[ROM] CyanogenMod-7 for ZTE Blade (Orange San Francisco) :: V7.0.2 (25/04/2011) - Blade Android Development

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the ZTE Blade, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full ourput.
Please use Pastebin when possible.
Download Links:
Get it here.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
If you would like to donate, please click here. All donations are gratefully received.
Love from Tom_G and HCDRJacob

Great work on this guys, by far the best blade rom! Surprised it even runs smoother than RC-1 on my N1.
Gotta love the blade

I have 3 devices waiting for this!
But I have 2 questions:
1. Are there any major bugs/downsides at this version?
2. The 3 devices I will use are Greek models with the ram locked to 256mb. I'm asking because the wiki wasn't clear.. Will the additional ram be unlocked by installing this?
Sent from my HTC Desire

marinos35 said:
I have 3 devices waiting for this!
But I have 2 questions:
1. Are there any major bugs/downsides at this version?
2. The 3 devices I will use are Greek models with the ram locked to 256mb. I'm asking because the wiki wasn't clear.. Will the additional ram be unlocked by installing this?
Sent from my HTC Desire
Click to expand...
Click to collapse
i suggest you unlock them to 512mb.. then flash this rom.

Oh, this is so cool, what a shame that i am currently on holidays in turkey and the blade is at home....
Congratulations anyway, will try as soon as i am back !

I've been testing this ROM a while and there's one glitch that doesn't allow me to wake the screen up after a phonecall.. It happens each time I speak to someone for more than a minute.

Ri0z said:
I've been testing this ROM a while and there's one glitch that doesn't allow me to wake the screen up after a phonecall.........
Click to expand...
Click to collapse
It's a known bug. Try disabling the proximity sensor and enable the keep screen awake under call settings as a temp fix.

harmohn said:
It's a known bug. Try disabling the proximity sensor and enable the keep screen awake under call settings as a temp fix.
Click to expand...
Click to collapse
Thanks for the help, although I couldn't find any way to actually disable the proximity sensor. Is this bug known in all ROMs or just this one? Otherwise, awesome ROM! Holding my thumbs over here for a fix.

It's an issue with 2.3 for all blade roms at the moment afik.

How do you disable the proximity sensor?
I love the rom, really great work with it! But I hope this'll be possible to fix.

Recoda said:
How do you disable the proximity sensor?
I love the rom, really great work with it! But I hope this'll be possible to fix.
Click to expand...
Click to collapse
Un-checking the 'In-call UI' under the call settings menu will disable the proximity sensor. You'll have to use the the physical menu button to hang up calls etc.
Nightly build #6 (#5 didn't get built) will apparently have a fixed kernel for the proximity sensor. This hopefully may sort out the long call issue.

Nightly 6 is already available

Nightly 8 is out.

Nightly 12 is out

i did install the latest Build.12 .. but i have wifi problems.. cant connect with anything.. Wifi is showing up and says its connected but cant establish a connection to anything. no weatherdata, no webpages, no market.. nothing..

I installed build 12 two days ago and have had no problems at all
It definitely seems more responsive than 11, and as an added bonus, the proximity sensor appears to be working again so that when I finish a phone call it wakes the screen up properly which it didn't with 11.

Will Angry birds run smoothly on this, or is that never going to work nicely because of the slow CPU?
Excuse the noob question but this is my gf's phone, not mine.

To get Angry Birds to run smoothly you need to install it on the phone memory, not on the SD card. Then it should run pretty smoothly.

The proximity sensor issue is still alive and well to state that this rom is good for everyday use is not entirely accurate.Until this major bug is fixed i suggest they stop fixing other issues and fix the one that matters which is the proximity sensor as that makes using this rom impossible, not many makers of roms on here would say this rom is good for everyday use because it isnt.the work that has been done so far is good but it really needs this pain in the ass bug fixed and so cmon guys there must be someone who can fix this bug pleeeaaasssseeee arghhhhh

Nightly 18 is available

Related

[SM-T320] CyanogenMod 11.0 Nightlies for the Tab Pro 8.4 Wifi (mondrianwifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Unofficial "last" build:http://download.crpalmer.org/downloads/mondrianwifi/cm-11-20150221-UNOFFICIAL-mondrianwifi.zip.
Google apps addon:
Download: http://goo.im/gapps (use latest kk gapps)
Mirror: http://download.crpalmer.org/downloads/gapps/
Useful Links
Unofficial changelog
Mondrianwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 for MondrianWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
Version Information
Status: Testing
Created 2014-05-08
Last Updated 2014-09-25
Reserved
Reserved
Excellent work, and once again thanks a lot for your work crpalmer!
BTW, I believe that the last after all changes from the last unofficial build is merged into CM code, it should be good enough to be promoted to an M-Release!
_dsouza_ said:
Excellent work, and once again thanks a lot for your work crpalmer!
BTW, I believe that the last after all changes from the last unofficial build is merged into CM code, it should be good enough to be promoted to an M-Release!
Click to expand...
Click to collapse
Yes, I would have put it in for a M release if it had gotten merged in time. Assuming I don't screw it up in the next few weeks it should get the next M release.
Thanks! Great work!
Nice, just in time I received my 8.4. Finally an official build for this nice tablet. It's flashing time again
Installed nightlys and have problem with connection to Play Store. Get message "No connection", but Mail Chrome a s o don´t missing connection.
Did 2 clean insatll with Gapps from your link and got the same result, no connection to Play Store. Go back to unofficeill version CM and Play Store working great.
I am so happy to see this device become official. The time you did all of this in is simply amazing.
Thank you.
Are nighties ROMS that we will flash everynight that have small changes?
Will Goo.Manager be able to update our "CM11" because it is official?
thanks
Silkeister1
lasset said:
Installed nightlys and have problem with connection to Play Store. Get message "No connection", but Mail Chrome a s o don´t missing connection.
Did 2 clean insatll with Gapps from your link and got the same result, no connection to Play Store. Go back to unofficeill version CM and Play Store working great.
Click to expand...
Click to collapse
Do a web search. This is a fairly common problem and I believe that the fixes are basically to clear cache / data for the app and if that doesn't work to try a factory reset (but do the search and see what it says).
Silkmeister1 said:
I am so happy to see this device become official. The time you did all of this in is simply amazing.
Thank you.
Are nighties ROMS that we will flash everynight that have small changes?
Will Goo.Manager be able to update our "CM11" because it is official?
thanks
Silkeister1
Click to expand...
Click to collapse
I don't use Goo Manager so I don't know what it will or won't do. You also don't really need it. You can get updates by going to Setting >> About tablet >> CyanogenMod updates and making sure that you select that you want to get the nightlies. If there aren't any problems, last night's build should be ready in about 45 minutes (so if you check now it will just show the first nightly as and say it is installed).
Nightlies are literally whatever the current code is when it runs a build each night. They could have little to no changes or there could be huge changes. Most of the time the changes are good but there is always a risk of nasty bugs in nightlies (for example, yesterday's build had a beep every 10 seconds when making voice calls on all phones) so if you are risk adverse, stick with the monthly M builds (when they become available for our tablet).
crpalmer said:
I don't use Goo Manager so I don't know what it will or won't do. You also don't really need it. You can get updates by going to Setting >> About tablet >> CyanogenMod updates and making sure that you select that you want to get the nightlies. If there aren't any problems, last night's build should be ready in about 45 minutes (so if you check now it will just show the first nightly as and say it is installed).
Nightlies are literally whatever the current code is when it runs a build each night. They could have little to no changes or there could be huge changes. Most of the time the changes are good but there is always a risk of nasty bugs in nightlies (for example, yesterday's build had a beep every 10 seconds when making voice calls on all phones) so if you are risk adverse, stick with the monthly M builds (when they become available for our tablet).
Click to expand...
Click to collapse
Thanks for the quick and detailed response Crpalmer
Which version is the most stable for now would you say? (Daily driver material)
regards
Silkmeister1
Silkmeister1 said:
Thanks for the quick and detailed response Crpalmer
Which version is the most stable for now would you say? (Daily driver material)
regards
Silkmeister1
Click to expand...
Click to collapse
The best advice that I can give is to make a backup of something that you consider to be stable for you and then if you hit an nightly that breaks something that you need then you can go back to your backup.
Today's build should be daily driver (as was yesterday's).
Thanks!
The new theme chooser got merged into last night's build but appears to be broken for us.
Thanks for your work. Unfortunately I own SM-T325. Is there any chance of porting it to this device? I would love to see CM on this device with maintaned 4G and GSM support. If it is needed I can provide you a copy of source codes for this device (samsung servers are unbelievably slow, I was downloading it more than one hour). Thank you.
crpalmer said:
The best advice that I can give is to make a backup of something that you consider to be stable for you and then if you hit an nightly that breaks something that you need then you can go back to your backup.
Today's build should be daily driver (as was yesterday's).
Click to expand...
Click to collapse
Solution for no working Play Store, “No Connection”
1. Check that date and time is correct set.
2. Insted of Gapps from OP use Slim Rom latest gapps or some of Paranoids latest gapps.
Above solution give me back connection to Play Store.
zdenko1 said:
Thanks for your work. Unfortunately I own SM-T325. Is there any chance of porting it to this device? I would love to see CM on this device with maintaned 4G and GSM support. If it is needed I can provide you a copy of source codes for this device (samsung servers are unbelievably slow, I was downloading it more than one hour). Thank you.
Click to expand...
Click to collapse
Unfortunately, it would be far to painful to try to get a working version of sm-t325 without having the device. It takes a huge amount of time to get a new device brought up (after that it's easy for new ROMs to get built). I can't image the time it would take using only remote testers to fix the kinks. And then after that, any bug that came up would be impossible to test.
I do this for fun and that sounds like it would stop being fun fast!
crpalmer said:
Unfortunately, it would be far to painful to try to get a working version of sm-t325 without having the device. It takes a huge amount of time to get a new device brought up (after that it's easy for new ROMs to get built). I can't image the time it would take using only remote testers to fix the kinks. And then after that, any bug that came up would be impossible to test.
I do this for fun and that sounds like it would stop being fun fast!
Click to expand...
Click to collapse
Thanks for your response. Is there any chance that you could point me to some guides, tutorials or advices on porting ROMs to different devices? I am no developer but I worked with linux and I could try to build something for SM-T325. I actually pulled CM sources from github and downloaded a kernel and platform sources and made some preparations but I don't know where to head from there. Thanks and have a nice day
Wifi Issue..
Love the ROM, great work cr... Only issue I have encountered is when rebooting, I have to reconnect to my wifi. Which requires entering the password as well.
Am I missing a setting?
Thanks for your hard work and dedication.
EDIT:
Is anyone else encountering wifi issues. My install forgets my ssid password when I reboot. It even struggled a bit to connect when I tested it again earlier... running the 510 nightly.
TIA

[5.0.x] [SM-T520] CyanogenMod 12.0 Nightlies for the Tab Pro 10.1 Wifi (picassowifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lp gapps)
Useful Links
Unofficial changelog
Picassowifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12.0 for PicassoWifi (Tab Pro 10.1), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-01-07
Last Updated 2015-01-08
Reserved
Contributors
crpalmer
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
Kidding right?
Just wanted to post some things that I think will help others making the transition to CM12.
1. I had initial problems with 5GHz WiFi where it wouldn't connect. Switching to channel 48 on my router worked, but I didn't like it as a long-term solution. Luckily, I found that editing the nvram_net file located in system/etc/wifi solved the problem and I now can connect to my router using the 5GHz band set at channel 153. You have to change the ccode from GB to 0. Make sure you save the file after editing. I fear that the problem will return when the next build is released, but I at least know how to fix it.
2. Titanium Backup didn't work initially; updated the SUbinary with SuperSU and all was right in the world.
Hope this helps anyone encountering these same issues.
Sent from my SM-T520 using XDA Free mobile app
Hi @crpalmer, thank you very much for your hard work. Our beloved tablet is really somthing with CM12.
However don't you think it should be listed as a bug that wierd black dashes we see on apps recents tab?
For me this problem is still there, even with the last official nigthly. Or am I missing something?
asfpf said:
Hi @crpalmer, thank you very much for your hard work. Our beloved tablet is really somthing with CM12.
However don't you think it should be listed as a bug that wierd black dashes we see on apps recents tab?
For me this problem is still there, even with the last official nigthly. Or am I missing something?
Click to expand...
Click to collapse
Having switched to this rom and enjoying it so far the black dashes would be my only complaint.
Nightly updates
elephantsoup said:
Having switched to this rom and enjoying it so far the black dashes would be my only complaint.
Click to expand...
Click to collapse
Also now that this is official I still can't update nightly from settings I have to manually do it. Is this not enabled yet?
asfpf said:
Hi @crpalmer, thank you very much for your hard work. Our beloved tablet is really somthing with CM12.
However don't you think it should be listed as a bug that wierd black dashes we see on apps recents tab?
For me this problem is still there, even with the last official nigthly. Or am I missing something?
Click to expand...
Click to collapse
Talk to Google on that bug, it is theirs and affects multiple devices running aosp. That's why I don't list it as a bug for me...
@crpalmer: The 0108 cm12 picassowifi changelog adds duckduckgo as a search engine choice in Browser, but even after a clean flash I do not see that option. As you are much closer to CM development that I do you have any info on this? Thanks
GPS
Anyone else having GPS problems
amphi66 said:
@crpalmer: The 0108 cm12 picassowifi changelog adds duckduckgo as a search engine choice in Browser, but even after a clean flash I do not see that option. As you are much closer to CM development that I do you have any info on this? Thanks
Click to expand...
Click to collapse
I didnt really look, but I saw a couple of commits and I think it may depend on your locale to enable it.
crpalmer said:
I didnt really look, but I saw a couple of commits and I think it may depend on your locale to enable it.
Click to expand...
Click to collapse
I am in US so thought it was covered the by the GB-US commits. Just curious as I was looking (and deleting) my scary, years-old list of Google searches attached to my account. Thanks!
Dear crpalmer,
All your CM12 NIGHTLY builds are good.
Thank you very much!
texhanlon said:
Anyone else having GPS problems
Click to expand...
Click to collapse
Running fine for me.
Cheers crpalmer
GPS
watzeee said:
Running fine for me.
Cheers crpalmer
Click to expand...
Click to collapse
I am not sure how many times I have wiped and reloaded CM12. Returned to factory load and wiped and tried other ways but GPS will not lock. I returned to CM 11 and GPS works fine... I am at a loss as to what the problem might be!
Help would be greatly appreciated.
CM12 is wonderful except for this problem which no one else seems to have.
Well no kernel messages?
Or maybe a stricter gps.conf on CM12? Tried using gps.conf from CM11?
Auto update engine (config, about, update) dont work for me...
texhanlon said:
I am not sure how many times I have wiped and reloaded CM12. Returned to factory load and wiped and tried other ways but GPS will not lock. I returned to CM 11 and GPS works fine... I am at a loss as to what the problem might be!
Help would be greatly appreciated.
CM12 is wonderful except for this problem which no one else seems to have.
Click to expand...
Click to collapse
I have no GPS either.
Installed today (from CM11 nightly) without wipe (as indicated on cyanogen wiki http://www.cyanogenmod.org/blog/the-l-is-for-lollipop) and everything else seems to be working fine. No reinstallation of any apps, and all app data carried forward perfectly.
Anyone any further thoughts on GPS?
I dont have root privileges anymore.do i have to root it again?
Enable root in Developer Settings.
Sent from my LG-D850 using XDA Free mobile app

[5.1.x] [SM-T525] CyanogenMod 12.1 UNOFFICIAL Nightlies for the Tab Pro 10.1 LTE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Download Links
CyanogenMod: download.crpalmer.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lpmr1 gapps)
XDA:DevDB Information
CyanogenMod 12.1 for PicassoLTE (Unofficial), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 5.1.x Lollipop
Version Information
Status: No Longer Updated
Created 2015-04-18
Last Updated 2016-02-13
Reserved
Is there a changelog available?
M0lle said:
Is there a changelog available?
Click to expand...
Click to collapse
I think the changelog will be almost the same than picassowifi:
http://www.cmxlog.com/12.1/picassowifi
Hey crpalmer,
thanks for this great rom. Everything works perfect
Do you plan to make this an official rom or is it to much work for the amount of users?
Thanks,
Chris
@Chris1308
What is your experience with this rom, any problems?
I'm using Cyanogenmod 11 but need to upgrade due to google battery drain problem.
So I'm interested in your user experience.
Regards
Andre
Chris1308 said:
Hey crpalmer,
thanks for this great rom. Everything works perfect
Do you plan to make this an official rom or is it to much work for the amount of users?
Thanks,
Chris
Click to expand...
Click to collapse
Chris1308 said:
Hey crpalmer,
thanks for this great rom. Everything works perfect
Do you plan to make this an official rom or is it to much work for the amount of users?
Thanks,
Chris
Click to expand...
Click to collapse
It was blocked for a long time on a problem with the splash screen on boot (that made it too incomplete for official status). I fixed that relatively recently but it would require a fair bit of work to make it official right now (consolidating it with mondrianwifi and potentially breaking it) and you're right that the user base seems too small to invest the time into that.
Hi crpalmer,
Just a quick message to let you know that I installed this ROM as well and it seems to work really well. Many thanks for your work! Pity that Samsung releases so many versions of their tablets. I understand that you can't maintain and fully support CM versions for all of them.
Thanks,
Hubert
Hello crpalmer,
Thank you for your work.
I have intalled the newest 12.1 version, works perfect.
Regards
Andre
I've had some issues with the latest nightlies.
First I upgraded from 20150812 to 20150826. With the new version everything else worked fine except Chrome. On starting the app I got an "Unfortunately, Chrome has stopped" message and the app just didn't work.
Because of this I downgraded to 20150821 with which I got a "process com.android.phone has stopped" message when booting finished. This message kept on popping up with no way around it. Then I upgraded to 20150824 and the same issue with the phone process remained.
Then I went back to 20150826 (didn't have the 20150812 image available anymore). Phone started working but Chrome still didn't. I also tried Chrome Beta and the same thing happened. Dolphin, on the other hand, worked without problems.
Edit: On logcat I saw the following message which may be related to the Chrome issue:
Code:
Shutting down VM
FATAL EXCEPTION: main
Process: com.android.chrome:sandboxed_process2, PID: 10411
java.lang.SecurityException: Isolated process not allowed to call getContentProvider
Edit2: Decided to try the 20150825 nightly as a "last resort". Now both Phone and Chrome work.
The issue with Chrome seems to have been fixed in the 20150827 nightly:
http://review.cyanogenmod.org/#/c/107747/
..
Builtin encryption does not work with this realese can it be fixed?
AudioFX wont lunch (crash on start)
Nice work
exxel said:
AudioFX wont lunch (crash on start)
Click to expand...
Click to collapse
---i'ts work perfect
Big Thanks for crpalmer for this nice firmware, i like it!
Is anybody else having issues with MX Player 1.7.40 and HW+ decoder? Streams that worked on stock rom aren't with this custom rom.
MX Player switches to software decoder and playback is stuttering.
Another issue is that the IR isn't working for me. On stock rom I was able to control my set top box with the tablet an the ZappIR app. I've also tried other apps, but with the same results.
Rotating the screen by 180 degree doesn't work either, although I enabled it for 0, 90, 180 and 270 degree in the settings.
I've turned off nightly builds for the CM 12.1 version of this ROM and started nightly builds for CM 13.0. Please see the new thread I created for that:
http://forum.xda-developers.com/gal...nt/6-0-x-cyanogenmod-13-0-unofficial-t3314507
Delete

[6.0.x] [SM-T320] CyanogenMod 13.0 Nightlies for the Tab Pro 8.4 Wifi (mondrianwifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* Exfat support is done at a CM level (not device related) and last I checked has not been added yet. It should get added eventually.
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* Stable: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
* Too soon to know what's best, I'm currently using the Slim pico package myself.
Useful Links
Unofficial changelog
Mondrianwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 13.0 for MondrianWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2015-11-24
Last Updated 2015-11-24
Reserved
Wow, thanks ! It was a surprise that our tab was one of the first devices that took cm13 nightlies !
Wow. I remember when cm12 were first rolling out we were lucky enough to be one of the first to get it, now we're the first samsung device to get cm13 thanks to Christopher Palmer. You're the MAN!! :good:
Edit - enabling root in developers option but apps only get partial root. It seems like we're unable to write to system.
Initial bugs (cm-13.0-20151124-NIGHTLY-mondrianwifi - for who didn't see the other thread)
1. ExFat is currently broken so SDCards~64GB and larger (that use this filesystem) won't work
2. root (adb & apps) (can't mount /system rw with rootexplorer, esfilemanager ..etc) - not sure bug origins
I am currently using the Slim Gapps they don't crash, and are pretty stable.
Slim_zero_gapps.ALPHA.6.0.build.0.x-20151121.zip (current as of this post*)
Geekbench 3 score = 914 - 2597
AnTuTu v5.7.1 = Crashes on the Project Anarchy 3D test. (possible app bug)
AnTuTu v6.0 Beta2 (from their website) = 44773
So far the interface is smooth and lag free, for people who don't want to test or run into bugs I would wait until the stable build for the best experience .
@OP-Correct link to Change log (though 13.0 makes more sense)
http://www.cmxlog.com/13/mondrianwifi/
Anyways great news that we are some of the first devices to get CM13 / Marshmallow, and great work crpalmer!
(I hope Samsung saw this news and feels ashamed for their lack of support and updates)
Am I doing something wrong or SD cards can't be set as internal storage yet? Anyway, thank you for your great work!
user91 said:
Am I doing something wrong or SD cards can't be set as internal storage yet? Anyway, thank you for your great work!
Click to expand...
Click to collapse
Can't be used from inside apps yet, either. For example, Plex or Google Music can't store synced media there... To be expected with such a new release.
Perormance, in the short time I used the tab last night, is night and day better than cm12.1 for me.
KarlDag said:
Can't be used from inside apps yet, either. For example, Plex or Google Music can't store synced media there... To be expected with such a new release.
Perormance, in the short time I used the tab last night, is night and day better than cm12.1 for me.
Click to expand...
Click to collapse
Will cm12.1 continue to get updates while this is getting sorted?
Sent from my SM-G925F using XDA Free mobile app
Only issue I've found so far is GoogleCamera 3.1 cannot initialize video recording, but the AOSP Camera can. Never seen that before.
sualpine said:
Only issue I've found so far is GoogleCamera 3.1 cannot initialize video recording, but the AOSP Camera can. Never seen that before.
Click to expand...
Click to collapse
I have the same problem on my Xperia Z3 running Marshmallow, so likely not a ROM issue.
I used Open Gapps (http://opengapps.org/).
I selected ARM, 6.0 Mini and they work great. The had tried the Micro version but they crashed constantly.
Just a quick suggestion - you should change the [5.1.x] in the title of this thread to read [6.0.x] to avoid confusion.
spiff72 said:
Just a quick suggestion - you should change the [5.1.x] in the title of this thread to read [6.0.x] to avoid confusion.
Click to expand...
Click to collapse
Well said
Sent from my SM-G925F using XDA Free mobile app
Noticed the issues like others on. The ROM not recognizing ext card. But also I can't install SuperSu? Anyone know if CM13 is on a systemless root?
johnp357 said:
Noticed the issues like others on. The ROM not recognizing ext card. But also I can't install SuperSu? Anyone know if CM13 is on a systemless root?
Click to expand...
Click to collapse
Developer options > enable SU
Xmas comes early this year ))
First time ever I'm on the first CM nightly build for any of my devices <3
for the very first build it works not bad, no gapps or xposed tried yet though.
two things noticed:
wifi connection seems more unstable than on cm12.1.
antutu app crashes all the time when trying to run 3D benchmark. So currently cannot even get a full rating from antutu just yet.
This runs beautifully for me. Using Slim_zero_gapps.ALPHA.6.0.build.0.x-20151121.zip with no crashes. Only bugs I've run into:
1) after installing Google Now launcher, I had to reboot before it let me switch launchers. Works perfect after reboot
2) Google Camera 2.5.x crashes when processing a Lens Blur photo. Regular photos and video work fine.
Very few issues :good:
does not see the sd card.
How does improve?
kkalkan said:
does not see the sd card.
How does improve?
Click to expand...
Click to collapse
Make sure you read the thread a bit before posting - it's only 2 pages (so far).
I'm betting your card is exFat, as reading the thread that is not compatible (yet).
It's also in the OP under "Known Issues"...
Some other bugs,
1. root cannot change the /system to rw mode for some reason (will try adb later), with toybox mount -o remount,rw /system, busybox mount -o remount,rw /system, mount -o remount,rw /system all get permission denied, I can however change the / partition to rw - ( I heard this is a feature in android M, but still not sure)
2. when you power off the tablet there is no battery icon
3. I don't think the battery gauge is accurate, looking at logcat I don't think it's reading the stats
4. brightness adjuster in notification pulldown is too large
5. wifi is iffy with hidden networks (won't automatically connect), and it drops off alot.

Lineage OS 14.1 - Infinix -X603 (Zero-5) Testing Stage

Presenting First lineage OS for MT6757 Based Phone Infinix-X603.
Note:-This is unofficial Lineage OS rom and currently in alpha stage of testings. If any Dev want to help us pls commits on git hub source.
Developed By me @lalitjoshi06 & @majorkid
Join Telegram group for further development : https://telegram.me/infinixzero5
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Warning
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS.
Working:
1. wifi
2. fingerprint
3.. FM
4. Audio
5. Video
6. BT Fixed on 18.04.2018
7. Camera & flashlight Fixed on 02.05.2018
8. Ril (only working in 3g and 2g mode for outgoing)
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s) under testing will upload soon
Install a compatible Recovery TWRP
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code & Device Tree
1. https://github.com/lineageos
2. https://github.com/lalitjoshi06/android_device_infinix_x603
Credits:
1. @joe2k1 (for Tree Specially)
2. All dev who provides patches for MTK
Currently This rom is in Alpha stage of Testing with many Bugs.
So don't complaint till it being properly stable. only comment for fixes ; Thanks
keep up the Good work dude...
:good:
Thanks for it.....please fix those issues.and I will use this ROM...thanks for supporting our device
Why don't you go to v.15? Just my opinion.
useone07 said:
Why don't you go to v.15? Just my opinion.[/QUOTE
we don't have kernel sources to make it.
Click to expand...
Click to collapse
Hello guys, got a little problem, i'm just a beginner, and don't have any good knowledge, so i hope you'll be patient with me.
I did an advanced format in the TWRP, which mean everything got wiped, and now, i lost my HummingBird OS, can anyone help me ? ( Teamviewer/Discord ? )
Thanks, and i hope to get an answer ASAP
SuppyAS said:
Hello guys, got a little problem, i'm just a beginner, and don't have any good knowledge, so i hope you'll be patient with me.
I did an advanced format in the TWRP, which mean everything got wiped, and now, i lost my HummingBird OS, can anyone help me ? ( Teamviewer/Discord ? )
Thanks, and i hope to get an answer ASAP
Click to expand...
Click to collapse
Reflash stock rom via sp flash tool. join telegram group link at op u got more clarified way if getting problem.
Does "Ril (sim shows but No network)" mean, that there is no sim-card-connection possible (speech nor internet)? Otherwise I would give a Try, cause my device is buggy anyway!
ax_mf said:
Does "Ril (sim shows but No network)" mean, that there is no sim-card-connection possible (speech nor internet)? Otherwise I would give a Try, cause my device is buggy anyway!
Click to expand...
Click to collapse
if you a developer than take tree from github and try to make. sim work but only in 3g and only for outgoing calls and sms.
I am not doing any work on it currently.
Guys, you are wonderful.......You really saved my ass man. Keep it up!!!
Keep up the good work sir and I would like to help in my observation(s) to improve and debug the new CustomROM. Though, this is not a complaint! Below is my observation for now:
1)Any attempt to set up the Password, PIN or Pattern to lock the phone screen crashes and mess up the whole thing. After the crash, the pop up will come up that the "Settings has stopped" no matter how hard I tried.
You can take note of this for further necessary action(s) sir. Thanks!
OmodAbbey2018 said:
Keep up the good work sir and I would like to help in my observation(s) to improve and debug the new CustomROM. Though, this is not a complaint! Below is my observation for now:
1)Any attempt to set up the Password, PIN or Pattern to lock the phone screen crashes and mess up the whole thing. After the crash, the pop up will come up that the "Settings has stopped" no matter how hard I tried.
You can take note of this for further necessary action(s) sir. Thanks!
Click to expand...
Click to collapse
updated the last working zip which available.
further I am not working on it.
Is there internet even though it's 3G?
Invalid/damaged zip file.
lalitjoshi06 said:
updated the last working zip which available.
further I am not working on it.
Click to expand...
Click to collapse
File is corrupt, please reupload
Hi @lalitjoshi06
I see that you have updated your tree on the github, including using patches from my project. Do you have any success of RIL workin?
hyperion70 said:
Hi @lalitjoshi06
I see that you have updated your tree on the github, including using patches from my project. Do you have any success of RIL workin?
Click to expand...
Click to collapse
Not yet make only tree updated from ur patches. Will work on it as i got time and let u know about this. Currently working on another project.
And there is no tester we have, if i build all thing like testing and all i have to do myself, thats why i left this project. If i got time will do it.
BTW Thanks for UR support.
lalitjoshi06 said:
And there is no tester we have
Click to expand...
Click to collapse
I have an Infinix zero 5 pro and i could test if you want and tell me what to do.
Tavaro said:
I have an Infinix zero 5 pro and i could test if you want and tell me what to do.
Click to expand...
Click to collapse
Join telegram group will give u link download install take log and send will work on that
Please guide porting for Helio P25 MT6757CD (GOME U7).

Categories

Resources