Hi Folks. It seems that it only took me 4 days to get a brand new G-Tablet bricked. I installed dxTop Pro and it crashed my unit. When it came back up I am in a Force Close loop for dxTop Pro since this is the shell I was using.
I can't seem to get the unit into safe mode. Is there a way to do this on a G-Tablet? I am running the stock TapnTap with just the Enhancements Pack.
Any Help would be appreciated.
Also, this unit seems to be a hackers dream and a users nightmare. I am a big techie and I don't mind hacking around with this thing to get it setup properly. However, I would like to get it to a point where it runs reliably. I am starting to think that this is not going to be possible. Has anyone had a G-Tablet running where it is not problematic? If this thing is just going to be a hackers testbed then I am going to return it before it's too late.
Try holding down the + volume button and then hold down the power button. Keep both pressed in until you see "recovery key press detected" (or something like that). That will boot you into recovery mode. I use clockwork recovery, so I don't remember what the stock recovery looks like. There might be a cache wipe there. If so, try that first. There should be a factory reset there. If you factory reset, you get a tablet like it was fresh out of the box (you'll lose your settings and data from the last 4 days).
To answer your other question...this is not a perfect out-of-the box, everything-works tablet like iPad is. However, there are ROMs and tweaks here that give you a pretty awesome user experience. Some of them are exactly what you said--a playground for techies. My opinion is TNTLite is the best way to go for the user who isn't as excited about all the techno gack. Read the first page of this post:
http://forum.xda-developers.com/showthread.php?t=842004
It takes some reading to get it done right. And there are weird things that happen from time to time. It's impossible to ruin the tablet, but some of the fixes are deeper-tech and it can get frustrating. Mine is running great, TNTLite is stable, the hardware is very good, very fast. This tablet is much less expensive than the other ones that will be coming out this year. But the reality is that many of those will have a much better user interface and a better out-of-the-box experience.
The best thing to do is install Clockwork recovery. The stock recovery is worthless. This tab is virtually unbrickable. Install clockwork from this link and dont use Rom Manager.
http://forum.xda-developers.com/showthread.php?t=865245
Clear data/cache after installing clockwork
Force close loop
Ok, I cannot get back into recovery mode. When power button + volume up button pressed simultaneously the viewsonic then gtablet pics will come up but then screen goes blank then nothing. I have to shut it off to try again.
If I let it run, everything boots up then finally into vtl but I can never access the main menu because of all the force close windows and then finally the vtl force close window keeps popping up to no end.
What can I do???? Please help, I have researched site but to no avail.
Jerry
Related
Hello, This is my first post. I have the vanilla GTAB with the 2 updates that were automatically loaded last Dec. & Jan. I frequently get force closes. Today when I booted the gtab, I had it connected to my pc, but I clicked 'hide' at the activate usb prompt. Then the usual force close occured in Launcher pro. At the same tiime there was a prompt that said something like "which app to use for this action" 1) desktop or 2) launcher pro. Since I thought I already set this to Launcher pro, I selected Launcher pro, and (this is the important part, I think) I checked the box to make this the default action. I had done this before so I didn't give much thought to it.
Well, the device immediatel began looping between to 'force closes' that look similar: 1) The application LancherPro (process android.acore) has stopped unexpectedly. Pleas try again; and then the second half of the loop is 2) The process android.process.acore has stopped unexpectedly. Please try again.
Note that in #2 it doesn't refer to LauncherPro.
I rebooted the ddevice and it immediately goes into the same loop.
Is there any way out of this? I can't help thinking it is caused by making the failing app (Lpro) the default action. How do I get the prompt back? Or have I bricked this gtab?
I was able to activate usb support between loops, so I have backed up all my data to my pc (whew!), but I can't get the device to do anything on it's own, other than loop. I do not have a recovery file or any of the suggested clock??? utilies. This is a completely vanilla device. Therefore booting with recovery (power + vol +) just comes up and enters the same loop.
Sorry if this is long winded, but I want to hear any advice before I follow Viewsonic cust support's instructions to ship it to them for a hardware reset. TIA, -Jim
Try Fix Permission in the Recovery. I face this problem every now and then and could not find a better permanent solution . Its really painful at times. It usually happens when my Gtab awakes from a long sleep (like remaining in standby for overnight).
I just experienced the same problem the other day. It is my third time with all the loops and force close and android.process.etc.etc. Unfortunately the GTab with the stock OS has this troublesome issue. I followed the instructions to install clockworkmod (CM) restore to stock with the 3389 mods, and now when it happens I boot into CM and first try and clear the cash and if that dosen't fix the problem then I do the wipe data/ factory reset option which is a pain, but if you have backed up everything you are back up and running with everything restored in less than 15 minutes. Do a quick search and you will find the CM solution to get your tablet back.
Hope this helps! I think everyone who has this device has gone through it. I guess for the price what can you expect, $799 for a XOOM without flash or $350 for the Gtab with flash and some issues. There is always a trade off.
Thanks VERY MUCH for the replies. So minardml, it seems you have done the factory reset yourself. Is there instructions for this online? You took the back off the unit to do it? I will search for the CM solution. Also, kshwetabh, you are right it had been several days since I used the gtab. Could you explain how to "try fix permission in the recovery?"
newbieJim said:
Thanks VERY MUCH for the replies. So minardml, it seems you have done the factory reset yourself. Is there instructions for this online? You took the back off the unit to do it? I will search for the CM solution. Also, kshwetabh, you are right it had been several days since I used the gtab. Could you explain how to "try fix permission in the recovery?"
Click to expand...
Click to collapse
@newbieJim, before wiping cache or factory resetting try Fixing permission option. It always works for me.
1. Reboot system into Recovery (Shutdown. Press and hold Volume Up(+) button and press Power button.
2. Select "advanced" ( scroll the options using Volume up/down button). Press Home button when on "advanced" option
3. Select "Fix Permissions".
This will take a while (depending on the packages/apps installed). Note that you will not see any progress bar. Once complete simply reboot.
Hope this helps . I don't know how the system looses permissions but somehow it does.
-------------------------
kshwetabh
NexusOne [Cyanogen 7| Desire HD| MM Cyanogen 7| Looking for 720P mod]
GTab [Vegan latest]
http://kshwetabh.wordpress.com/
Sorry if I led you to think that I took the back off as I did not do that. The options that I was refering to are in the menu of clockworkmod. If you haven't found the fix I was talking about (installing CM) post again and when I get home later today I will see if I can find it. I think I may have bookmarked it on my laptop.
I just keep the home button prompt on. it seems to prevent 90% of FCs and also improved the screen lag i was getting.
it may be another step, but it's less of a pain the the ass in the end.
Once again thx to all. I will attemp recovery again, but I don't have high hopes because, as I said, the loop happens even in recovery (or safe) mode. IOW, I cannot get to any menu or screen.... Only the loop. I do not think I can install any new app., but I will try tomorrow when I return.
I have an unlocked HSPA+ Galaxy Nexus imported from the UK to the US. Ordered from Negri Electronics.
It's not rooted or modded in any way.. Mainly because I don't know how to. As far as I know, it's running stock ICS.
I was using it normally, (using the fb messenger app if it makes any difference) when it suddenly rebooted by itself. The Google logo comes up, then the start up animation, and sometimes the home screen will appear but is not touch sensitive (i cannot slide it to unlock), and then it 'hangs' and the screen goes black. Repeat.
I've tried to fix this by myself and there's a video on youtube (sorry, noob here. can't post links. video is by robbidwv and title is "my galaxy nexus won't boot..") of the same problem that I have, but the posted solution doesn't work for me.
So far, I have entered Coin Mode and pressed Start. Entered Fastboot mode and gone into Recovery Mode (no options appear after that. it just starts booting up and the loop begins), and I've also tried Restart Bootloader.
I've almost given up. Now all I want is to extract my SMS, if they're still on my phone. I can't access the folders on my computer because it won't boot up and connect. Is there a way that I can extract my SMS by using DOS in either Coin Mode or Fastboot mode?
Or even better, does anyone have a solution to this boot loop problem? I'll contact Negri Electronics tomorrow and hopefully they can send me a replacement.
Please help!! Thanks
that problem just started happening with me an hour ago!!
i hate this!!
we need a solution please!
Hey guys, sorry about the issue.the major problem I see here is you wanting to retrieve your txt messages, which might be possible with a little Modding, but if yourwilling to lose them to get a working phone back, then this is what your going to have to do. Make sure your phone is completely off. Hold the 2 volume buttons and the power button together. You will get into a mode with an android Guy. Press the volume button up or down until it says reboot recovery at the top. Press the power button. It will rebootand come to a screen with an android. Hold volume up,down and power at the same time. A menu will come up. Go down to wipe data. Click it, and after it is done reboot. Your phone should work now.
If this helped you, or you simply appreciate me taking the time to write this out then please press the thanks button
Hey!
Thanks. Yeah I 'fixed' it already. I was just about to post something similar. After a while I just gave up on trying to recover my data. Good thing that Google syncs everything so the only issue would be recovering my messages, which I decided weren't worth sending it in for a repair which would probably not be able to recover anything anyway.
The thing I didn't know about was to press power + volume up WHILE on the recovery screen. I thought navigating to the recovery screen was it!
Still, this kind of sucks. I love my GNex, but I can't help but be slightly pissed seeing that my crappy iPhone 3GS never did this in the 2 years I had it. Oh well, hope it doesn't happen again!
hey guys! i also did a complete wipe on my phone and got it working again!
but i wonder why this happened in the first place?
last application i installed before the crash was double twist, i dunno why but i feel that it was the reason behind the boot loop!
Sorry for reviving this thread, but I just had this happen to me TWICE!
It happened to me first last Monday, the 23rd - the phone crashed when trying to send an email with an attachment - and went into a boot loop - Google logo would appear, no make it to the animation, and reboot....
I performed a full reset and things worked again. I didn't install all the apps I had before - figuring it must have been due to some app messing with the OS.
Well, it happened again to me yesterday! I was connecting to my bluetooth headset when the phone crashed and went into the boot loop. Full reset worked again, and I've installed even fewer apps - essentially only those that I use on a daily basis.
My phone is still on 4.0.1 and I'm hoping once 4.0.4 is pushed this may get resolved? I have a canadian GNex from Negri. I will call them again (I called the first time, but when the full reset worked I never contacted them again).
I would like to this this is a software issues, and not hardware.
I have the same problem. If you figure it out let me know.
Today my phone also entered a boot loop: [Google logo]->[black screen]->[vibration]->[Repeat]
I tried Recovery Mode, but this is what happens: (sorry for the link but I am not trusted with powerful tools such as outside links apparently, as I have not yet reached the maturity of a person with eight posts... )
dl(dot)dropbox(dot)com/u/53568097/Android.jpg
This is what I see when I navigate to Recovery Mode
For a split second I can see an image of an Android with spinning cogs in his innards, but then this little sad fellow appears. WTF is this?
EDIT:
Oh, and I'm running Android stock 4.0.2, never rooted or unlocked, Swedish. At the time when the phone started doing this, I was using Endomondo, and was about to set off on my bike when it died on me.
Stock ROM galaxy nexus bootlooping after wiping data also.
Hi,
My GNex went into a bootloop so i searched xda and found that factory reseting would be helping my prob. But after wiping the data also its still in going through the loop . Please help .:crying:
I've got a rooted (Super SU, but the original root manager was Superuser) LG C800 that I was having problems with. To be specific, I installed some apps on to the system. Some of these apps would be Titanium Backup for root, Avast Mobile Security, ROM Tool Box Lite, Super SU, and a quite a few others. From day one they seem to be kicked right back to my S.D. card, but not all at the same time, and some would stay on the system. I read where I should move the apps back to my S.D. card and try to re-install them on the system minus the data. When I did, the phone went nuts. Now it stays in a restart mode but never fully boots up. Can I salvage it, and if so, please tell me how?! I have tried the hard reset/recovery boot where you hold down the power button, volume, and a few other keys, but it did not work. I'm a broke college student and can't really afford to buy a new phone. I used this one for everything including tethering it to get my assignments done at home and turned in on time. Please help! I'm open to suggestions....... My phone will be completely off. When I plug it into my computer, via U.S.B., it automatically turns it on whether I want it to be on or not. Then it starts off in "reboot recovery" mode, will boot all the way to the point to where the home screen would normally turn on, but then it starts in that "boot loop" all over again but never fully boots up before going back to the beginning of that "boot loop" yet again. I can't even get it to register on my laptop as being plugged in. The reason I took the apps I placed on the system off was because sometimes when I'd re-boot the system the apps would be on the system and sometimes back on my S.D. card without my involvement of any kind other than rebooting my phone. Is completing a Nandroid recovery or re-installation of my ROM even possible with my computer no longer recognizing it as even being plugged in? From what I can tell it won't be. Am I fighting a lost cause or is it salvageable?
Rooted myTouch Q 4G, a.k.a. LG C800
I believe it has a 2.3.4 GRJ22-perf, and then something like 2.6.35.7? I can't remember off the top of my head, and I can't pull it up on my phone anymore or else I'd double check.
Have you tried booting into recovery?
(More about my phone from the original post) Honestly.........I'm not what you may consider technologically inclined. I have however done about as much research online concerning this matter as any one person can do. I've looked it up on all major sites, and many smaller ones too, that post remedies for phone, or "human" if you'd rather, malfunctions. They all talk about still being able to reach a home screen or doing the whole holding the power and volume decrease buttons until I "reboot recovery" screen appears (if that's what you're referring to as doing a recovery reboot as). Don't forget the one where you hold hold the power and volume decrease buttons along with the "A" and "F" keys as well. I even tried one from here where you're supposed to push the genius button after the Android figure leaves the screen. My phone won't allow me to do either. Basically if it's online, I myself, or this girl that's been staying with me, have tried it without any results. On the initial boot the Android figure and the box with the arrow coming out of it show up and it boots until just about the point that it use to switch over to the home screen and it will start the whole "boot loop" over again. The thing is though that the Android figure and box aren't there any other time after the first boot, and with every boot loop it makes after that, the time is reduced from the beginning of the loop to the end when it starts all over again. The phone won't shut off unless I remove the battery and even though my laptop no longer recognizes the device, when I plug my phone into it or another power source and it's off, it automatically turns itself on and begins that boot loop all over again. there is one thing I have yet to try. I read on one site where I could download a custom ROM on my S.D. and then try reboot it, but it never makes it to the point in which the files on my S.D. card are ran, much less scanned. I am still 100% open to any and all suggestions in the diagnosis of this issue. I may record and place a video on one of the more popular "tube" sites to better show or further explain what's happening and then come back on here to post the link?! Feel free to reply back if it's possible you can help before I'm able to complete that later this evening. And thanks for any and all help in advance to everyone.
Good day to all. I'm here resorted to ask about my problem here because I really can't handle it. I been googling for days. I'm ran out of resources from both google and tablet. So, I hope you can help me here. Note I'm going to write this in FULL detail here, so expect this to be a extremely long post. (I been warning you) So here goes....
Anyone uses the brand Ramos?(kind of unpopular brand) I use Ramos W21, it's been using it around 1 year and a half, and it endured a lot of problems, but fixed by researching on online forums and apply various methods there. Now, I think it's finally gave up...
One time, when I opened it and play my usual apps and browsing, it caused the errors " unfortunately
google.process.gapps has stopped", unfortunately browser has stoped",and "unforturnately google play has stopped". Then, I tried to clear data the similar apps in settings as usual, and even disabling them. Then more errors exploded, and "unfortunately launcher has stopped" appears. The menu screen(where the usual wallpaper and shortcut apps are located) turns black, while my running apps are still there running. When I pressed the back key to exit the app, now only tons of errors from the launcher appears endlessly(while the screen is black.
The time I finally turned it off by hard reset it made its way to the main problem: the bootloop.
Okay, here's where the thing gets real. It opens with the usual ramos logo, but the next one is a silver flashing android logo instead of enlarged ramos logo with spinning fire from the letter o(which is NOT my usual boot up screen) When I turned it off, it reopens again up to flashing silver android logo and the cycle repeats, even with pin reset until battery dies out. No recovery mode, so I can't use it to fix this. USB connections can't be recognized when inserted to PC. And no, the tablet is not rooted, and I don't customized anything, no mods, and no fancy roms. Just using a stock rom.
So now what? All I have here is just a sd card slot, which I think there's hope in there. Right now it has two options, deal with it and fix with all of might, or repair it in the nearest repair shop(something that is pretty risky, a lot of fakes and robbers here)
Well, this is the first time I post here, so sorry for anything that goes wrong. Thanks in advance.
Hi, thank you for using XDA Assist. It sounds like a rouge app has replaced your boot animation. Rather than try to chase that down and try to fix it I'd flash the stock firmware and start all over. Unfortunately there is very little about your device on XDA. So you'll probably have to google that.
Solved!!!
Update: I FINALLY FIXED IT!!! IT WAS A MIRACLE!!! O.O
After I keep on wrecking it's power buttons and volume buttons, I discovered something decisive!
This tablet actually HAS RECOVERY MODE! Again, it has a recovery mode! However, the way how to input it is very unique compared to most devices, including other devices from the same brand!
Now having the power of recovery state, I first selected "wipe data cache". The old large Ramos logo with spinning fire appeared again! But it's still bootlooping. So I went back on recovery state, selected "factory reset" and boom, IT BOOTS LIKE BRAND NEW!!! (sacrificing my old data though)
Okay, I don't want this recovery mode powers to be kept only by me. So I'm going to share it to all Ramos users,especially the model W21, like right now!
1. To do this, you need power button and volume up button.
2. While bootlooping, hold the power button and volume button at the same time and it will turn it off(Then expect it to turn on back up again automatically)
3. When it opens up again to the small Ramos logo(no fire animation), now RELEASE the POWER BUTTON ONLY, and keep holding the volume up button. Note, this is important! If you do anymore than this, it will either black out, go bootlooping once again, or ultimately, nothing.
4. Keep holding the volume up button, then the ramos logo will disappear, and now it will enter to our holy grail, RECOVERY MODE! Congratz!
Now when you finally have a normal working Ramos tablet again, you may go there again by turning it off by "Power Off" (assuming that your tablet is open) then holding the power and volume up(then follow above!)
I hope this will help a ton for Ramos users! :laugh:
I'm glad you got it working. You should post your solution here, http://forum.xda-developers.com/general/general More people with your device will look there than in the Assist forum. Name the post something like [SOLVED] RAMOS Bootloop Problem
jd1639 said:
I'm glad you got it working. You should post your solution here, http://forum.xda-developers.com/general/general More people with your device will look there than in the Assist forum. Name the post something like [SOLVED] RAMOS Bootloop Problem
Click to expand...
Click to collapse
Well thank you then for the link. Gotta go there!
Thread closed.
Good day, this would be a pretty lengthy post. I'd like to describe my experience clearly since I don't know what I possibly skipped over as I am very positive that my efforts have been correct basing on prior XDA forums. I even made this account solely for posting this to ask for help formally along with archiving this problem I'm having for those having a similar experience.
I've been working on my mom's phone this whole day and there are fruits of my current hard work. I am immensely stressed and despairing with my situation.
The Problems
Infinite boot looping
Can't access the recovery menu (power, volume+, even with home button)
Can access the ODIN / Download menu
Can't turn off either (holding down power button has no effect)
What I've done so far
I read XDA forums about similar experiences. Can't really access the recovery menu so I've factory reset.
We live in the Philippines and this phone is open line, so I went with those requirements while searching stock ROMs.
I downloaded the stock ROMs of the phone model via galaxyfirmware.com which was positively shared in the forums.
Did trial and error with it and eventually got the right one. I have formed a level of understanding with the filenames and eventually knew which is compatible.
Used Odin3 to Flash the BL, AP, CP, CSC, and even go Nand Erase and got the PIT file inside the CSC (Opened it using winrar)
The flashing is actually successful and quite fast to be honest.
The phone reboots itself and shows that it is still sadly boot looping.
Also, despite the several files used for the Flash, still can't access the Recovery Menu.
With that said, I have also tried using Frija which automatically downloaded the stock ROMs based on the model name and CSC type. Placed it in ODIN again and no changes, still boot looping.
I also can't put the TWRP I got here because of the FRP Lock, which can be undone via the settings of the phone. But since it's boot looping, I can't really do much about installing a custom ROM.
Currently, my dad is letting the phone drain its battery, since we can't really turn it off. The phone model doesn't have easily detachable battery as well, unlike the old days.
For some additional notes of what happened prior to this incident
My mom was just playing with her phone as her usual days went on. That day, she installed a new hotel-themed game she saw on Google Play. As I assume that it's from the app itself and not on some shady apk website, I saw no problem with it and didn't think it was the cause of all this. I went with the theory anyway and with the flashing, using CSC instead of HOME_CSC (which apparently saves the existing data on the phone from wiping), and even used the Nand Erase in the end. It's still stuck at boot looping.
I would appreciate anyone's reply to this discussion. I am truly desperate to fix this for my mom. If worse comes to it, I'll save money to buy her a brand-new phone.
You don't have a working android, so you won't remove the RFP. TWRP will not help you with this.
The symptoms you describe indicate a defective power button.
You manage to enter download mode because the power button is constantly on.
Because of the constantly on power button, you have no way to turn off the phone. Bootloop can also be the result of a constantly on power button.
To sum up, you should fix the power button.
1. The easiest way is to blow with compressed air and press the edge of the button with your fingernail, rapidly releasing the pressure. Perhaps the fuzz has blocked the button. Unfortunately, this rarely works.
2. Take the phone to a local service center.
Hi ze7zez! Me and my dad greatly appreciates your insight and we were definitely enlightened on this angle.
We didn't really think that the power button was stucked pressed on because you can clicking sounds when you press on it. The phone never had problems with the buttons along the 6 years it accompanied us, perhaps its age does start to show.
We're going to look into it tomorrow. Thank you very much! You gave us the idea that it may be shorted inside or some sort. Thank you again!
A bit of update.
I pried open only the back case of the phone so I can see and clean up the power button. I used tools specifically for it and made no damage on the phone during the process.
We couldn't really see anything busted from there. The buttons on the circuit still do the neat clicking sounds on it. Battery still looks the same.
Testing out the theory that the power button was stuck on:
We tried to only press and hold the volume down and power button. It didn't go to the download menu. We needed to press down all three together to access it. It is confusing since we believe it would be a power button issue too, as the phone instantly turns on by itself when plugged to a power source (it's completely drained by now and we still can't turn it off manually)
Perhaps it's an internal circuit problem with the power button? It's confusing with the fact we still have to press on it to access the ODIN menu if it was like "on" the entire time it's looping.
Thank you in advance for further insights.
Try restarting by pressing home, power and volume up all at once.
Hi Pranav2406,
I have tried that as well in order to access the Recovery menu to factory reset, but no luck.
We have given up on repairing the phone and went out yesterday to buy a new one in a rush.
We will still send this broken phone to a repairman.
If he fixes it, I'd ask what he did on it so I can post an update on this problem as well.
It's better to let the expert troubleshoot it.
I do suspect the problem in the phone's hardware. I'm pretty confident with all the stock ROM flashing I've done so it's not a software problem.
Thank again for everyone's insights.
Perhaps this case is too much for an amateur to fix.