I own an MDA compact on t-mobile uk,
whilst on there homepage i saw a "update your MDA software"alert,
i downloaded the software and ran it.
the MDA then went off and when turned back ran a hard reset.
the MDA then runs thru the set up,when thats complete is shows a grey type screen with serail v1.02
its frozen on this screen and unuseable any effort to do anything makes a repeat cycle of the above
please help me turn my paperweight back into a pda
thank you very much
(i think im best sticking to a standard phone from here on in,im not techy enuff to have a pda.doh!)
ur just in bootloader..go read wiki
u gotta press the reset,power and record camera btton together..thats wot i do for my 9090
thank you very much for your help
its appreciated .
ill try that
thanks again friend.
Jace,
the power & camera & soft-reset button will bring you in bootloader, just where you're now.
You'd better connect USB & run the update again. Something got broke the previous time, that's why you're in bootloader now.
Regards, M
brill guys ta
only problem(sorry guys still learning)from the bootload screen the pc wont see the device is connected and if i try to run the device to get to a standard screen to sync it just reboots?
how do i actisync while in bootloader?
ta
Jace pls don't try Act.sync. Run the update again :!:
ive manged to get the pc to see the pda and ran it under a guest partnership,
once it had seent he pda, i re-ran the update,but each time it goes thru the motions then gives and error msg.
man im goin back to a normal handset next time
What rom nr are you flashing? & what's the error message?
Cheers, M
Thanks for all your help sorry to be such a pain.
i got the file from the tmobile uk site .
file name ma-tmuk-11300-128-11200
when connectiong its says
updating from
device ce image:1.13.00
device ext imagethis is blank)
deivce radio:1.12.00
up dating to
device ce image:1.13.00
device ext image:1.13.128
deivce radio:1.12.00
it runs thru then stops and says
error 101:connection error
thanks
when booting up the bottom right shows
R 1.12.00
G t1337.42
D 1.13.00wwe
Ok that's the 1.13WWE rom, which is available sine october last year. Should be a normal rom without problems. If you never updated before & still in your warranty period, return your device.
BTW have you rebooted your PC during your sequence off tries?
Guess your no pain, but you got bad luck in upgrading this time. You did the right steps to cure everything.
Cheers, M
great thanks,
i have rebooted pc but ill do that then retry nothign to loose at this stage thanks mate
Did you ever make a rom-dump of your working device? Otherwise you can try to make one now & do a SD-update.
Cheers, M
no i didnt mate doh
ta for all your help mate appricated
my xda 2 stocks up during start up..i dont know why it happens..but during start up, it freezes..and can no longer be used..i tried everything...but, still didn't help..i upgraded my OS to WM 5..it works smoothly..but after about 4months, this came to happen.. i tried reflashing the ROM..the process says it's ok..but whenever i open the device, it still display the previous problem..as if nothing is changed..my owner information still displays..then hangs.. now what should i do?? reflashing should have erased all the previous data..but why is it happening??? guys, i need help please..
XDA 2 poblem
well we have almost The same problem my frend..
I also falsh my rom from windows mobile 2002 to wm6.0 and my screen hung..
Restore possibility
Try to restore
It's about 50 : 50 to success.
Upgrade without running activesync on PC. (task manager, kill wcescomm and rapimgr on the running task list.)
** Connect PDA to PC**
Then do hard reset while press camera button. So, you should press camera and power while resetting. (Do this while connected via craddle/cable)
if it's worked, you should see 'USB' on your screen.
Run your update utility on your PC.
Then you'll see that your PDA has no rom. Restore your ORIGINAL rom version. Your device will reject of you don't.
Good luck.
Can anyone help me with the fact that my Diamond 2 won't start anymore, it won't come past my HTC logo anymore after i installed the Blackberry CAB file for WM6.1. With Active Sync i am still able to connect and see the content on the device, so i tried to remove the install via Active Sync Add/Remove Programs.
After booting still the same.
I had a Dutch ROM on it, and downloaded a copy of it via link from xda-developers because i had no backup. How do i proceed? The device has no SIM Lock.
1. How can i restore these .RAW files ?
2. What utilities do i need to restore ?
Any help is very much appreciated, i am lost and this happened only 2 days after i have the device and the first program i installed
junky said:
Can anyone help me with the fact that my Diamond 2 won't start anymore, it won't come past my HTC logo anymore after i installed the Blackberry CAB file for WM6.1. With Active Sync i am still able to connect and see the content on the device, so i tried to remove the install via Active Sync Add/Remove Programs.
After booting still the same.
I had a Dutch ROM on it, and downloaded a copy of it via link from xda-developers because i had no backup. How do i proceed? The device has no SIM Lock.
1. How can i restore these .RAW files ?
2. What utilities do i need to restore ?
Any help is very much appreciated, i am lost and this happened only 2 days after i have the device and the first program i installed
Click to expand...
Click to collapse
Have you tried just hard resetting the phone ?
I tried this, by using the red button under the stylus in combination with the volume. My alarm is still working and the screen pops up but nothing else then my HTC logo. It looks like something in the loader process is screwed
I have no idea how to get this repaired again ! If you have any suggestions i would be happy to hear, feels misserable that you can screw the OS by installing just one program to it.
Denco you're the man !
I didn't proceed correct with the hard setup, now i did !
Thank you so much you made my day ! feels much better now.
Regards, junky
need help...
i recently purchased htc mozart..and was updating to mango..when the update was at the end there was a connectivity problem and the update was failed...after that when i tried to start my phone its not booting up...it just shows the htc logo,vibrates few times and stops there...
i even hard reset the phone but still it doesn't bootup...
pls help me guys..
Guys, need urgent help with my DOPOD C800. I tried to upgarde its ROM and then was trying to intall WM6 on it.
However, I could only get to the stage of the ROM flash when the screen turned white and my phone went dead. Now the phone would not even switch on.
I am quite inexperienced with these PDAs and tried the reset button after looking it up on the net. That did not help either. Now i'm stuck with an expensive phone which won't even start up.
Please advice me about the further course of action.