Related
http://www.facebook.com/notes/cyanogenmod/cm7-nightly-builds/10150118709971183
Liberty is up there... I don't want to be the sacrificial guinea pig though
WOOT, i think i just peed myself.
sd73ta said:
Seems a lot of people are having problems so Id like to add
0. Power down phone manually then boot into clockwork manually (Power on while holding volume down)
Click to expand...
Click to collapse
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Install CM 7. Nightly
seboj said:
4. Partitions menu > Format System
Step #4 can help you get past the bootlooping problem.
Click to expand...
Click to collapse
5. Install GB-GoogleApps!
6. Reboot and hello CM7
The 2.3 topic has the links.
Try using Move2SD Enabler so you can move apps2sd.
sent from my HTC Intruder
seem to be having wifi issues,
Apps to SD doesn't work but that's the only big problem i had.
Signatures are fancy.
Noz85 said:
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Install CM 7. Nightly
5. Install GB-GoogleApps!
6. Reboot and hello CM7
The 2.3 topic has the links.
sent from my HTC Intruder
Click to expand...
Click to collapse
Seems a lot of people are having problems so Id like to add
0. Power down phone manually then boot into clockwork manually (Power on while holding volume down)
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Install CM 7. Nightly
5. Install GB-GoogleApps!
6. Reboot and hello CM7
Awesome
Considering this is a nightly build, I am VERY pleased with it. Seems quite fast and stable. Was upgraded and had all my apps reinstalled within a matter of 15 minutes. Not too shabby. Great work to the devs.
Is this gingerbread?
akira02rex said:
Is this gingerbread?
Click to expand...
Click to collapse
Yes CM7 = Gingerbread 2.3
I can't seem to get past the htc screen on reboot. I have tried all of the various wipe methods others have posted several times. I've checked the md5 sums of the build and the gapps file. This is frustrating.
Update: Format system was the trick. Thanks everyone involved with this.
No problem with apps2sd here, only issue I've had so far is the trackball wake doesn't wake it up 100% of the time and the battery icon is way off (showing I had like 80% power when I really had 50%)
Overall really solid build I think it could be ready for beta / rc with a few tweaks.
Sent from my Liberty using XDA App
Hmm alright ill reflash and see but i am very pleased with this.
Signatures are fancy.
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Partitions menu > Format System
5. Install CM 7. Nightly
6. Install GB-GoogleApps!
7. Reboot and hello CM7
Step #4 can help you get past the bootlooping problem.
First of all.. Thank you for another wonderful release.
But couple of things I noticed, WiFi Issues(not connecting at all which is a deal breaker for me right now) and the font resolution(pixelated).
I hope these will be fixed very soon. Cant wait to flash the updated nightlies.
WiFi works great for me. I just have issues with the pixelation, trackball wake issues, and the delay of the screen turning on.
Is everything functional thus far?
Nvm
Noz85 said:
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Install CM 7. Nightly
5. Install GB-GoogleApps!
6. Reboot and hello CM7
The 2.3 topic has the links.
Click to expand...
Click to collapse
Thank you so much... I was able to follow these steps and it worked. So far so good, looks nice for a first nightly.
CM7 now boots
seboj said:
1. Wipe data/factory reset
2. Wipe cache
3. Wipe Dalvik
4. Partitions menu > Format System
5. Install CM 7. Nightly
6. Install GB-GoogleApps!
7. Reboot and hello CM7
Step #4 can help you get past the bootlooping problem.
Click to expand...
Click to collapse
Thanks for the addition of step 4; that solved my bootlooping problem. I had continuous bootloop without it. Also used the previous suggestion of doing a cold boot...Power Down, then go to Clockwork by holding in Vol. key and then hitting Power Button.
CM7
Love this nightly, no probs except I have 2 terminal emulators
2 terminal apps here as well. No other issues as of yet. Boot up time is fast =D
Sent from my Liberty using Tapatalk
Good morrning everybody.
Yesterday I tried to flash the circle battery found in ROM Manager into my Android 2.2 system. Clockwork Recovery suggested to run a backup, which I naturally did, and then it started to flash the battery into the system.
Until that point it worked fine and never returned an error or something else, but after the first reboot, the battery was properly replaced but nearly every app installed in my android crashes (googlemail, sms, phone, launcher pro, and so on) and my phone went into a boot loop.
Trying to restore my system with the Clockwork recovery manager also didn't work as it should, so I had to perform a full factory reset. (By the way, I got the same boot loop after trying to deinstall crapware via titanium backup)
My phone is a o2 - branded HTC Desire with Froyo, HBOOT-093.0001 and was rooted by unrevoked (S-ON).
Does anyone have an idea about that problem and know a solution? thanks in advance ;-)
cheers
PS: please forgive my when i wrote nonsense, it's 6 o'clock in the morning
Okay, I played a little bit around with my mobile phone and i figured something.
I made it to activate the plane mode before my phone decided to reboot again, so I managed to break this loop.
Now "only" "RSS-Reader, MMS, NewsReader, the Google Mail App, the "Google-Services-Framework (Prozess com.google.process.gapps)" and the Sense-Launcher crashes (maybe because I've a Mail shortcut or something on the screens, I don't know it exactly (using LauncherPro+)
I also read that flashing could set the ringtones to NULL (for the guys who aren't that deep into informatics: NULL = nothing; but NULL is not the number "0" (null-pointer-exception). I took a look into my settings but there are definitively ring tones set but unfortunately I can't take a look into my GMail app due to these crashes.
greetings
Cuupa
Try using Advanced -> Fix Permissions in CWM. It is supposed to help with FCs
Cuupa said:
Okay, I played a little bit around with my mobile phone and i figured something.
I made it to activate the plane mode before my phone decided to reboot again, so I managed to break this loop.
Now "only" "RSS-Reader, MMS, NewsReader, the Google Mail App, the "Google-Services-Framework (Prozess com.google.process.gapps)" and the Sense-Launcher crashes (maybe because I've a Mail shortcut or something on the screens, I don't know it exactly (using LauncherPro+)
I also read that flashing could set the ringtones to NULL (for the guys who aren't that deep into informatics: NULL = nothing; but NULL is not the number "0" (null-pointer-exception). I took a look into my settings but there are definitively ring tones set but unfortunately I can't take a look into my GMail app due to these crashes.
greetings
Cuupa
Click to expand...
Click to collapse
I had a similar issues on CM7 while the wrong gapps version was flashed :S
Hey guys, thanks for your reply.
@frosty_ice: from the CWM recovery menu (power + "vol-") I've only the options of
- reboot recovery
- wipe dalvik cache
- wipe battery stats
- report error
- key test
- restart adbd
- process dump
which are listed at "advanced"
When I select "fix permissions" in ROM Manager, it throws the error "Error while executing privileged commands" (translated from german, I don't know the original sentence)
I'm using ROM Manager v4.1.0.0
@metalron: I did not flashed any version of gapps, I only flashed the circle battery "SuperCircle Battery v.B" found at "Pinkolin - Pinky Desire". Does this automaticly flash other components into my system?
greetings
Cuupa said:
Hey guys, thanks for your reply.
@frosty_ice: from the CWM recovery menu (power + "vol-") I've only the options of
- reboot recovery
- wipe dalvik cache
- wipe battery stats
- report error
- key test
- restart adbd
- process dump
which are listed at "advanced"
When I select "fix permissions" in ROM Manager, it throws the error "Error while executing privileged commands" (translated from german, I don't know the original sentence)
I'm using ROM Manager v4.1.0.0
@metalron: I did not flashed any version of gapps, I only flashed the circle battery "SuperCircle Battery v.B" found at "Pinkolin - Pinky Desire". Does this automaticly flash other components into my system?
greetings
Click to expand...
Click to collapse
I think thats your issues, as far as I know you need gapps, that too the right version although most apps can be downloaded via market but then you need market and for some odd reason not flashing gapps or flashing the wrong one put me in a boot loop.. so im guessing its the same for you.
http://goo-inside.me/google-apps/
I have an LG Optimus V (Virgin Mobile) with 2.3.3 Gingerbread with aospcmod-ov-20110415-signed.zip running before becoming stuck in Android System Recovery. It happened when I tried updating the rom to aospcmod-ov-20110427. I had the proper gapps and follwed the flashing rom instructions from romrepo wiki. After that we lost clockworkmod recovery 3.0.0.6 . We then installed clockworkmod recovery 3.0.2.8 because it was the only one that would reinstall and it was recommended. Once it was installed no files from the sd card could be accessed so I removed clockworkmod recovery 3.0.2.8 . Once we removed cwm recovery 3.0.2.8 I was faced with the blue fastboot screen. To get out of the blue fastboot screen I had to use vm fastboot root. Once I did that I was able to go thru the full process of 1. Move all files you intend to flash to the root of your sd card (ex. aospCmod.zip, GAPPS.zip, kernel (optional)).
2. First you need to wipe/format your phone, in clockwork recovery: Wipe data/factory reset, wipe cache partition. Under Partitions menu (or Mounts & Storage in 3.0.0.6) in recovery: Format boot, system, data, cache. Under advanced: wipe Dalvik Cache.
3. Flash in this order:
A. AospCmod
B. GAPPS
C. Kernel (optional).
4. Reboot System
5. NOTE: On Optimus V when first logging in, if you click "Sign In" it will ask you to slide of your keyboard. Just go back and press "Skip." You can sign into your Accounts later in settings.
All of the processed went thru successfully and went to reboot and it rebooted back to Android System Recovery. I have checked my steps and tried this process continually but it keeps looping me back to Android System Recovery instead of loading the Rom.
Any suggestions would be greatly appreciated!
P.S. You can email me at [email protected]
Hi,
Thanks to thiagodark I've finally rooted my phone (Got it in Feb)
Now for step 2 ... Flashing Roms
Can some one suggest where I start? I see that the [ROM] [Nightly] CyanogenMod 7 (alpha) is pretty popular ... would that be a recommended start?
Two things I look to after flashing a rom would be a) install BLN (so, the rom has to have support for that) and b) should have the power widget in the notification (where I can pull down notification and toggle wifi, sound, bluetooth or whatever). Would also prefer if the a 2.3.4 Rom.
Two other things I'd like to know and would really appreciate help with are:
a) Can I flash a rom and then install any kernel ... are they all compatible?
b) I did a Google Search and found these steps to Flash a Rom:
Flash a Custom ROM
1. Head over to our Nexus S ROMs section, choose a ROM you want and download it and save it to your computer.
2. Plug your phone in and mount the internal storage so we can transfer files to it.
3. Copy the ROM .zip file over to the root of the internal storage (NOT in any folders, just on the internal storage itself).
4. Turn off the phone.
5. Turn the phone on by holding down Volume Up and Power until Fastboot mode comes up.
6. Scroll down and select Recovery and wait for the phone to reboot into recovery mode.
7. Once in recovery mode, scroll to Backup, then select Backup and wait for the phone to backup its current ROM.
8. Once it is done, select Wipe Data
9. Then select Flash zip from SD Card
10. Select choose zip from sd card.
11. Select the ROM’s zip file you loaded onto the internal storage earlier and wait for it to flash. Done!
12. Repeat to load a different ROM.
Click to expand...
Click to collapse
My question is .... Is step 7 what is called a Nandroid? And do I need to do this every time or do I just need to do it when I think that the current setup is good enough to back up? ... yes, I will do it the first time and then only when I think I like a Rom, but want to try another and may revert.
Thanks a ton
Paparasee said:
Hi,
Thanks to thiagodark I've finally rooted my phone (Got it in Feb)
Now for step 2 ... Flashing Roms
Can some one suggest where I start? I see that the [ROM] [Nightly] CyanogenMod 7 (alpha) is pretty popular ... would that be a recommended start?
Two things I look to after flashing a rom would be a) install BLN (so, the rom has to have support for that) and b) should have the power widget in the notification (where I can pull down notification and toggle wifi, sound, bluetooth or whatever). Would also prefer if the a 2.3.4 Rom.
Two other things I'd like to know and would really appreciate help with are:
a) Can I flash a rom and then install any kernel ... are they all compatible?
b) I did a Google Search and found these steps to Flash a Rom:
My question is .... Is step 7 what is called a Nandroid? And do I need to do this every time or do I just need to do it when I think that the current setup is good enough to back up? ... yes, I will do it the first time and then only when I think I like a Rom, but want to try another and may revert.
Thanks a ton
Click to expand...
Click to collapse
First you will want to do is download ROM manager onto your phone, then flash the latest Recovery from within it.
Then you should do a Nandroid (this is the backup option in recovery... do this while everything is stock) this backsup your whole phone (apart from SD card) so if you screw something up you can restore it! It is real useful, you can nandroid as much as you like, all it is is an image of your phone.
If you are just starting out i would avoid the CM nightlies and find the stable thread which is 7.0.3. That coupled with Netarchys latest kernel (includes BLN) really works wonders.
As far as the actuall flashing, all you need to do is copy both zip files onto your sd card, reboot into the recovery (you can do that from within the ROM manager).
Once in the Recovery, wipe data,cache and dalvik, then select flash from zip and choose the rom.
Wipre cache and dalvik again and then flash the kernel and restart the phone.
Thats it you should be good to go. If you ever get any Force Closes restart into recovery again and run the Fix permissions
Happy flashing
Edit
Compatibility wise, CM 7.0.3 is still android 2.3.3 (will be updated to 2.3.4 with cm7.1) so you need a 2.3.3 kernel. You also need to know if your phone is NS3G or NS4G, they are not compatible
Thanks bringonblink ... guess I'm starting to get an understanding now.
Is this Rom Manager available on the market? ... I'll check
Since rooting, I've used my phone for a day, so I presume you suggest that I wipe data and then do the nandroid in step 7 above, then install the Rom manager and go from there?
I understand your suggestion of the stable CM7. Since there is just one link for the download, no confusions
The Netarchy though is a different story ...
What is the CFS and BFS build stuff.
I'm currently using a Nexus S i9020 with 2.3.4.
So, I use the CM7 + which version of Netarchy?
Thanks once again
Paparasee said:
Thanks bringonblink ... guess I'm starting to get an understanding now.
Is this Rom Manager available on the market? ... I'll check
Since rooting, I've used my phone for a day, so I presume you suggest that I wipe data and then do the nandroid in step 7 above, then install the Rom manager and go from there?
I understand your suggestion of the stable CM7. Since there is just one link for the download, no confusions
The Netarchy though is a different story ...
What is the CFS and BFS build stuff.
I'm currently using a Nexus S i9020 with 2.3.4.
So, I use the CM7 + which version of Netarchy?
Thanks once again
Click to expand...
Click to collapse
Rom Mangager is in the market yes.
No before you wipe , flash, crack, hack ANYTHING else again do a bone stock Nandroid backup and save it on your pc or something. This is because RIGHT NOW your phone is in a working state. THEN wipe cache ,dalvik and data and flash Rom.
7.0.3 is really nice, i had been keepign upwith the nightlies but for me 7.0.3 is the sweet spot... will flash to 7.1 stable when its out though xD.
CFS and BFS are different types of shedulers that run the phone (there is a proper explanation in netarchys thread on the first post i think)
You will want to get CFS as it is mroe stable and generally more user friendly lol.
You'll want CM7.0.3 + CFS Universal 2.3.3 1.3.4
Hey bringonblink ... thank you for your reply
I installed Rom Manager as suggested and then flashed the latest Recovery from within it. Booted into Recovery and did a backup. I then went rebooted, went to my internal storage and found the backup in a clockworkmod folder.
I then went to Rom Manager again and clicked on "Install Rom from SD card". I chose update-cm-7.0.3-NS-signed.zip, ticked Backup, Wipe Data and cache and Wipe Dalvik Cache then pressed ok to reboot.
I then got the big triangle with the ! and droid ... waited, nothing happened so I pressed power and volume up. ... this takes me to the regular stock recovery.
Why not to CWM recovery? Did I do something wrong?
Thanks for any help
Hmm flash the recovery again, but from rom manager choose reboot to recovery, don't actually update in rom manager
Sent from my Nexus S using XDA App
bringonblink said:
Hmm flash the recovery again
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I guess that was the key ... when I flashed recovery again, and then chose to install the rom with all those options ticked, it worked!!!!
Am now using a custom rom ... THANK YOU!!!
Now to the Netarchy kernel ... again ... through CWM recovery I presume.
PS: I never expected a reply so soon ... thought you might be sleeping ... thanks again.
Paparasee said:
I guess that was the key ... when I flashed recovery again, and then chose to install the rom with all those options ticked, it worked!!!!
Am now using a custom rom ... THANK YOU!!!
Now to the Netarchy kernel ... again ... through CWM recovery I presume.
PS: I never expected a reply so soon ... thought you might be sleeping ... thanks again.
Click to expand...
Click to collapse
Thats alright was on my way to work , so on the phone with xda app xD.
Yup same deal again for kernel
Thanks pal ... really appreciate it!
Installed the kernel & google addons too!
All ok now except ... don't have Gmail why is that and how do I get Gmail?
Thanks again!
Paparasee said:
Thanks pal ... really appreciate it!
Installed the kernel & google addons too!
All ok now except ... don't have Gmail why is that and how do I get Gmail?
Thanks again!
Click to expand...
Click to collapse
Market
Sent from my Nexus S using XDA App
matt2053 said:
Market
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Ayeeeeeeeee
For some strange reason, when I go to the market from my PC, I see Gmail, but when I try to install, I get the message:
This item cannot be installed in your device's country!
If I go through the market on my phone, I just cannot find gmail although there is a lot of other apps that include the word gmail.
incidentally ... after flashing CM7, anything I try installing through my PC browser gives the same result as above...
By the way ... any reason why gmail is not included with the rom and with the google addons?
Gmail is in the usual Google Apps package. Maybe try flashing it again.
Paparasee said:
For some strange reason, when I go to the market from my PC, I see Gmail, but when I try to install, I get the message:
This item cannot be installed in your device's country!
If I go through the market on my phone, I just cannot find gmail although there is a lot of other apps that include the word gmail.
incidentally ... after flashing CM7, anything I try installing through my PC browser gives the same result as above...
By the way ... any reason why gmail is not included with the rom and with the google addons?
Click to expand...
Click to collapse
gmail is not available yet in some countries. what you can do is install marketenabler and fake your provider and install gmail.
on cm7, the google apps are not included as they are propriety apps, they are not open source ( if u understand what i mean)
a few years ago, google tried to sue cyanogen for distributing the google apps through cyanogenmod. they then reached an agreement that cyanogenmod could exist provided no gapps were included within.
Hey, thanks for that explanation ... let me check the work around
Hey! am back!
Rather than go through the the trouble of installing market enabler, I just went about testing a couple of other Roms ... since I also wanted to know in what way other roms were different.
I tried Liquid and Infinity ... both were nice and both had gmail, so was happier with them! Wonder why Google went after the cyanogen guys, but the others include those apps
Anyway ... am now downloading Zulu.
After having installed custom roms such as Cyanogen-mod, Liquid and Infinity, I've realized that there are some must haves ...
a) Gmail & Talk (working over 3G)
b) Sip over 3G
c) Power Controls in notification (sexy as in Liquid)
d) screen lock as in Cyanogen (the modded rotary type with an option to add a 3rd party app)
e) BLN support (have not yet got used to the small lights turning on as in BLN but, guess I'll learn).
Would some one know of a Rom that caters to the above ... I'm experimenting with each, but if someone can help, I'd be able to settle in faster
Cheers!
Paparasee said:
Hey! am back!
Rather than go through the the trouble of installing market enabler, I just went about testing a couple of other Roms ... since I also wanted to know in what way other roms were different.
I tried Liquid and Infinity ... both were nice and both had gmail, so was happier with them! Wonder why Google went after the cyanogen guys, but the others include those apps
Anyway ... am now downloading Zulu.
After having installed custom roms such as Cyanogen-mod, Liquid and Infinity, I've realized that there are some must haves ...
a) Gmail & Talk (working over 3G)
b) Sip over 3G
c) Power Controls in notification (sexy as in Liquid)
d) screen lock as in Cyanogen (the modded rotary type with an option to add a 3rd party app)
e) BLN support (have not yet got used to the small lights turning on as in BLN but, guess I'll learn).
Would some one know of a Rom that caters to the above ... I'm experimenting with each, but if someone can help, I'd be able to settle in faster
Cheers!
Click to expand...
Click to collapse
They went after Cyanogen because it is the biggest Most ROMS are based off of it too.
BLN is needed in the kernel, not ROM, Netarchys support this.
I think you will like NScollab, runs off of CM7 with some nice tweaks, also includes netarchys kernel as default.
Oh and it already has all gapps included , including gmail
What a coincidence ... was just downloading NScollab ... 28% done
Thanks!
bringonblink ... am liking this NScollab rom
Edit: Never mind ... googled and found ... no use to me
When I go to the market, I get a pop up asking me if I need to install some apps. Any idea what they do and if it is needed?
The apps are:
Google Chrome to Phone ... never heard of this
Google Goggles ... I know this and won't need it.
Kickback
Soundback
Talkback ... these are the 3 I have no idea about!
Click to expand...
Click to collapse
Thanks ... and cheers!
I start with a fresh wipe of my phone and then install BeanStalk with gapps (I'm currently using BS version 4.4.275 with gapps 20140105. Everything is fine for months. Then a couple of apps will start to crash a few times (the camera, dialer, browser and google apps). I've stopped using titanium backup and clockwork mod to restore my data because they were causing issues. Then the force closes become more and more frequent. I ran fix permissions and i have know clue if it helped or not. Then finally all hell breaks loose and everything begins to force close and give errors of no space left on phone. No launcher will stay open everything just bugs out. This seems to be an on going matter. It doesn't seem to resolve no matter what rom I run. I've gone through every folder sizing it and my phone is not out of space. I am getting very frustrated with my Infuse. I don't understand what some of the stuff means in my catlog file. If someone could help I'd greatly appreciate it.
i found out that Google+ and Google Drive might be the cause (such as when you upload or backup your photos to those clouds)
if you have time, go read those last 10 pages of BeanStalks, you will see what others have offered to resolve this issues
as for me, I'd do full wipe, specially format the sdcard0 (keep the Rom and Gapps to your SDcard1), and stop using the two Google services mentioned above. and use another Gapps (I am using the minimal one) Good luck!
Same problem with Unofficial CM 11.2 also
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Unable to get RSA prompt
Well I went ahead with a factory reset, installed Unofficial CM11_2 from Scott. Got the latest gapps from goo.im and phone seems normal again. But that is the expected behavior untill it starts acting up again.
I tried a lot to connect the phone through ADB and each time it remains unauthorized.
I tried on 2 different laptops, Windows 7, Windows Vista as well as Ubuntu - it always remained unauthorized and no matter what i tried ... changing USB ports , OS machines...nothing helped.
I never got the RSA signature prompt on my phone so could not do anything with ADB.
Any body has any ideas ?
hemen_kap said:
Well I went ahead with a factory reset, installed Unofficial CM11_2 from Scott. Got the latest gapps from goo.im and phone seems normal again. But that is the expected behavior untill it starts acting up again.
I tried a lot to connect the phone through ADB and each time it remains unauthorized.
I tried on 2 different laptops, Windows 7, Windows Vista as well as Ubuntu - it always remained unauthorized and no matter what i tried ... changing USB ports , OS machines...nothing helped.
I never got the RSA signature prompt on my phone so could not do anything with ADB.
Any body has any ideas ?
Click to expand...
Click to collapse
This has been an issue for a while, if the problem is showing up like this:
http://forum.xda-developers.com/showthread.php?t=2175261
Honestly haven't tried ADB with the newer stuff (namely Beanstalk), I just know that ADB as been a problem in the past for Scott's ROM's.
joel.maxuel said:
This has been an issue for a while, if the problem is showing up like this:
http://forum.xda-developers.com/showthread.php?t=2175261
Honestly haven't tried ADB with the newer stuff (namely Beanstalk), I just know that ADB as been a problem in the past for Scott's ROM's.
Click to expand...
Click to collapse
Yes, it is the same problem. Any suggestions ? How is the AOSP based Carbon ROM, any idea if it has the same issue too ?
hemen_kap said:
Yes, it is the same problem. Any suggestions ? How is the AOSP based Carbon ROM, any idea if it has the same issue too ?
Click to expand...
Click to collapse
Not sure about the other ROM's. I could go on a flashing journey, but I have two new devices I'm getting adjusted to right now. If you are not tied down to CM (don't know if it's your DD), I would suggest trying Carbon or CyanFox.
Me, I didn't need ADB that much at the time so I stuck with what I have. Not a solution, but I hope you find a ROM that works (partnered with a minimal gapps).
joel.maxuel said:
Not sure about the other ROM's. I could go on a flashing journey, but I have two new devices I'm getting adjusted to right now. If you are not tied down to CM (don't know if it's your DD), I would suggest trying Carbon or CyanFox.
Me, I didn't need ADB that much at the time so I stuck with what I have. Not a solution, but I hope you find a ROM that works (partnered with a minimal gapps).
Click to expand...
Click to collapse
Unfortunately the infuse is the only phone I have (so my DD)...but the lure to test the ADB on carbon is also compelling for me. Let me try moving to a non smart phone and try this out.
OK. So i installed the Carbon KK nightly, and encountered the same issue. adb devices always lists the phone as
0123456789ABCDEF unauthorized.
Also i never received the rsa prompt...
Moreover the device key seems to suggest it is some default value as compared to an actual device key.
Got it Working !!!
Ok so finally got it working.
I moved away from Scott's Unofficial CM11_2 on my daily driver and moved to Carbon ROM. Loving the new rom so far.
Once i moved to this ROM, I started adb on my desktop (adb kill-server, adb start-server) and was waiting
then on phone enabled Developer options and Android debugging over USB and connected the phone to desktop, and zingggg I get the RSA prompt.
One important thing it read is that you phone should be unlocked when you connect it to your desktop, so in case you have things like PIN or gestures that lock your screen....ensure that your screen is not locked when the phone is being connected.
Not sure if this was the issue or if it was the CM rom,,,but issue is resolved, I am loving Carbon...so not going back to CM to check the lockscreen theory....but worth a try for someone who is pulling his/her hair out like i was.
Ciao !!!
---------- Post added at 05:00 PM ---------- Previous post was at 04:41 PM ----------
missed mentioning that do not worry about the device id of 0123456789ABCDEF....i noticed it does not change for me even when adb connects properly.
It is the unauthorised state that needs to change to device.
What's the default launcher on Carbon, or does it give you a choice like Beanstalk?
Will be retiring the Infuse soon, so am thinking on what ROM to put on when I go to sell it (or give away). The requirement is that is not overwhelming to a new user. Cyanogenmod has a lot of customization, but it doesn't necessarily get in the way. I'd call it borderline overwhelming. Beanstalk is quite overwhelming, because you are forced to pick a launcher right from the beginning (even though I like it for the Jellybean qualities).
Because of these, I just may return it to stock, but have it rooted and with CWM.
joel.maxuel said:
What's the default launcher on Carbon, or does it give you a choice like Beanstalk?
Will be retiring the Infuse soon, so am thinking on what ROM to put on when I go to sell it (or give away). The requirement is that is not overwhelming to a new user. Cyanogenmod has a lot of customization, but it doesn't necessarily get in the way. I'd call it borderline overwhelming. Beanstalk is quite overwhelming, because you are forced to pick a launcher right from the beginning (even though I like it for the Jellybean qualities).
Because of these, I just may return it to stock, but have it rooted and with CWM.
Click to expand...
Click to collapse
I do not see any option to select a launcher like Scotts CM had. So i guess there is no direct option to select it.
Quick search in the running apps shows Launcher 3 running, and apk also available in the priv-app folder in rom, so can conclude launcher is Launcher3.
I did not find it overwhelming in any way.
-Hemen
hemen_kap said:
I do not see any option to select a launcher like Scotts CM had. So i guess there is no direct option to select it.
Quick search in the running apps shows Launcher 3 running, and apk also available in the priv-app folder in rom, so can conclude launcher is Launcher3.
I did not find it overwhelming in any way.
-Hemen
Click to expand...
Click to collapse
I flashed it last night (latest nightly), and it gave me the option of either Launcher3 or Google Now Launcher. I think if someone who was new to the device would be stumped a little by this, but would probably select the Google Now one (the question would be would they press once or always) and be done with it.
Having something recognizable runs at an advantage here compared to Beanstalk, where, unless you know CyanogenMod (or have played with a lot of launchers) you wouldn't know what to select. That would be overwhelming.
Anyway, I wiped the data again, breezed through setup (skipped everything but language and time zone), so it's all ready to go. If need be I can get them set up with a network and Google account before I throw them to the wind.
EDIT:
I see why I got the prompt ... I used the Paranoid Android micro apps package, which includes ... the Google Now Launcher.
hemen_kap said:
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Click to expand...
Click to collapse
Hi,
I was using CM 10.1 from Scott for like a year and didn't have any trouble at all, really the best ROM. Only had two small problems: wouldn't film on 720p without bugging, and MHL to HDMI was not working.
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Sent from my SGH-I997 using XDA Free mobile app
jloibman said:
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Click to expand...
Click to collapse
Not sure about this, but I think CM 11.2 is referred to as KitKat 4.4.4, which would be latest in the CM thread. So you are probably already running it.
Sent from my Asus MeMO Pad 8"
jloibman said:
Hi,
I was using CM 10.1 from Scott for like a year and didn't have any trouble at all, really the best ROM. Only had two small problems: wouldn't film on 720p without bugging, and MHL to HDMI was not working.
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Sent from my SGH-I997 using XDA Free mobile app
Click to expand...
Click to collapse
apart from the issues that i mentioned - my experience with CM 11.2 has been great. There are some obvious things like MHL etc that do not work, but those are known issues.
joel.maxuel said:
I flashed it last night (latest nightly), and it gave me the option of either Launcher3 or Google Now Launcher. I think if someone who was new to the device would be stumped a little by this, but would probably select the Google Now one (the question would be would they press once or always) and be done with it.
Having something recognizable runs at an advantage here compared to Beanstalk, where, unless you know CyanogenMod (or have played with a lot of launchers) you wouldn't know what to select. That would be overwhelming.
Anyway, I wiped the data again, breezed through setup (skipped everything but language and time zone), so it's all ready to go. If need be I can get them set up with a network and Google account before I throw them to the wind.
EDIT:
I see why I got the prompt ... I used the Paranoid Android micro apps package, which includes ... the Google Now Launcher.
Click to expand...
Click to collapse
You can download the Nova Launcher from the google play store if you want to have the same experience as with Scotts Beanstalk. I love the carbon ROM but I am so accustomed to the Nova launcher that I cant live without it.
hemen_kap said:
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Click to expand...
Click to collapse
OK the exact same problem has started again today on Carbon ROM. Wonder if this is a Cyanogen thing, as that seems to be common between the two.
Anyone else facing this ?
-Hemen
hemen_kap said:
OK the exact same problem has started again today on Carbon ROM. Wonder if this is a Cyanogen thing, as that seems to be common between the two.
Anyone else facing this ?
Click to expand...
Click to collapse
Hmm, don't think I kept a ROM on my Infuse long enough to encounter this problem (except for my several months with CM 10.1, no issues). As for other phones, I use Jellybean on my semi-retired HTC and did not have this problem (closest I came was when I tried out Fly-On mod - lag closures often). But I don't think It's a Jellybean problem.
I think (and this may have been covered already) this has to do with the piddly datadata partition filling up. One way to check is open a terminal emulator (app on the phone of adb shell) and type:
Code:
df
Look for datadata in that listing. If it is in the 90% range, that spells trouble. If that is the case, you could try one of two solutions.
I don't know what possessed the developers to separate the data partitions in KitKat (I know, for "performance reasons") but leave 1/2 a GB for it. Lower end phones these days give you twice that.
Over the past few years or so I've installed ROMs going back to ICS. 99% of the time there was absolutely no issue. I habitually do a (1) factory wipe, (2) dalvik wipe, (3) system format, (4) sdcard0 format, (5) install ROM zip, (6) install gapps, (7) wipe cache and (8) wipe dalvik.
In the hundreds of ROMs I've installed and tested, 1 or 2 were bad compiles, and everyone soon knew it. They were immediately removed from any host site. So, if you're having issues, (1) install you ROM as above, (2) perhaps install a smaller gapps, and/or (3) check that you're not overloading your phone from the PlayStore.
The last and rarest issue could be your phone, but rule of thumb that works 99% of the time is: (1) assume it's always your fault first, and (2) read, read, read, read, read.
Q&A for [ ROM ][ Apr 14 ] Stock Rooted YNG1TAS0YL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ ROM ][ Apr 14 ] Stock Rooted YNG1TAS0YL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
You are my savior!!! :angel: I tried all version and all methods to mount cm12 on multirom as a secondary but nothing works :crying:, nothing except your version!!!! :victory: As primary i have your cm11 XNPH05Q may depend on this?
Can you tell me the default read ahead buffer size, scheduler, tcp congestion Control??? Thanks
Me too, same problem, i install this rom as secondary on multirom, have you resolved in some way?
YNG1TAS0YL Radio - will it give access to FM radio???
Sir Calkulin, ive just flashed the cm12s stock rom manually, will the YNG1TAS0YL Radio help me access to FM radio? or is this somethin else.. In case this update does help me access FM radio then how do i go about it.. my device is unrooted with bootloader still intact..
I'm a noob so please help me out here..
nitsleo85 said:
Sir Calkulin, ive just flashed the cm12s stock rom manually, will the YNG1TAS0YL Radio help me access to FM radio? or is this somethin else.. In case this update does help me access FM radio then how do i go about it.. my device is unrooted with bootloader still intact..
I'm a noob so please help me out here..
Click to expand...
Click to collapse
What FM radio? They're is no hardware in the OPO for it. The radio referred to is the mobile phone radio.
hi, i'm not able to get rid of the developer options crash in the settings menu. It was a clean install, initially it works, as soon as I reboot starts to fc and never works. I didnt flash any super su zip.
A question about changing the temperature unit.
Thanks for this great rom.
Just a quick question on how to change temperature unit from Fahrenheit to Celsius?
Hello!
As reported in the downloadthread there is a problem with the developer options. I have tried two installs, one as update and a second clean one, the result is the same. Setings get a fc when choosing developer options.
Any solution to this?
Best regards!
I have installed this ROM everything is working, except from i can't find the email app (Boxer) nor can i go into the developer options it comes up with a error report.
Here's what i did when i installed CM12S:
In TWRP recovery mode I did the following:
-Wipe data
-Wipe cache
-Wipe Dalvik cache
-Wipe Internal storage
-Wipe System
-Format data
So after that, no OS is installed.
Then:
-Reboot to recovery
-Transferred your ROM Plus the zip files along with the radio files flashed both files to my USB
Then In recovery mode:
-Connected the USB Flash through OTG cable
-Went to Mount and ticked the OTG
-Went Back
-Selected Install zip and selected to install the rooted stock CM12S zip and then afterwards I flashed the Radio files zip of CM12S.
Then:
-Rebooted and after the boot of the device, I turned off the device and rebooted to recovery mode again.
Then:
-Wiped data
-Wiped Cache
-Wiped Dalvik Cache
-Wiped Internal storage
-Format data
Then I rebooted and after the device booted I left the phone 3-5 minutes to settle.
-Settings
-Backup and Reset
-Unticked the 2 boxes
-Reset device
I then let the phone boot up and left it to settle to let it run the background processes run for 3-5mins.
Should I use the Official ROM then re-root the Phone again or have I missed something?
I haven't used any custom kernels i used the stock one installed that shouldn't cause any issues should it?
Nor do I have the F2SP partition I just used the default stock one installed on the phone.
BootLoop
I flashed it, but i got bootloop.
My device is stock 05Q, Rooted, TWRP Recovery.
Why this problem happen?
Someone please help me. I really want this update...
Hi, I notice an problem, when i flash an kernel like a boeffla beta2 or AK 140 and reboot, when go to the developers options, the application settings crash, and the root don't work. For example when i open titanium backup it say i don't have a SU binary installed and the same thing also happens with other app require root. The procedure i use to flash a kernel is, do an wipe cache and dalvik cache, flash a .zip kernel and reboot.
What can i do for install an kernel without this problem?
Sorry for my bad english, i'm italian.
EDIT: the developers options crash also without the istallation of an kernel, when i reboot the phone for the first time after the os12 flash the developers options crash.
so we can flash it as we do for the OTA or we should have a costum recovery ?
So just to be clear, I flash:
1) the ROM
2) the Extras
3) Reboot and we're good to go?
Missing Boxer
I too flashed this OTA ROM and am missing Boxer. The stock email was wiped away but nothing to replace it but Gmail. Tried flashing again and still nothing. Developer working fine for me. Any ideas?
Hi!
I have two very noob questions.
First:
Can i make clean install, whit keep my personal data, my app locations in the home screen and more.... ( I think no )
Second:
What does it mean "FC"? I am not an English pesron but i try to search that and I think this is not mean " finger cross, or football club..... ;-D"
RZeeyy said:
Hi!
I have two very noob questions.
First:
Can i make clean install, whit keep my personal data, my app locations in the home screen and more.... ( I think no )
Second:
What does it mean "FC"? I am not an English pesron but i try to search that and I think this is not mean " finger cross, or football club..... ;-D"
Click to expand...
Click to collapse
First: No - you'll have to install apps from scrartch, or use something like Titanium Backup or Helium if you want the data kept (not system apps though)
Second: FC = Force Close
Calkulin cm12s settings FC when going to dev options (seems to work)
Hi everybody, i had problems with access to developer options (integer causing com.android.settings crash) and thanks to GenghisZ's answer, i was able to repair this error without flashing rom again.
I have looked in /etc/init.d at 99firstboot you mentioned
I have moved file 99firstboot to another folder to disable it at startup
As it was creating persist.sys.root_access (with a '3' valuethat was causing the error?) in /data/property, i have also moved this file somewhere else.
After that, i have rooted it manually and it seems to work well.
I hope it can help other people... If you have this problem maybe we can try this.
I'm not a developper but i know linux a little.
Thanks for amazing site and read you soon