Database Info

[Q][GT-i9020a] How do I reflash back to factory?

Hi, new Android user here.
I was trying to root my Nexus S phone yesterday and I'm having problems. There is a lot of rooting guides out there and I used one from xda and also one from unlockr.com. Managed to root the phone ok (I think), but everytime I flash a custom ROM, the phone won't start at all, it just sits at the boot up screen and repeats itself.
So I'm thinking, I should just start over again. So I flash the stock ROM from xda back to 2.3.1. Everything seems ok, the phone starts up... but it's always stuck on airplane mode and the phone itself doesn't even show stuff like IMEI, mac address anymore.
So now I figure I've probably messed the phone up enough and need help lol. How do I go about reflashing the stock ROM and getting my Nexus back to out of the box condition (Stock ROM and no custom bootloader)?? Any guides or step by step instructions would be very helpful.
Thanks

Did you wipe before flashing roms?
Sent from my Nexus S c",)

Maybe flashing the KB2 modem would help that but the 9020a came stock with 2.3.3 and not 2.3.1 so that could be it...I'm not sure but that software wasn't meant at all for ours so it could be part of the problem. But if I was you I'd take a look at this thread wich has all the stock software for your phone. Make sure you wipe everything in clockework and then flash the stock rom. http://forum.xda-developers.com/showpost.php?p=13123996&postcount=39
dsixda uploaded the stock backup and the stock recovery, you can read more at that link, good luck hope it helps

You can download the full stock ROM from the link below:
http://goo.gl/8P8vl
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.

jungbum said:
You can download the full stock ROM from the link below:
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.
Click to expand...
Click to collapse
that did the trick. thanks everyone, now time to try rooting and flashing ROM again!
hrm lol now trying to update it to 2.3.4, it downloaded the update, but on reboot i get the white triangle with ! in it :\
this phone is so messed now
edit: well now everything is ok again, wiped data, flashed with CM7 and now it says 2.3.4, go figure.

[Q] Need help!! ROGERS Infuse!! Installing roms!

hey so i really need help! i just bought this infuse not to long ago and now im trying to install roms on it. yes it is rooted im not completely new at this i have done it before in the past with other phones but when ever i try to install roms on this phone , well first of all i cant even boot into the cwm recovery my phone wont let me and second i get a e: signature verification thing comes up i cant install roms..... someone please help me and give me detailed instructions on how to do this?

are you even able to boot into stock mode or have you borked it?
edit: if you have borked it- -soft brick- you need to start over with any one of the back to stock flashes and start over again..

1. Flash to stock Rogers UXKG3 Gingerbread packages (rooted) with odin packet.
http://forum.xda-developers.com/showthread.php?t=1193927
2. Install SGS kernel flasher from market or apk file.
http://forum.xda-developers.com/showthread.php?t=877444
3. Download kernel Infusion-GB.1.0 put in SDcard.
http://forum.xda-developers.com/showthread.php?t=1212485
4. Open SGS kernel flasher choose kernel...zip and flash kernel, waiting for restart
5. Now, your phone will have ClockWork Mod (CWM) for install custom rom.
6. Choose custom rom and follow method.
Enjoy.
Sorry, i m not good in english.

rainbow
I installed att pda instead of a rogers pda. now that i used rogers pda my first rogers splash screen is rainbowed and the lfs is now named logo.atnt.jpg. what do i do? i tried gtg unbrick i tried odin rogers stock uxkg3. and tried installing infued v2 . still no luck

[Q] Stock image and recovery

Well i am new to htc and just moved from samsung which has a very different boot loader. I rooted my htc sensation, super cid it and s-off. However when i flashed a custom rom insert coin. I did not make any backup or any nandroid backup (really stupid of me) since samsung has the download mode to go back to stock recovery easily. The thing i am facing is i can go to boot loader it displays s-off hboot and radio. However when i put the PG58IMG.exe it updates the recovery but when i take it off my sd card it shows image not found. I have team win recovery at the moment and i can boot into that as well. I have tried to flash the rom over and over again. This whole problem occured when i flashed the firmware update for insert coin. It runs into boot loop. Is there any way i can recover the stock version.
Thanks in advance i am really a noob for htc. And can you please provide me with the exact files please i have looked into htc sensation thread for 2 hours almost flashed everything but doesnt work for me. And i am using my laptop for the transfer of files since i cannot put any files while the phone plugged in.

hey, mate, i feel for you..
try to reinstall 4ext recovery, then re-flash the rom u are trying

Hey thanks for the reply bro...just a quick question but how can i install the 4ext recovery cuz i can stary the cell phone. Can i flash the 4ext in win team recovery? Can you please elaborate on that
Sent from my SGH-T989 using xda premium

recovery's website with download that you can install from SD in your current recovery.
http://4ext.net/
the updater can be downloaded from the market

[kernel]+[Recovery] Telstra Stock 3.0.31.

Here is the kernel and recovery from the original Telstra "I9305TDVALI6_I9305TTELALI3_TEL.tar.md5" for the GT-I9305(T)]
in a flash able zip to use with CWM
File is 10MB
Oh rite the link​https://dl.dropbox.com/u/49213633/Telstra%20GT-I9305%20Kernel%20and%20Recovery.zip​

Re: Clockworkmod
Gday mate i was wondering what version of clockwork mod are you using on your GS3 telstra 4G thanks for your time

This is stock recovery. no clockwork mod. this file if primarily for user that would like to revert back to stock before taking there phone in for a service.
or are in need of the stock kernel and recovery for some reason without the 1GB download

[Q] Going back to my Stock Rom

I have a THL W100 Rev1 Phone.
Recently I installed CWM Recovery on it. I also flashed my original(Stock) rom to a Miui Rom I found on Needrom.
Problem is, Data won't work on that Rom, for whatever reason, so I'm not interested in keeping it and much rather go back to my original rom.
I tried finding the Stock rom for my phone, but some are in .rar files and require a different flashing method...
Can someone point me in the right direction so I can get back my stock rom? Is there a .zip file I can use in CWM Recovery?
Thanks for the help in advance....I'm sorry for the noob question...

bump

Day 3...and I'm still bumping

Day 4....bump

Day 5 --- Bump~

Day 5.5~ Bump~

Day 6~ Bump

Bump~

Bump~

bump

bump~

bump~

proxydouble1 said:
I have a THL W100 Rev1 Phone.
Recently I installed CWM Recovery on it. I also flashed my original(Stock) rom to a Miui Rom I found on Needrom.
Problem is, Data won't work on that Rom, for whatever reason, so I'm not interested in keeping it and much rather go back to my original rom.
I tried finding the Stock rom for my phone, but some are in .rar files and require a different flashing method...
Can someone point me in the right direction so I can get back my stock rom? Is there a .zip file I can use in CWM Recovery?
Thanks for the help in advance....I'm sorry for the noob question...
Click to expand...
Click to collapse
In order to flash .rar files you need to use the program SP flash tool on your pc. You can find tutorials on Needrom.