I just rooted my evo 4g last week but I have not done anything to it yet. I have installed a few apps like Rom Manager, wifi tether, and a few others.
I wanted to do some reading before I tried to do anything else to minimize the chances of breaking my new toy
I have been told to flash amonRA, that it is better than clockwork and it will give me the nand backup that clockwork doesn't.
I have also been told that you can just simply do this through rom manager, at the bottom, by flashing alternate recovery.
Do I need to know anything else before doing this?
does this get rid of clockwork or just ad another recovery to chose from?
After I flash a recovery image, and before I try flashing a new rom, probably mikfroyo 4.4 based on what I have read, is there anything that you would suggest?
Related
Ok, so my phone is a rooted Droid 2, and all my root required apps seem to be working fine. Well, I wanted to try some new roms, and most definitely backup my phone. So I start Rom manager, flash clockwork recovery, it tells me that was successful, then I try to backup current ROM, and it restarts my phone, and it loads up like nothing has changed. I go to Manage and restore current backups, and there is nothing there. If it makes a difference, the little loading swirl at the bottom is basically always there.
I'm quite confused, I thought this was a straight forward application, but it just seems not to be doing anything. Any help is appreciated.
I'm afraid I won't be much help but the exact same thing happened with my rooted Captivate. According to what I've read on CyanogenMod.com, when you flash Clockwork, it's supposed to put you in recovery. Mine didn't do that, but in ROM Manager, it lists Clockwork as my current recovery. I also tried to backup my current ROM and it did go into recovery and then rebooted and I had the same result as you. I read that you can't flash Clockwork on Froyo and if that's true, it's going to be a pain in the butt to flash back to Eclair, flash Clockwork, reflash Froyo, then try to install Cyanogen. I'm hoping someone will tell me there's either a Clockwork for Froyo or an easier way to do this.
I had same problems when first using ROM Manager. I found out eventually that the little swirls are ads loading.
After upgrading to Premium and getting rid of the ads, ROM Manager has worked fine for me.
Wildfire
CyanogenMod 6 RC2
Hi, I searched all over the forum here and couldn't find an answer to this. I have a HTC HD2 (love it still) and recently got a HTC Thunderbolt for business. I usually root these phones when I get it so no surprise here
I spent many hours researching what I can like I did for my HD2 and am ready to flash the ROM now. I rooted it already and now want to install Das BAMF Stripped but don't know how to without Clockwork Recovery. It sounds like a identical process to my HD2 except there is no MAGLDR for this version (not that I know of at least) and I think the Clockwork Recovery install is different for each phone so I can't just flash it.
Do I need to use ROM Manager from the market to do this? I prefer installing it and having the option to boot CWR if possible instead of relying on the application.
Any steps on where to get it and how to flash it properly on the Thunderbolt will be greatly appreciated.
Thanks.
Install ROM manager. From there you install CWR. Then reboot. I wouldnt use it for anything else. You can uninstall it when you get CWR installed.
courtesy of my rooted bolt
I see how it works now. So that's the only way to install it on the Thunderbolt? I was actually doing it after I posted. Up and running on Das BAMF ROM now.
Thanks
Hey guys, ok so I am coming from two HTC Heros (CMDA Sprint)
Was running cyanogenmod on both (me and the wife) loved it.
Now that I have the E4GT, I went ahead last week and used ODIN to install LoStKernel.
Now it did give me root and I have used apps like rom toolbox and setcpu.
My main problem is it seems these samsung devices are a lot trickier to tinker with.
Basically I am looking to get Clockworkmod so I can flash roms and make nandroid backups.
From what I have read, I need a kernel that supports and/or has CWM in it.
I tried flashing CWM with rom manager, and it installed - but I have no option to backup/restore I can only flash a zip or clear cache.
There are SO MANY things posted in the development section and I do not know which kernels are the latest, best etc.
I need:
a) CWM/busybox
b) overclocking support
c) FULL stock functionality (no loss of wifi or something stupid like that)
From what I am understanding the kernel is included with a rom. But I can't flash a rom without CWM. So I am rooted but stuck with stock rom and it's kernel.
Confused, lol!
Can someone point me to a proper thread to get me CWM and a well supported ROM to install? Can I get CWM working fully on the stock kernel/rom?
If someone can point me to the right direction, maybe I can find a developer to donate to lol!
No love?
At this point I'm just trying to get cwm. Seems I may have already had it just didn't know it came with lostkernel and now I botched it using rom manager.
Sent from my SPH-D710 using XDA App
You can actually flash a new kernel with CWM in odin
Thats the easiest method
There are several, as for the best I dont know yet
Im still tinkering with my setup
I guess that's my main issue - I can't find one that has CWM, everything I am seeing is a ROM that needs CWM to install.
If I had CWM I'd be all set because then I can backup my setup and try new things without worry, but I don't want to use ODIN to try a kernel that CWM won't take, or isn't there, and then lose what I have ya know?
All set, seems I flashed a kernel that wasn't what it was supposed to be. I apparently flashed his earlier version (pre-LoStKernel) that did not have CWM5 it it.
Just used ODIN last night to drop in LoStKernel and kept root, but also have CWM5 now. After clearing my SD Card, made my first backup. 1.5GB, jesus! lol. Nearly my whole SD card... yes, it's from my old Hero, so, time to get a 32GB.
Hi everyone,
I'm sorry I'm quite new to this, and I'm afraid I've gotten myself somewhat stuck with my Nexus S. Yesterday I managed to root it, install superuser, as well as clockwork mod. Today I wanted to try a new rom and after some attempts, it seems I no longer have any working roms on my phone. After much searching with no luck, I turn to you guys for your expertise.
So I am able to see fast boot upon pressing the volume up and power buttons, and am certainly able to choose recovery and get into clockwork mod. Within clockwork mod I can mount USB storage, so I can transfer roms to the internal SD card. I've tried 3 or 4 roms, some say they install correctly, others not, and after trying to boot after any installation I simply get stuck at the google screen with the lock image at the bottom. The only things I have "deleted" is wiped the data and cache. I have no idea, but I think I may have erased the bootloader image or something else that I should not have that is required.
I have a i9020a model (non-4g model I believe), can you pleeeeeeeeeeeeeaaaassee help me!! I just want to get back to gingerbread 2.3.6, and my phone back up and running the way it was. I've become quite nervous after some searching with some saying a resistor mod is needed on the hardware!!
Your okay cause you can get into fastboot and recovery so don't worry. Maybe the rom you downloaded is not for your phone. Did you make a nandroid backup before flashing the rom? If yes then go into backup and restore from clockwork recovery to go back to stock.
Sent from my A500 using Tapatalk
If you can get to recovery, just flash the stock image FOR YOUR PHONE. Then you can go through and reroot..don't worry, you'll get the hang of it.
Sent from my Nexus S using Tapatalk
So my phone is not "bricked" as they say?? I'm not in big trouble?
I did not make a nandroid backup What kind of image am I looking for and how do I install it on the phone? I know my phone is of the variant i9020a, but how am unsure of how much more specific I should be looking for.
Looking at the following post: http://forum.xda-developers.com/showthread.php?t=1063664.
Should I try installing the Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader option?
Choose the latest 9020a version of the FULL ROM, which is what you have already have eyes on.
I've tried installing the file I mentioned above, but I get a status 7 error when trying to install, and the install is aborted.
Could I get some more assistance please? Can anyone point me to a correct, full rom? Or perhaps I'm installing it incorrectly, could someone be so kind to outline the correct steps to a proper install?
Edit: I think the above mentioned file is for a GSM model, I'm sure I have the CDMA version.
Also, somewhat good news. I managed to install the oxygen rom, but for the 4g version and installed fine with no errors, but I have no service. What does this indicate, as I still want to restore back to a factory version (non-4g) of gingerbread 2.3.6.
What CWM version do you have? Is it 3.0.0.0?
Also, if you have no service, it's likely that you downloaded a ROM with an incorrect radio.
Edit:
If you have CWM 3.0.0.0, make sure to download the latest version, found in this thread: http://forum.xda-developers.com/showthread.php?t=988686 (use 5023-cyan.img). You flash this the same way you did CWM previously, though in the terminal make sure you type out the 5023-cyan.img file name.
Next, download the stock ROM from this thread: http://forum.xda-developers.com/showthread.php?t=1063664. Simply look for your phone version, and you'll find the correct software variant.
Maybe you've fixed your phone already; if not, I hope this helps!
I wish you the best of luck. Oh, and through problems like these, you come to learn a lot more about your phone. That's what I've found, at least.
At the thread you mentioned above there is a version with a different radio, you might want to give that one a try.
You also said that you only wiped data and cache, so maybe you should do a full wipe before. Not doing that can sometimes lead to problems.
Sent from my Nexus S using XDA App
To be brief, the phone is up and running as brand new! Thank you so very much everyone. It seems the error was with CWM, as I was able to install and boot a 4g oxygen rom on my phone, I went into rom manager, and at the bottom of the list was an option to upgrade to 5.x. Installed the CWM update, wiped everything and was able to install the factory rom, no issues, and everything works just as I remember
I have most certainly learned more about my phone, and I am going to look at it as a rather stressful learning experience rather than a mistake on my part.
But a sincere thanks to everyone once again, I posted this at like 4am here and had a response within a few minutes, I was pulling my hair out haha!
Flashing to stock rom will help you out. You can get stock roms from Internet simply by searching in Google...
Sent from my Nexus S using XDA App
Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.
I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk
I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA
Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.
Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.
I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though
I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).
I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.