If you want a lean mean Gingerbread rom for your new radio sapphire here it is!
Mixed results on 6.35.10.18 radio, radio 6.35.16.19 recomended. Upgrade your radio here
The source was originally from aosp and ezterry, it's quite deverged from that now.
The kernel is my 2.6.34 kernel from my other thread with all new updated usb for Gingerbread use. (turns out my kernel was fine,it was the roms that needed modifying)
As battery life goes it's ok as far as I can tell, unplugged last night at 12 am, used phone till 3 am, sat on table till 7 am, used it at work all day, when I got home at 6 it was at 58% still.
Not working:
HD youtube (has never worked for me)
Working:
cam
camcorder
usb mount
adb
usb tether (native* (wireless _settings)) < lol. been looking at code to long
charging
3d gallery
gps
wifi
cpu/memory info in about phone
usb debugging notify disable (toggle in development)
toggle for any app to sd (in applications/development)
openvpn added to vpn network types
long press back application kill (toggle in applications/development)
key backlights
Mms with full settings options (git://github.com/CyanogenMod/android_packages_apps_Mms.git)
voice search (update on market)
sync works (twitter, facebook, gmail,ect...)
updated apn list
openvpn
incoming and in-call touch UI
H for hspa enabled
CM Phone.apk
Androidterm (from cm)
Tmobile theme chooser (git://github.com/tmobile/themes-platform-vendor-tmobile-apps-ThemeChooser.git)
Notification powerwidget (thanks to ezterry)
Built in overclocking
Bluetooth pan
I shouldn't have to say wipe, yes do it, wipe all. (If coming from another rom)
If coming from any other rom I would suggest booting to the bootloader(hold back while pressing power on) and using fastboot to 'fastboot erase system -w'
Install instructions
Flash from recovery.
flash the gapps if you want them
I hope this works as good for you as it does for me!
I'm looking into a few things mentioned in this thread and adding new functionality, what would you guys like to see?
Older roms at end of post in Archive.
I'm not making a separate rom for mtd anymore, I made both DietGB and CM7 compatable with Firerats mtd boot flash and market works.
You must use fastboot and erase system "fastboot erase system -w" if you are new to DietGB or have any install or rebooting problems before posting here If you use the new recovery I compiled from cm7 clockworkmod you can just format in recovery.
I have been using this release for many weeks now, testing and modifing code, recompiling, and I think I finally have the most stable 6355 kernel and rom available, I also along the way added a few things.
New Sept 21
No wipe update to fix video recording force close
DietGB-v09.21.2011-6355sapphire
New Sept 16
Now 2.3.5 (has been for a bit now but I didn't release anything)
Many kernel updates (hope camera is good for everyone now)
added built in overclocking (in diet gingerbread settings)
bluetooth pan
new recovery
gapps backup if no wipe
3 days now, no reboots, no fc's
files are at Androidspin now, no more multiupload
DietGB-v09.16.2011-6355sapphire
July 19
Latest updates
added Notification PowerWidget
new recovery
Diet-GB-sapphire6355-07192011
carz-clockworkmod-v4.0.0.5-recovery
gapps_mdpi_gb_20110613_S
wipe if you have any issues, I didn't this time
June 19
Latest Aosp updates, new kernel, faster than ever in my testing and everything works, I would suggest a clean install.
Diet-GB-6355-v06-19-2011-signed.zip
Here is a new recovery v4.0.0.2 clockworkmod Carz-Clockworkmod-4.0.0.2-recovery.zip
reflash gapps after gapps_mdpi_gb_20110307_S.zip
New may 09
OK, everything is updated now and everything is working again, (cam and wifi) not that you knew it broke, so far after 2 days it seems more responsive and faster, I use set cpu @614 and 245
I did not wipe and it worked fine but after I did a wipe to test and it seemed faster so I don't know, you decide, I'm looking into adding compcache and swap also.
Diet-GB-6355-v05-09-2011-1-signed (usb mount fixed)(lowmemkiller fixed)
Here is a new kernel to try out, it's exactly the same as the stock kernel but has the 10mb ramhack. 10mb ramhack
New may 02
Updated to 2.3.4_r1
new Phone.apk
new Mms.apk
new Browser.apk
Diet-GB-6355-v05-01-2011
Also I have made a new recovery for our 6.35 radio sapphire phones based on Clockworkmod 3.0.2.8 get it here
New april 27
Updated kernel, no wipe from v04-23-2011, added back cm7 Mms, working on Phone.apk update
Here is link to just the kernel and modules package to flash on any version GB-v04-27-2011-signed.zip
Rom Diet-GB-6355-v04-27-2011
If you use a custom MTD flash this after DGB-boot-v1.5.8-custom-MTD_S.zip
April 23
Diet-GB-6355-04-23-2011
Updated kernel
Updated Rom 2.3.3
You need to wipe even from my rom, sorry
Diet-GB-6355-04232011
for Custom MTD flash this, DGB-boot-v1.5.8-custom-MTD_S.zip after flashing rom
v0.22.03.2011
volume/vib/silent option added
Failing at adding galaxy s style power widget, still working on it.
No wipe if coming from my roms, re install gapps
Diet Gingerbread v0.22.03.2011
Diet Gingerbread v0.22.03.2011-MTD
v0.20.03.2011
Tmobile theme chooser (tmo) (Androidian theme included)
AndroidTerm (cm)
H enabled
Diet Gingerbread v0.20.03.2011 non MTD
Diet Gingerbread v0.20.03.2011-MTD
No wipe if coming from my roms, re-install gapps (link below)
v0.16.03.2011
Updated Phone.apk
in-call and incoming call touch UI
kernel below included 528/245 max 710
No wipe needed, if coming from roms below, reflash gapps
Diet gingerbread v0.16.03.2011 non MTD
Diet gingerbread v0.16.03.2011-MTD
v0.13.03.2011
This is almost 2.3.3 I had some issues with cam with a few updates.
Facebook sync is fixed I believe
Soundrecorder with launcher shortcut added (I changed default to amr from 3gpp recording, I can post the 3gpp version if you want it)
Diet Gingerbread v0.13.03.2011 not for custom MTD
Diet Gingerbread v0.13.03.2011 w/MTD
I wiped this time, you should be able to just upgrade though, reinstall gapps
Google apps
Google apps( minimal package, get the rest from the market)
Full google apps (go to market and see if there are updates)
New kernel
I see some of you want a 710 kernel, well I did it for you, I added min and max at boot so it boots at 528/245 default, use setcpu to set to whatever you like, you can also select several different governors.
Flash over any of the roms here. Remember it's 528 default, so if you set to high and you reboot or lockup it will boot at 528 next time, once you find a stable frequency check set at boot in setcpu.
710 Diet Gingerbread kernel
Stand alone kernels (can be flashed back and forth without wipe)
528mhz kernel (if you have force closing try this please) also best battery life!
576mhz kernel (stock in rom)
614mhz kernel
Alternate gps.config files
Euro GPS config (flash this if you are having GPS issues in Europe)
Asia GPS config (flash this if you are having GPS issues in Asia)
Mixed results on 6.35.10.18 radio, radio 6.35.16.19 recomended. Upgrade your radio here
Custom MTD:
first before anything run this either in term or using adb (only "df" in term)
Code:
adb shell df
you should get something like this
Code:
[email protected]:~/android/system$ adb shell df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 98100 32 98068 0% /dev
tmpfs 98100 0 98100 0% /mnt/asec
tmpfs 98100 0 98100 0% /mnt/obb
/dev/block/mtdblock3 174080 106820 67260 61% /system
/dev/block/mtdblock5 169728 114684 55044 68% /data
/dev/block/mtdblock4 133120 2048 131072 2% /cache
/dev/block/loop0 1024 1024 0 100% /system/lib/modules
/dev/block/loop1 2816 2816 0 100% /system/fonts
/dev/block/mmcblk0p2 468331 8226 435120 2% /sd-ext
/dev/block/vold/179:1
7216340 5608896 1607444 78% /mnt/sdcard
/dev/block/vold/179:1
7216340 5608896 1607444 78% /mnt/secure/asec
K0HNKCLLUN"]
look at "/dev/block/mtdblock3 174080 106820 67260 61% /system" and "/dev/block/mtdblock4 133120 2048 131072 2% /cache"
I used "mtd 108 3" in my mtdpartmap.txt
Download DGB-recovery-v1.5.8-CustomMTD_S.zip
These instructions are from firerats thread (recommended reading material) modified a little for my use.
Install Instructions:
Download DGB-recovery-v1.5.8-CustomMTD_S.zip
Download DGB-boot-v1.5.8-CustomMTD_S.zip
Create mtdpartmap.txt and put on /sdcard/ see configuration above or in Firerats thread < recomended
reboot to recovery
nandbackup
wipe cache + data
flash DGB-recovery-v1.5.8-CustomMTD_S.zip
reboot to recovery ( reboot and hold Home )
Flash Diet_GB_carz_v0.090-signed.zip
Flash gapps if you want them
Flash DGB-boot-v1.5.8-CustomMTD_S.zip
reboot
Click to expand...
Click to collapse
The above is what I did and I'm running fine right now,
Code:
[email protected]:~/android/system$ adb shell df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 98100 32 98068 0% /dev
tmpfs 98100 0 98100 0% /mnt/asec
tmpfs 98100 0 98100 0% /mnt/obb
/dev/block/mtdblock3 110592 106824 3768 97% /system
/dev/block/mtdblock5 363264 113212 250052 31% /data
/dev/block/loop0 1024 1024 0 100% /system/lib/modules
/dev/block/loop1 2816 2816 0 100% /system/fonts
/dev/block/mmcblk0p2 468331 8227 435119 2% /sd-ext
/dev/block/mmcblk0p2 468331 8227 435119 2% /cache
/dev/block/mtdblock4 3072 788 2284 26% /dev/cache
/dev/block/vold/179:1
7216340 5665644 1550696 79% /mnt/sdcard
/dev/block/vold/179:1
7216340 5665644 1550696 79% /mnt/secure/asec
55 > 250 on data
Thanks anyone who put effort into making Gingerbread for our old phone possible.
Archive:
v0.090
removed boot animation, push one to /system/media/ if you want one
now has custom MTD support (explained at bottom, scroll down) Thank you Firerat and Ibcoder
Dietgingerbread v0.090
coming from v0.081
I only wiped cache and data as explained below
If this is a first install wipe everything
v0.081
DietGingerbread v0.081
no wipe if coming from v0.03 up re-flash gapps
v0.080
no wipe if coming from v0.03 up re-flash gapps
DietGingerbread v0.080
Flash this to fix ext mount (also works on v0.070/1)
v0.071
no wipe if coming from v0.03 up re-flash gapps
DietGingerbread v0.071
v0.06
No wipe if coming from v0.03 up, flash gapps again.
DietGingerbread v0.06
v0.05
No wipe needed if you flash the full gapps after rom
DietGingerbread v0.05
v0.03
DietGingerbread v0.03
sorry you may need to wipe, I didn't but had to re install gapps after and everything else updated from the market on it's own.
v0.01
Gingerbread for sapphire 6355 (still v0.01 kernel, flash prefered kernel)
Wow, 6.35 radio Gingerbread ROM with working Cam actually happened. I thought that's impossible thing to do. Thanks OP for all hard work you put in this. Will test in next couple of days and report back. HTC Magic is still alive and kicking almost 2 years after being release.
Nice work carz !!!
You need to put a donate link.
I think you're the last dev dedicated to the 32a 6.35.
giant_rider said:
Nice work carz !!!
You need to put a donate link.
I think you're the last dev dedicated to the 32a 6.35.
Click to expand...
Click to collapse
I do have one, not sure it works, haha
If you post it, I will add it to my threads. I updated GB Cronos with your latest kernel. Hopefully I will have bug free USB.
carz, are you missing AudioPara4.csv?
giant_rider said:
carz, are you missing AudioPara4.csv?
Click to expand...
Click to collapse
not that I know of, it flashes when detecting 6.35 radio
its in system/etc/.audio it unzips as needed when installing the rom
I just noticed it gets extracted during execution of the any kernel script from ezterry.
I could have got rid of all that but its much easier to repo sync this way
great effort carz! 2 thumbs up for you. hehe...
anyway, does voice search worked with this rom?
one more thing, does button backlight glows in this rom? i mean, when we click/screen on because in Giant's cronos version doesnt worked (correct me if im wrong, sorry Giant im not to blame you, but i love to have it glows, if possible hee....)
anyway great job to both carz and giantrider...
I'm trying to see if I can pull some of your stuff out and flash over GB Cronos latest build.
Not sure why. At this point I should sleep. If it works I will end up with a faster GB Cronos, working USB (thx to you), but Youtube and Gmail will not work.
albert emmer said:
great effort carz! 2 thumbs up for you. hehe...
anyway, does voice search worked with this rom?
one more thing, does button backlight glows in this rom? i mean, when we click/screen on because in Giant's cronos version doesnt worked (correct me if im wrong, sorry Giant im not to blame you, but i love to have it glows, if possible hee....)
anyway great job to both carz and giantrider...
Click to expand...
Click to collapse
Sure they do
Just tested voice search. it worked fine.
No offense taken Albert....carz is actually compiling himself....I'm not
But thanks for the comment, I did not even notice the back light issue.
carz....maybe I should pack it in and we focus on one solid 32a 6.35 rom.....yours is currently the least buggy I think....if people confirm that then it only makes sense....
giant_rider said:
carz....maybe I should pack it in and we focus on one solid 32a 6.35 rom.....yours is currently the least buggy I think....if people confirm that then it only makes sense....
Click to expand...
Click to collapse
Hey I'm game, when you need something let me know.
Anyone flash it yet?
carz12 said:
Hey I'm game, when you need something let me know.
Click to expand...
Click to collapse
LOL, I meant I should retire my ports and focus on your build not the other way around
I guess we'll see what makes sense....
flashing now
just had to nandroid, change radio and spl, and hey-ho were going for a boot
Related
WWARNING:You must Have The Correct Radio and Latest SPL! You can find them here (RADIO MUST BE INSTALLED FIRST) You can find it here
PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!
AOSP Eclair (CyanogenMOD) forked source compiled by JAC. Thanks to Cyanogen for making the source public. Source available here http://github.com/cyanogen And of course Thanks to all the devs on XDA and in the Android community in general for making Android better for the masses.
Install as usual please wipe for good measure. The Danger/Haykuro SPL is required folks as stated above.
If you like what I do consider donating here
We are no longer on 2.01 source. If you are using beta3 with 2.01 source please upgrade to the current stable 1.0 which is compiled using 2.1 source.v1.0 2.1 source was release on 1/27/2010
xROM-Eclair-1.1
-G1/MT3G support
-2.1 AOSP Source with tons of enhancements by Cyanogen and JAC
-5 Screen Launcher.apk
-MT working in Browser.apk and Gallery.apk
-Swipe gestures in Gallery.apk
-Modded Settings.apk with Ext partition info
-A2SD support for ext2/3/4 partitions with noatime etc
-safe boot and shutdown eg. checks for fs corruption
-Cgroup tweaks
-Gallery3D
-Wysie's phone.apk
-Voice to Text service working
-working livewallpapers thanks to jubeh
-lib updates
-Camera lib from (Ncommander)
-Modified APN list
-Reboot option from the power button
-Amazon MP3
-FLAC support
-VM tweaks
-Tether support for USB and WiFi
-TCP optimizations
-Tons of etra modules CIFS AUFS etc
-ZipAligned and Png opt
-RIL tweaks
-Commandline extras: powertop etc
-lock home app in memory control from spareparts.apk
-Compcache control from spareparts.apk
-WifiTether for Eclair included
Kernel
-2.6.29.6-jac kernel compiled for Eclair
-Eclair 2.0 MT API
-Modified RAMdisk for Eclair with trigger support for init.rc etc
-Nexus sdcc driver
-ext2/3/4 FS support
-Squashfs 4.0 and AUFS support
-CPU scaling and freq tweaks
-Deadline I/O fifo=1
Compcache modules compiled with the latest source (01/14/2010)
-many more tweaks for speed and stability
Changelog:
Memory leaks in openssl fixed
Su request issues fixed
reverted vendor.apk
removed provision.apk
VM Tweaks
updated contacts.apk
Download
xROM Eclair 2.1 Stable v1.1 www.justanotherdev.slackdev.com/xROM-Eclair-2.1-1.1.zip
MD5:89395fa568446454aa667a52d751b83e
xROM Eclair Dark www.justanotherdev.slackdev.com/xROM-Eclair-2.1-1.1Dark.zip
MD5:a457d2793e4a89ce48daefba781a0d79
Follow me on Twitter
Source from Cyanogen Many thanks! Heres a quick rundown on building for Cyanogen
You will need to have the standard build envrionment setup for Android available at http://source.android.com/download
The source is available to be repo'd from repo init -u git://github.com/cyanogen/android.git -b eclair
then
build as usual make sure to check out the Cyanogen vendor trees and include the buildspec.mk with this data below
TARGET_PRODUCT:=cyanogen_dream_us
TARGET_BUILD_VARIANT:=eng
TARGET_BUILD_TYPE:=release
You may run into some issues with @Override and Java 5 as well as other misc issues I had to overcome. The most recent repo does not build as is..will try and get more info up soon
first =), glad to see you back JAC
Working great for me! Flashed from CM 4.2.11.1 without wipe with no f/c's or problems.
Would be nice if you could include bash and nano, but I can manually push them over from CM. Just waiting for a ram hack version of the kernel
senab said:
Working great for me! Flashed from CM 4.2.11.1 without wipe with no f/c's or problems.
Would be nice if you could include bash and nano, but I can manually push them over from CM. Just waiting for a ram hack version of the kernel
Click to expand...
Click to collapse
I enjoy ram hacks, but they seem to break bluetooth for eclair roms. Gonna flash this later and see how it is, I'm sure it will be good though.
Nice to see you back JAC
justanothercrowd said:
-Reboot option from the power button
Click to expand...
Click to collapse
where can i find this in the Source?
Does this include the modifications in Phone.apk that Cyanogen uses in his current builds?
Long press the power buton, you'll find the reboot option.
pj_bj said:
Long press the power buton, you'll find the reboot option.
Click to expand...
Click to collapse
He wants the source for it, meaning he wants to be able to either, 1) Make his own rom and include this feature, or 2) Wants to pt it in an existing rom
Glad to see you back. Can't wait to flash.
E: Can't chown/mod /system/xbin/busybox (no such file or directory)
E: Failture at line 23: set_perm 0 0 04755 SYSTEM:xbin/b
Installation aborted.
This comes when i try to flash over my wiped CM 4.2.11.1 on T-Mobile G1
bluedragon1982 said:
E: Can't chown/mod /system/xbin/busybox (no such file or directory)
E: Failture at line 23: set_perm 0 0 04755 SYSTEM:xbin/b
Installation aborted.
This comes when i try to flash over my wiped CM 4.2.11.1 on T-Mobile G1
Click to expand...
Click to collapse
You need the Danger/Haykuro/Death spl
JAguirre1231 said:
You need the Danger/Haykuro/Death spl
Click to expand...
Click to collapse
justanotherdev via twitter
@bluenazgul it should fit on the stock SPL..i havent actually tested that though
but i dont want to change SPL cuz the warranty
I would like to make a port for 32A/EBI1, where can i find the source code of 2.6.29.6-jac kernel?
The Gapps you're using on this rom are from the milestone dump, huh?
Do you know exactly what it was that cyanogen did to fix the Google Sync problem?
I'd like to get that change into my AOSP build. I haven't looked (or even cloned) the source yet, but I've got a hunch it's something he changed on his sync provider. Guess I'll check out the source.
welcome back,JAC!
Just flashed xROM Eclair/AOSP, I had to admit it's awsome one. It takes 4 mins for the first reboot, that's the fastest first reboot amoung all the eclair roms i've flashed. But for me , there are some problems:
1. I've got android.process.acore FCs for several times.
2. There's no swap support for this rom by default, when I add swap, the phone seems to be faster. Is swap recommended for this rom?
3. I use Mybackup Pro to backup my phonebook, but only 25 of my 500contacts will be restored, which never accured on donut and cupcake.
Thanks JAC for your excellent roms and happy new year.
bluedragon1982 said:
justanotherdev via twitter
@bluenazgul it should fit on the stock SPL..i have not actually tested that though
but i dont want to change SPL cuz the warranty
Click to expand...
Click to collapse
I'm sure you can roll back to stock spl at any time, and the haykuro spl brings so much more space for apps and such. Anyways the only thing I can see if you need to use the warranty is if you brick, but if you do that then they can't see what spl you have anyway
waaaaaaat a new xrom took so long thank u
Amazing!!
Incredibly fast. Animations are sweet! Flashed this over wesgarners Y rom. No problems that i noticed. Didnt get to try out BT. Played Zilch.... Whoa so fast!!!!
Thanks to you, Cyanogen, Et al.....
This recovery & patch allow installation of AOSP based ROM (CyanogenMod/OpenDesire/DeFrost) with partition sizes set to match that of Nexus One.
No more need for Apps2SD hacks!
It is very easy to install, however requires security to be disabled on your device (S-OFF in FASTBOOT).
Steps to install:
1. Download AOSP Based ROM to your SD card.
2. Download nexified-boot-patch-v1.0.0-bravo.zip to your SD card.
3. Reboot in Fastboot
4. Fastboot flash recovery nexified-recovery-clockwork-2.5.0.7-bravo.img
5. Reboot into recovery
6. Wipe data/factory reset
7. Flash ROM
8. Flash nexified-boot-patch-v1.0.0-bravo.zip
9. Reboot & Enjoy
Both the recovery, and the boot patch, have kernel cmdline:
Code:
mtdparts=msm_nand:[email protected](misc),[email protected](recovery),[email protected](boot),[email protected](system),[email protected](cache),[email protected](userdata)
Advantage is more space on DATA, whilst keeping phone as close to AOSP as possible. Nexus One is current developer phone, and it's partition sizes are 145MB for system, 197MB for data, 95MB for cache, same as what this patch achieves. Meaning your phone is as close to Android/AOSP as Google intended.
The patch also removes "dalvik.vm.dexopt-data-only=1" from build.prop which places dalvik-cache on the cache partition as per AOSP.
I have done this to my phone and am personally very happy with it, I have restored all my apps and still have 70MB free in data, and dalvik-cache resides in cache.
My current partitions are:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 208092 0 208092 0% /dev
tmpfs 208092 0 208092 0% /mnt/asec
/dev/block/mtdblock3 148480 118376 30104 80% /system
/dev/block/mtdblock5 202368 130124 72244 64% /data
/dev/block/mtdblock4 97280 46536 50744 48% /cache
/dev/block/vold/179:1
7431564 5484240 1947324 74% /mnt/sdcard
/dev/block/vold/179:1
7431564 5484240 1947324 74% /mnt/secure/asec
/dev/block/dm-0 3124 1504 1620 48% /mnt/asec/com.google.android.stardroid-1
Warnings:
Do not flash radio via recovery, only via fastboot. You should not be flashing radio via recovery anyway, it is strongly discouraged.
Credits:
AlphaRev - for bringing S-OFF to HTC Desire
Firerat - for the original mtd patch which I learned a lot from.
Lbcoder - for the initial information on how to modify partitions via kernel commands, i learned a lot from him as well.
Skraw ( CM forums ) - for getting lbcoder interested
Koush - for AnyKernel
Cyanogen & Co - for giving us all such great ROMs to play with
Amon_RA and Koush - for giving us something to patch
Kali- for porting CM6 to Desire thanks a bunch
I am doing this to try and spark further interest in this, in the hopes that other developers may improve on it, as the default partition sizes on the desire are crap.
How to uninstall / set partitions back to normal:
Boot into Fastboot
Fastboot flash standard/unmodified clockwork recovery or amon_ra
Reboot into recovery
Wipe data/factory reset
Flash ROM & Reboot
Downloads:
nexified-recovery-clockwork-2.5.0.7-bravo.img
nexified-boot-patch-v1.0.0-bravo.zip
Should this work with OpenDesire 0.34,too?
And do we need the recovery al the time? Or can we use an other one like PsfMod after flashing the update?
nice work.....
back in a flash
xtcislove said:
Should this work with OpenDesire 0.34,too?
And do we need the recovery al the time? Or can we use an other one like PsfMod after flashing the update?
Click to expand...
Click to collapse
No, the partition sizes are passed as kernel parameters, so recovery & ROM must be patched to use the same parameters.
so what are the advantages of this?
i see data is 197mb, does this mean that there is about 70mb+ storage space for apps?
thanks for your hard works
Well done!
Very brave of you to almost brick your device (twice?) and continue development nonetheless.
I don't need it, but many others will love this. Thanks a lot.
If I follow your procedure am I stuck on nightly-132, or once i've got the resized partitions can I continue to flash CM6 nighlites?
These kernel parameters:
Code:
mtdparts=msm_nand:[email protected](misc),[email protected](recovery),[email protected](boot),[email protected](system),[email protected](cache),[email protected](userdata)
Where exactly are they set? I assume it's somewhere inside the boot.img?
I am on CM602 with kernel update1 and psfmod unrevoked recovery. No chance of me getting the extra space for apps?
great works on my Desire..Thanks daedelus82 and other persons...I see 197 Mb on available space..
Thank you very much daedelus, i was waiting for this since the day s-off was released
Could you upload a version of the stable CM6 too?
Great Work! I hope this becomes the norm, we need that /system space for apps.
Excellent! At last! Thank you very much!
aleksei87 said:
Thank you very much daedelus, i was waiting for this since the day s-off was released
Could you upload a version of the stable CM6 too?
Click to expand...
Click to collapse
Hello, yes I will patch CM6.0.2 stable as well. I have to go to work now but within a few hours. I will also try to answer other questions but have to run right now.
Please note, this WILL break 'fastboot flash' functionality.
But it's a nice intermediate way of doing things. There might be a HBOOT release with different partition tables (for example, one for Sense, one for AOSP roms).
That is currently under development.
marinierb said:
These kernel parameters:
Code:
mtdparts=msm_nand:[email protected](misc),[email protected](recovery),[email protected](boot),[email protected](system),[email protected](cache),[email protected](userdata)
Where exactly are they set? I assume it's somewhere inside the boot.img?
Click to expand...
Click to collapse
Yes, boot.img for ROM, and recovery.img for recovery
djind said:
I am on CM602 with kernel update1 and psfmod unrevoked recovery. No chance of me getting the extra space for apps?
Click to expand...
Click to collapse
Sorry I have patched CM and Clockwork Recovery only.
ieftm said:
Please note, this WILL break 'fastboot flash' functionality.
But it's a nice intermediate way of doing things. There might be a HBOOT release with different partition tables (for example, one for Sense, one for AOSP roms).
That is currently under development.
Click to expand...
Click to collapse
Only breaks fastboot flashing of system and/or userdata, as fastboot will flash it to different blocks than the kernel is using. All other partition locations/blocks are unmodified meaning flashing of recovery, boot, and radio will be fine.. Also if you flash userdata, system, and boot all at same time it will also work, as overwriting boot will remove the kernel cmdline.
Would love to see a HBOOT implementation of this that does not require kernel modifications.
cgrec92 said:
so what are the advantages of this?
i see data is 197mb, does this mean that there is about 70mb+ storage space for apps?
thanks for your hard works
Click to expand...
Click to collapse
Advantage is more space on DATA, whilst keeping phone as close to AOSP as possible. Nexus One is current developer phone, and it's partition sizes are 145MB for system, 197MB for data, 95MB for cache, same as what this patch achieves. Meaning your phone is as close to Android/AOSP as Google intended.
I have done this to my phone and am personally very happy with it, I have restored all my apps and still have 70MB free in data, and dalvik-cache resides in cache.
My current partitions are:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 208092 0 208092 0% /dev
tmpfs 208092 0 208092 0% /mnt/asec
/dev/block/mtdblock3 148480 118376 30104 80% /system
/dev/block/mtdblock5 202368 130124 72244 64% /data
/dev/block/mtdblock4 97280 46536 50744 48% /cache
/dev/block/vold/179:1
7431564 5484240 1947324 74% /mnt/sdcard
/dev/block/vold/179:1
7431564 5484240 1947324 74% /mnt/secure/asec
/dev/block/dm-0 3124 1504 1620 48% /mnt/asec/com.google.android.stardroid-1
Thanks very much for this, I'll be flashing it shortly. I have two questions if you don't mind!
Why must radio be flashed using a different method?
Is there a way for me to further shrink the system partition? From what I can see, I should be able to do with 100mb for system and still have 30+ mb free. I use a modified version of CM + GApps and I remove a ton of stuff.
Maybe something like 96 System, 64 Cache, and the rest for data? (just for the love of god make it a multiple of 16 or my OCD will break the universe)
Updated OP. Added CM6 stable v6.0.2
nawoa said:
Why must radio be flashed using a different method?
Is there a way for me to further shrink the system partition? From what I can see, I should be able to do with 100mb for system and still have 30+ mb free. I use a modified version of CM + GApps and I remove a ton of stuff.
Maybe something like 96 System, 64 Cache, and the rest for data?
Click to expand...
Click to collapse
You can patch system and cache to whatever sizes you want, it really depends on your ROM. If you have less than 96MB in your system partition then partitioning it to 96MB should be fine. I normally like to leave a few MB spare for good measure. See below for description on flashing radio from a re-partitioned recovery.
ezterry said:
Same steps as the rom, just ensure you *never* flash *any* spl or radio for any reason from a re-partitioned recovery with a cache partition that does not match the spl's actual cache start location. Or you will be in the market for a jtag adapter to fix your brick.
Click to expand...
Click to collapse
ieftm said:
There might be a HBOOT release with different partition tables (for example, one for Sense, one for AOSP roms).
That is currently under development.
Click to expand...
Click to collapse
Thx !! we are waiting for that ;-)
Hmm... Because of the radio flashing issue and because I use DT-A2SD anyway, I think I'm going to hold off on using this until there's the HBOOT solution you guys are talking about.
Crossing my fingers that all I need to do is install standard clockwork recovery then go to a standard CM build.
This thread is reserve for nightly build of CyanogenMod Rom for HTC Desire
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
What are Nightly build? Auto compiled build of the latest CyanogenMod source from github. This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Warning : Not for new user, flash this build only if you know what you are doing !!!
INSTRUCTIONS:
- First time flashing CM 7 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery.
2. Do a Nandroid backup!
3. WIPE (wipe data/factory reset + wipe cache partition)
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps, after flashing rom don't forget to flash Google Addon package if you want it.
Latest version: http://download.cyanogenmod.com/?device=bravo
before flash is recommended to check the md5sum
CyanogenMod Enhancement:
ChangeLog / Twitter
Device specific ChangeLog by igor.tonky
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
cm7 is in a development stage and for the first installation i recommend to:
1) install rom
2) reboot, skip setup wizard and setup your access point
3) reboot recovery and install gapps
4) start and follow setup wizard, when requested select desired gapps to be downloaded from market
Battery drain issue:
Set wifi sleep policy to never
settings -> wireless & networks -> wifi settings
press menu -> advanced and set wifi sleep policy to Never
press menu -> save
RIL issue:
Switching RIL is cause of know network problem:
* Unable to make a network scan
* Data connection die on asleep (only for some carrier)
CM7 HBOOT by Alpharev | xda thread
Change partition table size 130/5/302 (system/cache/size)
Require nightly #18 or newer
Upgrade instruction:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl-cm7.img'
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything, advanced restore system & data, install CM7 again (same version or a newer one).
Legacy App2SD Addon:
CyanogenMod do not officially support a2sd, i'm working on it because desire (not only) desperatly need it (cutted down Firerat script)
Bootloop free: bind mount do not cause bootloop
Zero Maintenance: no maintenance required after ROM update
Other a2sd can be used, this is just the easiest way: use recovery to partition your SD then install cm7_legacy_a2sd_rX-signed.zip
By default only App will be moved on SD
Optionally Cache and Data can be moved to SD, but is not recommended (guide)
Require GB Nightly #7 or newer
It's recommended to set the install location to "Internal" under Settings -> CyanogenMod -> Application Settings -> Install location
Before install check if /sd-ext is mounted, "quick system info" under A2SD Storage should report Total and Free space, if it report "information not available" format sd-ext from recovery.
r3: improved installation process (i hope)
r2: added data2sd and cache2sd as options
r1: first release
General App2SD Q&A:
Q: A2SD is recommended?
A: Internal storage perform better than SD, install A2SD only when low disk space warning happen
Q: How to check if is working?
A: run:
adb shell
df -h | grep /dev/block/mmcblk0p2
output should be
Code:
Filesystem Size Used Available Use% Mounted on
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /sd-ext
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /data/app
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /data/app-private
Q: I have installed a2sd addon but now i get low space warning again, why?
A: by default a2sd addon move only app, this is fine for most user but some user with more application have to move also cache and/or data.
Cache2SD can be enabled with
adb shell
/sd-ext/userinit.d/10cache2sdext-binds enable
Data2SD
adb shell
/sd-ext/userinit.d/11data2sdext-binds enable
reboot when prompted
HBOOT
All alpharev's hboot are compatible except the oxygen version
CM7 version is recommended ~270MB for app (stock 110MB, N1 195MB)
HowTo
Perform automatic backups of files in /system/ while (re-)flashing CyanogenMod
useful link
http://goo-inside.me/google-apps/
md5:
18ef81c567398a93183aff65a41a1565 cm7_legacy_a2sd_r3-signed.zip
murdock's semi official nightly replacement drugs
update 31.05.2011: buildbot is down due to hdd crash. might take a few more days to return - so here is an interims nightly for you:
mirror1: cm_bravo_full_teamdesire-20110601-1925.zip size: 84M (88037737 bytes)
mirror2: cm_bravo_full_teamdesire-20110601-1925.zip md5sum: 38591bab5df5d8f57e714f7888567bdb
Kali- said:
CyanogenMod is a free, community built distribution of Android 2.3 (Froyo) which greatly extends the capabilities of your phone.
Click to expand...
Click to collapse
You mean Gingerbread not Froyo - pedantic I know!
Great work though by the way - excellent ROM!
sykomaniac said:
You mean Gingerbread not Froyo - pedantic I know!
Great wrok though by the way excellent ROM!
Click to expand...
Click to collapse
C&P fail
10 char
andQlimax said:
I was waiting for this thread lol
Any Radio / RIL recommended?
Click to expand...
Click to collapse
no
any 5.x should work
Nice looking forward to follow this thread
Well I am not superseeding the Great Kali's saying about A2sd but Dark Tremors App2SD works ok with CM7. Just installed it onto CM7. Working great on my CM7.
Niiiceee, great work team !
rover.prince said:
Well I am not superseeding the Great Kali's saying about A2sd but Dark Tremors App2SD works ok with CM7. Just installed it onto CM7. Working great on my CM7.
Click to expand...
Click to collapse
Never tested but for what i know DT need to be flash after any update and is not bootloop free
Thank's for report
before someone ask
Oxygen HBOOT do not work, system is too small (cm7 require other 20mb)
we are working with alpharev for a CM7 specific partition layout but there are some thing concerning the /cache shrinking that requires to be developed and tested
not sure if this is a market issue or titanium backup but my apps don't appear as installed on the market after a restore. btw is the sd-ext issue fixed in cwm? read from the cwm thread of some people having issues about sd-ext not being backed up.
Kali- said:
we are working with alpharev for a CM7 specific partition layout but there are some thing concerning the /cache shrinking that requires to be developed and tested
Click to expand...
Click to collapse
Great, looking forward to it! I'm using the N1 Layout atm and it my cache is under 50MB
Code:
Filesystem Size Used Available Use% Mounted on
/dev/block/mtdblock4 95.0M 48.4M 46.6M 51% /cache
I guess a bit above 50 would be good?
btw, what would happen if the cache is full? Would it just get really slow?
MrDevil said:
btw is the sd-ext issue fixed in cwm? read from the cwm thread of some people having issues about sd-ext not being backed up.
Click to expand...
Click to collapse
just tested and the one i posted do not backup/restore sd-ext
i will post a working one later, i just noticed that my patch is still under review
Kali- said:
Never tested but for what i know DT need to be flash after any update and is not bootloop free
Thank's for report
Click to expand...
Click to collapse
I am using it personally, I have done the installation what I did.
1. Installed CM7.
2. Installed G.Apps
3. Started Phone, Installed All Apps
4. Restored Some Apps via Titanium Backup ==>Ended Up via Low Storage
5. Installed DT
6. Executed CacheSD
7. Phone Rebooted (Took Some Time to Boot)
Voilla I am happy.
cTrox said:
Great, looking forward to it! I'm using the N1 Layout atm and it my cache is under 50MB
Code:
Filesystem Size Used Available Use% Mounted on
/dev/block/mtdblock4 95.0M 48.4M 46.6M 51% /cache
I guess a bit above 50 would be good?
btw, what would happen if the cache is full? Would it just get really slow?
Click to expand...
Click to collapse
we are working for something like 5MB or less
the problem is about download and market.
for sure tmp file are stored on cache and if file size is bigger then free space download fail, not sure if there are other issue
rover.prince said:
Voilla I am happy.
Click to expand...
Click to collapse
this is the most important thing
Kali- said:
this is the most important thing
Click to expand...
Click to collapse
Kali I Love U and CM Team. Great Work with all thumbs UP.
Kali- said:
just tested and the one i posted do not backup/restore sd-ext
i will post a working one later, i just noticed that my patch is still under review
Click to expand...
Click to collapse
thanks for the info. looking forward to a rc.
will try to reflash later and restore apps with mybackup and see if it's a market or titanium issue.
How long will it take before CM7 is released in stable mod?
I'm getting tired of using Oxygen 2.0 and its bugs
Hello,
Here is Fugumod (based on http://forum.xda-developers.com/showthread.php?t=812836) ported to I5800. It allows users to convert without data loss all your filesystems to jfs/ext2/ext3/ext4/reiserfs and rfs.
Included in the image are (in Fugumod 2.4 beta3 Standard and 800Mhz edition):
Root ADB
own busybox 1.19
TUN support
No more RFS at all (if you want) (nearly, /efs stay rfs)
Compcache support
CIFS support
NFS modules
Security fixes
TinyRCU (default)
SIO Simple I/O scheduler (default)
BFQ (info : http://algo.ing.unimo.it/people/paolo/disk_sched/)
Autogroup scheduler patch v4
jhash3 patch
Support for early startup scripts (/system/etc/init.d)
Filesystems: rfs, ext2, ext3, ext4, btrfs, jfs*, reiserfs*
Support /data to sdcard
Support 1% battery steps mod
Support UV and pimpmycpu app.
Voodoo Sound v8
Overclock 800Mhz (no voltage raised)**
* : on a separate build
** : 800Mhz edition only
-----------------------------------------------------------------------------
Included in the image are (in Fugumod 2.2 Bleeding Edge version):
Like the original Fugumod, there is a "bleeding edge" version with advanced and experimental features I try to add.
/!\ This version is not STABLE and may corrupt your datas, make your phone not responding, crashing .... You have been warned /!\
Root ADB
own busybox 1.18.4
TUN support
No more RFS at all (if you want) (nearly, /efs stay rfs)
Compcache (info : http://code.google.com/p/compcache/)
CIFS support
Security fixes
TinyRCU
Support for early startup scripts (/system/etc/init.d)
SDcard speedup fix included (thx Kyrillos)
Filesystems: rfs, jfs, ext2, ext3, ext4, reiserfs, nilfs2, btrfs (will be used for /data on sdcard soon)
Overclock up to 1300Mhz : Frequencies : 83-166-333-667-866-1066-1300
500Hz
-----------------------------------------------------------------------------
Read the whole post (except the changelog) before attempting to install
THERE IS NO MORE AUTOMATIC CONVERSION.
Conversion will occurs only if a fs.convert file is present in /sdcard/Android/data/fugumod.
I suggest that you start convert /cache and see that is working and then, if OK, convert /data and /system.
Custom rom makers could use this kernel to convert the filesystem.
Requirements
You must have at least 400Mb free on your SD card storage for initial conversion if you don't have any apps installed. If you have apps already installed, you must ensure that you have at least the same size as you data storage free on the sdcard.
What does Fugumod do ?
Fugumod convert to any filesystem supported by creating a fs.convert file in the directory /Android/data/fugumod/ on the sdcard. In exemple, you want to convert /data partition (/dev/block/stl7) to ext4, just make a fs.convert file containing :
Code:
stl7 ext4
or two partitions in a row :
Code:
stl7 jfs
stl8 ext2
How to use it ?
Flash with Odin as "One package" option.
How does it work ?
Once you create your fs.convert file in /sdcard/Android/data/fugumod/fs.convert, the conversion will start on the next reboot.
Depending how many partition you want to convert and the speed of your sdcard, the process could take some times ... 5, 10, 15 minutes .. do NOT interrupt the process or you will have to reflash a whole ROM.
When the conversion process is finished, the phone start.
How to check if it worked ?
Type : adb shell mount
and look for the partition you converted : you should see your new filesystem.
Below, I converted /data (stl7) and /cache (stl8) from rfs to ext4 :
Code:
D:\android-sdk\platform-tools>adb shell mount
rootfs / rootfs rw 0 0
proc /proc proc rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/stl6 /system rfs ro,nodev,noatime,nodiratime,vfat,log_off,check=no,gi
d/uid/rwx,iocharset=cp437 0 0
/dev/block/stl7 /data ext4 rw,nosuid,nodev,noatime,nodiratime,commit=20,barrier=
1,data=ordered 0 0
/dev/block/stl8 /cache ext4 rw,nosuid,nodev,noatime,nodiratime,commit=20,barrier
=1,data=ordered 0 0
/dev/block/stl4 /efs rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,
iocharset=cp437 0 0
How to desinstall Fugumod ?
2 solutions :
- Flash a complete ROM
or
- Take a custom kernel or a standard kernel and convert all the partitions to a filesystem supported by the new kernel and then flash it.
How to change a frequency ?
You can change by yourself the frequencies in all overclocked versions of fugumod (v2.4+ only). It's possible also in the 800 Mhz edition.
There is an entry in /sys/devices/system/cpu/cpu0/cpufreq/plls_table where you can put your own value for APLL.
Before doing this, set "PERFORMANCE" governor on and min and max frequencies to the maximum
Example : in the 800Mhz edition :
Code:
# cat /sys/devices/system/cpu/cpu0/cpufreq/plls_table
index - apll
0 81900301
#
now, you can change this value and put 834Mhz (0x81a10301) on the index 0 (the highest freq):
Code:
# echo "0 0x81a10301" > /sys/devices/system/cpu/cpu0/cpufreq/plls_table
As usual, use it at your OWN risk.
This should work also with Loop based lagfix. This need to be tested more... Backup applications have not been tested already. Please give feedback.
You can find all the scripts and source code on github : https://github.com/sdadier
------ Note for startups scripts
- Put your script in /system/etc/init.d
- Scripts with Filename starting with E* (earlystartup scripts) are executed before script with filename starting with S* (users scripts)
- Scripts are executed before playlogo and after init.rc
- Log is available in /res/user.log
Thanks to nikademus the original author of fugumod and sztupy for universal lagfix initramfs.
Thanks to Supercurio for voodoo additions.
Thnaks to Cpasjuste for pimpmycpu and help.
Thanks to s3th.g3ck9, FadeFx and others I forgot for bugfixes and ideas, The Dark Lestat for cooking us the best ROM here
--> DOWNLOAD : http://code.google.com/p/fugumod-i5800/downloads/list
This project takes a lot of time and work.
Please, consider donating to help further development : http://forum.xda-developers.com/donatetome.php?u=3404423
Thanks for your support!
Changelog :
2.4 beta3 (05/20/2011) :
- Fix lags (ksm)
- Fix app2sd froyo way ... should fix data2sd
- Fix screen flickering
- Set default headphones volume to max (voodoo)
2.4 beta2 (05/18/2011) :
- Fix Conservative governor
- Fix undervolt not working on 800Mhz edition
2.4 beta1 (05/18/2011) :
- SIO scheduler
- Removed NILFS2
- Autogroup scheduler
- VS v8
- Support pimpmycpu app
- sysfs files to tweaks voltages and frequencies
- fix clicks/cuts sounds during calls
2.3 (04/11/2011) :
Removed due to severe issues
2.3 Bleeding Edge (04/11/2011) :
Removed due to severe issues
2.2 final (04/06/2011) :
- Updated ext4 with ext4-patches-for-2.6.32.11--14 (same perfs as before but more mount options supported)
- Added nilfs_cleanerd garbage collector as service (not tested)
- Compcache disabled : you can always start it with # sh /sbin/ramzswap.sh or put a script that run it in init.d
2.2 Bleeding Edge (04/06/2011) :
- Overclock s5p6442 upto 1300 Mhz : use SetCPU to set the frequencies or via /sys/devices/system/cpu/cpu0/cpufreq/ (not tested)
- Updated ext4 with ext4-patches-for-2.6.32.11--14 (same perfs as before but more mount options supported)
- Added nilfs_cleanerd garbage collector as service (not tested)
* Compiled with TinyRCU, CFQ & 500Hz
2.2 beta :
- added BFQ (default I/O scheduler)
- added init.d support
- fix SDcard speed
2.1 :
- Fixed /efs not mounting correctly
- Added TinyRCU
2.0 :
- Based on fugumod 1.8
- Arm 2010-09 g++
1.2.1 :
- fixed version
1.2 :
- Fix /efs
- add NILFS2 support (experimental)
1.1 :
- root adb
1.0 :
- Initial release
This should go to dev section... Could be useful for custom rom devs.
Sent from my GT-I5800 using Tapatalk
marcellusbe said:
Hello,
Here is Fugumod (based on http://forum.xda-developers.com/showthread.php?t=812836) ported to I5800. It allows users to convert without data loss all your filesystems to jfs/ext4/reiserfs.
Not all original features are ported but they will be if possible in the future.
Included in the image are:
- own busybox 1.18.4
- TUN support
- No more RFS at all
- compcache
- filesystems: jfs, ext4, reiserfs
- CIFS support
- security fixes
- filesystems: jfs, ext4, reiserfs, btrfs
Read the whole post (except the changelog) before attempting to install
This kernel converts all rfs based /data,/cache and /system to jfs automatically. It also makes /efs on jfs or ext4, but for safety purposes /dev/block/stl4 is still rfs formatted, but not mounted anymore.
Odin flashable kernel (select one package when flashing with odin.)
Custom rom makers could use this kernel to convert the filesystem.
You can convert to any filesystem supported by creating a fs.convert file in the directory /fugumod/ on the sdcard. In exemple, you want to convert /data partition (/dev/block/stl7) to ext4, just make a fs.convert file containing :
Code:
stl7 ext4
The filesystems conversion will occurs at reboot : dont touch your phone for about 5 min (depending how many partition should be converted).
- You don't need to do anything, just flash the kernel without repartition and wait some minutes for the first boot.
- You must have at least 400Mb free on your SD card storage for initial conversion if you don't have any apps installed. If you have apps already installed, you must ensure that you have at least the same size as you data storage free on the sdcard.
- The cleanest way to revert the mod is to reflash a complete ROM. But it also works by converting filesystems to ext4 and flash one of the numerous kernel which support full ext4
- Do NOT interrupt your first boot or you will have to reflash a full system.
As usual, use it at your OWN risk.
Tested on XXJPM, Lestatious ROM, Kyrillos V3 and InDroid 3.0 with success. This should work also with Loop based lagfix. This need to be tested more... Backup applications have not been tested already. Please give feedback.
Thank to nikademus the original author of fugumod.
Changelog :
1.0 : Initial release
Posted in general section since i could not post in dev section.
Click to expand...
Click to collapse
You're kidding right? Straight up best kernel so far if true. Does this kernel have adb root?
Sent from my Lestatious v1.4.5 Galaxy 3 FROYO
The Dark Lestat said:
You're kidding right? Straight you best kernel so far if true. Does this kernel have adb root?
Sent from my Lestatious v1.4.5 Galaxy 3 FROYO
Click to expand...
Click to collapse
looks [email protected] can we use it on your rom??
ronhoover88 said:
looks [email protected] can we use it on your rom??
Click to expand...
Click to collapse
If it has adb root, then heck yes!
Sent from my Lestatious v1.4.5 Galaxy 3 FROYO
The Dark Lestat said:
If it has adb root, then heck yes!
Sent from my Lestatious v1.4.5 Galaxy 3 FROYO
Click to expand...
Click to collapse
i flashed the kernel and i'm not getting any network on my phone...
going back to lestat's original package
To bad i don't have the g3 at my hand ATM to test this...
Looks Nice! But tell haree to move the thread in the development section!
Installed without problems. This phone is better and better thaks to you guys.
what is the improvment to Kyrillo's Rom (Ver.3.0 final) ???
Gives it a better performance, or is it something, what not everybody need?
Originally Posted by The Dark Lestat
You're kidding right? Straight you best kernel so far if true. Does this kernel have adb root?
Sent from my Lestatious v1.4.5 Galaxy 3 FROYO
looks [email protected] can we use it on your rom??
Click to expand...
Click to collapse
default.prop is :
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
You must SU to get root.
Note that Im not a kernel guru and the kernel could be optimised more.
The best thing in Fugumod is the initramfs and the pre-init.sh script that convert all the filesystems without any data loss.
Notes:
- the app Fugumodapp work with the kernel but I didnt try to use it to make a fs.convert file.
- I successfully added compcache. /dev/ramzswap0 was created and initialised but I dont know yet if it brings improvements to the phone or not.
ronhoover88 said:
i flashed the kernel and i'm not getting any network on my phone...
going back to lestat's original package
Click to expand...
Click to collapse
Really?. I got this problem one time but network get back after a reboot.
i tried rebooting but still wouldn't work
marcellusbe said:
default.prop is :
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
You must SU to get root.
Note that Im not a kernel guru and the kernel could be optimised more.
The best thing in Fugumod is the initramfs and the pre-init.sh script that convert all the filesystems without any data loss.
Notes:
- the app Fugumodapp work with the kernel but I didnt try to use it to make a fs.convert file.
- I successfully added compcache. /dev/ramzswap0 was created and initialised but I dont know yet if it brings improvements to the phone or not.
Really?. I got this problem one time but network get back after a reboot.
Click to expand...
Click to collapse
Is it possible for you to add it?
Sent from my Lestatious v1.4.5.1 Galaxy 3 FROYO
Alright. So I'm running the FuguMod 1.0 kernel. It seems to work with Lestatious 2.0 Build 1.4.5.1.
I'm getting my signal. Let's do some further testing.
Eyy.. Lestat.. So shall I flash it too??
What if it doesn't work??
How do I flash the zImage alone from your ROM??
Sent from my GT-I5801 Lestatious V2 (Build 1.4.5.1)
ron_gangte said:
Eyy.. Lestat.. So shall I flash it too??
What if it doesn't work??
How do I flash the zImage alone from your ROM??
Sent from my GT-I5801 Lestatious V2 (Build 1.4.5.1)
Click to expand...
Click to collapse
Just flash Sam's Kernel. but don't flash it yet. I'm working on things. I'm gonna release a 1.4.5.5 today.
EDIT: I'm gonna host this kernel.
The Dark Lestat said:
Is it possible for you to add it?
Sent from my Lestatious v1.4.5.1 Galaxy 3 FROYO
Click to expand...
Click to collapse
Done in v1.1. See 1st post.
Yes!! Thank you very much!
EDIT: Using this as the base kernel for Lestatious
The Dark Lestat said:
Yes!! Thank you very much!
EDIT: Using this as the base kernel for Lestatious
Click to expand...
Click to collapse
but use and test the kernel for 1 or 2 day... just to make sure it work flawlessly.
I run this kernel on I5801 without any problem too.
marcellusbe said:
but use and test the kernel for 1 or 2 day... just to make sure it work flawlessly.
I run this kernel on I5801 without any problem too.
Click to expand...
Click to collapse
Sure thing!
CyanogenMod 13 by ivanichFeatures:
3.4 kernel with latest patches
USB-OTG
Stable enough to be daily driver
Fully working camera
In kernel mp-decision
Bugs:
Major:
None
Minor:
All CyanogenMod upstream bugs
Downloads:
CM13
GAPPS
Sources:
ivanich's GitHub
Changelog:
Kernel Changelog
ROM Changelog
TWRP Recovery:
Download
XDA:DevDB Information
CyanogenMod13 by ivanich, ROM for the HTC Sensation
Contributors
ivanich, shantur
Source Code: https://github.com/ivanich?tab=repositories
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: HBOOT 1.27/1.29
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-10-29
Last Updated 2016-09-07
FAQ
Q: I got Error 7 in recovery while flashing ROM
A: Reflash ROM one more time
Q: I flashed Opengapps and now my keyboard crashing
A: Read this and especially "Skip Google's Swype Library Setting".
If you are not smart enough to understand official Opengaps FAQ you have 2 options:
1. Create gapps-config.txt with skipswypelibs keyword inside it, and place it in the same folder as the Open GApps zip. Then flash gapps package.
2. Or remove /system/lib/libjni_latinimegoogle.so from recovery.
Q: I flashed Opengapps and now SetupWizard crashes
A: You must flash Opengapps just after ROM clean install and not after reboot.
Q: I have huge battery drain
A: Buy a new battery, stop using monster apps like skype, facebook and other crap.
Q: Where is FM radio?
A: Forget about it, support for our BCM4329 was dropped from AOSP a long time ago, or you can try SpiritFM(which is outdated and cause issues with audio)
Q: Booting stuck at the HTC logo
A: You are S-ON. Flash boot.img "fastboot flash boot.img" or even better perform S-OFF with rumrunner.
FIRST
Getting error binary in zip while flashing through twrp, and with adb sideload no os installed, do we have to flash newest twrp image? I have ext4(4gb) partition btw.
not working..... i think sd ext4 partition needed.
EDIT : not working with sd partitioned
Empty folder ?
Ok just installed cm-13-20151030-UNOFFICIAL-pyramid.zip, I had to use sideload to flash it. TRWP_r6 gave me status 7 error and rom wouldn't build dalvik.
With sideload, no issues but after bootanimation, screen was black except status bar, bout a minute later device soft reboots and welcome, cyanogenmod setup wizard. I also flashed my mod successfully too for more storage
ROM seems quick and looks good so far, I think sdcard might not be linked properly because when saving a screenshot and looking at it's details, it says Path: /storage/emulated/0/Pictures/Screenshots/...
Code:
[email protected]:/ # ls /data/media/0
Alarms
Android
DCIM
Download
Movies
Music
Notifications
Pictures
Podcasts
Ringtones
storage
My data partition is on sd-ext (4.5G) but storage setup is different
Code:
[email protected]:/ # df
Filesystem Size Used Free Blksize
/dev 303.3M 56.0K 303.3M 4096
/sys/fs/cgroup 303.3M 12.0K 303.3M 4096
/mnt 303.3M 0.0K 303.3M 4096
/firmware_radio 199.8M 21.5M 178.3M 4096
/firmware_q6 199.8M 5.8M 194.0M 4096
/devlog 19.7M 4.1M 15.6M 4096
/system 787.4M 452.9M 334.5M 4096
/cache 1.2G 280.8M 912.0M 4096
/data 4.5G 351.2M 4.2G 4096
/storage 303.3M 0.0K 303.3M 4096
/data/dalvik-cache 1.2G 280.8M 912.0M 4096
/mnt/runtime/default/emulated 4.5G 351.2M 4.2G 4096
/storage/emulated 4.5G 351.2M 4.2G 4096
/mnt/runtime/read/emulated 4.5G 351.2M 4.2G 4096
/mnt/runtime/write/emulated 4.5G 351.2M 4.2G 4096
/mnt/media_rw/06A6-765E 25.2G 15.2G 10.0G 16384
dowload
downloading
hinxnz said:
Ok just installed cm-13-20151030-UNOFFICIAL-pyramid.zip, I had to use sideload to flash it. TRWP_r6 gave me status 7 error and rom wouldn't build dalvik.
With sideload, no issues but after bootanimation, screen was black except status bar, bout a minute later device soft reboots and welcome, cyanogenmod setup wizard. I also flashed my mod successfully too for more storage
ROM seems quick and looks good so far, I think sdcard might not be linked properly because when saving a screenshot and looking at it's details, it says
Click to expand...
Click to collapse
I had similiar problems with all cm13 zips xD. You need to go into Storage and USB then internal, copy any file, than do this.., and sd card will show up.
Sent from my HTC One_M8 using Tapatalk
Its amazing,thanks !!!!
Aoudio bug
Imotep95 said:
I had similiar problems with all cm13 zips xD. You need to go into Storage and USB then internal, copy any file, than do this.., and sd card will show up. View attachment 3526043View attachment 3526044
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Yeah I didn't test for long, bout half hr or so, cos kinda busy and main devices but yeah I found that some of the os reads the storage but with very limited permissions, apps like browser fc when trying to download because of storage location I guess, it kind of half set up like a nexus. That's how I posted the screenshots by copying the files from /data/media/0 to /mnt/media_rw/{sdcard no.?}. I couldn't install apks normally either and I also found that apks in system now have to be signed.
hinxnz said:
Yeah I didn't test for long, bout half hr or so, cos kinda busy and main devices but yeah I found that some of the os reads the storage but with very limited permissions, apps like browser fc when trying to download because of storage location I guess, it kind of half set up like a nexus. That's how I posted the screenshots by copying the files from /data/media/0 to /mnt/media_rw/{sdcard no.?}. I couldn't install apks normally either and I also found that apks in system now have to be signed.
Click to expand...
Click to collapse
What was your way of installing apk? and if you used gapps which one?
pbazw said:
What was your way of installing apk? and if you used gapps which one?
Click to expand...
Click to collapse
I just pushed some to system but you could try install with adb
Code:
adb install <path to apk>
Edit: I didn't try any gapps.
IIRC I think you can install playstore and then download google play services via playstore.
sideload
hinxnz said:
I just pushed some to system but you could try install with adb
Code:
adb install <path to apk>
Click to expand...
Click to collapse
Ths. one more sideload not starting any ideals?
pbazw said:
Ths. one more sideload fells to start any ideals?
Click to expand...
Click to collapse
Update to Android Debug Bridge version 1.0.32, connect device, start sideload on device first in recovery, I used latest TWRP r6, then enter adb command.
Code:
adb sideload <path to rom.zip>
[share] temporary fix for alpha update
File Explorer and Quickboot app flashable through recovery. (for people who are facing problem in alpha update).
First root your device and flash Beta SuperSU
EDIT: Everything is working fine now
Keyboard
Getting FC with ASOP keyboard
Moderator Information,
I have cleaned the thread. I have also checked the download link and it is there. If you have an issue, do not leave flaming messages on the thread, but report it to the moderators and let us deal with it.
Many thanks,
Stephen
First of thanks @ivanich for 20151101 build. Usb mass storage issue is fixed now I can transfer file through my pc.
Thanks @Khizar Ali for your flashable zip it saves my day. ES File explorer is now fully working (on 20151101 build not for 20151030) and also Quickboot because advance reboot option is no longer available .
2nd that
Usman Zen said:
First of thanks @ivanich for 20151101 build. Usb mass storage issue is fixed now I can transfer file through my pc.
Thanks @Khizar Ali for your flashable zip it saves my day. ES File explorer is now fully working (on 20151101 build not for 20151030) and also Quickboot because advance reboot option is no longer available .
Click to expand...
Click to collapse
This rom is excellent and thank you to those whom have had it so, It's only been a day but outside the Bluetooth bug with the rom and and a working google apps . I must say this can be used as is as a daily driver.:good::good: