Database Info

For extreme noobs like myself info reg rooting & clockwork recovery

About a day ago I didn't know anything about rooting and what it was but now I know to a degree from many hours of reading.
These are the steps I did.
You have to make sure that you choose the correct one click root method for the DI07 patch. Obviously you need to put the epic in debugging mode and click on the appropriate run.bat command and let the batch run. That part wasn't to hard for me, pretty much self explanatory.
Also to check for "root", to make sure your epic is rooted, download titanium backup from the android market and if it launches your epic is rooted and plus it will say root status "ok"..
The part I had issues with was with the one click clockwork recovery. Especially when people started talking about typing in commands in the dos prompt. I'm ok with doing that but it wasn't explained in full detail regarding what to do.
So first thing that I had to figure out was what they meant by c:/android-sdk-windows/tools and where was this located. I didn't have this file on my cpu on the c: drive and i was lost at this point being that I didn't know where to get it. I later found out and if im wrong please tell me you had to create your own folder on your c: drive so you can point to it from the c: prompt in dos. So I went ahead and did that.
In the tools folder from android-sdk-windows folder you would go ahead and place the contents of the clockwork recovery files in the tools folder. So wahla I now have a folder I can point to in the dos prompt. At this point I still didn't know if this is going to work or not but I felt like I was close.
Next step was to follow "open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code."
adb devices
adb shell
su
remount rw
exit
exit
first you need to type cd C:/android-sdk-windows/tools and press enter to point to that folder. And run subsequent commands from there.
If when you type in adb devices and a device does not pull up that means that the usb drivers are not installed properly for the epic phone and you need to look into that first.
After you run those commands now you can go ahead and run the run.bat file for the clock works recovery. But also make sure your still in debugging mode.
This might take a few tries but it will eventually work and if it does not work after trying to flash the recovery and the epic reboots pull the battery (reinstall battery) and then try to go into recovery by pressing the vol down--camera--and power button at the same time and you should see a green recovery screen.
I wish someone had typed something like this sooner so I wouldn't of had issues.
I hope this helps at-least one person.

Good idea except it's already been done :-\
http://forum.xda-developers.com/showthread.php?t=786305

Whosdaman said:
Good idea except it's already been done :-\
http://forum.xda-developers.com/showthread.php?t=786305
Click to expand...
Click to collapse
I know I was trying to follow that but there was parts missing that I didn't understand for ex. the part where I had to create the actual folder it never stated to create a folder but it wanted you to point to it in the dos prompt. And yes that tutorial did help out tremendously but i was still a little lost. My explanation fills in the missing gaps or parts. But thank you for pointing that out.

Maybe with noobnl latest version of the clockwork installer (version 32 with mount rw included in the script) you no longer need to go into adb?

jimmyz said:
Maybe with noobnl latest version of the clockwork installer (version 32 with mount rw included in the script) you no longer need to go into adb?
Click to expand...
Click to collapse
That is correct. Version 32 is truly one-click.

mattallica76 said:
That is correct. Version 32 is truly one-click.
Click to expand...
Click to collapse
Thats true

I'm not quite as noobish as the OP but I'm a complete noob to Android and -nix os's in general (besides a tiny bit of unix experience and a non-fear of command-line interfaces). Still, I have enough fear of the process to wait until Epic ROMs are a little further along and more refined to the degree that that's possible. If I weren't quite so noobish I'd dive right in.

[Q] help a noob with adb!!!

ok...so im getting my mesmerize today and i have no clue how to get into adb...i got the android sdk and cant find it anywhere...could someone help a noob plz....you can slap me after i get clockworkmod on my mesmerize

Firedog7881 said:
Somebody please correct me if I am wrong.
You do not NEED to have your phone connected to your computer any more as long as you have the right programs on your phone. If you use z4Mod to root your phone, download the application Superuser to give applications SU permissions, install ROM Manager, and then use Root Explorer to move the files into their necessary locations and then use Terminal Emulator to execute the commands.
I have rooted, installed ROM Manager, backed up my ROM, installed the kernel in this thread all without knowing what ADB is.
All applications are available in the Market
z4Mod
Superuser
ROM Manager
Root Explorer ($4)
Terminal Emulator
Click to expand...
Click to collapse
I dident use adb to get it working. Found it faster to use root explorer to place files and then change permissions of the files on system and SD.
Then use terminal to run the command
Sent from my SCH-I500 using XDA App

for people (like me) that aren't good with command prompt adb... you should check this out QtADB (GUI) Based ADB

elijahblake said:
for people (like me) that aren't good with command prompt adb... you should check this out QtADB (GUI) Based ADB
Click to expand...
Click to collapse
WOW, This is nice. Thanks for the link!
You get slap rights.

BakedTator said:
ok...so im getting my mesmerize today and i have no clue how to get into adb...i got the android sdk and cant find it anywhere...could someone help a noob plz....you can slap me after i get clockworkmod on my mesmerize
Click to expand...
Click to collapse
Why does this need another thread.. ?? You already have all the resources in the previous thread you made, which people actively responded to. Certainly you could post any follow up questions there..

dcow90 said:
Why does this need another thread.. ?? You already have all the resources in the previous thread you made, which people actively responded to. Certainly you could post any follow up questions there..
Click to expand...
Click to collapse
sorry bout that...i had info there and didnt get it working so i posted new with a lil more detail...next time i will correct it...again my bad
ok guys....your help made clockworkmod happen for my mesmerize...much thanks...not to the roms!!!

BakedTator said:
sorry bout that...i had info there and didnt get it working so i posted new with a lil more detail...next time i will correct it...again my bad
ok guys....your help made clockworkmod happen for my mesmerize...much thanks...not to the roms!!!
Click to expand...
Click to collapse
I'm not a moderator nor do I run things around here.. don't apologize to me. I was just curious b/c I thought it was kinda funny that you thought you needed two threads d=

1 of the topics was cause I didn't understand adb at all. This one was cause I couldn't find adb in the android sdk.but now I got it all worked out and things are running smooth with pick_n_pack, voodoo 5 and cwm and getting 1800 on quadrant now...all hail xda community!
Sent from my SCH-I500 using XDA App

Help for a total noob needed.

Hello everyone. It has been a year since i bought my Captivate and i just put my hands on this awesome device (Infuse 4G).
I feel a little retarded as i completely forgot who i donated to on this forum for helping me to unlock my captivate when there was no soft for it in the market yet. I would like to thank you again whoever it was.
Anyway, I would like to ask you to help me to get rid of At&T crapware and get a nice clean fast rom. I will also need instruction for a total retard. Flashing a phone is not an everyday business for me.
Thanks

4biddenskill said:
Hello everyone. It has been a year since i bought my Captivate and i just put my hands on this awesome device (Infuse 4G).
I feel a little retarded as i completely forgot who i donated to on this forum for helping me to unlock my captivate when there was no soft for it in the market yet. I would like to thank you again whoever it was.
Anyway, I would like to ask you to help me to get rid of At&T crapware and get a nice clean fast rom. I will also need instruction for a total retard. Flashing a phone is not an everyday business for me.
Thanks
Click to expand...
Click to collapse
Super One Click for root and Infused for ROM.
http://forum.xda-developers.com/showthread.php?t=1105413
Also, this belongs in the General Forum.

* Download and extract the .zip = done
stuck at:
* Use a terminal emulator or ADB Shell and mount system as read/write.
unfortunately this is where i have no idea what terminal emulator is and how to use it, nor what ADB shell is.

Download root explorer, go into your base dir and click the "mount as r/w" button at the top

4biddenskill said:
* Download and extract the .zip = done
stuck at:
* Use a terminal emulator or ADB Shell and mount system as read/write.
unfortunately this is where i have no idea what terminal emulator is and how to use it, nor what ADB shell is.
Click to expand...
Click to collapse
Which zip have you downloaded and extracted?
Have you read any instructions that are all over this site and many others?
There are literally video tutorials that go step by step from stock out of the box, to rooted and installing a ROM.
Search is your friend. Your best bet is to do some reading before you attempt to install a custom ROM. It's actually quite simple to do, hell I have upgraded my ROM while driving from the hanger at work over to the airport terminal.
However, if you don't know what you are doing, and aren't familiar with the concepts, you can and most likely will end up with a nice shiny brick. (soft brick most likely)
So, find the INFUSED rom thread and start reading and looking at the tutorials he has posted before you take another step. Then, and only then, if you still have questions, people will be very happy to help you out.

Also, as for unlock - if you read through the various threads on this forum, there are two methods covered for obtaining the SIM unlock code for our phones. One requires your phone to be rooted already, one is a script that roots the phone, extracts the code, and then optionally undoes the rooting.

Thanks a lot guys. I really should slow down and read stuff properly. Will let u know how im doing. Thanks again for being there.
Sent from my SAMSUNG-SGH-I997 using XDA App

4biddenskill said:
Thanks a lot guys. I really should slow down and read stuff properly. Will let u know how im doing. Thanks again for being there.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Good insight.
Closed.

[Q] Wanting To Root

Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.

priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
Android adb http://developer.android.com/guide/developing/tools/adb.html
which is in the sdk http://developer.android.com/sdk/index.html
You dont really need to know what the other tools are listed do, you just need to do what it says with them and the tools are linked in the thread you're reading to download I assume. If they aren't, then read through the manual method that is stickied in the developer's forum. A link for the tools (misc.img, busybox, and psnueter) can be found there.

I was a little nervous at first myself. I read over the directions several times and then found some information on how to get adb installed and working. Once I got that step understood the actual rooting process was super easy. You can cut and paste all the commands to ensure you don't typo. Just make sure to validate your checksums to save any potential headaches. My first attempt at it took about 20 minutes and I had absolutely ZERO issues.
It is well worth your time and effort. It is also far better to use this method than the easy root 1 steps as you will gain a slightly better understanding of how your phone works and what steps you can take when you inevitably mess something up flashing ROMS, mods and radios

Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.

There are also videos on YouTube showing JCases method and adb setup. I would link but I'm on my phone but it shouldn't be to hard to find.
Sent from my ADR6400L using XDA App

priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
reading through this might help http://forum.xda-developers.com/showthread.php?t=1143188

There is no "easy", reliable way to root sans ADB and command lines. You will need to know this stuff before you try to root. You're going to need ADB in any event. If learning it isn't knowledge you desire, you shouldn't root your phone. For terms, you should refer to the dictionary stickied at the top of the forum. The best way to learn is to get the Android SDK, set it up, make sure your drivers are there, then play with ADB. Do simply stuff like check your serial number, the md5 of files on your SDcard, and harmless stuff like that. If you've got any questions along the way, feel free to PM me any time. I'm here often. And I'm usually faster than hunting through forums or the internet.

priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2

I would not recommend "easy" root methods, since there is greater room for error. Understanding ADB will help you in the long run

MeAt.HoOk said:
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
Click to expand...
Click to collapse
Don't think z4root works on the Thunderbolt just search youtube for Thunderbolt root and watch the tutorials. Links are provided for everything that needs to be downloaded.
Sent from my ADR6400L using XDA Premium App

I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.

loonatik78 said:
I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.
Click to expand...
Click to collapse
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App

nerogold said:
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.

loonatik78 said:
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.
Click to expand...
Click to collapse
Sorry man I just wanted to say thanks to the other user I mentioned ,his method of rooting was and still is a great help to me already rooted 5 bolts and currently on #6 as I'm typing.
Sent from my ADR6400L using XDA Premium App

Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.

Greywolf66 said:
Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.
Click to expand...
Click to collapse
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.

Ive used the one click root four times with no issues. Four diffrent tb's from 3 diffrent states. 2 of them had alrdy takin the ota's. Dont have the link handy but if was a time saver. Though a half arse understanding of the method helps avoid issues. Ill post the link when i get home.
Sent from my ADR6400L using XDA Premium App

loonatik78 said:
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.
Click to expand...
Click to collapse
I rooted mine manually first. As you said in a previous post most "easy" roots are just scripts. That's what the one I used on my wife's was. I was following along the text of the batch file as I was running it so that if something happened I would know at what part of the script I was at. I had no problems with it though.
I'll agree that I could see where if someone where to run into a problem using script without any knowledge of what the script was doing they would probably end in a very bad place.

I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.

TabGuy said:
I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.
Click to expand...
Click to collapse
Come on, cut him some slack. Everyone was new once. He has already been warned.
Sent from my ADR6400L using XDA App
priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
ADB "Android Development Bridge" Simply put just helps you develop apps and fix bugs. (In this case, you will use this to reinstall Android without a locked bootloader (a.k.a. S-Off) (the bootloader is code that is run when you first turn on your device that tells Android to run).
You don't have to know how to use ADB, but you must install it on your computer.
As far as copying and pasting commands go, the tutorial that you choose to visit will tell you to type this command ex: cp image.zip/sdcard/
You will just copy this code out of your browser (FireFox/Internet Explorer/Chrome/etc.) and paste it into a command line.
Your command line will depend on what operating system you use on your pc. Ex for Windows, you will use "Command Prompt" or on Linux/MAC you will use "Terminal".
As far as validation checksums goes, it is used to make sure that the file that you downloaded is 100% the same file that the developer made.
Basically, open up your command line and type (without quotes) "md5 image.zip" also, make sure you change to "image.zip" with whatever/where you file is at.
I would be more specific with these instructions I'd I knew what OS (operating system) you are using on your computer is.
After you type in the command and hit enter, it will spit out a long string of gibberish. Just make sure this "checksum" is the EXACT same as whatever the devolver put in the tutorial you are following.
As far as putting together an idiot proof guide, you will have to forgive us, but I don't think the people here want to have a bunch of people here flooding the forums with very basic questions that have been answered already on the internet. However, don't let that stop you from asking questions. Just make sure you help yourself first (Google what you don't understand) and then ask for clarification.
P.S. I claim touchscreen amnesty for any typos.
Sent from my ADR6400L using XDA App

[GUIDE] [VIDEO] Various Guides Including Root and ROM reviews

Sticky Worthy?
How To Guides in Video Form:
How To One Click Unlock Bootloader http://www.youtube.com/watch?v=sSVD5b9nAcI&list=UU1J4DKcJXENzC-FkyMU6dow&index=15&feature=plcp
How To Manually Unlock Bootloader http://www.youtube.com/watch?v=sSVD5b9nAcI&list=UU1J4DKcJXENzC-FkyMU6dow&index=15&feature=plcp
One Click DebugFS method: http://www.youtube.com/watch?v=EpuiKIl7lpI&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
Video Root Guide: http://youtu.be/cuiJYKV2GGU
^^This is just a Visual aid for the method provided by Invisiblek outlined here http://forum.xda-developers.com/showthread.php?t=1756885
How to Update Your Baseband/Modem to latest OTA : http://www.youtube.com/watch?v=K2dQ2kv9kYs&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
How To Nandroid backup in Cwm Recovery: https://www.youtube.com/watch?v=4zWSK7cO3xg&feature=youtube_gdata_player
How To Unbrick, Unroot, Factory Restore Galaxy S III http://youtu.be/p0T4FO_NZ8Y
How To Easily Backup Apps and Data to Flashable.zip http://youtu.be/OPPoKlu_4qw
How To Install CM9 or CM10: http://youtu.be/f68NgGgrwAQ
How To Back up and Restore IMEI: http://www.youtube.com/watch?v=dl6Ms3oVEDo&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
How To Use Your SGS3 as a Netflix Remote: http://www.youtube.com/watch?v=JICq0P1Ywg4&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
Rom Reviews and Install Guides:
JellyWiz Touchwiz Jelly Bean 4.1.1 Rom Review and Install: http://www.youtube.com/watch?v=twDBZg4wkBk&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
Liquid v2 RC3 Rom Review and Install http://www.youtube.com/watch?v=ieuy5Bx76-Q&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
AOKP 4.1.1 Rom Review and Install: http://www.youtube.com/watch?v=kjULad8XS-4&feature=share&list=UU1J4DKcJXENzC-FkyMU6dow
MIUI v4.1 Jelly Bean Review and Install for Unlocked Bootloaderhttp://www.youtube.com/watch?v=azkToBXLjig&list=UU1J4DKcJXENzC-FkyMU6dow&index=2&feature=plcp
Cyanogen Mod 10 Jelly Bean for Unlocked Bootloader http://www.youtube.com/watch?v=7nW0SRKxUQk&list=UU1J4DKcJXENzC-FkyMU6dow&index=14&feature=plcp
Clean Rom Full Review and Install For Unlocked Bootloader http://www.youtube.com/watch?v=0PtIKXddfNI&list=UU1J4DKcJXENzC-FkyMU6dow&index=7&feature=plcp
Bean's Custom Stock Rom Review and Install For Unlocked Bootloader http://www.youtube.com/watch?v=napoMpZKCDA&list=UU1J4DKcJXENzC-FkyMU6dow&index=13&feature=plcp
First ROM Stock Stripped by Invisiblek: for Locked Bootloader https://www.youtube.com/watch?v=9Oek_24wEXI&feature=youtube_gdata_player
Cyanogen Mod 10 Rom Review: for Locked Bootloader http://youtu.be/2efLx_iTBDk
AOKP Android Open Kang Project Milestone 6 Review and Install for Locked Bootloader http://youtu.be/ATiFaCssKHs
Synergy Rom (Battery life and Stability) Review and Install for Locked Bootloader http://youtu.be/bj7w2nu_sKk

fix your link. you forgot the opening [ preceding the closing youtube tag.

Could you please do a back-to-stock video as well?

Thanks for doing this. First Samsung phone so it's quite new to me. Appreciate the video, it'll definitely help
Sent from my PC36100 using Tapatalk 2

Always wish these were made for each phone, the devs put so much work into making roms and root methods, but usually skimp on the instructions for those of us who aren't as experienced. Thanks for this

I will try to update this thread with any other videos I make, or I might make a separate thread. Glad its helped though.
Sent from my Galaxy Nexus using xda app-developers app

Thanks for the video. I'll be going through this as quickly as I can get home from work tomorrow!!

Great video, but in your description, to install the SDK using the Java links, I installed the JDK but the SDK install still thinks it's missing, and won't go any further, making me Cancel out. No idea what to do now...no SDK = no ADB commands :-(

minmongoblin said:
Great video, but in your description, to install the SDK using the Java links, I installed the JDK but the SDK install still thinks it's missing, and won't go any further, making me Cancel out. No idea what to do now...no SDK = no ADB commands :-(
Click to expand...
Click to collapse
Alos agree great video and helped me do root in no time at all! However, like you I am unable to get the adb part of the video working. I followed your other video and written instructions to the "t", and I only got as far as..
"adb is not recognized as an internal or external command"
I got the Java JDK to install fine as well as the SDK with all the required installs you said were needed for it to work. I left out all others as I'm not really too familiar with adb is it is. I changed the path, and named folders and files exactly as you did in your video. However I could never get the cmd to show adb devices.
I know the original post stated that we should know how to use it before we try this, but after trying to do research on this for the past 4 hours last night.. I concluded I have no idea what I am doing wrong/nor how to do it properly apparently.
If anyone would be able to possibly give me some assistance that would be great .

Lemonhead8890 said:
Alos agree great video and helped me do root in no time at all! However, like you I am unable to get the adb part of the video working. I followed your other video and written instructions to the "t", and I only got as far as..
"adb is not recognized as an internal or external command"
I got the Java JDK to install fine as well as the SDK with all the required installs you said were needed for it to work. I left out all others as I'm not really too familiar with adb is it is. I changed the path, and named folders and files exactly as you did in your video. However I could never get the cmd to show adb devices.
I know the original post stated that we should know how to use it before we try this, but after trying to do research on this for the past 4 hours last night.. I concluded I have no idea what I am doing wrong/nor how to do it properly apparently.
If anyone would be able to possibly give me some assistance that would be great .
Click to expand...
Click to collapse
Is your usb debugging enabled on your phohne?
When you cd <path to platform-tools>, then type: adb.exe
Does a long list of commands scroll across the screen?

Having the same problem. I see the long list of commands. But when I type "adb devices" nothing is listed.

trginter said:
Having the same problem. I see the long list of commands. But when I type "adb devices" nothing is listed.
Click to expand...
Click to collapse
I haven't tried it myself yet, but it sounds like you don't have the drivers properly installed.
Sent from my Ally (Cant wait to get rid of this POS and replace it with my S3 tomorrow!)

NightxFall said:
I haven't tried it myself yet, but it sounds like you don't have the drivers properly installed.
Sent from my Ally (Cant wait to get rid of this POS and replace it with my S3 tomorrow!)
Click to expand...
Click to collapse
That would be my guess. Put it in USB Debug mode, and plug the phone in, I think it auto-installs the ADB drivers.

Hmm, the phone is in USB Debugging Mode and plugged in, nothing downloaded.

trginter said:
Hmm, the phone is in USB Debugging Mode and plugged in, nothing downloaded.
Click to expand...
Click to collapse
What is the exact output when you type adb devices?

Good to know root is avail
Will try this tomorrow after work

s197 said:
Is your usb debugging enabled on your phohne?
When you cd <path to platform-tools>, then type: adb.exe
Does a long list of commands scroll across the screen?
Click to expand...
Click to collapse
For those having problems with this, look up "how to add a path to the windows command line“. You should not have to CD to a directory to make a command work .
Sent from my SCH-I535

s197 said:
Is your usb debugging enabled on your phohne?
When you cd <path to platform-tools>, then type: adb.exe
Does a long list of commands scroll across the screen?
Click to expand...
Click to collapse
Yes, usb debugging was on when I tried to do this. I usually always just leave it on honestly.
I guess I should have been more clear about where I was at, but yes i did the
cd platform-tools .. enter.. then adb.exe.. and thats when I got the 'adb' is not an internal or external command. I dont know where I messed up along the way... . I feel pretty confident I did everything correctly.
However there was one difference i did notice. On the path stated in the guide it says system32 something then you list the path to platform tools and whatnot.... but mine had something /windowspowershell/ or something like that.
I went back to the start and deleted my drivers and reinstalled them but deleted the jdk and sdk for the time being.. Maybe ill try again soon if I can figure it out better.

I believe this will help a lot of you. Thanks goes to Adrynalyne....
http://forum.xda-developers.com/showthread.php?t=879701

Lemonhead8890 said:
Yes, usb debugging was on when I tried to do this. I usually always just leave it on honestly.
I guess I should have been more clear about where I was at, but yes i did the
cd platform-tools .. enter.. then adb.exe.. and thats when I got the 'adb' is not an internal or external command. I dont know where I messed up along the way... . I feel pretty confident I did everything correctly.
However there was one difference i did notice. On the path stated in the guide it says system32 something then you list the path to platform tools and whatnot.... but mine had something /windowspowershell/ or something like that.
I went back to the start and deleted my drivers and reinstalled them but deleted the jdk and sdk for the time being.. Maybe ill try again soon if I can figure it out better.
Click to expand...
Click to collapse
It sounds like you're not moving to the right directory. Check to see where your adb file is, on the new SDK it's in platform-tools but if you downloaded ADB from a long time ago, it's in another folder (I think tools, but it's been a while).
What I would do is navigate to your adb file from "my computer". At the top, under address, it will show you the path you need to type. For instance, for me, I open my computer, C: drive, Android folder, then platform-tools. So my path would be:
Code:
cd C:\Android\platform-tools
Everyone's path is different depending on where you put your files.