[Q] VOLTAGE CONTROLLER help me !!! - General Questions and Answers

Hi, did search but nothin about Voltage Controller,, need help to get mine going, so i can use cpu govners etc, i tryed both version 2 and 3, all i get this is BAAAZINGA!!!! "Unsupported kernel detected, You are running a incompatible kernel. Toget one head to XDA, "Do it for me (not implemented yet) "Get Kernel" "Exit" cant see any help, have i missed somthing??? finally got my ph back working after days of stuffing around.... working now, Samsung Galaxy S i9000 2.1 eclear stocked now updated final worked to Darkys Rom ver 9.2 now froyo 2.2.1,,, im scared to flash now because the ph use to have a fit after flash the reboot (screen logo stays on or off with vibrating "buzz......buzzz,buzzz,buzzz.................buzzzz............ buzzz,buzzz,buzz repeats for ever!!, as i said i have it reflashed to an Australian 2.1 because theres none for New Zealand "how stupid!!!" at lest i got it going, then flashed to Darkys Rom 9.2 all going good so far but cant get Voltage Controller to run help thanks.....

Related

[Q] Soft Brick From Nero 4.1 w 1.4ghz kernal

Samsung Vibrant Anyone with help/advice would be helpful. Thanks in Advance. Samsung Vibrant
Rooted with SuperOneClick 1.5.5
Installed Clockwork Mod
Installed Nero 4.1 (newest addition 1/13/11)
Installed Overclocked Kernal DoW 1.4 Ghz
Everything work fine then on reboot the phone froze on the TW screen with the expliosion right as the phone is rebooted. Waited forever no luck getting it started.
Tried the Odin method to restore the phone back to factory with no success. Everything seemed to work phone connected installed .tar the whole 9.
The phone went to restore and I recieved a checksum md5 error bunch of numbers after & when the phone reboots it does the whole vibrant t-mobile intro flying galaxy S deal then it just turns black??!!??
Any suggestions or if additional info is needed let me know , again any help would be greatly appreciated.
Fixed lol thanks for the help.
Odin
Eugenes no brick
stock
fixed
now
nero 5
dragon 2.8
smoooooooooooooooth

[Q] Flashing kernel question

So im definatley new to rooting and have a quick question. I rooted using Z4, flashed djo5 modem, super clean rom and non voodoo kernel. When I flashed the stupidfast custom kernel it gave me a wierd looking boot screen. I think it flashed ok but in the about phone section it says kernel version 2.6.29 is it supposed to say stupid fast. Phone seems to work fine but not sure if kernel flashed right. Any feddback is greatly appreciated.
I am unfamiliar with that phone and firmware, but if everything works as it should I would say its ok, sometimes devs personalize installs like that, if you install voodoo lag fix for galaxy s the phone talks to you in sexy female voice during install.

[Q] Nothing but problems with Darky's Roms

Can someone with a Bell issued Samsung Galaxy S GT-I9000 tell me if they've had success with any of Darky's latest roms?
When I got my phone 3 weeks ago, I installed 8.1. I had a problem where the phone answer app would crash when I received a phone call.
I upgraded to 9.0.1 when it was released and the phone app crash was solved. However, other apps would often crash, and it seemed slightly buggy. At some point, i rebooted the phone and the boot screen would go for 15s, then freeze momentarily, then resume. This would happen over and over again, indefinitely and the phone would never boot.
This morning, I upgraded to 9.1. However, apps are still crashing. For example, I'm unable to open the Market app. It crashes immediately. This is after I added my google and exchange accounts and successfully received all my email.
Not sure what to do at this point. Does anybody have any ideas?
My gf has a Bell i9000m and is running Darky's 9.01 without any problems.
I would suggest you start from scratch by first unmounting the internal SD and format it. Copy Darky's ROM to it. Then boot to recovery mode and do a full reset in CWM recovery, and re-install from ZIP again.
She came from stock 2.1 JG2 to Doc's V8 and Darky's.
The current Darky is kind of buggy, if you could find the 9.01, that is a better version.
hi there...
i have a gs I9000M,running the latest Darky's 9.3 beta1. ive installed it yesterday...running without a glitch,very fast and battery last much longer than it was on froyo.
the only thing is that i had to install jl2 modem for Quebec use after the first install of the ROM.
and for the darn gps fix...with darky's.....wow...in less than 10 secs,its locked on at least 4 sats
now updated to darkys beta 3 via darkys configurator...no wipe and without a glitch...
running voodoo kernel,alternative wifi driver ticked
heres what i have on my GS.
GT-9000
2.2.1
I9000UGJL2
[email protected] Voodoo 5.4.1
Darky's beta 3 xwjs5
quadrant full benchmark test.....
1482
wifi issue
I cant connect to any wifi network can anyone help me?

[Resolved] [Q] CM7 GT-S5570 installation problem

Hi,
so here's my situation: I've previously installed CM7 by tj_style (http://forum.xda-developers.com/showthread.php?t=1167750) on my phone and everything was working fine.
About a week ago, I flashed an overclocked kernel by squadzone (http://forum.xda-developers.com/showthread.php?t=1344440) (I flashed the 782MHz kernel, but after that for a while and getting a lot of shut down, I turned the max frequency to 715, which stabilized the phone) and again, it worked well.
I downloaded an app called Cpu Tuner from the market (https://market.android.com/details?...SwxLDEsImNoLmFtYW5hLmFuZHJvaWQuY3B1dHVuZXIiXQ..) because I wanted to try a new cpu tool (Had Antutu's Cpu Master free edition before). I used the "Check phone's capabilities" option on the Cpu tuner, and all of a sudden the phone just reboots straight into recovery mode. I try rebooting the system, and it gets stuck at the CyanogenMod logo, starts looping it without ever actually booting into the system.
I've already tried wiping data and cache (a lot), going back to stock Gingerbread, which by the way, does the same thing, loops the Samsung logo, re-installing the CyanogenMod and just about everything that comes to mind..
Is there anyone with a similar problem or any idea on how I could fix this?
PS: sorry about all the links, thought it might make it easier if it was clear what I was talking about
Okay, so I managed to get the phone working after all. I was already pretty hopeless, I read a few threads about the Riff Box and was ready to send my phone to the service, but I wanted to take a few last shots at it.
I got it to work by first flashing back to froyo, a package S5570XXJL9 that had separate files instead of a one package, then Gingerbread S5570XXKPI again with separate files, then to clockwork and finally CyanogenMod 7
Hopefully this thread may be of use to anyone facing the same problems as I've faced

HELP! 1337M flashed with custom rom now radio not working!

Hey everyone. So ill give you a quick background here.
I got the new sIII so I took my old sII and rooted it and started messing around with roms ext to get to know the basics, I still dont know them but at least I didnt brick my new phone. Got used to odin, CWM and TWRP(not so much still getting ot know this one)
So I now have the sIV (sgh-I337M) and I was upset when I bought the galaxy gear watch and couldnt connect it to my phone. (OBV because it isnt a note3 and its not running 4.3 JB)
So I go on a mission. Rooting and Rom'ing my SIV to 4.3. some roms worked, some didnt. Found one that worked flawlessly! installed it started setting it up the way I wanted it and everything was going well, all the while connected to wifi. The problem comes when I tryed to text someone. I have no radio.... Crap.... So I realized maybe its because I didnt install a build prop?? What is a build prop? How does one install a pre-made build prop? is this even my problem?
Here is the thread I used to get my rom (The only rom that isnt constantly having "com.xxx.xxx" unexpectedly stopping or failing) and it runs flawlessly on my phone except for the radio problems... I downloaded and installed 2013.09.07 ROM
I assumed the attatched file ge4.3-build.prop-i337m.zip is a build prop that I need to add into the phone some how and this may fix my problem.
I know this type of problem has been addressed a million times. Unfortunatly Im at work right now and I can take the time to search thousands of threads for this answer. altho I assure you I never registered untill today because everything Ive needed to know untill now has been answered with a bit of searching thru this exilent foums culture.
ANY HELP GRATELY APPRECIEATED
quick recap!
SGH-I337M
Rooted and flashed ROM on http://forum.xda-developers.com/showthread.php?t=2370205
Radio now not working. EVERYTHING ELSE RUNNING FLAWLESSLY
and I LOVE THIS FORUM.
Now once I fix this problem. Im going to tackle installing windows mobile OS on my s2 just for s's and g's

Categories

Resources