[Q] [help] bricked rogers captivate triedneverything - Captivate General

So i decided to flash back to stock with odin, and it got stuck on the do not unplug on odin, so after a while it didnt moved, i unpluged my phone and now it wont boot and i cannot flashed back to stock because it will do the same thing over and over again,i tried removing the battery and replugging aoany time it wont work, my phone can only go in download mode if someone have sometips before i think thaty phone will never work again thanks fornthe advice

Related

Kies Firmware Update Screwed up my 6210

I plugged in my device and Kies said there was a firmware update. I let it go through it's paces and upon reboot, it just sits at a pulsating samsung logo.
I've tried reflashing a stock GB image using Odin. Even tried an ICS one. All of them result in the same pulsating samsung logo going nowhere.
What steps can I take from here?
Power + Vol Up
Select Wipe/Factory Reset
Cross your fingers...
Good Luck
I couldn't get recovery to come up before. But it did this time . Anyway, we're back in business. ICS is fantastic on this!
Hi people, I update my tab7+ 6210 to ICS everything was fine, but sometimes I got random reboots and today it suddenly turn off, I tried to turn on but nothing happens, so I plugged into charge but show no signs of life, I tried to enter stock recovery but accidentally enter download mode, Im screwed?, please I need some guidance. Thanks.
--------_______________________-----------
IT boot again, Im going to try enter recovery and do the wipes.

[Q] Please help phone won't turn on after flash

I unlocked bootloader and rooted a couple of days ago. Phone was running smooth. I downloaded and installed cwm. Today I downloaded Bean's Build 14 and tried to install through cwm. When it rebooted I got stuck on the Samsung screen. I tried to flash back to original settings with Odin but now my phone won't turn on at all. I am charging but no battery indicator or led is on to indicate charging. Please help.
Try leaving it plugged in for an hour, and then trying. Also might want to try leaving the battery out for 30 min and trying again. If you are unable to get any response from the phone, then it is likely hard bricked. The only thing that can save it at that point is sending it in for JTAG repair. That service starts at $60.
JHomrig said:
I unlocked bootloader and rooted a couple of days ago. Phone was running smooth. I downloaded and installed cwm. Today I downloaded Bean's Build 14 and tried to install through cwm. When it rebooted I got stuck on the Samsung screen. I tried to flash back to original settings with Odin but now my phone won't turn on at all. I am charging but no battery indicator or led is on to indicate charging. Please help.
Click to expand...
Click to collapse
How did you unlock the bootloader? using EZ-Unlock? Also did you make a nandroid before you flashed? If so try booting into CWM using VOL+ Home and Power and restore your nandroid and see if that works.

Help plz

my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that the phone doesnt reboot,i only reboots when i try to leave it on
Edit:
-so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t
Hello mate just do this it wil take you to the latest fiwmware for your s6 but every thing will be deleted its emergency firmware recovery on smart switch this wil work 100% dont think just do it this will fix every single thing i but try first to flash a stock rom via odin if that doesnt work than you have to do a emeegency firmware recovery i had the same problem even when i flash a rom via odin did not work but this wil fix it for sure just go to the link below and try it out good luck!
https://youtu.be/7ncsfXdjL_Q

My S7 Duos is totally unresponsive, black screen but blue LED is on

I had my phone just sitting on a wireless charger this morning and had been there for about 15-30 minutes. I noticed it was rebooting, odd I thought? I took it off and then realized it was going into a boot loop. I gave it a soft reset and then it would turn on and stay on for about 10 seconds before boot looping again. I again gave it a soft reset after a couple loops and now it seems to totally dead, as the title implies.
No button combination has worked and I've held them all down for well over 30 seconds each. I've tried plugging it into my PC and haven't gotten any response that way. The blue LED is on so I know it's not dead...I think? To make matters worse, I bought this phone off Craigslist about 5 months ago and it's the Exynos version so I definitely can't get any kind of warranty on it. I'm hoping someone has had this problem and can help or just has some advice. Thanks everyone.
EDIT: To keep this updated, I have been able to get into Odin Mode and have tried to flash stock firmware. Odin says everything went fine but the phone hangs up at the Samsung Galaxy S7 logo. I'm unable to boot into recovery mode and I've even tried to reinstall TWRP with Odin and that has not worked.
Seen the LED only problem before, waiting for the battery to drain and the phone to turn off seems to be the only known cure atm
Once it does, connect the charger for 15 mins, then boot directly into recovery and clear caches to try fix the bootloop, possible it may need factory resetting / clean flash of stock ROM
Using the MicroUSB > USB white adapter, you may be able to connect a power hungry USB peripheral to the phone to drain the battery faster, I use a USB desktop fan, but some people report it not working when it is stuck in this LED loop and have just had to wait it out
Thanks for that advice, I'll let it drain over night. However, I have been able to get it to boot into Odin Mode and Odin v.3 recognized it. I flashed the stock firmware but upon rebooting nothing happened and now it gets stuck at the Samsung logo screen. I can still get it back into Odin mode, which I believe will be the fastest way to kill the battery, but I find it odd that I can get into that but not recovery? I am rooted and have TWRP installed, if that matters at all.
If you can get into Download (ODIN) mode, then letting the battery drain probably won't help, that only seems to help when the phone is completely stuck with nothing but the LED working
Make sure you flash CSC (Not HOME_CSC) along with the other 3 sections of the ROM, using ODIN 3.12.3, that should factory reset the phone after the flash
If you successfully flashed stock with ODIN already, you are no longer rooted and do not have TWRP installed, flashing stock with ODIN replaces all that with stock
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
jonny727272 said:
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
Click to expand...
Click to collapse
Any region would work, and the F firmware works for the FD too

Hard Bricked a Samsung

Hello there, short story, flashed with odin 3.12 the stock firmware a SM-531F Grand Prime, and the power got cut in the middle of the phone flashing, after i restarted the phone, he ran in Emergency Donwload mode, requesting kies recovery, i tried to reflash the firmware, but odin said is failed, i though if i restart one more time will be fine, and from this point, the phone have absolute 0 life, is not booting, is not vibrate, no light, doesn't make connection even with the pc, what should i do? as i think the phone is still locked up in that edl session, exist a test point method or something? i really need to revive this phone.
I know there is a solution, thins thing could happen on any samsung, did someone faced the same problerm?
Did you try to flash the stock rom again?
Just try flashing stock ROM again.

Categories

Resources