Bricked Phone? Can't mount internal sd card - Captivate General

I was trying to install cyanogen 7 on my captivate when I got an error about a missing kernel file or something, when I reboot my phone it says "convert data partition, system data not available"
When I boot into clockwork and try to do anything that involves reading off of the sd card I get an error that says "error mounting sdcard" I can however navigate the menus and even get into download mode.
Odin will not recognize my phone at all but my computer does..

Odin should see your phone. Are you in download mode? Make sure development option is checked and DON'T MOUNT YOUR PHONE. Also try opening Odin BEFORE you plug in your phone. Plug in again if Odin doesn't see it the
Sent from my SGH-I897 using XDA App

nevermind, got Odin to recognize it somehow and flashed back to stock. I'm gonna re-root it and put on andromeda 2.1

breakyourface said:
nevermind, got Odin to recognize it somehow and flashed back to stock. I'm gonna re-root it and put on andromeda 2.1
Click to expand...
Click to collapse
you may need a jig just in case, build one by yourself or buy one online.
http://cgi.ebay.com/ws/eBayISAPI.dl...25272&ssPageName=STRK:MESELX:IT#ht_595wt_1139

I am having a similar issue with my att samsung captivate. I went from 2.2 to cyanogemod 7.1.0
Phone worked for a few days, then won't mount internal sd. Says "Damaged sd card. You may need to reformat." However when you do it does nothing. Have tried reflashing rom. Will mount in cwm recovery, but not cyanogenmod. Odin will not recognize. Computer won't recognize. Will go into download mode.
Does anyone have any ideas?
Thank you so much.

Related

Is it A Brick?

So I've searched the forums for an answer to my question and haven't found anything so here it goes...
I downloaded BB v5 from Pete's site and went through one-click root and flashing my rom, and backing up my device. I mounted my SD card to my computer moved bugless beast over to my root, renamed it 'update' and powered off my phone. Powered in recovery and tried to reinstall packages and got an error: error at installation, installation aborted error at write_raw_data or something to that effect. google'd and came to the conclusion that through me trying to hurry to download BB i did not wipe/clear data. Now my phone sits at the "AT&T World Phone" screen and will not go any further. Tried to power down and power back up in recovery and don't have the access to restore my backups. tried to plug my phone back into my computer and i can not access my SD card from my computer to delete the BB zip and add the original 'update' zip. Tried to enter download mode and run Odin3 but still can not access my SD card, so Odin doesn't run, just says 'complete' I'm assuming because it can't find the device.
I've heard these phones are hard to truly 'brick'. Please tell me someone can help me and tell me that this is fixable.
Thanks,
A
Which odin did you use? Odin 1 click jf6? If not you should try that. Dl mode, plug in, press start. It should boot.
Sent from my GT-I9000 using XDA App
xcentrik05 said:
So I've searched the forums for an answer to my question and haven't found anything so here it goes...
I downloaded BB v5 from Pete's site and went through one-click root and flashing my rom, and backing up my device. I mounted my SD card to my computer moved bugless beast over to my root, renamed it 'update' and powered off my phone. Powered in recovery and tried to reinstall packages and got an error: error at installation, installation aborted error at write_raw_data or something to that effect. google'd and came to the conclusion that through me trying to hurry to download BB i did not wipe/clear data. Now my phone sits at the "AT&T World Phone" screen and will not go any further. Tried to power down and power back up in recovery and don't have the access to restore my backups. tried to plug my phone back into my computer and i can not access my SD card from my computer to delete the BB zip and add the original 'update' zip. Tried to enter download mode and run Odin3 but still can not access my SD card, so Odin doesn't run, just says 'complete' I'm assuming because it can't find the device.
I've heard these phones are hard to truly 'brick'. Please tell me someone can help me and tell me that this is fixable.
Thanks,
A
Click to expand...
Click to collapse
Restore stock then try again. I will be moving this thread since its not really a dev thread.
http://forum.xda-developers.com/showthread.php?t=731989
tiger4j said:
Which odin did you use? Odin 1 click jf6? If not you should try that. Dl mode, plug in, press start. It should boot.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You have this wrong, to properly use odin you need to:
-Open Odin
-Power down phone/remove batter (some people suggest removing sim and sd card)
-Plug phone to computer while holding the vol buttons or just up or down depending on phone
-Phone should get to download mode and press start
If this doesn't work its possible your three button combo is dicked.
It worked! thanks for the help guys. I had the phone in download mode before i opened odin, odin cleaned me, sorry for being a noob
Again, thanks for the help guys

[Q] Sprint Nexus S 4g bricked: HELP!

Welp, tried to root the Nexus S 4g.
On rebooting, it gets stuck at the Nexus S bootscreen, pauses, keeps going, etc.
Got CWM 3.0.0.5, and can fastboot, get into CWMRecovery.
From there, I'm at a loss. Tried to restore Nandroid backup, but it says a whole bunch of stuff, basically saying E: failed to find "cache" partition, Can't mount /cache/recovery/last_log, etc.
Tried to apply zip from CWM backup, it says "No files found."
Tried going into mounts/storage to mount USB storage, but nothing appears on desktop of either Mac or PC, so I can't get move files onto the SD card.
Now, when I just power up, it just says "Google," and there's a unlock icon at the bottom. Nothing else.
Anyone have any solutions?
Yeah stop using that old version. Of ClockworkMod recovery
Seriously use 3.0.2.4. Its in the clockwork thread in the dev section.
Sent from my Nexus S using XDA App
Would if I could, but I can't get anything on the SD card!
Trying to mount USB storage from CWM-- no drive shows up on Mac or PC for me to move stuff onto it.
Boot into fastboot by turning off phone, turn back on while holding volume rocker up. Leave it at the screen where you could select reboot, recovery etc. Download the above mentioned clockwork recovery image from the thread to your computer. Flash using fastboot command. No need to copy anything to SD card.
Sent from my Nexus S using XDA App
Having the exact same issue. Nothing appears in the nandroid folder now either after replacing the recovery image with 3.0.2.4 and I can't mount the USB storage or get anything onto the SD card. Phone won't boot. Unsure of the folder structure on this phone to try pushing a file with adb or fastboot.
Same issues here. I was able to flash CWM recovery 3.0.2.4, but when I go to "mounts and storage" and "mount USB storage", I the drive does not appear on both Mac and PC. I'd like to transfer the stock NS4G image onto the phone so I can install the zip from the sdcard...
When I try to use the command, "adb push", it can't find the SD card.
Same problem
I flashed it , and since then i cannot mount the device , i have a good image to push but the device is not opening up the storage for me to push the image.
I had the same problem. Got it all fixed up.
peabody42 said:
Welp, tried to root the Nexus S 4g.
On rebooting, it gets stuck at the Nexus S bootscreen, pauses, keeps going, etc.
Got CWM 3.0.0.5, and can fastboot, get into CWMRecovery.
From there, I'm at a loss. Tried to restore Nandroid backup, but it says a whole bunch of stuff, basically saying E: failed to find "cache" partition, Can't mount /cache/recovery/last_log, etc.
Tried to apply zip from CWM backup, it says "No files found."
Tried going into mounts/storage to mount USB storage, but nothing appears on desktop of either Mac or PC, so I can't get move files onto the SD card.
Now, when I just power up, it just says "Google," and there's a unlock icon at the bottom. Nothing else.
Anyone have any solutions?
Click to expand...
Click to collapse
I had the same problem this morning:
I posted a workaround that worked well for me in Post #35
http://forum.xda-developers.com/showthread.php?t=1072698&page=4
If it works for you click 'Thanks'
Figured it out
Alright , this is what i did to fix the problem, i booted up the system with the bad image i had, connected to wifi and downloaded the Nexus S 4G deoxed image that is out there directly from the internet to the phone. Then i moved it from the download folder to the root using file manager.
I rebooted into recovery and was able to wipe and then flash the recovery image and reboot. Once i rebooted i regained control over the usb and memory card. hope it helps you guys.
How Do I Fix "REALLY" Bricked and DEAD Nexus S4g?
All posts on this thread presuppose a working Nexus S 4g. When I use the term bricked, I mean dead. About a month ago I followed directions on one of these threads on how to easily and with one click route my jellybean running phone. For some reason the process never completed, and all I was able to accomplish was unlocking the phone. When I ran the check to see if it was truly rooted, the response showed the phone was still unrooted. About 30 days later it was deader than a brick. Somewhere I read that Jellybean on Sprint might be the culprit. Anyway, I have a dead phone. Sprint wouldn't even check it because the screen was cracked. Fortunately, I bought a new one, new to me anyway, on eBay for $37. It is still running android 2.3.7(Gingerbread), and the phone is attempting to push the Ice Cream Sandwich update. I am fighting the update until I figure out what killed my phone.
Just wondering whether there is anything I can do with my old phone, even if I only use it like an old iTouch for music and surfing via Wi-Fi. Anyone?
I attempted the one click method described here, but my desktop cannot find any devices. So it truly is dead. Comments appreciated. I have used several different cables, unsuccessfully.
sexynexy said:
All posts on this thread presuppose a working Nexus S 4g. When I use the term bricked, I mean dead. About a month ago I followed directions on one of these threads on how to easily and with one click route my jellybean running phone. For some reason the process never completed, and all I was able to accomplish was unlocking the phone. When I ran the check to see if it was truly rooted, the response showed the phone was still unrooted. About 30 days later it was deader than a brick. Somewhere I read that Jellybean on Sprint might be the culprit. Anyway, I have a dead phone. Sprint wouldn't even check it because the screen was cracked. Fortunately, I bought a new one, new to me anyway, on eBay for $37. It is still running android 2.3.7(Gingerbread), and the phone is attempting to push the Ice Cream Sandwich update. I am fighting the update until I figure out what killed my phone.
Just wondering whether there is anything I can do with my old phone, even if I only use it like an old iTouch for music and surfing via Wi-Fi. Anyone?
I attempted the one click method described here, but my desktop cannot find any devices. So it truly is dead. Comments appreciated. I have used several different cables, unsuccessfully.
Click to expand...
Click to collapse
Hi,
What method did u use to root? What thread? Cuz it may need to newest version of the recovery.
anyways...
Try charging up a battery on newer phone and put in dead phone... but instead if turning on normally, boot into recovery.
If it worked then use a back up to flash it back to stock. Assuming u were able to back it up b4 root.
If not plug into computer. See if it turns on or can go into either recovery or boat loader mode and if so perhaps computer will recognize it.
Vs Nexus S4G using tapatalk2

Cant use odin and mount sd

So.... for some reason i cant mount my sd card so that i can get to my files in my phone... tried screwing around with settings and usb debugging and doesnt work at all.... went to recovery and set the thing to mount too and didnt work.... Now for some reason i cant use odin the yellow thing wont pop up in odin even though its on download on my phone. Also i cant restore my phone to a earlier version. It will work fine while going though the files and then it will get stuck on android_secure and it just freezes... waited for like near 20 min and still nothing. The phone still works fine though. Plz help me..... i want to try out [email protected]#
Sounds like you're on CWM3. Thats a known bug that it hangs on restore. As for the rest, sounds like user error.
Did you try either reloading or re downloading the driver? If the computer isn't picking it up its a driver issue, as for your mount problem that could be did you switch to gingerbread friendly cwm? If so, it will only flash zips if I remember right, if not try a different cwm.
Sent from my SCH-I500 using XDA App
First make sure your USB debugging option is enabled and that your set to mass storage. If those don't fix then reflash the ROM using the correct steps.
I had the same issue with Heinz 57 05/07 release (I think). I would have to reboot repeatedly to get it recognized but the reflash back to 2.2 then Heinz has worked like a charm!

Huge problem,SD card wont mount

I just got a sidekick 4g off craigslist and whenever I put my SD card in the phone it will recognize its there but wont mount. Im not sure whats wrong,I tried formatting it(In Fat32,NTFS and FAT) but it didnt work. I tried using Astro and that was a fail as well. I even tried doing a hard boot. When I go inside the SD card setting it doesnt show the total space or avalible space and formatting it does nothing. When I click on mount,it attempts to mount but after awhile it just times out and gives me the error "activity sd card and phone storage (in process settings) is not responding" and I have the option to wait and force close. clicking wait doesnt change anything. Also my laptop reads the card perfectly,its just the phone that seems to reject my SD cards. BTW I tried 2 cards using the methods mentioned and the phone just refuses to mount the card. Any help would be greatly appreciated!
It fails to mount either of the cards you've tried? That's a concern. Did you do a factory reset of the phone after you bought it?
yea I did,im so confused.
I would try rooting the phone and either odin it or flash a new rom and see if that works either that or maybe that's why the kid was selling it on craigslist
Sent from my SGH-T839 using XDA App
Is there a way to do that without a SD card because it seems like a SD card is a requirement to flash anything.
You can both root and odin without an SD card.
Alright,i rooted and unrooted my phone multiple times. Its currently rooted so im going to try ODIN now.
Once you Odin , try to see if the /SDCARD mount's if it dosen't it could be a /SDCARD faulty .
STravers said:
Alright,i rooted and unrooted my phone multiple times. Its currently rooted so im going to try ODIN now.
Click to expand...
Click to collapse
I used odin and i think i bricked my phone . It said in the first box of the application failed in red and on my phone it was a status line in blue that seemed to be not moving. So what i did was rebooted the phone and it hangs on the samsung splash screen. It is able to go back into downloading mode but theres nothing i can do because it always fails to complete the process.
STravers said:
I used odin and i think i bricked my phone . It said in the first box of the application failed in red and on my phone it was a status line in blue that seemed to be not moving. So what i did was rebooted the phone and it hangs on the samsung splash screen. It is able to go back into downloading mode but theres nothing i can do because it always fails to complete the process.
Click to expand...
Click to collapse
what boxes do you check?
I got odin to work but the memory cards still fail to mount.
Do you have another phone/sdcard slot in your computer that you could use to try mounting them? they could just be dead SDcards.
EDIT: read the OP, jk about another computer.
If known good cards won't mount in your phone, it's most likely a hardware defect. Send it back home to Samsung

Soft brick? Stuck in a bootloop, Help!

I haven't found this issue so here is my story...
For some reason my lock PW keyboard changed to numeric on me today and for the life of me I couldn't get it to go back so after an hour of rebooting, flash back-ups in CWMR and removing the batery, nothing would get me back to a regular keyboard. I got flustered and just punched in stuff seeing that warning that if I fail again it will erase all data. I thought that will be a pain but I can restore everything in an hour or so because I back everything up, right? WRONG. All data was ALL F$%^&ng data! external SD, cleaned off too.
BUT hold on, I have it also backed up on my PC because I'm smart still right? No dice...get error E:Can't open /sdcard (bad)
So this is what I have to work with...
I can get into CWMR Touch v5.5.0.4 ( I can see what is on my external SD card but cant run anything)
I can get into DOWNLOAD mode BUT Oden wont recognize...it reads device connected for about 2 seconds and then device disconnected)
If im CWMR mode Oden will see my device...not sure if that is good or bad
if I just power on the phone it just goes to the samsung logo and starts booting but never quite gets there....( I left it spinning for 20 min and nothing...)
Any thoughts?
I feel if I could get ODEN to see my phone I would be in good shape.
Also I have another phone and SII and all is read fine so I know it isn't my cord, USB, PC, ODEN...
Thanks in advance
Oh...I think my phone isn't in debugging mode...and that could be it but how could I get in to check if I cant boot the phone?
First you have to make sure your phone drivers are installed correctly, so either download and install kies if you don't have it. Or if you have it got to connection troubleshoot, make sure your phone is not plugged, let it run and when its done put your phone into download mode and connect it. Let the computer install the drivers, don't unplug the phone until it's done or it may screw up. When its done close kies completely and run odin.
Did you try simply flashing a rom from CWM?
And I'm pretty sure you could get a restoration program and recover the data from your external SD card, usually deleting only means its being marked as free space but all the previous data should still be there until something new is written.
When you in download mode are you pressing the up volume to confirm you want download mode?
You can go into download mode but still need to hit up or down to confirm.
As for CWM not reading your external SD did you check to make sure that it's mounted?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
specter07 said:
When you in download mode are you pressing the up volume to confirm you want download mode?
You can go into download mode but still need to hit up or down to confirm.
As for CWM not reading your external SD did you check to make sure that it's mounted?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
CWM "read"s my SD card, ( I can see the rom and backup on it) but once I try to flash, that's when I get the error saying the the path is not valid :/
For DL mode, yes, I hit up and the little droid shows up saying Downloading. In the Upper left corner it reads
ODIN MODE
Product Name :SGH-I727
Custom Binary Download: NO
Current Binary: Samsung Official
kishke said:
First you have to make sure your phone drivers are installed correctly, so either download and install kies if you don't have it. Or if you have it got to connection troubleshoot, make sure your phone is not plugged, let it run and when its done put your phone into download mode and connect it. Let the computer install the drivers, don't unplug the phone until it's done or it may screw up. When its done close kies completely and run odin.
Did you try simply flashing a rom from CWM?
And I'm pretty sure you could get a restoration program and recover the data from your external SD card, usually deleting only means its being marked as free space but all the previous data should still be there until something new is written.
Click to expand...
Click to collapse
The only way I can get the phone to be read by my PC is in CWMR..Keis will not recognize it but I did reinstall the drivers.
Should I remount in CWMR? Would it still read what was on the card if it wasn't mounted correctly?
I got ODIN to read my device and was able to flash Stock ICS 4.0.4 on it!
Thanks for your feedback!
:good::good::good::good::good::good:
So it was driver issue after all.
Yup...not sure what the deal was with the driver though in the fist place. It wasn't like I reloaded it this morning. :/
Sent from my SGH-I777 using xda app-developers app

Categories

Resources