Related
Hi All
I have a XDA11 i also have one of the original Nokia Cark 112 bluetooth car kits, but i cant use it with my XDA 11, i can search for it, it comes up as "carkit" i enter the nokia passkey and all seems fine, but it dose not work, ( it wont connect),
As we are a phone shop i then tried the controll box from whats labbled as a "nokia Cark 112 SE" i did the same set up this time the XDA 11 found "cark 112" and i paired using its paring code.
But still the same it dose not connect, When you first enter the paring code the blustooth kit status light flashes 3 or 4 times as if its trying to connect but never dose.
I knoe Nokia hase a so called new Bluetooth car kit "CW1" or something like that, its a few £s cheaper than the Cark 112, the spec is the same.
has anyone got any bluetooth car kits or headsets to work with tere XDA 11, if so please let me know what models they were
Carkits
applecom:
WM2003 does not have the handsfree profile for bluetooth (yet), so carkits won't work.
Headsets work fine.
oh is it not the same as "headset" because when connecting ericsson bluetooth or nokia 6310 phones you connect under "headset"
the car kit may not work, but at least i have been able to do this post from my xda over wireless lan with my sandisk SD WIFI Card.
i will try a nokia headset monday, but anyway thank you for the info on bluetoot profiles
thanks john....
I have tested XDA II working well with Parrot CK-3000
Hi - I have two phones (XDAII & Nokia 610a) & a bluetrek G2 bluetooth headset. Both will pair individually with headset - but I cannot get the headset to switch between the 2 without turning one off. Indeed it seems that for whatever reason the Nokia takes priorty - i.e when the Nokia can see it the XDA doesn't?? Has anybody had a similar problem (& ideally found a fix?)
:?
If I recall correctly the Bluetrek G2 can be paired with two bluetooth phones. But the order in which they are paired is important. Because Bluetrek assign them a primary and ... status (read the manual).
In this case the primay will be mounted allways as first at avail of the primary paired device.
So it makes sense that you'eve to turn off the primary device to make a connection to the other one.
Regards,
Mark
I've noticed these similar (and likely related) bugs in a lot of places and have been living with them for six months, but I have never seen a fix. Surely there are others with this issue that might be able to fix it.
Issue #1: When you connect a Bluetooth stereo headset to a Windows Mobile device, using the Wireless Stereo AND Hands Free profiles, the wireless stereo feature works fine, but when attempting to answer a call, hands free fails. The hands free icon shows on the Phone screen, no audio is heard, and after a few seconds the headset shuts off and the icon goes away.
Issue #2: When you connect a Bluetooth stereo headset to a Windows Mobile device using the Wireless Stereo profile and are watching video in Windows Media Player, if a call comes in, the program device.exe crashes and Windows Media Player will often need to be restarted. Device.exe will often crash at other times as well.
I have seen numerous reports of this problem, and near universal reports of it on the Dell BH200 Bluetooth Stereo Headphones. It seems to require A2DP, and be very common among HTC devices. I have had the same problem on the AT&T Tilt (Kaiser) and AT&T Fuze (Touch Pro/Rafael) under Windows Mobile 6. I can confirm the headset works as it is supposed to on Palm OS (Palm Centro) in headset mode, and that it was also able to work as a headset on the T-Mobile MDA (Wizard) running Windows Mobile 5 (which does not support A2DP).
In all cases, I am talking about devices using stock ROMs.
If you have seen the problem, please list the device, OS, and bluetooth device used. If you have a bluetooth stereo headset that does not exhibit the issue on devices that are known to have this problem, list that as well, so owners of devices with this issue can consider alternative headsets.
If you have any technical knowledge of what causes the issue, please share it. If you have heard of any workarounds, please share it.
Thank you all.
I have the Samsung i-640 running WM6 and have the same issue with The Dell BH200 not doin Hands free mode and the whole shut down of device happens too ..very Frustrating .
I tried using the Nokia BH 100 which does only Mono [Hands Free] and i get $hit loads of static noise but the Device doesnt Shutdown.
Heya, I have the AT&T Fuze and I also own the BH200. I have the same exact issue you have (issue #1). I have no idea why it does this but I've been trying to get support from dell for the longest time with no luck.
I think the problem lies in the MS BT stack. It does an automatic pin guessing thing which might cause the bh200 to not work properly. I have tested the fuze on the BT2020 (by Jabra) and it works perfectly. I just recently bought the moto s9 (still waiting for it to arrive) but I would prefer to use the dell bh200 if possible.
Check my sig for the information you're looking for.
Dell sends you to PC support when you try to get support on the device, since it's usually sold as an accessory with computers, but they refuse to offer actual support on the actual device, as though they knew nothing about it or how it works. I asked them if it was a rebranded version of another company's headset, and they wouldn't say.
I tried to get help from dell already, and they're as much help with it as telemarketers...
Similar problem
Maybe this is a stereo headset bug...
Maybe this is designed behavior, but it is typical of why people HAVE to hack the crap out of WM to be happy with it:
I have a ATT Tilt.
Behavior same under WM6 and WM6.1
I have a Jabra BT610s (stereo headphone with A2DP, AVRCP, handsfree, & wireless stereo profiles).
If the Tilt is paired with both wireless stereo & hands-free, then even if Win Media is running or playing, the hands-free profile is selected when powering on the headphones. Then, the stupid ATT Bluetooth settings are so buried that it requires about 30 secs of sylus picking, poking, and prodding to get it set to wireless stereo.
Is there a way to set the Tilt to default to wireless stereo, is there a helper app for quick-switching this?
Also, there are not infrequent dropouts in audio over bluetooth, even with the phone setting on the desk 24" away from the headphones as I type this.
All the remote control features DO work with this setup, but unfortunately there's no remote control function for profile switching.
Thanks,
I am using a stock ROM and I don't have the above problems. I am using a motorolla hb820 headset. I also use an LG Style i headset, and no problems either. I use Core Player and it plays fine even after a call. I only use WMP to play music and my X7510 haven't froze yet while playing music when a call comes in.
Hi
I am using Lg KE590 but I am not using the device so I have not gone through the problem. Is it for all the handset ?
John
Don Joao Resort
I have several configurations with problems to report below:
1) HTC P3600i (WM6 stock ROM) + Dell BH200 => issue #1 (never try issue #2)
2) HTC P3600i (WM6 stock ROM) + Dopod HS01 clip-on BT stereo headset => All functions work fine, no problem switching between profiles
3) Dopod S300 (WM5 stock ROM) + Dell BH200 => stereo music & phone call works but music switch back to the phone after end of a call
4) Dopod S300 (WM5 stock ROM) + Dopod HS01 clip-on BT stereo headset => All functions work fine, no problem switching between profiles
5) Nokia 5610 Xpress Music + Dell BH200 => All functions work fine, no problem switching between profiles
6) Nokia 5610 Xpress Music + Dopod HS01 clip-on BT stereo headset => All functions work fine, no problem switching between profiles
Summary: I tend to believe that the problem is specific to Dell BH200 and some of HTC's or WM OS combination as Dell BH200 works fine with Nokia phones and Dopod BT headphones always work with any phones we have.
Reporting in, Im using Motorola S305 Stereo BT. No above issues whatsoever with 2 devices HTC Kaiser and Touch Pro. Both with stock or cooked ROM. I have a strong feeling its related to hardware prob on Dell BH200.
I have a touch pro that refuse to play nice with my AVIC-D3 head unit...I must pick either headset profile or wireless stereo profile, but not both. I remember coming across a solution called a2dptoggle. It let you switch between the 2 easily (in wm agenda page), but try it out to see if that's a solution or not.
Issue #1 using HTC Touch Pro and Dell BH200
Because of that issue i can't use the hands free function at all.
Only way i can use my headset is:
If i uncheck Hands free from partnership settings, then an incoming call mutes headset, i take out the phone have my conversation manually, after hangup the music plays on.
Hi to all
Before I had nokia n97 and a sony DR-BT50 Bluetooth headphone which could connect to n97 and my laptop so easy.
after I buy samsung galaxy s I tried to connect the headphone but no way. the phone can not discover the bluetooth headphone
Before i was on Eclair and try it but could not, after I update to Froyo I had hope to make it work but the problem persists.
here are the bluetooth headphone specifications:
Bluetooth® Technology : Bluetooth Version 2.0
Diaphragm : PET
Function : A2DP, AVRCP, HFP (1.0), HSP (Ver. 1.1, Vol. 2, Part K:6)
Interface : A2DP, AVRCP, HFP, HSP
I was wondering if this is a hardware matter or could connect phone to Bt headset by applying some update.
Anyone have any idea?
Hello! I have dr-bt50 and shw-m110s (korean galaxy). Before froyo i was able to pair devices and translate media to headset. No luck with voice calls though. After froyo pairing is successful too. But when i turn headset off, android forgets about a2dp profile associated with dr-bt50. So i have to unpair device, then pair it again EVERY TIME i want to listen to music or watch a video using headset. This is really sick.
Pyromaniac84 said:
Hello! I have dr-bt50 and shw-m110s (korean galaxy). Before froyo i was able to pair devices and translate media to headset. No luck with voice calls though. After froyo pairing is successful too. But when i turn headset off, android forgets about a2dp profile associated with dr-bt50. So i have to unpair device, then pair it again EVERY TIME i want to listen to music or watch a video using headset. This is really sick.
Click to expand...
Click to collapse
what is the difference between korean galaxy and other galaxies? why that one can discover DR-BT50 but mine can not?
Glitch in de music
Hi i can connect to the DR-BT50 without a problem.
but when i play music the music glitches like the connection isn't fast enough,
or the buffer is to small.
can anyone help??
i'm running:
Galaxy S: GT-I9000
android: 2.2.1
smalband: I9000XXJPY
Kernel: 2.6.32.9
Build: FROYO.XWJS5
rooted: Rage against the Cage
lagfix: oclf 2.0
Thanx
Edit: solved
installed the new xwjs5 rom and problem is fixed
mw600 a2dp devices
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
Samsung Glaxy S still running eclair and no problems connecting to SE MW600. Picks it up everytime. Are you following the instructions clearly?
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
I have a MW600 with SGS I9000, I never had any problems (Eclair included).
I'm currently on Froyo 2.2.1 XWJS5. But I have installed all leaked ROMs with no issues too.
I hope to help you.
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
Hi, MW600 works well on my SGS since Éclair. Are you pairing it correctly?
here are the instructions from the user guide:
Pairing the headset with another device
1)Make sure the headset is turned off.
2)Turn on the Bluetooth function in the other device
3)Place the other device within 20 cm (8 inches) of the headset.
4)Press and hold down the power on the headset for about 5 seconds until the pairing indicator appears on the display.
5)In the other device: Search for and add a new device.
6)If a passcode is required, enter 0000.
To reset your MW600
1)Make sure the headset is turned off.
2)Press and hold down the power until the pairing indication appears.
3)Simultaneously press and hold down power & call until the headset turns off.
DaRkMyk said:
Hi, MW600 works well on my SGS since Éclair. Are you pairing it correctly?
here are the instructions from the user guide:
Pairing the headset with another device
1)Make sure the headset is turned off.
2)Turn on the Bluetooth function in the other device
3)Place the other device within 20 cm (8 inches) of the headset.
4)Press and hold down the power on the headset for about 5 seconds until the pairing indicator appears on the display.
5)In the other device: Search for and add a new device.
6)If a passcode is required, enter 0000.
To reset your MW600
1)Make sure the headset is turned off.
2)Press and hold down the power until the pairing indication appears.
3)Simultaneously press and hold down power & call until the headset turns off.
Click to expand...
Click to collapse
Hey, do your mw600 fully functional?, i mean the play/pause button, next/previous song, vol button....
I tried on the store, the only working button is the accept call only, i can hear the songs perfectly...but none of the button function
Sent from my GT-I9000 using XDA App
val5 said:
Hey, do your mw600 fully functional?, i mean the play/pause button, next/previous song, vol button....
I tried on the store, the only working button is the accept call only, i can hear the songs perfectly...but none of the button function
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yes, all of the buttons and touch sensitive volume works. Did you try to reset the MW600?
MW600 can pair with 3 devices, maybe during the time that you tested it, your SGS was set as the "calling device" coz usually the first one if it is a phone or mp3 player will be set as the "music source".
You can either reset or manually set your SGS as the "music source" by long pressing the play button and selecting your SGS.
DaRkMyk said:
Yes, all of the buttons and touch sensitive volume works. Did you try to reset the MW600?
MW600 can pair with 3 devices, maybe during the time that you tested it, your SGS was set as the "calling device" coz usually the first one if it is a phone or mp3 player will be set as the "music source".
You can either reset or manually set your SGS as the "music source" by long pressing the play button and selecting your SGS.
Click to expand...
Click to collapse
Thx
Problem solved by uninstalling 3trd party music player, must using the default player...
Oh yeah, is it safe to charge with the galaxy s charger ?
Sent from my GT-I9000 using XDA App
You don't have to reset the MW600 just to pair with another devise, you just need to power off and long press the power, I posted this, 3 posts above.
I tested this with PowerAMP music player and all the controls work.
I've charged mine using SGS charger and USB but I can't say if it's safe, I'm no expert in that.
I Swyped this on my Galaxy S
It seems that the headset sony DR-BT50 is working on XWJS5 rom but not working on the others such as JVP/JVQ, anyone knows which files are involved for bluetooth so port them from JS5 to JVQ ?
taha_e said:
It seems that the headset sony DR-BT50 is working on XWJS5 rom but not working on the others such as JVP/JVQ, anyone knows which files are involved for bluetooth so port them from JS5 to JVQ ?
Click to expand...
Click to collapse
Strange it works on the fly with my set...
It must be something els..
Maybe use a different modem I use the jvo modem
Sent from my GT-I9000 using Tapatalk
Hello,
it's my first post and I have no idea where to post a question like this, but here goes:
I have just acquired an iPod nano 7G with bluetooth source capabilities (connect to bluetooth headsets to play music through them etc.)
My problem is, I have a set of good speakers in another room and I'd like to play music from them wirelessly while the iPod is charging on the dock. Also, I'd like to use the android device as a portable bluetooth speaker when out on camping trips...
I have a Note II (rooted) which I want to use as the sink. I am aware that the Note II can be used as an A2DP sink, but I am unable to find any apps that enable this functionality. Has anyone tried to do this and can perhaps guide me through doing this?
So to recap: iPod --> Note II --> Speakers. Note II needs A2DP sink functionality and everything should be fine.
Thanks in advance!