Related
i originally had faria's wm6 on my phone, but then i wanted to try xplore core 2.0. i flashed it, but when it finished it would start. it wouldnt go past the second splash screen. i tried a hard reset using the hard keys, but when i try it, it says format failed. i have tried to reflash using bootloader using the OEM carrier roms from both t-mobile and cingular. i am having the same issue no matter what i do. if there is anything i can do to fix this.. please help me because i constantly use my wizard and i don't no what i can do without it. i really appreciate any input. thanks
im not sure what to do but i figured i'd respond just so you know people are trying to help. I've heard of the format failed problem, but im not sure what the solution was. Good luck!
What device do you have ? A G3 ?
How I fixed my Format failed problem...
This is a quote from thread
http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
I followed these steps with an SD card fresh from the package...
Drug_Store said:
...
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
Click to expand...
Click to collapse
thanks guys... im going to try that.. and just so all of you know, its a g3
thanks everyone who helped me out. my wizard is working perfectly again. i appreciate all the help
wow that's awsome
idd, mtty is last chance weapon.
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
yes, i edited it.
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
You sound like Faria...LOL!
Really, that's why I put what I did in my thread about saying "My phone is stuck in bootloader..." (remember the fillet knife?) ROM's DO NOT MESS UP A PHONE UNLESS THEY ARE CID LOCKED, THE FLASHING PC HAS ISSUES, OR BECAUSE OF OTHER OPERATOR ERRORS.
Don't let it get you down. You're doing a good work and if one or two people out of a thousand can't get it right, then they need to be running carrier ROMs, and you can stay calm and happy helping those who really need it.
See, that's not so bad now is it?
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
jawnsixteen said:
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
Click to expand...
Click to collapse
Nope, flash went to 100% then the phone tried to reboot and nothing happened.
I do all my flashing on that machine because it's stable and I have never had a problem flashing until the Core 2.0 rom. That is the first and only rom I have had any trouble with.
golfernutnflorida said:
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
Click to expand...
Click to collapse
OMG, he used a naughty word.
Like you don't hear it daily?
Get real.
GldRush98 said:
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
Click to expand...
Click to collapse
I do my rom as I please, you can't question that.
For YOU to know all roms have 3 (boot =NOT) splash screens You're just too SMARTass to notice.
You can quote multiple post in same message, in case that slipped your soo full-of-knowledge mind.
I used old WM6 build ? Please explain to me what you mean ...i am not that wize
I did not called my rom STOCK ! I called it Core . But you are probably too smart to actually even read anything.
In case you don't understand the word "CUSTOM", then let me explain it to you : I can change whatever i want in it. All of it if I like to.
Ah yeah, and i almoust forgot ... please read this
http://forum.xda-developers.com/showpost.php?p=1241040&postcount=1
It's been there from day 1, just made it bigger now, so that you can see too
And next time, keep your opinions to yourself. No need for public -> "Ooh, look at me how tough I am ! " stunts.
....
whether you like it or not...
I'm confused by people who choose to post cooked ROMs in a public forum, invite people to use and comment, but them complain if the feedback it not all roses and accolades.
You may have done this for free, and many if not most, appreciate your time and effort. That being said, some have legitimate complaints and are posting them because they have experienced problems with your ROM. I’ve been reading your reaction to any negative feedback and you are highly defensive, never conceding that there may be issues to address.
All cooks say that you are not responsible if the ROM bricks someone’s device or if they have problems, and no one has asked for you to pay for their repairs or replace their devices.
There is no place for foul language or insults in such a forum. It's childish and may simply help support the complainant’s point.
If this is your reaction to complaints, then yes do us all a favor and stop posting and keep your work for your personal enjoyment and benefit.
If you can't stand the heat, then get out of the kitchen. No pun intended.
Well if it doesn't work for you then try a different ROM. I tried all the ROMs and pretty much gonna stay with Faria The Real Thing
I tried Xplore 1.0 and i had alot of troube so I dont think im gonna try 2.0. If it works dont change
Funny thing is I have flashed this ROM to my wizard 6 times, and each time something else didn't work. But let me explain...
I want a stripped version of windows, I don't do any messaging at all. And since the Explorer ROMS are known for their stability, it seemed a logical choice. So I have been using package tools, to create packages with option.XML files for each package so you can choose, what parts of the OS get installed.
But back to the point...
Each time I flashed something went wrong... Something I did, a "tmail not found warning when activesync starts", to once I got a 260(?) error once when flashing at 63% so I started it while holding the voice command button. It booted into Bootloader, I flashed it to Cingular 2.25.11 and immediately flashed back to the same ROM successfully.
There are hundreds of people Ecstatic with the Xplorer ROMs, for each one of you here complaining. I for one would think it a travesty, for a few unappreciative people to ruin it for hundreds of others. By pissing off one of our cookers. Maybe had you posted your problems here we would have been able to help you.
But please don't be so accusing, just read, and if you can't find an answer. Then ask nicely, and thank the cook for the time he spends cooking for us! If you don't like the answer you get or you decide you don't like this ROM try one of the many others...
Hello, I have an Axim X51v that I bought off someone who didn't want to deal with it anymore. Anyway when you turn it on it hangs at the dell logo or sometimes at the windows start up logo, rarely it makes it into windows but it freezes up after a little while. I've tried flashing several different roms on it (so did the previous owner) but each time it's the same result. I've checked diagnostics mode (record+power+reset) and everything seems to check out (flash has a green zero) and every time I flash a rom it makes it through without any problems. Also the bootloader is a10_g3 is this version known to be unstable? Could it be flashed wrong? That's the only thing I can really think of.
You know this forum is for HTC devices?
Im not familiar with Dell PDA's but i cant imagine flashing roms willy nilly will work on a dell which are designed for HTC devices. Give me a link for the ROM which you are currently trying to use.
Have you tried flashing original rom back on, thats wm5 yes?
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
We don't frown upon answering questions for other devices. This forum is meant to help people. If you can get your answer here.. cheers on that.. hope you will.
mbannick said:
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
Click to expand...
Click to collapse
sorry wasnt meaning to sound sarcastic, ive had some experience of axim but mostly wm5, just wasnt too clear on ur issues, what exactly happens? you say it freezes but what do you do that makes it so?
Well that's the thing it freezes randomly, even just sitting there it will freeze. I want to say its the flash but every time I check it the test comes out clear. So the the only thing I can think of is the bootloader is messed up.
Ive just been to the dell support site and wow, alot of un happy people, i can see why your friend didnt want it anymore...
After doing some reading there i can only suggest you download their official rom and rom updates and see if you can get it running normally. What i dont understand is flashing a new rom should clear everything, i dont think it is the bootloader if the system boots up fully correctly, it has to be a rom issue (or hardware of course).
check out these sites, doesnt make good reading im afraid :
http://search.euro.dell.com/results...~srd=False&ipsys=False&advsrch=False&~ck=anav
http://en.community.dell.com/forums/3530.aspx?PageIndex=2
good luck and let me know how you get on.
Well as I said it takes several tries to get into windows (sometimes it wont work at all until I leave it without the battery for an hour or so) so its not booting up normally at all . Anyway I had the wm5 a12 rom on there for a while but it still has the same problems (I used sd flash since I really cant sync and flash with the way it freezes). So yeah I'm not sure what I can do
mmm.....
If youve had several different roms on it, including official ones, it could mean a hardware problem too.......
Im no chef, but i would have expected a bootloader issue to be resolved with a known working official rom?
How old is the Dell? Just a thought, have you tried the online help with a technical rep from Dell, they were good when trying to sort out an issue with my 4 year old laptop? Sorry but im running out of ideas........
Hey I think I got it! Seems the previous owner modified the battery latch. After messing around a bit I stuck a toothpick on the "button" that is depressed when the door is closed and it seems to be running perfectly stable! I even did a few resets and each time it boots just fine. Thanks to everyone who replied and offered advice.
hoorah! saved by a tooth pick, now ive heard it all haha. congrats!
OK so im new here and new to downloading roms and things like that. So i Beleive i downloaded Android 2.2 NAND or something.(Please for give my lack of Tech Knowledge) But anyway i love it and everything but there are some things i noticed after i got it.
Some calls become distored(sound wise)
I can no longer connect to 3G or H...(Which means no internet!! unless with WiFi)
My Phone mounts as a disk drive so im not able to try and flash it! It cant detect the phone or something.
So because of this i was wondering if there was anyway to remove android and go back to My HTC LEO! Or a way to remove so i can re-install it??? I really dont want to have to buy a new phone!
Sorry if this was posted already. . . but i could not find a answer that helps.
PLEASE HELP !!!
So I lent my brother my nexus s that had cm7 on it. He got into the clockworkmod, went to mounts/storage, and proceeded to format everything (bootloader, boot data, etc. everything in there) he said he thought that would fix the force closes, I figured no biggie, but now I can't even get the phone into download mode and I have no idea what to do, the phone will simply not turn on
wow.... dont even know why he would do that.
rule 1: dont lend people your phone.
and i dont know why you would try and get into download mode, Odin isn't the first thing you want to go to.
1. turn the phone off (if it isnt already)
2. hold volume up + power
... what happens? does bootloader mode pop up?
- plug your phone in your computer's USB
- does the sound for USB plugged in occur?
- does computer detect it?
Can't access fastboot.
Phone sometimes recognizes it and says this device is not recognized and it couldn't install the usb driver, sometimes when i plug it in it does nothing.
Didn't want to lend it to him, had no choice. I told him he should have just fixed the permissions on the phone, but then again he's not exactly android literate.
thats just dumb on his part.. i dont know why he would try and mess with your device. if it has problems, just ask you first.
its probably bricked if you cant access download or bootloader... definitely bricked if the computer is unable to detect it
your only way out of it is to get a replacement
In Device/Drivers of windows under Unspecified there's this:
SEC S5PC110 Test/BD
says drivers are not installed
Anybody out there with a solution?
I think there is more than one driver you can try, though I've never flashed anything in Windows (Linux already comes with the driver ), so I don't know for sure. I think I've seen people mentioned a few drivers before, try search for all the "brick" threads here.
Easiest solution might be to download a Linux live distribution (f.e. ubuntu) and run fastboot from there. No need to install any drivers.
Kicking him in the nuts will probably make you feel better... I don't know if it'll fix your phone though.
jruweaver said:
Kicking him in the nuts will probably make you feel better... I don't know if it'll fix your phone though.
Click to expand...
Click to collapse
lmao!!!!!!!!!!
KryPTiCk0d3 said:
lmao!!!!!!!!!!
Click to expand...
Click to collapse
While funny, it doesn't help one bit.
I would try the various methods to get into download mode and use Odin to fix it ...you might be screwed tho
Sent from my Nexus S using XDA App
SphericalPuma said:
While funny, it doesn't help one bit.
Click to expand...
Click to collapse
Unfortunately with the state your phone is in it is probably going to be the best advice you get.
Sent from my Nexus S using XDA App
http://forum.xda-developers.com/showthread.php?t=1000175
any chance that this could help you?
Ddi you ever get your phone sorted ? I'm now in the same situation !
Yes, hit up http://www.mobiletechvideos.com/blog/?page_id=970 For 50 bucks they'll fix your phone and ship it back to you in no time. They got my phone on a Friday, I got it back on either Monday or Tuesday. Of course they're based in Texas and I'm in STL so it could differ for you, but the point is, they're fast, reliable, and professional.
Thanks for that - I'm based in Ireland but I'll give them a shout and see if we can do business......
Thanks a million for the reference PUMA. Please contact me when you are in need of a brick fix. I fix hundreds of Galaxy S / Samsung / HTC variants and several others in a brick of nearly any scenario. I've devoted a lot of time to providing and almost unseen service to people in need versus parting the phone out or trashing it.
I'm not new to android whatsoever.. I've just returned from an Iphone 4s cause i was missing the openess of android. Now.. i've pulled out my old Nexus S 4g, Updated it to 4.0.4 and i cant get it to connect to my computer for the life of me! tried 4 different cables, 5 different computers, every driver i could find and nothing. I've come to believe this is a software failure... All i need is root and i will be able to sleep at night. Could someone package up .zip to give root and twrp recovery that i could flash through stock recovery? I dont know else i could do to get root... but this problem is becoming quite annoying.
1. There is no way to package a zip to flash through stock recovery since it would have to be signed.
2.For someone who is "not new to android whatsoever" making 2 threads about the same topic 2 minutes apart isn't exactly acting the part.
Try this guide.
Actually you're wrong, On the Epic 4G someone did in fact manage to do so. And yeah since i'm not new to these forums i understand that stuff like this gets overlooked so i made two posts. Cry me a river.
BTW Thanks harb... but that would involve being able to connect to my PC. Which just is not possible right now.
Thats the Android Karma... it happens but a little advice.
If you can't connect to the computer then it might a hardware issue not software.
If getting root was that easy that you just had to flash a zip on stock then everyone would be doing it. And good luck getting root without unlocking your bootloader first. Not to be rude but the problem could possibly be between the computer and the chair.
robogoflow said:
Thats the Android Karma... it happens but a little advice.
If you can't connect to the computer then it might a hardware issue not software.
If getting root was that easy that you just had to flash a zip on stock then everyone would be doing it. And good luck getting root without unlocking your bootloader first. Not to be rude but the problem could possibly be between the computer and the chair.
Click to expand...
Click to collapse
It's ok, not rude. I understand what you are saying... but did you not read what i just said? somebody had accomplished this on the Epic 4G and i'm just trying to find someone who has done it with the NS4G.. I've had 4 Android devices, rooted them all and been here since the beginning. It's not a hardware problem, it connected fine before when it was on gingerbread... i downloaded the OTA ICS then flashed through stock recovery.. but if you read what i said in the first post this problem only occured AFTER updating. This is why i quit using XDA a long time ago, because people just post a bunch of useless information instead of trying to help... The problem is not me my friend, its the damned ICS update, i've read multiple posts all over the interweb w/ people who have had the same problem, yet no resolutions other than bending up the micro usb male piece on my phone which is not the problem as i said it was working fine before i updated. Have tried multiple samsung drivers, pda net, and Android SDK Drivers, multiple Cords from samsung, to htc, to blackberry and palm pre and even a nokia one now. and 5 different computers... so tell me smart guy, what would you do?
grumpySasquatch said:
It's ok, not rude. I understand what you are saying... but did you not read what i just said? somebody had accomplished this on the Epic 4G and i'm just trying to find someone who has done it with the NS4G.. I've had 4 Android devices, rooted them all and been here since the beginning. It's not a hardware problem, it connected fine before when it was on gingerbread... i downloaded the OTA ICS then flashed through stock recovery.. but if you read what i said in the first post this problem only occured AFTER updating. This is why i quit using XDA a long time ago, because people just post a bunch of useless information instead of trying to help... The problem is not me my friend, its the damned ICS update, i've read multiple posts all over the interweb w/ people who have had the same problem, yet no resolutions other than bending up the micro usb male piece on my phone which is not the problem as i said it was working fine before i updated. Have tried multiple samsung drivers, pda net, and Android SDK Drivers, multiple Cords from samsung, to htc, to blackberry and palm pre and even a nokia one now. and 5 different computers... so tell me smart guy, what would you do?
Click to expand...
Click to collapse
Bro... Chill... They're just trying to help you out. There is NO way to to root your NS without a computer (currently. We are not Epic 4G owners here). You said you didn't use your NS since GB, SO during the time in between something could have happened to the hardware. Don't rule that out just yet. Your drivers might also be bad. Is this what migrating to iOS does to people? Makes them snobby and demand fixes to problems they can't figure out on their own? Don't hate on the XDA forums. If we're not helping you "hit the thanks button anyways, you ungrateful bastard" (XDA into video ). Anywho. Chill. Keep trying.
Nexus S (GSM i9020a)
Paranoid (14.a Hybrid - 4.0.4)
Matrix Kernel (CFS - 20.0)
Intellidemmand (800/100)
Live OC (105 - 800/1000)
Deep Idle (On - Noop)
BLX - 96 (Inverted Apps)
I am chill, i am just trying to describe what I've already done so maybe someone could suggest something else. And no what i meant is i downloaded the OTA on my computer than transferred it onto my Nexus through USB mount a couple of days ago so i know its not a hardware issue. Im not demanding fixes, just trying to see if anyone has done been able to figure this out yet as i know im not the only one with this issue. And there is a big problem w/ people on the XDA forums as a whole.. i am a little frustrated and just dont like when someone is telling me is a User issue when i have tried everything conceivable and know what i am doing.. Sorry if this offended you. and IOS is a good device.. its just like.. NWO they want to control everything haha. I'd rather be part of the rebel faction. even though i love my ipad XD
There is currently no way to root 4.0.4 without an unlocked bootloader (and no custom recovery), and the only way to get an unlocked bootloader is to either have root or plug it into the PC and unlock via fastboot. As such, you are stuck with sorting out drivers - despite how annoying they are.
The video i linked to above describes in detail (and through video) exactly how to sort out NS drivers on Windows machines as well as the required fastboot commands to get a custom recovery.
Harbb said:
The video i linked to above describes in detail (and through video) exactly how to sort out NS drivers on Windows machines as well as the required fastboot commands to get a custom recovery.
Click to expand...
Click to collapse
Yes that is a good video, and does a job well done in describing on how to install drivers. My main issue is that my Computer(s) are'nt recognized my device at all... It doesn't show up as android device, or nexus s... but Unknown device. If i could figure this out i believe i could handle the rest.
grumpySasquatch said:
Yes that is a good video, and does a job well done in describing on how to install drivers. My main issue is that my Computer(s) are'nt recognized my device at all... It doesn't show up as android device, or nexus s... but Unknown device. If i could figure this out i believe i could handle the rest.
Click to expand...
Click to collapse
Pretty sure that video describes that. You need to open up device manager, double click unknown device (while device is in fastboot), hit update driver and navigate to the provided drivers on the site. Watch it a few times, you'll figure it out.
Have you tried to install PDANet? I've read numerous times about it working wonders for users who have trouble with drivers. It has all of the necessary drivers built in.
Sent from my Nexus S using xda premium
d_phekt said:
Have you tried to install PDANet? I've read numerous times about it working wonders for users who have trouble with drivers. It has all of the necessary drivers built in.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
yes i second that,PDANet Drivers usually work across all devices you should try them.
Like ppl said before, try PdaNet drivers it might help.
thanks everyone, , but like i said i tried pretty much every driver you can find online. they will not install as my device comes up as "Unknown", i've literally tried every piece of literature on the web relating to this issue... at this point i'm just going to wait for the JB update and see what happens.
grumpySasquatch said:
It's ok, not rude. I understand what you are saying... but did you not read what i just said? somebody had accomplished this on the Epic 4G and i'm just trying to find someone who has done it with the NS4G.. I've had 4 Android devices, rooted them all and been here since the beginning. It's not a hardware problem, it connected fine before when it was on gingerbread... i downloaded the OTA ICS then flashed through stock recovery.. but if you read what i said in the first post this problem only occured AFTER updating. This is why i quit using XDA a long time ago, because people just post a bunch of useless information instead of trying to help... The problem is not me my friend, its the damned ICS update, i've read multiple posts all over the interweb w/ people who have had the same problem, yet no resolutions other than bending up the micro usb male piece on my phone which is not the problem as i said it was working fine before i updated. Have tried multiple samsung drivers, pda net, and Android SDK Drivers, multiple Cords from samsung, to htc, to blackberry and palm pre and even a nokia one now. and 5 different computers... so tell me smart guy, what would you do?
Click to expand...
Click to collapse
So the ICS update makes you unable to boot to fastboot and makes your device unable to be recognized by your computer from there?
That's a new one. As far as I know, "Unknown device" is actually your device being recognized, just the driver doesn't get installed correctly.
Have you tried manually specifying which driver to install and selecting the PDA Net driver? Look at Harbb's last post.
Have you went as far as editing the drivers inf to match your hardware ID? I know I had to do that way back when the PDA net drivers weren't even available.
'til then, user error.
polobunny said:
Have you tried manually specifying which driver to install and selecting the PDA Net driver? Look at Harbb's last post.
Have you went as far as editing the drivers inf to match your hardware ID? I know I had to do that way back when the PDA net drivers weren't even available.
'til then, user error.
Click to expand...
Click to collapse
I swear you people don't listen, look i did everything in the video exact when i try to manually specify the driver it comes back saying that the folder you specified doesn't contain a compatible driver for your device... I'm not an imbecile and know how to follow instructions on a video. I know most people skip research cause they're too lazy to figure it out themselves... i posted on here as a last resort and feel like people are telling me what i already know then telling me its my fault, ridiculous. if you guys are just going to repeat what the last five people have said instead of trying to offer a new soloution then why even bother posting?
Epic 4G could do this in FROYO... It was patched by google in 2.3+. Do you want an app to secretly root you and install malware?
Sent from my Samsung Epic 4G using Tapatalk 2
grumpySasquatch said:
I swear you people don't listen, look i did everything in the video exact when i try to manually specify the driver it comes back saying that the folder you specified doesn't contain a compatible driver for your device... I'm not an imbecile and know how to follow instructions on a video. I know most people skip research cause they're too lazy to figure it out themselves... i posted on here as a last resort and feel like people are telling me what i already know then telling me its my fault, ridiculous. if you guys are just going to repeat what the last five people have said instead of trying to offer a new soloution then why even bother posting?
Click to expand...
Click to collapse
Well it is going to be basically one of two things.
1. Is user error of some sort. That is what people have been trying to help with.
2. Is hardware issue that no one can help you with of course. Or some software issue causing it to not show up for who knows what reason. Neither of which folks can help with since a computer is not seeing it. So they revert back to what they can. Point 1
When you asked a question like is there a zip that you can flash in stock recovery to give you root or custom recovery that also doesn't help your cause for people assuming user error.
The one other thing you can try is download mode and Odin.
grumpySasquatch said:
I swear you people don't listen, look i did everything in the video exact when i try to manually specify the driver it comes back saying that the folder you specified doesn't contain a compatible driver for your device... I'm not an imbecile and know how to follow instructions on a video. I know most people skip research cause they're too lazy to figure it out themselves... i posted on here as a last resort and feel like people are telling me what i already know then telling me its my fault, ridiculous. if you guys are just going to repeat what the last five people have said instead of trying to offer a new soloution then why even bother posting?
Click to expand...
Click to collapse
Cool. Trash your Nexus S, clearly broken.
Edit: That's nice of you albundy, but Mr grumpySasquatch (fitting name eh?) has tried everything, including modding the drivers inf. His Nexus S is broken beyond repair, also the first one we've ever seen that won't adb but works fine for USB mounting. *chuckle*