Click to collapse
I compiled it by myself, lol
reas0n said:
I compiled it by myself, lol
Click to expand...
Click to collapse
Oh.. Good work..!! I am gonna updet mine too..!!!
Best Thread so far
Sent from my SM-T231 using XDA Free mobile app
reas0n said:
Updated TWRP (2.8.7.x) for SM-T230 (Tab4 7.0)
Everything should work besides MTP (ADB is more important than MTP for me, they were breaking each other).
Download: Google Drive
@BRoy_98 please check it, You can add it to OP if You want then.
Click to expand...
Click to collapse
BRoy_98 said:
Thanks... I am updating your google drive link in OP in 5 mints. :good::good::fingers-crossed:
Click to expand...
Click to collapse
Thank you guys for the update. I love the new TWRP. Works well on the SM-T230NU.
Huge thanks to @reas0n and @BRoy_98
I made a flashable zip for those that are interested. - just reboot to recovery > flash zip > reboot recovery (to check out the new TWRP) > reboot system
link : https://www.androidfilehost.com/?fid=24052804347785245
MD5 SUM : 204060fc756bc03bf239dad163d5e3d2