Database Info

[ROM] [MT3G LE,1.2] KiNgxKxROM Sense Hybrid v2.3 ported

Using dsixda's rom kitchen and with some trial and error with a few other roms I ran into some luck with KiNgxKxROM Sense Hybrid v2.3.
It's a bit of a pain to get past the setup screen (or at least for me) so you just have to have some patience.
What doesn't work:
Wi-Fi (I need someone with some experience to help with that if you don't mind)
Camera
Anything else that we might discover
What this does have:
It should have everything that the original rom has
Bluetooth works
Multitouch browser
Anything else that we might discover
Requirements
A rooted MyTouch 1.2 device (duh!)
SDCARD with fat/swap/ext3 partition (not sure if 2 or 4 works... haven't tested. Let me know)
A complete wipe (dalvik-cache, data, ext partiton)
A little patience.
I had it freeze up a couple of times on me so this is far from perfect but it might be a start to someone that wants to rip it apart and try it for themselves, upload it and I'll update the link for a more perfected version.
And please don't ask:
[Q] "Why are you posting a Cupcake 1.5 rom up when we're expecting Eclair at anytime now?"
[A] Because it just so happened to work. Okay?
But therein may lay the problem with the stability. A 1.6 kernel with a 1.5 rom would very likely tend to cause some issues... but I don't think it's half bad since it's my first ported rom.
So if any mouth-breathers wants to get all hyper about this not being perfect release I'll invite you to give it a shot. I intend on experimenting with more to see what I can get to work. In the meantime, this is a start I think.
I'm hoping that someone can help me figure out the wifi and camera issues so that we can have this closer to completion. Other than those I think this is pretty much finished. Unless someone discovers something that I didn't with my entire 15 minutes of playing around with it.
Click the disclaimer below to download.
Enjoy!
"I accept the fact that if I do not know what I am doing or how to apply this rom then I will research first before asking any questions and will in no way shape or form hold anyone with the exception of myself liable for any damages that which may occur. I understand that I should do a backup prior to clicking and downloading any links and files within this post. I also understand that I am chosing on my own will to continue at my own risk."

reserved
reserved for future use

reserved for future use

ill give it a shot

oreddy32 said:
ill give it a shot
Click to expand...
Click to collapse
Thanks! Let me know if you can help me out with working out the kinks.
I'm trying a few more too.

extremely laggy but for a first it works

visualkei94 said:
extremely laggy but for a first it works
Click to expand...
Click to collapse
Most Hero roms are pretty laggy. You have to enable swap to get it to smooth out. I'm playing with a few more right now. I'm trying to find a decent 1.6 and 2.1 Hero roms that work.

alright i enable swap its some wat smoother but still alittle buggy i think its because of the kernel

visualkei94 said:
alright i enable swap its some wat smoother but still alittle buggy i think its because of the kernel
Click to expand...
Click to collapse
Pretty likely. It's open for improvement.

i got the wifi working on it but then the touch screen doesnt work

visualkei94 said:
i got the wifi working on it but then the touch screen doesnt work
Click to expand...
Click to collapse
What did you do for the wifi to work?

i flashed the deport 1.0 from here (http://twistedumbrella.slackdev.com/Deport-1.0.zip)

Downloading now...

if u can edit it to get the touchscreen to work for the mytouch le it would be great!!!!

visualkei94 said:
if u can edit it to get the touchscreen to work for the mytouch le it would be great!!!!
Click to expand...
Click to collapse
Okay... the reason why the touchscreen doesn't work is because there is a boot.img in that zip file. Inside the boot.img is the kernel which allows the wlan.ko for the wi-fi to operate. Even if I was to just use those files (that is without the boot.img) it still more than likely won't work. It would likely bare the same results. Does your bluetooth work still?

yup works 100% percent ill try to edit the port so the touchscreen works, if i have any sucess ill tell u

visualkei94 said:
yup works 100% percent ill try to edit the port so the touchscreen works, if i have any sucess ill tell u
Click to expand...
Click to collapse
Thanks. Good luck. I'm busy working on other roms. I have a total of eight to test out finished.

I love Sense UI, so this ROM is awesome. The camera and wifi working would be a plus, but it's still pretty solid. Thanks Binary 100100!

C0dy said:
I love Sense UI, so this ROM is awesome. The camera and wifi working would be a plus, but it's still pretty solid. Thanks Binary 100100!
Click to expand...
Click to collapse
I have another one that I'm working the kinks out with. It's the Eris rom ported. Camera works, bluetooth doesn't. It's always something isn't it? LOL. But it's a good start.

visualkei94 said:
i flashed the deport 1.0 from here (http://twistedumbrella.slackdev.com/Deport-1.0.zip)
Click to expand...
Click to collapse
Your problem is that the Deport file is a kernel. So you are flashing a non working kernel over our working kernel. Thats why there is no touch. To get the wifi working you gota push a wlan file from another rom.. but then it normaly takes out bluetooth.
EDIT- Ooops.. Its a 1.5 rom.. Think Ill say NEY lol

[Kernal] Fresh 2.3.3 OC 710 undervolt darchshiz #15 Kernal/boot.img flashable zip

This Kernal is meant for Fresh 2.3.3 roms and might work on other fresh roms as well. This has not been fully tested but is working great on my phone. I take no credit for this. You can thank Decad3nce for puting together the boot.img and Darch for his once again great kernal. This still has the Free memkiller in it. Esentually this is the darchshiz #15 kernal with the 710 free memkiller ramdisk that is out.
thanks goes to making this too
Decad3nce for putting it together
Darchstar for his undervolt and kernal work
Urushiol for the initial ramdisk
Toastch for his great kernal base
Use at your own risk
I am not responsible for any issues with your phone after flashing this
Always nandroid before flashing
Enjoy
Fresh_2.3.3_OC_710_UV_DarchShiz_#15.zip
To install
1. download and put on root of sd card
2. restart phone in recovery mode
3. make a nandroid
4. flash a zip from sd card
5. reboot
best of luck and thank you again Decad3nce and Darch

testing right now.

Checking it out

This should work great, only I believe this kernel will have the AOSP touch screen driver so there will be input lag. Would love to get a zImage of this with HTC synaptics

dumb question, this will only work on fresh? it wont work on nfinit's rom?

urushiol said:
This should work great, only I believe this kernel will have the AOSP touch screen driver so there will be input lag. Would love to get a zImage of this with HTC synaptics
Click to expand...
Click to collapse
yeah im noticing the lag a little. ur more than welcome to redo it. I dont mess with kernals i just asked decad3nce to throw it together for me so i could have undervolt in my rom. He said he didnt care if i posted it. but your more than welcome to redo and make better. actually your thread is much better for this and im guessing with the undervolt it would be nice to have for all your boot.imgs

Papa Smurf151 said:
yeah im noticing the lag a little. ur more than welcome to redo it. I dont mess with kernals i just asked decad3nce to throw it together for me so i could have undervolt in my rom. He said he didnt care if i posted it. but your more than welcome to redo and make better. actually your thread is much better for this and im guessing with the undervolt it would be nice to have for all your boot.imgs
Click to expand...
Click to collapse
If I wasn't lazy to compile darch's source with the right synaptic drivers lol. Just bug Darch to do a proper one, I don't think he'll mind.

Papa Smurf151 said:
yeah im noticing the lag a little. ur more than welcome to redo it. I dont mess with kernals i just asked decad3nce to throw it together for me so i could have undervolt in my rom. He said he didnt care if i posted it. but your more than welcome to redo and make better. actually your thread is much better for this and im guessing with the undervolt it would be nice to have for all your boot.imgs
Click to expand...
Click to collapse
=)I wish I could, I haven't managed to learn enough just yet to compile the kernel image from scratch with the right driver, I can bust open a kernel and mess with the ram disk, but that's as far as I can go, we need Darch!
Darch if you can hook us up with a zImage of this with the proper touchscreen driver! <3

Decad3nce said:
If I wasn't lazy to compile darch's source with the right synaptic drivers lol. Just bug Darch to do a proper one, I don't think he'll mind.
Click to expand...
Click to collapse
dude i never said you were lazy. i have no idea how to compile so i give u mad props. right now im loving this and it works great. i touch works just fine. i notice a small lag but its so worth it. Thank you

May i ask what exactly undervolting a kernal does?

primerib said:
May i ask what exactly undervolting a kernal does?
Click to expand...
Click to collapse
lower voltage = less power consumption = better battery life = cpu runs cooler = longer cpu life. all while maintaining the same performance as long as stability is achieved at the same cpu speed

for people dying for the perfect vanilla unlock with no lag dontforget flipz made one months ago
http://geekfor.me/hero/fixes/vanilla-lockscreen/

Confirmed that this kernal also works with ZenEXP 0.9.6.2.

Confirmed working on fresh 2.3.3 just tested it. Great job! My gf's hero is almost as badass as mine with CM6.0

Have been running for a few hours with no issues. And, I'm not seeing any unlock lag or lags of any kind when waking up so far.
Great job to all who made this work! I'd thank you each individually, but I don't know who all's work went into this.

how much better will the battery life be if i flash this?

chinkster said:
how much better will the battery life be if i flash this?
Click to expand...
Click to collapse
not sure it hasnt been tested long term yet. ive been using it for two days now and i can notice a difference

can somebody confirm if wifi is working or not? Not working on my

cteneyck said:
can somebody confirm if wifi is working or not? Not working on my
Click to expand...
Click to collapse
Everything works as before on mine with ZenEXP.

cteneyck said:
can somebody confirm if wifi is working or not? Not working on my
Click to expand...
Click to collapse
redownload. i just updated the link about 5 min ago. i didnt have the right files in for the wifi to work. it should work now...sorry

Baked Snack 1.0 9/23 "Oh my Word" "1.4ghz!!!Battery life and 270 degree rotate"

Baked Snack 1.0 9/23 "Oh my Word" "1.4ghz!!!Battery life and 270 degree rotate"
Hello All
This ROM is a compilation of my last week. So many hours were drained on this sucker but here it is.
**currently this is only available at it will be out to the public in 3-...CLOSED AWAITING PUBLIC RELEASE VERSION OF ROM

I don't hate you!

Do we just install this through custom recovery then?
OH I see, so what if we dont go back to stock with odin?

I see two different versions here.
Can you tell me what's the difference in two? I know one is over clocked one by the name but I want to know what does other one does..
Thanks,

siptang said:
I see two different versions here.
Can you tell me what's the difference in two? I know one is over clocked one by the name but I want to know what does other one does..
Thanks,
Click to expand...
Click to collapse
The other one has the Andromeda Kernel.

im really hoping we get something soon like the htc's have......(get roms via rom manager) and not have to go thru this backdoor route for a custom recovery image!!!

mmmmm, think I'll wait a few days more....not sure I want to create work for myself just yet on my fresh stock rom w/root....

So far so good does have some boot problems which he stated but havent found anything else yet

guruleenyc said:
mmmmm, think I'll wait a few days more....not sure I want to create work for myself just yet on my fresh stock rom w/root....
Click to expand...
Click to collapse
All you have to if you are on the stock rom is extract the zip and run the bat script and you are good to go. It is very easy to do. And restoring from odin is just as easy. It is what I recommend but it should work without

[email protected] said:
I don't hate you!
Click to expand...
Click to collapse
I heart you too lol

Hero_Over said:
All you have to if you are on the stock rom is extract the zip and run the bat script and you are good to go. It is very easy to do. And restoring from odin is just as easy. It is what I recommend but it should work without
Click to expand...
Click to collapse
Its been running nicely for me for a couple days now. Have some startup issues now and again but for he better part OMG this is insane. Thanks

Hero_Over said:
All you have to if you are on the stock rom is extract the zip and run the bat script and you are good to go. It is very easy to do. And restoring from odin is just as easy. It is what I recommend but it should work without
Click to expand...
Click to collapse
Just an inquiry why go all the way back to stock? I have not modified my phone to much and am using the Andromeda kernel what will this do if I flash with this on my phone, shall I be a guinea pig? YES!~!!! FOR SCIENCE!

ok, im going to dive into this LOL!!!!
what is the difference between the 2 zip files??

Blitzpwnage said:
Just an inquiry why go all the way back to stock? I have not modified my phone to much and am using the Andromeda kernel what will this do if I flash with this on my phone, shall I be a guinea pig? YES!~!!! FOR SCIENCE!
Click to expand...
Click to collapse
It should work just fine. I just didn't want people to experience problems. Please try and report back

Hey Hero, just wondering if your kernel gets along with the new update that came out today?

Do you have full rom for members or this kernel is it?If so does this kernel change theme also?And whats the difference between andromeda posted on xda and the one you have posted on here?
Thanx in advance.

Was wondering the same thing, will this work with DI07?

sdotkumar said:
Was wondering the same thing, will this work with DI07?
Click to expand...
Click to collapse
yes it does. I flashed my d107 full rom from recovery today. it is looking very good

Hero_Over said:
yes it does. I flashed my d107 full rom from recovery today. it is looking very good
Click to expand...
Click to collapse
Did you flash the update from a new odin flash? I thought I saw a version of the update floating around here that didnt check for the official apps...has anyone got a link? I will thank

lviv73 said:
Do you have full rom for members or this kernel is it?If so does this kernel change theme also?And whats the difference between andromeda posted on xda and the one you have posted on here?
Thanx in advance.
Click to expand...
Click to collapse
lol there is a lot of differences. it is faster has better battery life and overclocks to 1.2 ghz. the frameworks have been optimized for more performance and battery. also there is a lot of theming to remove samsungs ugly colors. it is not just a kernel. it is a rom that instead of flashing moves files in place.

[Q] First time CM7 user.

Im gonna start using the CM7.
They are telling me to install GAPPS but when I click their link it, it takes me to a place with bunch of lists..idk what to do.
and what is CM7 Nightly? is it recommended to install that?

It tells you which gapps you need to install should say ace something or other. Just download it from that list.

For gapps, you want the one I highlighted in orange.

thanks.
what else should I do with the CM7? there are many cm7 links out there and its confusing me. T_T

P00t said:
thanks.
what else should I do with the CM7? there are many cm7 links out there and its confusing me. T_T
Click to expand...
Click to collapse
It's pretty solid with a fresh flash. You could flash a different kernel but the stock one is perfectly capable.

Do yourself a favor and flash ultimate droid instead of cm7. Ud is based on cm7, but much faster and with better battery life.

I tried cm7 and thought it was awful. Buggy, nd battery life sucked.

harlenm said:
I tried cm7 and thought it was awful. Buggy, nd battery life sucked.
Click to expand...
Click to collapse
+1. UltimateDroid is much better.

EvoXOhio said:
+1. UltimateDroid is much better.
Click to expand...
Click to collapse
Ick! There is a reason ultimate droid isn't allowed in xda. Do yourself a favor and do some research before flashing. Also I kinda don't understand how something that is merely a hacked and skinned version of cm7 is so much better.
Sent from my Monster G2 w/ meXdroid meXperia V2

PaganAng3l said:
Also I kinda don't understand how something that is merely a hacked and skinned version of cm7 is so much better.
Click to expand...
Click to collapse
This is the reason why I lol every time I see someone say that. It's just a re-skinned CM7 with a few more features (that you can do yourself) and a different kernel.
On topic, I would flash the latest nightly. It's just as stable as 7.0.2.
CM7 Inspire 4G

ICS amazing on Cappy

I just wanted to say thanks to guys for the work on ICS on the Captivate. I'm an experienced flasher (almost addicted), and I'm impressed. Thread can be found here. http://forum.xda-developers.com/showthread.php?t=1363760
I did a few things little different because I've never quite liked the CM Rom, but that's just me. I flashed mine over Cognition 5v2, but you have to twice. Also, I had to go back and put on the uckb1 modem....and started getting 2 to 3 bars on my signal where I used to never get any, with any phone. Slapped in Contol Freak and overclocked it to 1.3 ghz, Volume Control+ for some volume, and this sucker is blazingly fast, amazingly stable, and makes the Cappy even that much more impressive.
Sad part...two days ago was showing off my Super Soldering skills I did on applying Adam's Unbrickable Mod (yes I had my phone apart with the board in my hand in the middle of Wal-Mart's parking lot) when my screen slid off the car and sadly is now cracked....and it's still amazing!

The crazy crap that happens at Wal*Mart. Wtf lol
Sent from my SAMSUNG-SGH-I897 using XDA App

I love ICS on my cappy, I used Onecosmic's ICS 4.0.3 RC2.11 for i897 and couldn't be happier, I went from a non-rooted stock 2.3.5 to a rooted ICS and JVT modem which effectively fixed all my GPS woes as well.
http://forum.xda-developers.com/showthread.php?t=1398223

Absolutely love ICS. Thank you to all that worked on it. My phone has been really stable and usable. Love it. I was planning on selling it and invest into something new but not anymore. I'll use it until it dies or someone gifts me a newer phone. **Doesn't happen often.
Thanks again ICS team.
Sent from my SGH-I897 using XDA App

I just flashed the teamhacksung ICS ROM, and I have to agree, it is amazing. ICS looks great, and the transitions are silky smooth.

Im also runnin team hacksungs ics build, 13 that is. They have come a long way since i first tried it out on build 8 . keep it comin!

can we stop with the new threads about friggin ics already?

studacris said:
can we stop with the new threads about friggin ics already?
Click to expand...
Click to collapse
That would require the use of search. What do you think?

I'm pretty excited about the work and progress of MIUI's version of ICS
http://forum.xda-developers.com/showthread.php?t=1411763
It's a work in progress, but I've found it to be a lot smoother than the other ICS roms I tried from Onecosmic and THS

Whats the advantages on ICS over GB.... Besides the over all look and platform...
I been wanting to flash ICS but i think ill wait for a more stable release
but for the rest who already have it
how is it so far??

jayRokk said:
Whats the advantages on ICS over GB.... Besides the over all look and platform...
I been wanting to flash ICS but i think ill wait for a more stable release
but for the rest who already have it
how is it so far??
Click to expand...
Click to collapse
Teamhacksungs ICS build 13 is what I am using now, and it is very stable. The main advantage for myself is the increased battery life, way better stock web browser, among other things, you should give it a try. (I have been using it since way back, like build 3, lol)
They updated today to build 14 but I don't see any improvements in it that are relevant for the way I use the phone, so I am going to skip 14 and see what happens with build 15.
Hope this helps.

nok6100 said:
Teamhacksungs ICS build 13 is what I am using now, and it is very stable. The main advantage for myself is the increased battery life, way better stock web browser, among other things, you should give it a try. (I have been using it since way back, like build 3, lol)
They updated today to build 14 but I don't see any improvements in it that are relevant for the way I use the phone, so I am going to skip 14 and see what happens with build 15.
Hope this helps.
Click to expand...
Click to collapse
Thnx
im on SauRom at the moment and i love how stable it is..
...oh is it OCd? and data and wifi are good right??
thnx for the answer

I put ICS on my phone and it ran well for about an hour.
Then the damn thing melted and my phone won't boot!

Bruce Inman said:
I put ICS on my phone and it ran well for about an hour.
Then the damn thing melted and my phone won't boot!
Click to expand...
Click to collapse
OMG ICS melted your phone!? I"M REPORTING IT NOW!

I tried Flashing... got status 7 error(cause of build.prop)
i read that you have to flash CM7 to get passed that
got the same error FFFFFFFFFUUUUUUUUUUUU
what am i doing wrong???
i came from SauRom
with Corn Kernel
and kk4 modem
any help is appreciated

jayRokk said:
I tried Flashing... got status 7 error(cause of build.prop)
i read that you have to flash CM7 to get passed that
got the same error FFFFFFFFFUUUUUUUUUUUU
what am i doing wrong???
i came from SauRom
with Corn Kernel
and kk4 modem
any help is appreciated
Click to expand...
Click to collapse
Flash back to stock first (I use kh3 one click with cwm) then flash teamhacksung Rom, let boot fully, flash gapps 7.1, reboot and enjoy.
You must flash back to stock gingerbread first cause u probably have voodoo enabled on ur file structure, therefore ics won't install.
---------- Post added at 05:20 PM ---------- Previous post was at 05:14 PM ----------
Here is a link for kh3 Odin one click, with custom cwm (boogs kernel), this is what I use before flashing ics, works every time.
http://www.multiupload.com/02H0BJWHKV

nok6100 said:
Flash back to stock first (I use kh3 one click with cwm) then flash teamhacksung Rom, let boot fully, flash gapps 7.1, reboot and enjoy.
You must flash back to stock gingerbread first cause u probably have voodoo enabled on ur file structure, therefore ics won't install.
---------- Post added at 05:20 PM ---------- Previous post was at 05:14 PM ----------
Here is a link for kh3 Odin one click, with custom cwm (boogs kernel), this is what I use before flashing ics, works every time.
http://www.multiupload.com/02H0BJWHKV
Click to expand...
Click to collapse
I have Odin3 1.7 .... do i sue that one or is there another one click??
sorry for the n00bish q's but when i rooted i did it the old fashion way lol
now everyone uses Odin or Heimdall...
just need guidence on what to use cuz im far from a n00b
(rooted G1&2, MT, MT3G, Nexus One, Droid 1&2, Fascinate, and finally now Captivate.) so i know the risk i run but thnx for the help!!
EDIT:
Got it i didnt know it was a single exe file... ran it
and now i have ICS thnx a bunch!!!

jayRokk said:
I have Odin3 1.7 .... do i sue that one or is there another one click??
sorry for the n00bish q's but when i rooted i did it the old fashion way lol
now everyone uses Odin or Heimdall...
just need guidence on what to use cuz im far from a n00b
(rooted G1&2, MT, MT3G, Nexus One, Droid 1&2, Fascinate, and finally now Captivate.) so i know the risk i run but thnx for the help!!
EDIT:
Got it i didnt know it was a single exe file... ran it
and now i have ICS thnx a bunch!!!
Click to expand...
Click to collapse
Glad it worked out ics is like a totally different experience.
I can't go back to gingerbread after ics, lol. I also found cm7 (181) to be very stable too .
Just be sure before flashing custom roms, its a good idea to keep that one click handy due to differences in file structures, it avoids a lot of frustration.

nok6100 said:
Glad it worked out ics is like a totally different experience.
I can't go back to gingerbread after ics, lol. I also found cm7 (181) to be very stable too .
Just be sure before flashing custom roms, its a good idea to keep that one click handy due to differences in file structures, it avoids a lot of frustration.
Click to expand...
Click to collapse
Yeah i was having a nerdspazm when i was messing around with it...
i dont think ill go back to GB unles phone starts acting up, but
seeing on how its running ...Im thinking this is gonna be my daily driver

Hi, went from ICS_4.0.3.0(RC2.11)_Captivate_Full with/and ICS_Captivate_20120107_r3180v_update....Worked great but no 3g----went to----->
ICS_4.0.3.0(RC3.1)_Captivate_Full
Now for the life of my can't get an sms sent, receive as many as I like, just can't send one.