Database Info

(update 21/07 5pm) JACHeroSKI FULL 32B Fully Working (Any dream ROM :))

Hi,
Sorry if I'm wrong,
But thanks to NK02 mentioning in a thread to make one small change to boot.img ramdisk I now have JACHero 2.7.3 fully working (WIFI Bluetooth & FAST!) on my Magic 32B.
I used the normal update.zip from the dream forum, and extracted and changed the boot.img and flashed it in fastboot.
Heres the boot.img to save you making the change as well
http://www.megaupload.com/?d=R8OX15W1
I had also previously partitioned my sd card to have an ext2 and swap partition, all of which have been set up automatically so I know the boot.img is working as intended.
Very happy bunny now
UPDATE:
Seems to work for some. Having your SD card prepped with 3 partitions helps a lot.
Speed is going to be slower than say the NK02 Cyano ROM, but thats down to Rosie and the limited RAM, don't think we'll ever get that perfect.
At least now we know a way to use Dream Roms easily (sorry 32A owners, I think K4R1M will have something for you later)
UPDATE 5PM
i just used same method on cyanogens latest rom and works perfectly

Sounds real nice :> What about the gyro/compass ? Doesnt seem to work for me when using the original JACHero 2.7.3

Running well after 1 hour, widgets all stock not removed any and NO rosie reloads.
Little bit of lag, but nothing terrible (and for me to say that means it is hardly there!)
Anyone else tried it? I want to rule out me doing something silly
Compass working (at least in sky map)

Hi Again
Trying to set-up my sd card paritions, but parted command in adb shell is not working (not found error). Do I need a particular recovery image to be able to use parted ?
Thanks!
dazcox5181 said:
Running well after 1 hour, widgets all stock not removed any and NO rosie reloads.
Little bit of lag, but nothing terrible (and for me to say that means it is hardly there!)
Anyone else tried it? I want to rule out me doing something silly
Compass working (at least in sky map)
Click to expand...
Click to collapse

i dont think there is a magic recovery with the parted command. thats why i used a Gparted live usb boot (google unetbootin - will create a bootable usb stick for you) and a card reader in my netbook (yes I use a MSI wind with OSX )

well done dazcox.
can you please describe the process people need to take to load up boot.img?
eg. recovery screen, wipe, flash G1 ROM, reboot, let ROM load, reboot into fastboot, flash boot.img,.. and the required commands etc.
might be annoying, but it'll help to answer the flood of questions that your answer has brought
presumably as each new ROM produces changes we will need to edit the boot.img each time, as they may contain updates, yah?

Yes, I would assume each time new release we make the change.
My Process was this.
download the scripts from http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images
(beware if on OSX google and download newer cpio utility and copy to /usr/bin)
Download JAChero 2.7.3 full from dream forum
rename downloaded file to update.zip and copy to sd
on computer open update.zip and extract boot.img
Use unpack-bootimg.pl boot.img to extract the kernel and ramdisk
in the ramdisk dir rename init.trout.rc to init.sapphire.rc
repack-bootimg.pl boot.img-kernel.gz boot.img-ramdisk boot1.img
On your phone reboot to recovery (I use amon ra recovery from this forum)
BACKUP (nandroid is your saviour)
wipe
apply update.zip
reboot, but go straight to fastboot (vol down + power)
in fastboot
fastboot flash boot boot1.img
reboot
enjoy
*decide you want to try something else and start all over again*

For me who already have JACHero 2.7.3 installed with the cyanogen kernel, can I just flash the boot.img or do I need to make a complete wipe and include it into the update.zip?

zw4mp said:
For me who already have JACHero 2.7.3 installed with the cyanogen kernel, can I just flash the boot.img or do I need to make a complete wipe and include it into the update.zip?
Click to expand...
Click to collapse
I would rather use the full update.zip and then flash the boot.img to be sure.
Sorry - I'm learning as I go and don't know how to sign an update.zip yet

@ dazcox5181
can you make a working update.zip for us?

jan.lamp said:
@ dazcox5181
can you make a working update.zip for us?
Click to expand...
Click to collapse
I might later, probably not though, as it's really easy to do.

I've followed the steps, and after flashing the boot1.img adn rebooting, the phone is really taking forever.
The screen is totally dark but i know the phone is on as i can enter through adb to it.
Any tips?
I had from before a class 6 card with 3 partitions, FAT, ext2 and swap (in that order).
Thanks

did you wipe/flash the normal (not ported) jachero rom first?
Then fastboot flash the boot.img?

Yes please +1
jan.lamp said:
@ dazcox5181 can you make a working update.zip for us?
Click to expand...
Click to collapse

+2
That would be fantastic for those of us that I are still on the steep part of the learning curve...
Cheers
Ben

Signing and uploading update.zip now...
When I get my paypal sorted you all owe me a beer!
I'm flashing it myself to be sure, upload will be done in about 20min then i have to do some work.
My update_signed.zip failed, can't find update script error.
Anyone help? the only file I changed was the boot.img?

dazcox5181 said:
Signing and uploading update.zip now...
When I get my paypal sorted you all owe me a beer!
Click to expand...
Click to collapse
With the new update all predone all that needs doing is the partitioning of the sd card to be fat32 + ext2 then update rom in normal way, correct?

dazcox5181 said:
I would rather use the full update.zip and then flash the boot.img to be sure.
Sorry - I'm learning as I go and don't know how to sign an update.zip yet
Click to expand...
Click to collapse
I decided to try just flash the boot image before redoing it all to see what would happen, and it is actually working Wifi and gyro didnt work before but is now.
The only thing is that Bluetooth A2D2 mode (playing music) doesn't seem to work. It says "playing media through bluetooth headset" but I get no sound. Can anyone confirm that this is working for you? If so maybe I will need to wipe and reinstall anyway.

stevetigersix said:
With the new update all predone all that needs doing is the partitioning of the ad card with an ext2 then update rom in normal way?
Click to expand...
Click to collapse
That will be the plan, if i can get the update.zip to work

dazcox5181 said:
That will be the plan, if i can get the update.zip to work
Click to expand...
Click to collapse
Sweet looking toward to it daz, now all I've got to do is pluck up the bottle to root and partition the ad card then install your Rom , I'm new to this on android lol

[RECOVERY] ClockworkMod Recovery for the Epic 4g! Permament Method! FINAL! FIXED!

thanks to skeeterslint, koush #sgs-dev , #samsung-epic , #sdx-developers
tester: me, skeeterslint, raiderep
based on koush's clockworkmod 2.5.1.0
new one click with root and recovery: http://forum.xda-developers.com/showthread.php?p=7933592#post7933592
download: http://www.sdx-downloads.com/devs/noobnl/one.click.clockworkmod2.5.1.0-flasher-fixed.zip
1. you need samsung galaxy s drivers
64-bit OS http://firon.net/xda/usb_drivers_GalaxyS_x64.zip
32-bit OS http://firon.net/xda/usb_drivers_GalaxyS_x64.zip
2. push MENU, select Applications > Development, then enable USB debugging.
3. extract and run runtryfirst.bat or runtrylast.bat
4. enjoy!
update.zip method:
1. boot into ClockworkMod Recovery
2. Apply : http://www.sdx-downloads.com/devs/noobnl/clockworkmod2.5.1.0update-fixed.zip
known issues:
adb reboot recovery quickboot boots to stock recovery
workaround:
while phone is off, hold vol down and camera button, then power on the phone
change log:
fixed in build 30: system doesn't unmount
fixes in build 31 incompatblilty with build 30 and di07 kernel
32 fixes added mount rw to the script, thanks bubby!
2.5.1.0 based on koush recovery and fixes the keys!
final fixed! forgot something to add to the scripts!

Yeah...I'm on this..thanks
Sent from my SPH-D700 using Tapatalk

Link is down.

dondadah88 said:
Link is down.
Click to expand...
Click to collapse
Awww...damn....lol. I was about to kick the wifey off the computer...lol
Sent from my SPH-D700 using Tapatalk

uploaded!..

This is something I'm looking for.

It says 0 btyes. and when you open it there's nothing there. lol.
i'm excited.

Oh and that link seems to be down.

miror: http://www.mediafire.com/?b66a2yak832uw20

thanks for the mirrir. downloaded and installed.

how do we boot into the recovery??? using quick boot goes into samsung's recovery...

while phone is off, hold vol down and camera button, then power on the phone

What functions work?

rjmjr69 said:
What functions work?
Click to expand...
Click to collapse
Well Backup works. i dont know what else?

I ran the bat file and everything but my phone still hasn't restarted yet...wtf.

What does this allow us to do? Please answer before I do this?

Backup and restore work fine for me. After the game I'll see if I can get a rom flashed but football > epic atm.

wjohnson1186 said:
What does this allow us to do? Please answer before I do this?
Click to expand...
Click to collapse
Backup everything and flash custom roms.

davidrules7778 said:
Backup everything and flash custom roms.
Click to expand...
Click to collapse
Can you explain how this is done? When I run the files does it copy what is on the phone to the computer so that I can just re-image it back onto the phone?
I maybe asking questions, but I really don't know what I am doing and want to be safe. I already have the one click flasher by noobnl, I trust him. I just want to be sure and understand what I am doing.
Thanks for all the info.

wjohnson1186 said:
Can you explain how this is done? When I run the files does it copy what is on the phone to the computer so that I can just re-image it back onto the phone?
I maybe asking questions, but I really don't know what I am doing and want to be safe. I already have the one click flasher by noobnl, I trust him. I just want to be sure and understand what I am doing.
Thanks for all the info.
Click to expand...
Click to collapse
No it saves under clockwork mod on the sd card in 3 convenient files. So when u flash a custom rom u can run restore and it will restore all your files and data.

[ROM](Working Update.zip) -> Defy Update.zip Cookie Cutter Rom

Defy Froyo 3.4.2 Cookie Cutter Rom​
Q. How Do I use the Update.zip?
A. Go to Market & Download Defy SD-Recovery & Install..
1. Next place the Update.zip on the /sdcard via PC
2. Turn on MoTo Phone Portal ( SD-Recovery is SD Based so you need to Turn Off USB Mass Storage )
3. ADB Debugging does not have to be Turned Off on my version
Once Booted into the Recovery apply the update.zip
wait a few minutes & it should be done...
Please Reads the notes I left in the Update.zip if you build a Custom Update.zip, this will save you trouble down the road.
What's Flashed?
A. Boot.img
B. dev_tree
C. Moto Blur 3.4.2 Rom ( Yes I know it's not the latest, built off what I had )
D. UNO & TMO-TV Removed
E. Rooted ( SU & Superuser )
F. Busybox Installed to xbin
G. Rest of Rom is stock
Once installed, remove eugene.apk from /system/app ( Old boot strap that need adb turned off before rebooting / defy sd-recovery does not have this issue)
Q. I Edited the update.zip & Now it fails verf. in recovery when trying to flash!
A. example of signapk on signing the edited update
java -Xmx1024m -jar signapk.jar -w testkey.x509.pem testkey.pk8 update1.zip update.zip
Download: Original Post

To Update other parts of the Phone: Add this to the update-scripts for what you are flashing.
If we had all these Parts from 2.1 we could go back.
package_extract_file("lbl", "/tmp/lbl");
write_raw_image("/tmp/lbl","lbl");
delete("/tmp/lbl");
package_extract_file("device_tree.bin", "/tmp/device_tree.bin");
write_raw_image("/tmp/device_tree.bin","devtree");
delete("/tmp/device_tree.bin");
package_extract_file("cdrom", "/tmp/cdrom");
write_raw_image("/tmp/cdrom","cdrom");
delete("/tmp/cdrom");
package_extract_file("logo.bin", "/tmp/logo.bin");
write_raw_image("/tmp/logo.bin","logo.bin");
delete("/tmp/logo.bin");
package_extract_file("umts_wrigleyref_build.bin", "/tmp/umts_wrigleyref_build.bin");
write_raw_image("/tmp/umts_wrigleyref_build.bin","bpsw");
delete("/tmp/umts_wrigleyref_build.bin");
package_extract_file("cdt.bin", "/tmp/cdt.bin");
write_raw_image("/tmp/cdt.bin","cdt.bin");
delete("/tmp/cdt.bin");

Hey eugene,
Glad to see you working on Defy too
I think this will be major help for developers and btw that 3.4.2 version did you used? since there are many of them.
Thanks.

um. 107 I think since it has a floating update.zip someplace & sbf.
Ill update to the latest when I start building roms
Sent from my MB525 using XDA App

i don't understand. is the boot.img still the signed cg35.smg?
if so, can't we just use the cmw to do that?
can you post more detailed chages you made over cmw?
other than the signapk and usb debugging described.
many thanks.

eugene373 - great work!
racca said:
i don't understand. is the boot.img still the signed cg35.smg?
if so, can't we just use the cmw to do that?
can you post more detailed chages you made over cmw?
other than the signapk and usb debugging described.
many thanks.
Click to expand...
Click to collapse
Same here, i'm pretty interested in more details, thank you

this Zip File is for what ?
Thanks
Greetings

you can not use cwm due encryption. If you dont know what an update.zip is stick to nandroid...
This is for rom builders.
Heading out, when I get home ill make it clearer.
Though, now that I think about it cwm might be fine due to the nature of how it works.
Ill test later and let everyone know
Sent from my MB525 using XDA App

So we are able to install updates via the "normal" Motorola Recovery mode? So we are able to get a "unbrickable" Defy?
Edit: got it myself. The ZIP File won't be recognized by the motorola recovery... anyway thanks for your job

Now, what can SD-recovery do? Can it write other partitions, like cdt.bin?

Simplestas said:
Now, what can SD-recovery do? Can it write other partitions, like cdt.bin?
Click to expand...
Click to collapse
Yes. I can add the string if you would like
eugene373 said:
To Update other parts of the Phone: Add this to the update-scripts for what you are flashing.
package_extract_file("lbl", "/tmp/lbl");
write_raw_image("/tmp/lbl","lbl");
delete("/tmp/lbl");
package_extract_file("device_tree.bin", "/tmp/device_tree.bin");
write_raw_image("/tmp/device_tree.bin","devtree");
delete("/tmp/device_tree.bin");
package_extract_file("cdrom", "/tmp/cdrom");
write_raw_image("/tmp/cdrom","cdrom");
delete("/tmp/cdrom");
package_extract_file("logo.bin", "/tmp/logo.bin");
write_raw_image("/tmp/logo.bin","logo.bin");
delete("/tmp/logo.bin");
package_extract_file("umts_wrigleyref_build.bin", "/tmp/umts_wrigleyref_build.bin");
write_raw_image("/tmp/umts_wrigleyref_build.bin","bpsw");
delete("/tmp/umts_wrigleyref_build.bin");
package_extract_file("cdt.bin", "/tmp/cdt.bin");
write_raw_image("/tmp/cdt.bin","cdt.bin");
delete("/tmp/cdt.bin");
Click to expand...
Click to collapse

eugene373 said:
Yes. I can add the string if you would like
Click to expand...
Click to collapse
CwM can do exactly the same afaik, i've already made quite a few update.zip with it.
after reading all your notes, do you actually mean that we can't use format on those patitions?
if you do, well, i learned it the hard way, and delete_recursive also works for me.
thanks for putting up an excellent example if not for anything else, it's much needed.

racca said:
CwM can do exactly the same afaik, i've already made quite a few update.zip with it.
after reading all your notes, do you actually mean that we can't use format on those patitions?
if you do, well, i learned it the hard way, and delete_recursive also works for me.
thanks for putting up an excellent example if not for anything else, it's much needed.
Click to expand...
Click to collapse
Correct, you can only format with the stock recovery ( Hence the reason why I used the Stock Recovery ) any Partition with cwm recovery will cause a non-booting system..
regarding cwm I've not tested it, so Likely it will work.. Steven is still working on the cwm recovery & there is no point in me adding another cwm bootstrap recovery... Mine is just pure stock & works perfect.
I'm still weeding through the /bin /etc file's to find exactly what needs left...
but main goal was to provide an example of what is needed to make an update.zip with out breaking the system.

what exactly is the benefit of this new method?

drsouly said:
what exactly is the benefit of this new method?
Click to expand...
Click to collapse
um? Your joking right!
Update versus a nandroid, I would have thought it was a no brainier....
Build & edit roms on the fly + being able to flash boot.img & downgrading is fine without sbf unless you screw up completely..

eugene373 said:
um? Your joking right!
Update versus a nandroid, I would have thought it was a no brainier....
Build & edit roms on the fly + being able to flash boot.img & downgrading is fine without sbf unless you screw up completely..
Click to expand...
Click to collapse
ok now i got it thx

drsouly said:
ok now i got it thx
Click to expand...
Click to collapse
no problem, wasn't sure if you was being a smart-ass or honestly didn't know...
either way, sorry If I offended you.
~Eugene

I didn't understand yet . I can or not apply the update file using stock recovery?
EDIT: forget I understood now.
Sent from my MB525 using XDA App

psicodelico said:
I didn't understand yet . I can or not apply the update file using stock recovery?
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
Read OP.... Download Defy SD-Recovery from Market

Yeah, I read again slowly and understood.
Sent from my MB525 using XDA App

[MOD][Update: 12-Aug-2011]Rooted CG from CH Leak

Thanks to dangpzanco for the GREAT IDEA.
I finally got my Rooted GB working here. I can't provide a download link now but I'm going to do it later for sure.
Apparently there was a final signature check that was done somewhere after mounting the cache partition, preventing me from booting with a pure update.zip on top of froyo /system. Thanks to dangpzanco I could bypass it and get root.
Quick Guide (requires froyo, root and Droid2bootstrapper):
1. Download fixed SBF bellow. It's made from the CH leak containing ONLY: CG35.smg (boot) CG47.smg (recovery) CG61.smg (devtree) firmware.hmg (header) RAMDLD.smg (flash updater).
2. Download root_and_recovery.zip and copy it to SD Card.
3. Download full leaked SBF from General Forum (CH, signed) and use MotoAndroidDepacker to extract all images.
4. Copy the CG39.smg to /sdcard/
5. Boot into CWM
6. From CWM open adb shell and use this command: dd if=/sdcard/cg39.sm of=/dev/block/system
7. Still on CWM apply root_and_recovery.zip
8. Still on CWM wiped everything
9. Boot on bootloader and flash fixed SBF
10. Reboot

I actually did the same thing! I read it somewhere in one of the topics. I installed Defy BootMenu instead of CWM. Works great! Right now I've almost removed all the Chinese crap and got the GApps working (from CM7).
I also removed the Blur items for the Chinese SN's. I'll see if I can get Twitter and Facebook working with it.
2nd-init would be nice too actually. Does the method provided in the other thread work with this ROM?
Edit: the instructions were indeed from dangpzanco!

And right now I found a possible bug. My camera doesn't work. Everything is black and stays black. Photo's are take as they should however.
Can you check whether you have the same issue?

w0ndersp00n said:
And right now I found a possible bug. My camera doesn't work. Everything is black and stays black. Photo's are take as they should however.
Can you check whether you have the same issue?
Click to expand...
Click to collapse
Here it works fine. Have you tried to edit /system/build.prop?
Change device from ME722 to A953.

Yes, I changed it to A953...
Maybe I have deleted something that was necessary for the viewfinder... But what xD
Edit: Allright, nevermind. Somehow a reboot fixed it :-D On to the next step

Something bad happened when I tried to apply 2nd-init on this. The phone rebooted just after 2nd M logo not allowing me to get into CWM. Wierd, since CWM should take place before 2nd-init. Will need to raflash froyo and start over. We should find a way to root Gingerbread without CWM to make things faster.

That's odd indeed. I have to say, I think the CWM method of rooting is actually quite easy. For SuperOneClick I need to get my PC/laptop out every time and with the update.zip I can do it as I please.
I really hope you'll succeed wit 2nd-init. If you need help, just shout! Today and tomorrow I have enough time.
I'll make a nandroid of my current setup, so I can continue trying out stuff.

w0ndersp00n said:
That's odd indeed. I have to say, I think the CWM method of rooting is actually quite easy. For SuperOneClick I need to get my PC/laptop out every time and with the update.zip I can do it as I please.
I really hope you'll succeed wit 2nd-init. If you need help, just shout! Today and tomorrow I have enough time.
I'll make a nandroid of my current setup, so I can continue trying out stuff.
Click to expand...
Click to collapse
Yeps, it is easy indeed, but to do it I need to SBF froyo before installing GB again. In other words if I mess up the phone I will need to flash 2 versions instead of one. That's why it would be easier to flash just GB.

Hey there, nice I could help.
I think you could copy the /dev/block/system back after rooting and build the SBF with it.
@Milestone 2 (Finnaly on Gingerbread!)

dangpzanco said:
Hey there, nice I could help.
I think you could copy the /dev/block/system back after rooting and build the SBF with it.
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
I tried that with froyo but it didn't work.

you can try also this defy leaked gb rooted nandroid backup.
http://www.multiupload.com/SPZ8SIEC60
version 4.5.1-134 multilanguage.
use fixedsbf from new leaked milestone2 rom and milestone2patch from MS2Ginger thread.
In this rom /system/app/kpilogger.apk cause battery drain so delete it after install.

Something is seriously wrong... My backlight never shuts down. It's black, but when it's dark you'll see it's still on!
I actually can't change the brightness from settings. So I did a complete reinstall and the problem persists!
I'm using brightcontrol app now to adjust the brightness, but does anyone else has this issue? Or is it something I did?

r2beta0 can you please upload the nandroid of your system?
I try to get adb in CWM but it didn't recognize it.

julianlatasa said:
r2beta0 can you please upload the nandroid of your system?
I try to get adb in CWM but it didn't recognize it.
Click to expand...
Click to collapse
My system is messed. I still need to get 2nd-init to work. I'm having a lot of trouble trying to compile my custom version of logwrapper hijack. As I don't have experience in compiling stuff to ARM/Android it is being a pain in the a**. I'd appreciate some help here

Try setting up a QEMU environment with the GB leak kernel's zImage.
Edit: Now we can port CM7!!! Devtree.img is now signed.
@Milestone 2 (Finnaly on Gingerbread!)

dangpzanco said:
Try setting up a QEMU environment with the GB leak kernel's zImage
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
And how do I do that?
I tried some ways till this point:
- Installed CodeSourcery G++ Lite toolchain (could compile, but android didn't run)
- Installed NDK and tried some commands I could find on blog posts (no luck)
- Now I just finished setting up an ubuntu 10 VM with all the steps described on developer.android.com. I think I am now able to compile android system, but I don't want to as it will take a LOOONG time.
Do you know how do I build a specific module into android source? For example:
system/core/toolbox
I'm a developer, and have compiled stuff to run on linux/unix many times. But this ARM stuff is way complicated. Writing the code isn't the problem, but compiling is. Lots of flags I haven't seem before, and so on.

r2beta0 said:
And how do I do that?
Do you know how do I build a specific module into android source? For example:
system/core/toolbox
Click to expand...
Click to collapse
I just uncovered this answer by myself.
A 'make toolbox' on root folder seems to work just fine. Now I need a way to define new targets on android build system.

http://and-developers.com/
Has a page just for compiling the kernel from source. (I can't remember the link)
I also got stuck when trying to compile from AOSP... but I think you need to have ALL the files downloaded from source (specially the big prebuilt folder) even if you want to compile a single binary.
Well I'm not sure of anything...
Edit:Now I read what you wrote... so never mind you got it.
@Milestone 2 (Finnaly on Gingerbread!)

dangpzanco said:
http://and-developers.com/
Has a page just for compiling the kernel from source. (I can't remember the link)
I also got stuck when trying to compile from AOSP... but I think you need to have ALL the files downloaded from source (specially the big prebuilt folder) even if you want to compile a single binary.
Well I'm not sure of anything...
Edit:Now I read what you wrote... so never mind you got it.
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
Yeps I've made a full repo sync. It took 3 hours and is worth 6GB disk space

Great news! Can't wait to see a true custom ROM working
Just thought I'd share what I've learned: don't mess too much with your build.prop Somehow my modifications were the reason of my backlight not working right and making every app crash that wanted to use a sensor. But it's working again

Fastboot + Recoveries (My Gift To You)

You can get it from here:
Fastboot + Recoveries.7z
I decided because it get's a little tad difficult to find what you might want or need for Recoveries and Fastboot, (I had a B**** of a time myself )
I'd thought it would be nice to offer my assitance, (because I haven't done a d**n thing to contribute since I bought the Q )
So here's a list of nice things I elegantly made for you (Don't ban me mods :angel: :fingers-crossed: )
*What To Do*
For A Little Assistance:
Linux: go to folder and "Right Click" Click on "Terminal/Konsole"
Type "su" (without quotes)
Then copy/paste any of the following (not anything in parentheses)
fastboot flash recovery open_recovery.img (Open Recovery's Mod) (Skrilax_CZ)
or
fastboot flash recovery cwm.img (Clockwork's Mod) (Shabby Penguin)
or
fastboot flash recovery twrp.img (Team Win Recovery Pro) (arrrghhh)
or
fastboot flash recovery recovery.img (Stock Recovery Image) (dunno)
Windows: Go to folder and press "SHIFT and Right Click" run command window (or something close to it)
Then any of the upper ones
Mac: I don't know how to use it, but hey it's here.
Oh yeah thanks to falln Saint, I have my favorite boot logo
It's an android popping it's head out on the Moto with the phone name underneath
fastboot flash logo moto.img
Hope I helped, Have fun :good:
SYKKNYZZ
P.S. I only made it easier to find the files, I didn't create them.
Real credit goes to the members on XDA who work their a** off to help us out. :highfive:
P.P.S. I don't come here often, but if there is any problems, I will answer them as fast as i can.

Why not just link to the thread, where you got the recovery? Including them all in one big .7z file doesn't make a lot of sense - if TWRP or OpenRecovery are updated, that .7z file you have is now outdated...
Just a thought - interesting to see the stock recovery tho!

True
arrrghhh said:
Why not just link to the thread, where you got the recovery? Including them all in one big .7z file doesn't make a lot of sense - if TWRP or OpenRecovery are updated, that .7z file you have is now outdated...
Just a thought - interesting to see the stock recovery tho!
Click to expand...
Click to collapse
Thanks arrrghhh, I just thought to make this simple as possible.
But I do like what is going on with the new roms, I have AOKP because Carbon kept glitching on me and deleting my savedata and setting it under a folder called 0

SykkNyzz said:
Thanks arrrghhh, I just thought to make this simple as possible.
But I do like what is going on with the new roms, I have AOKP because Carbon kept glitching on me and deleting my savedata and setting it under a folder called 0
Click to expand...
Click to collapse
This isn't a glitch, it's a "feature" with 4.2.2.... Unfortunately the more 4.2.2 ROM's you flash, the more this feature will become apparent.

arrrghhh said:
This isn't a glitch, it's a "feature" with 4.2.2.... Unfortunately the more 4.2.2 ROM's you flash, the more this feature will become apparent.
Click to expand...
Click to collapse
Yeah I realized that, but Unicorns are for Gangsters.
And I might go back to carbon, if it didn't delete my info even when I reboot normally after flashing. But thanks for your hard work.
Any way I can be a beta tester for any upcoming products?
I am staying a Q Fan until next upgrade on my contract thru sprint
Sent from my Asanti C using xda app-developers app

I had about 7 "0" folders when I browsing my phone's files looking for a cache'd boot logo...it was like one of those russian dolls with a smaller and smaller doll inside and could not figure out what the heck was going on, lol. Ended up deleting all but the first parent and didn't seem to cause any issues....free'd up a good gig or two of internal storage space! Good to know now what the cause of this was as I was experimenting with a lot of different recoveries around the time this happened. Thanks^^

Argh! I came to this thread hoping for a nice, organized place to find all the links/downloads I needed to fix my girlfriends phone.
Now I have to read, AND continue my search for the files. (mild sarcasm)