Hi. I have a problem. I tried to flash Rogers stock 2.2 to my Cappy with Odin (non oneclick) and it buggered up, so I'm reflashing to the stock AT&T 2.1 OS, which also wont work. It hangs at Master Clear (if I click that, but it also hangs at File Analysis). I don't really know what else I can do, because currently my phone doesn't work at all. Any ideas?
What i did was flash with odin 1 click without the master clear, then i plashed the rogers stock odin file. sadly i still get the att splash screen.
Unplug the phone first. Run odin as administrator. Hold both volume buttons while plugging in the USB cable. Keep holding the buttons until you see the display indicate that the phone is in download mode. Flash. Hope it works.
Related
My phone will not turn on. I was doing a factory reset, but it seemed to freeze, so I did a battery pull. Now my phone is either stuck on the samsung logo, or an empty batter symbol with a white circle. Please help.
Only thing I can think of is to try to get into download mode (remove the battery, plug the phone into a computer, and press the volume down button). If you can get to download mode, you should be able to flash a stock rom via Odin (instructions for this can be found in multiple threads on this forum.
Sent from my voodoo froyo Mesmerize
Mesmerizeuser said:
Only thing I can think of is to try to get into download mode (remove the battery, plug the phone into a computer, and press the volume down button). If you can get to download mode, you should be able to flash a stock rom via Odin (instructions for this can be found in multiple threads on this forum.
Sent from my voodoo froyo Mesmerize
Click to expand...
Click to collapse
Yes, do that.
download odin and the stock 2.1 build. then place your phone in download mode. flash the rom the way the instructions tell you too. then walk into your local uscell and complain til they give you a new mesmerize. that should solve all your probs
Got mine to reboot
i got my samsung mesmerize to turn on by pressing in the startup button on the right AND the volume control button on the left (up, don't know if that matters) at the same time for a few seconds (at least 5) and eventually the SAMSUNG logo appeared and it is now working fine.
I hope this helps anyone who has the same issue!
lately EVERY time i reboot my phone (running ics build 2, 3 and 4, stock kernel) it gets stuck on samsung logo.. somehow my phone will only boot into the frigging cm7 recovery which as im sure youre all aware is rather useless to fix any problems im having in ics and leaves me unable to flash, backup, or restore anything. it's quite frustrating and i have no idea how to fix it but by going back to bml, re-partitioning, then odin ei20 modem, cm7 fixed recovery, then flash back to ics but doin this every reboot it getting very tedious..
ive read about recovery loops, but the fix doesnt work for me as i cant mount the ICS /system partition in cm7 recovery...and ive been all over trying a zillion things to get it to work and havent pulled dmesg or logcat but if someone thinks it would be useful ..i wish i knew why EVERYTHING is great, then BANG, reboot and it's FML city.
This is for the people who got a new captivate through return or purchase or how ever you obtained it. If you tried flashing a new rom and now are stuck at the att boot loop or the battery loop and your phone will not boot up here is help.
1. See if your phone will do the 3 button recovery to get into download mode.
2. If you cant get into download mode you might need a Jig or do the resistor technique to get into download mode.
3. See if this odin (I897UCJF6-final-OCD-REV0.exe) will flash your phone back to the stock 2.1.
4. If after flashing the 2.1 odin and your phone still has boot loop then try the 2.2 stock odin
5. Next do the same as previous but try with this odin (I897UCJI6-OCD-REV02-Low-designgears_1_.exe) which is the 2.2 stock odin.
Note all of these flashes require you to be in download mode and have odin fired up on your pc the plug in your phone so odin can recognize it so
a. be in download mode (not connected to PC)
b. have odin open on pc
c. Plug in phone to pc and start odin.
odin likes to stop flashing when setting pit file so if it freezes give a sec and if nothing try it again.
if odin freezes on the set pit file your phone will have the dreaded phone to pc icon during boot but dont panic set your phone into download mode and try again.
If any questions should arise PM me or leave a comment and others and i will try and help.
Took me two days to fix my phone after flashing to stock to root it but i hope this helps you turn your 400 dollar paper weight back into a phone.
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
i ran into this a few days ago while trying to root a friends captivate(1008) purchased from walmart recently. after trying to flash back to stock i was stuck on att boot loop and could not get into download mode via button combo to save my life. tried everthing minus a jig....after getting fed up with it, i sat it aside. to my amazment, after about 10-15 minutes the mf booted up. i had to use adb to reboot into download mode. flashed with odin(from aio toolkit) back to 2.1. everything worked fine, no problems except for one thing...sometimes it will still loop for a few minutes before it boots...sometimes it boots right away. Im still investigating the whole ordeal but my point here is: if you think your phone is stuck on att screen, just let it sit for a while....maybe a long while. and it should boot. then use adb to get back to download mode. i read every forum post on the web about this issue...just found this thread and thought id give ppl a heads up. hope it helps
I'm stuck in a bootloop right now on the Galaxy S animation screen and this wipe cache and data method doesn't seem to work for me.
so i recently tried flashing a darky rom theme onto my captivate running mosaic 8.
it worked the first time. then i tried another theme didnt like it, so flashed the darky rom one, and now, bootloop....
i can get my cappy into download mode, but odin doesn't recognize it.
i cannot get it into recovery mode with holding down the volume up and down and power button.
i need help
--edit--
fixed!
biggest help i have EVER had in custom roms/rooting etc..
http://forum.xda-developers.com/showthread.php?t=1351224
TRusselo said:
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
Click to expand...
Click to collapse
ok cmw is not mounting cache or anything else any other ideas
So I rooted my phone with SuperOneClick, then tried installing CyanogenMod, but it kept failing. I read somewhere that reflashing the original kernel via Odin could help, so I tried that, but it failed. So I restarted Odin, tried again and it got stuck at "SetupConnection". Eventually I just restarted the phone, but that was a terrible idea, as now I can only see a screen saying a ROM installation went wrong, and to use Kies to fix it. BUT I can still get into download mode, but Odin is still doing the same thing.
Anyone know what's going on?
Probably might have to return to stock with Odin. Maybe just try flashing the stock recovery with Odin first and see what that does.
Sent from my SAMSUNG-SGH-I727 using xda premium
I've been trying to flash to stock with Odin. And recovery. Nothing will flash. Some problem every time.
Hold both volume buttons on the left side of the phone, and then plug in your usb cable. You should be in download mode.
...I know what Download mode is. I've been there the entire time. That's not the problem I'm having.
Whenever I try to flash anything using Odin, it fails at the NAND write, then if I restart Odin and try again it hangs up at SetupConnection. This happens with ANYTHING I try to flash. And now, if I try to boot the phone normally, it goes to a screen saying there was a firmware error and to enter recovery mode in Kies, which I can't do because Kies won't connect to the phone.
Try using a different cable. I got the same error using my longer USB cable, but switching to the original cable from the box helped.
Alright, here's the story. I've been here a while, flashed a lot and never had an issue. My S3 locked up and shut down after loading a ROM so I decided to flash back to stock and start over. I have unlocked the bootloader and flashed many ROM's, modems, rpm, etc. before.
My phone was in download mode in ODIN and had begun flashing when the cord was pulled out of the phone (don't ask). Since then I can still get into download mode. Odin recognizes the phone but won't move beyond NAND WRITE Start!!!. Occasionally, it will boot telling me to repair update with KIES. I have tried KIES but it won't recognize the phone. I have downloaded the stock PIT and attempted flashing that while having root66 in in the PDA column. While ODIN continues to recognize the device I cannot get a flash past NAND WRITE start.
I have tried flashing the bootchain, CWM, and bootloaders in ODIN all with the same result. I have tried several cables and different USB ports. Did I manage to hard brick my phone even though I can get to Download mode?
Thanks.
Any ideas?
Try a different computer and make sure you are plugging into a usb 2.0 plug. Check the MD5 sums of your downloads too.
Tried that. I think I need a way to fix the NAND partition. Flashing the correct PIT doesn't work either.
Did you pull battery and press appropriate buttons, then put battery back in while holding button combo?
Also, nothing will flash unless you can actually get into download mode.
I'm in download mode but nothing will get past the nand flash write... I can get into download mode and ODIN recognizes the device. Flashing anything seems to start fine but I cannot get past Nand flash write... it just stays there forever. I need some advanced help as I think pulling the cord while flashing in ODIN jacked up my partitions.
It's still doa. Any ideas?
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
I was stuck rooting on the boot logo too. Had to use odin 3.10 and did "run as administrator". Also if this helps to reboot the stuck phone press vol down+power together until the screen blanks out. If you need to get into download mode, as soon as the screen blanks out, press and hold the Home button ( Don't let go of the vol down and power though ).
Good grief.... the non-removable battery has made these recovery tricks so difficult
thanks twisted_mind. at this point, i only get the blue screen asking me to do smartswitch recovery, and the one thing i CAN seem to do is volDown-power-home and it easily goes to download mode. i have not been able to get to recovery mode no matter what i do (including volUp-power-home, even before this smartswitch message came up after i tried to odin a stock recovery).
so i can still go to dload mode, and stick in a stock rom. the ones i've tried are from sammobile, and a potential issue is that i don't know the exact one to pick (this phone is a demo here in europe and i didn't note the details under settings when it was working). so the ones i try end in an odin FAIL. again, i've also tried odin unchecking auto-reboot, but then the phone is stuck at the very end of dload ("don't turn off target", etc), and i have no way to battery pull, etc.
Instead of holding power to shut off you have to hold power and vol down
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks
ktetreault14 said:
Instead of holding power to shut off you have to hold power and vol down
Click to expand...
Click to collapse
I have the turquoise screen that says "an error has occurred... use the emergency recovery function in smart switch...". if i do power + volDown there OR when the phone is stuck in download mode after the odin fail, the phone turns off but then comes right back on with the turquoise error screen. i've tried quickly going to the recovery key combo right when or right after the screen goes dark, but to no avail.
I can easily do power +volDown + home and go to dload mode. i just can't get into recovery mode no matter what i've tried so far.
if i could just find a stock rom that wouldn't fail in odin, or something else to use as AP/PDA in odin, i'd be set i think. wish i knew how to do this. hitting nand erase all in odin doesn't do the trick by the way.
ammsamm said:
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks
Click to expand...
Click to collapse
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters: http://www.sammobile.com/firmwares/database/SM-G925F/
jasonastley said:
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters
Click to expand...
Click to collapse
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted
ammsamm said:
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted
Click to expand...
Click to collapse
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.
jasonastley said:
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.
Click to expand...
Click to collapse
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com
ammsamm said:
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com
Click to expand...
Click to collapse
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?
jasonastley said:
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?
Click to expand...
Click to collapse
Actually this is not the link i downloaded the odin from i tried to
Atthach the one i have but faced with the upload limit, even
After ziping and spilting the the odin, upload failed,
So, you better find another odin 3.10.6 a version with all the buttons
are enabled.