Database Info

Home WiFi connection problems

Hey world,
I'm having trouble with my Roger's branded Samsung Captivate SGH i-896's wifi. The phone is completely stock. When I connect to my wireless AP at home it doesn't seem to always work on the captivate... I had a htc magic before running all sorts of different roms and never had a problem like this before.
What happens is that I would connect to wifi at home and it would work, but if I leave wifi on the phone for an extended period of time and go back to the phone, wifi stops working.
It would show that i've successfully connected to my AP but no data would pass through my phone.
Disconnecting and reconnecting to the AP doesn't seem to work, the only way to fix it is to restart the phone. I'm not experiencing this problem with any of my laptops, netbooks or cellphones at home.
Security type is WPA2.
Is anyone else experiencing this problem? Anyone have an idea what could be causing this problem?

I have had this problem intermittently, So has my wife on her Captivate. No idea what causes it though. It's a pain because if WiFi is on, but not working, 3G doesn't kick in so apps just don't work.

my wife's captivate has this issue as well (but I don't on my captivate). It will work for a short period and then stop. We have a fios wifi router, not sure if that matters at all.
restarting the router and/or phone usually fixes the problem

mine is a linksys... hrnnn

I'm having the same problem on my new Captivate. Tried it on several different networks with the same results (shows connected but no data will transmit) before I took it back to ATT. They scratched their collective heads and rebooted (powered down and removed battery), which is a temporary fix, but its been working for two days now and I turn off WiFi unless I know I'm in range of a working hot spot.

I was having this same problem until I set my wifi policy to never sleep, dont know if it is a fix for everyone but it definitely fixed my problem.
Sent from my SAMSUNG-SGH-I897 using XDA App

Glad to hear I'm not alone!
I've been fighting with this issue for over a week now, it suddenly started occurring. I wonder if it was an app we all loaded that suddenly made this condition occur? If you look the phone is requesting an IP and if the IP given back by the router is the same one it already has the phone doesn't acknowledge that command. If the router is rebooted then a new IP is given, or what is considers new. This is a HUGE problem and I've put in some time looking at it, but one of the problems is that is comes and goes. What your router log and you'll the phone request an IP over and over again, all the while the router saying "here, take the same one you already have back".
If you use the app "Network Info II" you'll see the problem when it displays a "Device IP" at the top of 192.168.1.254 and WiFi IP address will be the correct one, in my case 192.168.1.108. When we have these two IP numbers showing differently the device is hosed. Rebooting will put them back in sync, but that is not the proper solution, we need to get to the bottom of this! I understand the WiFi IP address showing at the bottom but the "Device IP" I do not, why the difference? How can we affect the "Device IP", where does the device get that IP address?

Try the app called WiFi Fixer. That did the trick for me. There seems to be a bug of some sort that causes the phone to not release the IP address. Or you could use static IP but that worked only for a while.
Cheers.
Sent from my SAMSUNG-SGH-I897 using XDA App

the app doesn't seem to work for me.... =(

DKirk said:
How can we affect the "Device IP", where does the device get that IP address?
Click to expand...
Click to collapse
The phone gets the device IP from either the service provider (when using edge/3g), or from the router (when using wifi). If an IP address is not provided, it uses a default IP address, which is always outside of the standard private IP block.
There are two ways to assign an IP address: dynamically and via static IP address. Dynamic = assigned by the router, static = pre-programmed by you. I don't know if you can set a static IP address on a phone, as I've never tried it.

I had a zyxel wireless n router in my house and could never get the wifi to work on my captivate. If it did work it lasted 5 seconds... I was really pissed.
I was thrilled to see that buffalo is now back in the market and with dd-wrt firmwares... So I picked up the most expensive one they had for $89.99.
it has a dlna client built in as well as bit torrent, also lets you use a spare usb hard drive as a nas... things i don't know....
However loaded up the wireless settings in 2 minutes and voila... perfectly working on my captivate... I have also found that this router works flawlessly with G+N devices and it is gigabit. I was able to stream 1080p video from my synology 411+ to my ps3, download on the captivate and be on two other laptops at the same time without any issues... I am very very impressed with the buffalo.
Here is the product info.
buffalo nfiniti wireless n high power router and access point. WZR-HP-G300NH
ohh and my laptops are connected fully at 300 mbps with this router wirelessly...
very very happy with it.... Oh and forgot to mention... once this started working with the buffalo i noticed my batter was much better running on wifi all the time. Also wifi file explorer pro works flawlessly.. I was able to upload a 700 meg movie to my captivate wirelessly in about 2 minutes.

WiFi fixer did not fix my problem as well. After turning WiFi on the device IP remains 192.168.1.254 while the WiFi IP is correctly set at 192.168.1.108. When these two IPs are different WiFi does not work and WiFi Fixer doesn't appear to see any problems here.
The router here is an Asus RT-N16 running Tomato and I'm fairly confident that isn't the problem. This is more like an internal routing issue inside the phone.

I don't think it's brand of router that matters... maybe a setting on our routers can fix this...?

I've searched the internet to find a sol'n but it looks like this wifi problem is a widespread problem for almost all galaxy S devices... ppl have made temporary workarounds (ie. setting a static ip) but ultimately, there is no fix for this problem.... gg...

bigbrotherbear said:
I've searched the internet to find a sol'n but it looks like this wifi problem is a widespread problem for almost all galaxy S devices
Click to expand...
Click to collapse
It appears to go beyond Samsung Galaxy, I've seen the same issue with Nexus and Motorola Droids. VERY frustrating!

tylerdurdin said:
I was having this same problem until I set my wifi policy to never sleep, dont know if it is a fix for everyone but it definitely fixed my problem.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I dont know why nobody even notice that answer !!!!
had same problem on my milestone .. it is not a bug , wifi goes to sleep , its the way your phone is set up ... as its quoted here set it to never sleep and make sure your not using soem kind of app that will overwrite that setting ( like battery manager that for example could turn off wifi to save battery)
very easy to double check once your wifi is not working , go in wifi settings scan and check the wifi access points you normally use you ll see its set to disabled ..
the bug is it doesnt resume like it should. or gets re-enabled however you wanna call it . just re-enable it voila ! no reboot needed .

I got it working!!
This may be my first post here, so be kind...
Running Cognition v2.3b3 and Linksys WRT54G router. WIFI was working fine until I flashed to Cog 2.2 Then I could only use WIFI tethering, no other WIFI connection would work.
I tried setting up static IP and setting sleep to never. Didn't work. Changed router security from WEP to WPA Personal and got it working.
Phone settings: Go to Wi-Fi Settings, click menu, and goto advanced. I don't know if all the settings here are necessary, but I'll post what I have.
Port = 80
Use statis IP = checked
IP address = 192.168.1.103 (check your router assignments for an open address)
Gateway = 192.168.1.1
Netmask = 255.255.255.0
DNS 1 = (check your router config. For my router it's located under the Status, then router tabs.)
Router settings: (Under the Wireless, Wireless Security tab)
Security Mode = WPA Personal
WPA Algorithms = TKIP
WPA Shared Key = (your access key used when you attempt to athenticate from your phone)
Group Key Renewal = 3600 seconds
Write the access key down so you can use it to reconfigure the other wireless devices on your home network.
Good luck,
Glen

changing my router fixed the issue.
I have wifi running on my captivate for 8 hours at a time at work now and at home. Not one hiccup or disconnect, works 100%.
99% of wireless routers are crap. I work in IT and have dealt with most major brands and had been running linksys wireless routers with dd-wrt on them...
if you got a spare 90 bucks.. go to your microcenter or place where they sell buffalo routers and pick one up. If it doesn't work.. you can return it.

This worked for me

Going to a static IP worked for a few hours and then it stopped working as before. WiFi is set to not sleep.
When I ran the router without security I did not have this problem and since adding WPA2 w/AES+TKIP the problem has developed. The iPod Touch doesn't have a problem with it, nor my laptop or wireless ipTV set-top box, only the Android. I'm leaning towards setting up another router without security, on a different channel, and see if the problem disappears again. Here in 2010 we shouldn't be having this issue, but look on other forums and you'll find similar complaints with other brands of Android phones, it's not a Samsung thing.

[Q] Wifi signal high but no internet connection (Samsung Galaxy i5500)

I just upgraded my router to a wireless one. Firstly, it's connected via ethernet to a PC and it is happily getting internet access.
On my i5500 I get a strong wifi signal. Wifi Analyser shows the signal at max constantly. I can also connect with Gmote and it works just fine.
The problem is that I can't actually access the net at all from the phone.
So basically I know that my phone is talking to the router with no problem. It's just getting out onto the internet.
Does anyone know of a solution?

try logging into your router and change the broadcast channel to something else and test it again. it should be something like a/b/g mode... define a single channel and see if it works.

I had originally thought that was working. It did for the first few minute where I had connection but then it just dropped.
I have noticed that I have some very small bursts where I can connect.
Do you think that trying the different channels may be the solution?

I have the same problem. Have you found a solution?

Still no solution. I went through every channel and every encryption method.
So far I've found that having the channel set on 'Auto' and then disabling encryption seems to give me internet connection through WIFI for at least the initial period but it eventually drops. But that's also not always.
I've also Googled it to death and found nothing. If you do find the solution please post it here and I'll do the same.
Maybe we can help each other.

make sure you entered the right password of wlan.
use a pc to connect the router and in the wlan you'll find the password.

Ok, just to clarify. My phone connects to the Router via WLAN. In fact I can use Gmote to control my PC. So the WLAN connection is great.
The problem is accessing the internet when using that connection.

I had similar problems with a router last year. I resolved the issues by flashing DD-WRT firmware. The manufacturer's firmware was junk.
Sent from my ADR6300 using XDA App

I had that idea but they don't have firmware for my router yet. I have asked them if they intend to make one.

Any chance the firewall on your phone is blocking your browser from using the Wifi?
Sent from my DInc via XDA App

I have no firewall on my phone.

Ok I've tried some new stuff and they I've had the longest connectivity so far (which is about half an hour).
First I made sure my Wifi wasn't set to turn off when the screen goes to sleep. Second, according to a forum I read, Netgear recommends channel 7. If that channels doesn't work try 1,3,6,9,11,13.
I then disabled encryption.
Fortunately no one near me uses Wifi at all and I've got the kind of walls that stop the signal from getting outside.
Anyway. It's working so far but I'll monitor and report.
[edit] And I forgot. The router was checking for firmware but it wasn't actually finding so I downloaded it myself. Seems that also made a difference.

Ok. I can confirm after 2 and a half hours my internet connection is stable. I even left half way through and when I came back it connected perfectly.
So as a summary here's what I did:
1) Get latest firmware
2) Change channel to 7
3) Disable encryption
I will change encryption and see if it still works

[Q] NS WiFi Problem - Obtaining IP Address

First of all may I say I have searched for this problem on google, as well as xda forum. I did find several threads about this problem, but none of the solutions presented appear to be my case.
So, basically the problem is: I cannot connect to my home router, a Linksys WRT300N N-router. I could not connect with a N1, HTC Desire, nor with my actual NS. My previous Galaxy S was connecting fine though. I'm talking here about stock ROM, no rooting, no custom kernel etc. Also, using static IP address works like a charm, but then WiFi cannot be used on other outside routers, since Static Ip setting is not setup PER router, but rather per WiFi connection, meaning the phone will try to use the static IP defined for any WiFi I run into.
From My experience, it seems it could be related to wireless N router as opposed to b/g. This happened since I replaced my router with the actual one. Ever since this happened, my phone would not connect to my router. Also, this problem seems to be presentfor any N-router, since I cannot connect to WiFi in other locations as well (which might have N-routers as well).
Assuming that it is a problem with N-routers, I don't understand why the Galaxy S would connect, but NS not, since they are almost the same hw.
Does anyone have a clue on this? But please skip solutions like reset router, reset phone, reset modem, use different ROM etc. I am talking stock ROM for all the examples above.
Thanks.

I use my NS with three 802.11N routers without issue (D-Link, Belkin and Netgear).
Have you checked if MAC filtering on the router is active? What security mode are you using? Who makes yr router and does it have latest fw?
Sent from my Nexus S using XDA App

Just seen you use Linksys, I have a wag160n and I find it unsusable on terms of wifi, dreadful hardware, despite the parent company being Cisco
Check Linksys forums for problems.
Try another router for whether it's that or phone at fault.
Sent from my Nexus S using XDA App

MikhailCompo said:
I use my NS with three 802.11N routers without issue (D-Link, Belkin and Netgear).
Have you checked if MAC filtering on the router is active? What security mode are you using? Who makes yr router and does it have latest fw?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
MAC filtering is disabled, I've checked it. Security is, on the router, PSK-Personal with TKIP encryption. Key renewal: 7200 sec. Not sure if this can influence anything.
I've checked on linksys page for fw upgrade, they only have pdf manuals.

ionutz6 said:
First of all may I say I have searched for this problem on google, as well as xda forum. I did find several threads about this problem, but none of the solutions presented appear to be my case.
So, basically the problem is: I cannot connect to my home router, a Linksys WRT300N N-router. I could not connect with a N1, HTC Desire, nor with my actual NS. My previous Galaxy S was connecting fine though. I'm talking here about stock ROM, no rooting, no custom kernel etc. Also, using static IP address works like a charm, but then WiFi cannot be used on other outside routers, since Static Ip setting is not setup PER router, but rather per WiFi connection, meaning the phone will try to use the static IP defined for any WiFi I run into.
From My experience, it seems it could be related to wireless N router as opposed to b/g. This happened since I replaced my router with the actual one. Ever since this happened, my phone would not connect to my router. Also, this problem seems to be presentfor any N-router, since I cannot connect to WiFi in other locations as well (which might have N-routers as well).
Assuming that it is a problem with N-routers, I don't understand why the Galaxy S would connect, but NS not, since they are almost the same hw.
Does anyone have a clue on this? But please skip solutions like reset router, reset phone, reset modem, use different ROM etc. I am talking stock ROM for all the examples above.
Thanks.
Click to expand...
Click to collapse
Have you checked that you set up the router with b/g/n protocols? not only N..
Try to change the password encrypting method, to WPA or WPA2 or WEP, try also to change the default password.
Have you tried to disable the firewall (DMZ)?

I have exactly the same issue on my stock Desire.....
I have recently upgraded my router from a Belkin G+ to a Belkin N+ and using the b/g/n setting the desire WILL see the connection but will NOT connect to it, NO MATTER WHAT settings you try. Changing it to b/g and it will connect without any issues.
It is my understanding that the Desire/Nexus et al doesnt have the access to the N ability enabled (it has the correct chipset but for some reason it is not active).
Maybe when broadcasting the tri-band the chipset only sees the stronger N connection, therefore tries to connect but gets conflicted (due to lack of N firmware) and instead of switching to b/g it just loops to the stronger signal. IF that makes any sense

Riki1kenobi said:
I have exactly the same issue on my stock Desire.....
I have recently upgraded my router from a Belkin G+ to a Belkin N+ and using the b/g/n setting the desire WILL see the connection but will NOT connect to it, NO MATTER WHAT settings you try. Changing it to b/g and it will connect without any issues.
It is my understanding that the Desire/Nexus et al doesnt have the access to the N ability enabled (it has the correct chipset but for some reason it is not active).
Maybe when broadcasting the tri-band the chipset only sees the stronger N connection, therefore tries to connect but gets conflicted (due to lack of N firmware) and instead of switching to b/g it just loops to the stronger signal. IF that makes any sense
Click to expand...
Click to collapse
Well, the funny part is that I don't even know how to disable the N range to my Linksys 300N.
Anyway, it is weird that the Samsung Galaxy S had no issues with this, while Nexus S (still Samsung made, brother-in-law to SGS) has this issue. For HTC, all have had this problem, including Desire, Desire HD, Wildfire.
Still no explanation or resolution to this matter.

I may have fixed this issue (well I have for me anyway, so yay).
After posting this I decided to apply some weird logic to it. So I reset the router back to b/g, to do this you need to log into the router IP settings, for Belkin it is 192.168.2.1. On linksys routers I think it is 192.168.1.1 but check to be sure.
Once you are logged in there you can change the broadcast settings from N, b/g/n or b/g etc.
Okay, so here is what I did. I reset the router to broadcast b/g only, my Desire would connect. So I decided to try resetting the router to broadcast b/g/n (because I use N on other devices) and then switched the wifi on the desire off and back on again. Low and behold it connects.......Tried it loads of times now and connects everytime!
Might be worth a try?

You guys should just check the logs on the router and see what they say. Should give you a much better idea of what the issue is. You can then Google the error line.

Mine is fixed now, been connecting to various N routers with NO probs since I did the workaround.
My guess would be a protocol conflict (wireless handshake if you prefer) when N routers are broadcasting (based on the fact that the Desire/Nexus etc dont have N protocol enabled in the chipset firmware).
To get around the conflict connect to an N router using the b/g only setting in the routers IP settings and then check you can connect okay and switch the b/g/n back on in the router. I've done this twice today (different N routers, a Linksys and a D-Link) and it works on both where it wouldnt before, so it wasnt just my router.

hum... i am having the exact same problem as described only my router is already using
802.11g&802.11b
i have no idea why it keeps trying to obtain ip address
then it scans agains because it can't connect and tries to obtain the ip again
after trying for a minute or 2, the home ssid becomes:
"disabled, secured with..."
(device = motorola atrix)

I have tried everything and still not working... do routers block Mac addresses if it doesn't connect right away?
Sent from my MB860 using XDA App

Did you reboot your router? Mine does that sometimes but a reboot always fixes it.
Sent from my Nexus S using XDA App

Hum. Tried restarting the router... no go
Sent from my MB860 using XDA App

(Solved) please Help WiFi

ok i did a search for WiFi problems everyone else's problem seems slightly different then mine
or not the same in the least
here is my problem
First i have NO data Plan so i turn 3g/4g off
then i Turn on WiFi and it works till i turn it off or reboot the phone
THEN even though it still connects to WiFi and my router says it's connected
i get no data throughput
no amount of resetting, deleting my router profile, rebooting phone, rebooting router, and messing with everything i can find INCLUDING setting my router to OPEN, changing the channel, changing from N to G or B from 40 mhz to 20
NOTHING works
EXCEPT
resetting phone to factory default
then it works again TILL i turn WiFi off or reboot/restart phone
any ideas ?
.

ok you can ignore this it has something to do with turning off the network 2g/3g/4g
I'm not sure what the setting is causing the problem, as I'm still looking into it
I'll post here when i find the setting that is causing the problem
in case it will help someone else
UPDATE:
ok under "Mobile network settings"
you can not turn off "Data enabled" (Enable data access over Mobile network)
why this affects WiFi i do not know as it should ONLY affect 2g/2g/4g
Because it says "Over Mobile network"
but it turns off WiFi data also
If i find anything else that effects WiFi I'll post it here
but for now this is the solution to my problem
PS: it's nice to be able to solve your own problem
PSS: don't call T-Mobile for help they will say you need flex pay or better plan to use WiFi, i hung up on the stupid bass-turd,
not to add to the fact it's super hard to understand their mangled English!
.

i got that problem last night, during my open box and testing the phone, all you have to do is reset the phone, then you are set to go; hope it works for you.

thanks for the reply
i found out what i was doing wrong
and edited my post
so others can not do what i did
thanks for the reply though

Maybe they did this on purpose to keep you from using the device with out a data plan. Who knows.

Has anybody tried to connect to a Time Capsule?? I cannot get my G2X to see my router for nothing. Is the G2X compatible with a N router??

s00paSold3r said:
Has anybody tried to connect to a Time Capsule?? I cannot get my G2X to see my router for nothing. Is the G2X compatible with a N router??
Click to expand...
Click to collapse
maybe you should open your own thread about this ?
i do not use "Time Capsule" and not sure what it is (A router?)
to answer your last question the G2X supports Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot. so yes it supports the "N" standard
BUT
might not be compatible with ALL b/g/"N" routers
should be compatible with them all BUT might not be ...........
i am not an expert on routers, so cant say for sure
also could be that your router is to far away from your phone
your phones antenna is tiny, so has to be closer to the router then say a laptop or computer.
you might also want to consider going to a friends house and trying their wireless router.
anyway opening your own thread on this is your best bet
.

I have an airport extreme broadcasting mixed n/b/g and mine is really struggling. At first I thought it was the browser, but now it's doing it in both dolphin and the stock browser. It stalls a lot, connection seems to stop and restart. I already disabled wifi sleeping on the device. Pretty frustrating. Oh and mine is setup as hidden with no security on it at this time so that isn't the issue.

a1yet said:
maybe you should open your own thread about this ?
i do not use "Time Capsule" and not sure what it is (A router?)
to answer your last question the G2X supports Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot. so yes it supports the "N" standard
BUT
might not be compatible with ALL b/g/"N" routers
should be compatible with them all BUT might not be ...........
i am not an expert on routers, so cant say for sure
also could be that your router is to far away from your phone
your phones antenna is tiny, so has to be closer to the router then say a laptop or computer.
you might also want to consider going to a friends house and trying their wireless router.
anyway opening your own thread on this is your best bet
.
Click to expand...
Click to collapse
I did start my own thread.... and the wireless works everywhere else I connect to, The Time Capsule works because my laptops and everything wireless is working ok.

[Q] Wi-Fi not working. Am I the only one?

Okay, a little about my setup. I have tested on Slim ICS 2.7, 2.9; Codename Android 1.4, 1.5.5; as well as AOKP (I dont know exact builds, but am on the latest now - build 28). I have a Cradlepoint MBR 1000 which is a b/g/n 4g router (though I only have cable hooked up - was bought originally to allow me to broadcast my Clear 4g service, but Clear doesnt work where I live now).
EVO 3D, iPhone 4s, All my laptops, HeroC, Kyocera Echo, Roku...I mean everything connects to my Wi-Fi EXCEPT my NS4G...WTH?
Does anyone else have this issue?...could it be some settings with the N router?...I cant believe everything but this phone works.
Please help. It is so frustrating to be limited to 3g that works intermittently while I am at home. I have all my apps from the Google Play backed up to my sdcard so I dont have to connect to install them...it is a huge pain. Thanks in advance

Need some more description. What settings do you have on the router, how have you tried to connect, does it connect then drop out, can you see the network at all, etc?

Either your phones wifi hardware is gone or your house.
So here's what you can do to narrow down on the problem.
Tell me if you can connect to any other wifi hotspots outside your house. If it does connect then problem is router if it doesn't than problem is with the phone.
Good luck.
Sent from my Nexus S using Tapatalk

Does it detect any Wi-Fi networks at all?
Does it detect any Wi-Fi networks at all? or just can't make the connection

I have the same problem but only at home .I don't anderstand a lot about this, I change my rom with ice scream sandswich 4.0.4 it was working with 4.0.3. Where is the problem. Thanks for your help.
Sent from my GT-I9000 using xda premium

shockem said:
Either your phones wifi hardware is gone or your house.
So here's what you can do to narrow down on the problem.
Tell me if you can connect to any other wifi hotspots outside your house. If it does connect then problem is router if it doesn't than problem is with the phone.
Good luck.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Not necessarily. Setup of each router can change in numerous ways so as to stop certain devices from working, as can certain phone settings not allow connecting to certain routers. It is not quite so black and white, and we already know the router works.
daviki said:
I have the same problem but only at home .I don't anderstand a lot about this, I change my rom with ice scream sandswich 4.0.4 it was working with 4.0.3. Where is the problem. Thanks for your help.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Sounds like a channel setting problem. Easiest way is to open up your router config and change the channel between 1 and 12 and this shouldn't happen again. Alternatively you could mess around with your build.prop.

Harbb is right, you might want to test several things within your router:
Change channels (use 1, 6 or 11-12)
Set it to only use on b/g connections (don't use n)
Different authentication methods (WPA2 with AES, etc)
And make sure you don't have a limit on your DHCP settings (just to make sure you don't have a ton of devices connected so it's not handing more IPs) or MAC filter.

Okay, sorry for not replying sooner. I posted this, then went to bed.
@Harbb:
It does see the network, lets me connect, put in the password, and says it is connected. It always says the connection is poor when I know it should be a good connection. The phone then shows the wifi icon and up and down arrows inside of the icon...I never see a portion of blue. When I try to download from the market, it will act like it is working, then the icon will disappear/reappear numerous times before it tell me there is not a connection.
As for my router setup. I do not know what information will help in this but here is some info: I do not have MAC filtering on, WISH is active (dont use it), WPA2 Only Personal AES (this is what I use), Channel 6 (I have tried channel 11 because I read somewhere the Wii needed 1 or 11 or one of my devices needed it), Transmission rate is Best, Channel is Auto 20/40 MHz, Mixed b/g/n (to utilize N and G, it has to be on this setting, there isn't an option for Mixed n/g), it is set on 192.168.0.x, NetBIOS mode type is Mixed (Broadcast then Point to Point).
@shockem I have not tested it with any other hotspot to see if it is just a problem with that router and this phone. I will try if I can find an open hotspot and let you know.
@Billchen0014 It does detect the network and connects, but drops it constantly...I cant even download a <1MB file from the market.
@Harbb (2) Going by your advice to daviki...it looks like I need to check another router. I go by a Starbucks, so I will try their hotspot...unless it isn't free, then Ill look around.
Thanks everyone who is helping me with this.
@Oogway, I will try G only and see what happens...if I use Mixed it has to be g/b or b/g/n. As for DHCP there is only 2 maybe 3 devices connected and No MAC filtering

Could it be the Wifi country code issue?

Is that something on the phone? Also, I tested different channels (1, 6, 11) as well as b/g and g only. Still no go.
Sent from my Nexus S 4G using XDA

Thanks for the info. Test another hotspot (preferably one with a wpa2 password too if possible) and let us know. I'll reply later with some things to try as I gotta get going.

Okay, I did test one more thing. I sat right next to the router and it had full bars. Stayed full and my speed tests were great. Moved to where I sit on the couch about 30 walking steps away and no connection. I know the signal reaches because it is where I use laptops and other devices. The PS3 and Wii are further away and have no issue. It is not a clear path, but there aren't any doors between the router and the couch.
Just some more info...leading me to believe it is an issue with the phone. I get horrible service with Sprint also, so it may be connected. I don't know.
Any ideas? Is it just because of how far away I am?
Again, thanks everyone for the help. It has been so frustrating ever since I got the phone.
Sent from my Nexus S 4G using XDA

Wifi Analyzer can give you a dB reading on the signal strength if you'd like to try that from a distance too. Wifi at uni likes to show low bars quite often, however alot of the time i have great signal and it shows through wifi analyzer. May not be related since uni is a peap connection, but worth a shot anywho. Might give another hint on whether you should seek out warranty or router settings.