Gents,
This didn't take much effort, but I wanted to provide it since I think others can benefit from it.
The updated mods are available at http://android.linuxkidd.com/edify/ due to the size restrictions of attachments here at XDA. These are compatible with both the older Clockwork Mod versions as well as with the new 3.0.0.x which only supports Edify scripting.
I have flashed and verified the aosplock.zip to be 100% functional.
The remaining files have been modified in the same way, but were not tested. Any reports regarding errors received during the flashing process are desired.
NOTE: Original credit for these mods go to Dameon87 and were downloaded from his google code site, then modified with the new scripting.
All available mods:
Code:
297411 Jan 13 20:44 aosplock.zip
4644739 Jan 13 20:44 huluflash.zip
10191121 Jan 13 20:44 samapps.zip
11931285 Jan 13 20:44 samwidgets.zip
7692093 Jan 13 20:44 sprintapps.zip
1453370 Jan 13 20:44 stockemail.zip
Installation Instructions
----------------------------------
* adb reboot recovery
* Flash the Zip file(s)
* Reboot
If you don't get any errors during the flashing of the Zip files, then all should be fine. If for some reason, the desired outcome is not obtained, please post to this thread. However, keep in mind... I simply updated the installation script for the add-ons. I did not create the add-ons. Hopefully, someone from the community can help figure out where things went wrong.
Enjoy!
LK
--- NOTE: These have been updated as of Jan 13 to correct the installation script. Please report on the new format.
Nice! I'm stoked on this.
Umm this is weird...are there prerequisites for this?
I'm still running di18, still on rfs, rooted with baked snack and app2sd (the whole paritioned sd card thing). I wanted to try out the hulu. Flashed with cwm, nothing failed...but I can't find it anywhere. Is the app2sd messing it up? Its not in system/app, system/sd/app, or system/data
Sent from my baked and emotionless SPH-D700
These mods are specifically targeted at DK28 ROMs, so your milage may vary.
Aside from that, there won't be anything noticable on the device. But, if you browse to Hulu ( make sure you have Plugins turned completely ON, and not 'On-Demand' in the browser ), you should be able to watch Hulu content.
LK
linuxkidd said:
These mods are specifically targeted at DK28 ROMs, so your milage may vary.
Aside from that, there won't be anything noticable on the device. But, if you browse to Hulu ( make sure you have Plugins turned completely ON, and not 'On-Demand' in the browser ), you should be able to watch Hulu content.
LK
Click to expand...
Click to collapse
tried the hulu flash but when i opened it, there was a message that said that hulu is working on providing streaming to mobile phones and that its not supported on my phone as of now? it was after installing the huluflash
I am on Quantum Rom v2.7.0.DK28 via CWM 3.0.0.5. I just attempted the hulu flash mod and it doesn't seem to work. I did make sure that flash updates were uninstalled, auto updates turned off, plugins set to always on, and Dolphin browser HD User Agent was set to Desktop.
There was no error during the flash. I got:
ClockworkMod Recovery v3.0.0.5
Checking for ext4 partitions...
Checking /system...
Checking /data...
Checking /cache...
Done!
--Installing: /sdcard/huluflash.zip
Finding update package...
Opening update package...
Installing update...
Install from sdcard complete.
Hulu gives the usual error of "unfortunately, Hulu is not supported by your platform..."
I just tried aosp lockscreen and samapps and both did not work. It said install complete but cw 3005 did not automatically reboot. It just said installation complete. I had to reboot manually and when phone started no change to lockscreen and samapps were not installed.
Dont think it was the right link...upload dates are from last year...
Sent from my SPH-D700 using XDA App
I could be wrong but are you guys making sure to reboot recovery into the EXT4 version before you flash?
USMC_LOPEZ said:
Dont think it was the right link...upload dates are from last year...
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Jan 6 2011 was last year?
Sent from my SPH-D700 using XDA App
I stand corrected it works... once flash go to your sd and look for the hulu app in data and then install.hope this helps and thanks kidd.
Sent from my SPH-D700 using XDA App
Lol I clicked on the wrong link...sorry guys
Sent from my SPH-D700 using XDA App
USMC_LOPEZ said:
I stand corrected it works... once flash go to your sd and look for the hulu app in data and then install.hope this helps and thanks kidd.
Click to expand...
Click to collapse
Sadly, it still shows:
"Unfortunately Hulu is not supported on your platform..."
On another note, I also flashed the AOSPLock, but my lock screen did not change upon reboot. Anything else that needs to be done (like the Hulu install)?
nubsors said:
I could be wrong but are you guys making sure to reboot recovery into the EXT4 version before you flash?
Click to expand...
Click to collapse
CWM 3.0.0.5
Checking for EXT 4
All pass
I do believe so
They install correctly but neither the AOSP lockscreen appears or the Samsung widgets.
Hold on I got a working link for the aosp...i have it on my cell
Sent from my SPH-D700 using XDA App
http://www.multiupload.com/QFZIDHARQ9
Sent from my SPH-D700 using XDA App
Thats should work
Sent from my SPH-D700 using XDA App
Dude... If you installed the flashes the hulu zip... Reboot and go into your sd card and look for the zip you flashed... then select it and open it... you then see data folder... click on that and select the hulu apk file... install... I noticed that its an app not available on the market and it totally wotks.
Sent from my SPH-D700 using XDA App
*
Sent from my SPH-D700 using XDA App
USMC_LOPEZ said:
http://www.multiupload.com/QFZIDHARQ9
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Watch the quintuple post there my friend
But thank you sir, looking at this script told me why it isn't working.
TO ANYONE TRYING TO INSTALL AN EDIFY SCRIPT, AND UPON REBOOT THE INSTALLED .ZIP IS NOT SHOWING:
Make sure you wipe Cache and Dalvik Cache before installing .zips.
Wipe both
Install .zip
Reboot
Profit
Related
First I'd like to thank the Bonsai team (Mammon88 and Randy_T) for their work.
This little set of files is totally based on their work, I just modified it a bit.
I asked permission before releasing this, and I've left the GPL notices intact.
All changes can be seen by inspecting the files in the zip.
Thank you Team Bonsai!
:[Disclaimer]:
You assume all risks in using these files. Not me, you!
I will attempt to help if anything goes wrong.
But don't try blaming me for something you chose to do.
:[Description]:
There are two ClockworkMod zips, I'll break it down for each file.
ncDataBackup.zip:
This file simply backs up the /data folder to a gzip file on your SD card (exactly like the Bonsai Rom does).
The only difference is that it will store the file in a different folder and file name on your SD card.
The file is stored @ /sdcard/data-backup/backup-data.cpio.gz​
ncDataRestore.zip:
This file first deletes everything in the /data folder.
I figured this would be best so there are no conflicts with files that are already in the /data folder.
[NOTE]:: This also means that if the Rom your are using installs anything into the /data folder, it will be lost during the restore!
Then it simply restores the /data folder from the aforementioned backup file (exactly like the Bonsai Rom does).​
:[Purpose]:
I made this so I never have to setup a home screen again (or loose mms history, call logs, etc)!
For people who are using Roms that don't already preform a backup and restore of the files in /data.
And as an alternative to a bit for bit nandroid backup / restore of the /data partition.
:[Disadvantages]:
As stated, the restore will delete everything in the /data folder before performing the restore.
So anything put there by the Rom you are installing will be lost!
I wouldn't Expect this to work coming from or going to CyanogenMod, but feel free to test for me.
:[Benefits]:
Restores home screens, mms history, call logs, etc...
Can be used whenever for whatever reason (always good to have more options for backup / restore IMO).
:[Usage]:
Boot into ClockworkMod.
ALWAYS DO A NORMAL NANDROID BACKUP WITH CLOCKWORKMOD.
Install the ncDataBackup.zip, it will preform the data backup.
Install your favorite Rom.
Install the ncDataRestore.zip, it will preform the data restore.
Reboot the phone.​
:[Testing]:
This has been tested while running Bonsai v2.0.1.
This has also been tested coming from Bonsai v2.0.1 going to Quantum v2.7.
I only had one FC (gmail) when going to Quantum from Bonsai, and that's because Quantum's gmail wasn't updated.
I simply cleared gmail's data and cache and all was well (then I updated gmail through the market).
[NOTE]:: Both of these Roms are DK28 builds and support EXT4! Your mileage may vary!
:[Feedback]:
Please post your results, good or bad, I'd like to know how well this works for other Roms.
I'm thinking of making a backup/restore zip generator program so this method can be used for other phones.
So if you try this please post your results.
:[Changelog]:
[03-05-2011]
Upgraded files to Bonsai 3.x.
Now uses an included busybox, this should allow support for more Roms/devices(?).
Zip file names have changed.
Also changes have been made to the script output.
Tested on Bonsai 3.x
=]
simply perfect, thank you good Sir. Runin Bon201
Sent from my SPH-D700 using XDA App
Ty man, digging utilities.
Sent from my SPH-D700 using XDA App
Awesome thanks
Sent from my SPH-D700 using Tapatalk
Thanks for this! I had my phone freak out on boot up during the zipalign process, which pretty much killed my /data directory. I had just installed Bonsai 3 the other night and realized the backup it made was not the normal CWM img backup! With your zip I was able to restore the gzip that bonsai 3 created to my phone.
Perhaps there were other built in ways to do the restore but your zips took care of my problem!
Great work!
juise said:
Thanks for this! I had my phone freak out on boot up during the zipalign process, which pretty much killed my /data directory. I had just installed Bonsai 3 the other night and realized the backup it made was not the normal CWM img backup! With your zip I was able to restore the gzip that bonsai 3 created to my phone.
Perhaps there were other built in ways to do the restore but your zips took care of my problem!
Great work!
Click to expand...
Click to collapse
Glad it was of use to you.
Should be an update coming to these in a day or two, not much changed other than including a copy of busybox in hopes of supporting more Roms/devices.
=]
awesome work man. i love this. now its easier to switch roms
This is really awesome! Thanks man.
I did try this the other night switching from Bonsai to SFR, but it got stuck on the bootup screen. Any one else try this for SFR?
Sent from my SPH-D700 using XDA Premium App
I got stuck on the bootup screen as well
Sent from my SPH-D700 using Tapatalk
Thanks! I'm kinda surprised CWM doesn't do this out of the box.
musclehead84 said:
I got stuck on the bootup screen as well
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Thanks for the information. At least I know it's not just me. I tried the rom a couple times even restoring from Market with poor results but will probably try again sometime. May need a clean ODIN restore.
Sent from my SPH-D700 using XDA Premium App
Those having problems...
The backup / restore process was altered just a bit with the release of Bonsai 3.0.0.
I mentioned an update to these files yesterday, I'm going to work on that now and get it finished.
I'm not saying that the new changes will fix the problems, but there's a chance.
BBL with the update.
=]
Updated, check OP.
Those who are freezing at the bootscreen, please report back if you test this.
-ps these files clear out davlik-cache, so the 1st boot after a restore will take a while (but should not freeze @ the samsungmobile screen).
=]
nubecoder said:
Updated, check OP.
Those who are freezing at the bootscreen, please report back if you test this.
-ps these files clear out davlik-cache, so the 1st boot after a restore will take a while (but should not freeze @ the samsungmobile screen).
=]
Click to expand...
Click to collapse
Thanks for the update Nubecoder.
Are the files on the opposite updated or are you still working on them?
Sent from my SPH-D700 using XDA Premium App
This work fine for me today switching between ROMs. The only issue I had was that it didn't seem to restore the apps2sd apps.
Sent from my SPH-D700 using Tapatalk
mattallica76 said:
This work fine for me today switching between ROMs. The only issue I had was that it didn't seem to restore the apps2sd apps.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Maybe I will try it again.
Sent from my SPH-D700 using XDA Premium App
mattallica76 said:
This work fine for me today switching between ROMs. The only issue I had was that it didn't seem to restore the apps2sd apps.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Ya it doesn't handle apps on the SD.
Only the stuff in "/data".
[edit]
pjjohn73 said:
Are the files on the opposite updated or are you still working on them?
Click to expand...
Click to collapse
Had no idea what you meant there for a little while...
Yes the files in the OP have been updated.
=]
nubecoder said:
Ya it doesn't handle apps on the SD.
Only the stuff in "/data".
[edit]
Had no idea what you meant there for a little while...
Yes the files in the OP have been updated.
=]
Click to expand...
Click to collapse
LOL. Sorry about that. Auto correct did not like OP I guess, and I did not notice the typo. My bad. Thanks for the answer.
Sent from my SPH-D700 using XDA Premium App
nubecoder said:
Ya it doesn't handle apps on the SD.
Only the stuff in "/data".
[edit]
=]
Click to expand...
Click to collapse
Ok, makes sense. Curious, what does Bonsai do that keeps the apps on SD synced with the OS that this tool does not?
And thanks again for this. It has saved my bacon a number of times.
mattallica76 said:
Ok, makes sense. Curious, what does Bonsai do that keeps the apps on SD synced with the OS that this tool does not?
And thanks again for this. It has saved my bacon a number of times.
Click to expand...
Click to collapse
I would be curious as well, only thing i can think of is when Bonsai runs it does not wipe data, if you install a rom that wipes data before install it will wipeout .andriodsecure on the sd card.
Is it possible to flash via odin and cwm and some gremlins still lurk. I ask because i've flashed 3 roms today and each one seem to have the same issue with missing market app and such. I don't know if it's a app i'm using, but it seems wierd. I went from Gingerbread (where it started) back to froyo and flashed 2 froyo roms with the issue
Try RaverX3X's KC1. Unfortunately, I don't have the link, so look for it on this forum. That should clear up all gremlins you have.
Yeah i tried that the last time. Possibly I should do my flashing straight from that with the required stuff to get root?
Sent from my SGH-T959V using XDA Premium App
im getting the same issue, I've Odin stock kc1 without root then gained root, installed cwm. Then proceeded to install Audiophile Series: Redux. Still has the same issue. I've even odin gb Kg4, KG5, KH1, & KH2. All gave me the same problem. Everything works perfect up until I shutdown my phone and reboot it. Then I get the grey android icon with these apps:
com.amazon.venezla (Amazon Appstore)
com.monotype.android.font.felbridge (felbridge font)
com.quoord.tapatalkxdapre.activity (XDA premium)
com.touchtype.swiftkey (swiftkey)
net.everythingandroid.smspopup (Smspopup)
org.projectvoodoo.controlapp (Voodoo)
& of course my market app does not work either, even when i install the new market it force closes.
I have also not dont ext4 conversion, so that cant be this issue
Anybody know how to fix this problem?
Try flashing the KC1 Cleanup Rom first. That's at:
http://forum.xda-developers.com/show....php?t=1129933
Then flash KC1 etc.
i figured it out. Thanks!!
digitallure said:
i figured it out. Thanks!!
Click to expand...
Click to collapse
What worked for you? I have the same problem -- lost marketplace app and not sure what to do besides reflashing.
Curious that not everyone else is having this problem as I used the "Step by Step on how to flash any Gingerbread rom". Maybe it's occurring when EXT4 is done.
Lol I'm sitting here and reading all the posts and lolling XD.Just reboot onto recovery and go to mounts there normally should be MUUM but when apps are missing there is MMUM (i think i got that right, the unwanted mount should be data ) after you unmount data reboot and voila none of the apps are missing.
Source: personal experience ;-)
EDIT: don't forget about fixing permissions after rebooting
Sent from my SGH-T959V using XDA App
spy4ka said:
Lol I'm sitting here and reading all the posts and lolling XD.Just reboot onto recovery and go to mounts there normally should be MUUM but when apps are missing there is MMUM (i think i got that right, the unwanted mount should be data ) after you unmount data reboot and voila none of the apps are missing.
Source: personal experience ;-)
EDIT: don't forget about fixing permissions after rebooting
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Mounts should always be UMMU. You got it the other way around.
You guys should check out my thread.
http://forum.xda-developers.com/showthread.php?t=1223765
If you just want a Froyo cleanup only flash the KC1 ROM, if you want the GB cleanup, follow all the steps in the guide.
spy4ka said:
Lol I'm sitting here and reading all the posts and lolling XD.Just reboot onto recovery and go to mounts there normally should be MUUM but when apps are missing there is MMUM (i think i got that right, the unwanted mount should be data ) after you unmount data reboot and voila none of the apps are missing.
Source: personal experience ;-)
EDIT: don't forget about fixing permissions after rebooting
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yeah that didn't work for me. Basically what I did was back up my sd card, partition it, then followed the steps FB posted.
Sent from my SGH-T959V using XDA Premium App
Sent from my SGH-T959V using XDA Premium App
Dont understand why
A factory reset will solve missing app issue
tabii said:
A factory reset will solve missing app issue
Click to expand...
Click to collapse
From my experience over the past couple weeks and through dsextons posts, I believe the issue is that your phone was still partially ext-4 when you flashed.
After I installed cyanogen mod 7 I no longer have android market to acess, not sure if that should happen. Also I backed everything up with titanium backup but it is no longer on my phone cause i wiped it. Can someone help me through getting back android market and all my old apps?
Likely need to flash gapps ... Google apps, should be a download available where you got ROM
I just downloaded the newest nightly build, idk if i should have downloaded something before if you could help out
hkdflip2 said:
I just downloaded the newest nightly build, idk if i should have downloaded something before if you could help out
Click to expand...
Click to collapse
Please search before opening a new thread. It is a well known fact that CM roms do not include any Google apps at all. Find the proper zip file for your rom and flash it.
Wiping your data will also not wipe you back ups as they are saved to your sdcard..the only way they would have been deleted is if you manaully deleted them off your sdcard
Sent from my Inspire 4G using XDA App
Come on dude do some research and stop spamming, gapps is literally inn the thread you got the ROM from (assuming you didn't use ROM manager)
Sent from my SGH-I777 using XDA App
Download GApps, put on sdcard, boot into recovery and flash.
Sent from my Inspire 4G using XDA App
I posted this in the general section, but no one has answered it. Please release the platypus egg kernel as a .zip file or post a link to where I can download the kg2 odin file so that I can flash the bali port. I want voodoo and refuse to flash an entire rom just to get voodoo.
check the heimdall thread i have it posted there last 2 pages
heimdall isnt working on my computer unless you posted an odin file in that thread its not going to help me.
Unless you are in love with the Samsung launcher vs. GOv2's Launcher Pro (or my preferance: download ADW.Launcher), there is no reason not to upgrade to GOv2 and get all the other tweaks in addition to the Kernal.
I know you say you've had trouble in the past, but just try it like this:
1) Boot in to CWM with the GOv2 zip on the sdcard.
2) Check your mounts
3) Run a backup
4) Check your mounts
5) Wipe data, wipe cash, wipe dalvik-cache
6) Check your mounts
7) Flash GOv2
8) Check your mounts
9) Advanced-Restore data partition only
10) Check your mounts
11) Reboot
Best case, everything works great and you just upgraded the Kernal as well as many other good things / tweaks, while still keeping all your apps and all your config.
Worst case, just boot in to CWM and restore what you currently have. You only waste about 15min of your life in trying, and I don't see how GOv2 could have any drawbacks over stock+bali (other then the alternate Launcher and themed icons/widgets - I installed AWD, unthemed all my icons, and I love the transparent-black widgets).
You should NEVER need to Odin unless you can't get in to CWM (which should never happen).
NOTE: When I say check your mounts, each partition on that CWM page should read "unmount" (meaning they are currently mounted). Check your mounts before/after each step, including before the final reboot.
I know how to check mounts. I want to keep touchwiz because of the themes. I really like the stock themes, and none of the launchers from the market have the option to view the app drawer as a list. if they did, i would consider using one of them. the stock themes are not really what is important. viewing the app drawer as a list is. my process thus far has been as follows: odin to kd1, kies to kj2, root, backup, flash rom, then restore system only from the backup. it hasnt been stable enough so far, but right now i am considering trying it a little different. i am going to get back to stock kj2, then delete all bloatware and all google apps from the system, then backup, then flash, then restore system from the backup, then reinstall any apps i want from the market. I also have the .apk file for play store, so i am also going to delete market and market updater before backing up. then after restoring system, i am just going to install google play store from my sd card. if anyone has any thoughts, please respond soon. i already odined back to kd1, getting ready to do kies to kj2. that takes a few minutes as i have to unplug the phone from the pc and reinstall the drivers through kies.
But I would prefer to just flash the kernel. I dont see any reason why they wouldnt release it.
well, after a very lengthy and complicated process, i finally have the platypus kernel on kj2. here is what i did. i started kies mini but didnt plug my phone in yet. i just went to menu and install driver. then i odined. after reboot, unplug the phone, back to kies, install drivers again. plug phone in and update firmware through kies. after reboot, unplug and install driver again. turn on usb debugging and root through super one click. reboot. install drivers again. then go through the system and delete all google and tmobile apps. get cwm running and take a backup. connect mass storage and copy b2tb to sd card. flash according to instructions. reboot. let the phone sit while i walk my dog. come back, boot into recovery, select advanced restore, system only. fix permissions, wipe dalvik, reboot. reinstall desired apps through market website. that was all last night. today i supercharged. so far so good.
well, its been almost 24 hours since i finished everything up. stable so far. no random reboots, no force closes, no screen lag or freeze, no crashes. i kept my backup from before the flash, just in case. gonna give it another day or two to make sure everything really is stable, then take a backup of the current setup. once i do that, im leaving this phone the hell alone lol.
To clear the record, I never had trouble flashing roms except for once and it was because i flashed cwm through rom manager before i knew not to do that. my most recent trouble started when i attempted to move dalvik to my ext2 partition. something went wrong when i attempted to move dalvik, and it got deleted. i had a backup and tried to restore, but got an md5sum mismatch. i did a factory reset through voodoo and it screwed up my apn settings. i restored default settings, but it didnt work. so basically after much trial and error, i have a stable advice again.
Do you still want this as a flashable zip???
Sent from my SPH-D710 using xda premium
ReActiveDisorder said:
Do you still want this as a flashable zip???
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I would like this as a flashable .zip, cant find it anywhere.
so if i flash GoV2 , ill get kj2 and all the other goodies? cause i am having a hard time finding stuff on here. and honestly once i get gov2 on my soon to be sidekick. thats all im doing to it since its dead here. i hear its the best
I'm on Generic Ginger 3.8 with the platypus egg V1 kernel, blaze 4g radio. Kicks ass! Battery life is amazing... I just wanted to flash the kernel on some other roms..
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
I'm on Generic Ginger 3.8 with the platypus egg V1 kernel, blaze 4g radio. Kicks ass! Battery life is amazing... I just wanted to flash the kernel on some other roms..
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
i don't have a flashable zip unfortunately, but what i've been doing is flashing the zimage thru Odin. if that helps you at all, if you're comfortable with Odin, i've been meaning to upload the tar file for the kernel that i made to this thread:
http://forum.xda-developers.com/showthread.php?t=1538576
WolfV2 said he would add it to the OP once i uploaded it. other than that, ReActiveDisorder had made a flashable zip, but i see that all his links have been removed.
edit: there's also nxd's tutorial on flashing a kernel with Hemidall here:
http://forum.xda-developers.com/showthread.php?t=1665150
yogi2010 said:
i don't have a flashable zip unfortunately, but what i've been doing is flashing the zimage thru Odin. if that helps you at all, if you're comfortable with Odin, i've been meaning to upload the tar file for the kernel that i made to this thread:
http://forum.xda-developers.com/showthread.php?t=1538576
WolfV2 said he would add it to the OP once i uploaded it. other than that, ReActiveDisorder had made a flashable zip, but i see that all his links have been removed.
edit: there's also nxd's tutorial on flashing a kernel with Hemidall here:
http://forum.xda-developers.com/showthread.php?t=1665150
Click to expand...
Click to collapse
Thanks a alot, man. Appreciate it.
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
Thanks a alot, man. Appreciate it.
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
Wait hold up, what am I thinking... had a little brain freeze there!. You could just use nxd's build of the Bali Kernel for KJ2:
http://forum.xda-developers.com/showthread.php?t=1663622
That also has the keystroke logger removed, AND a patch to improve keyboard responsiveness and efficiency!
yogi2010 said:
Wait hold up, what am I thinking... had a little brain freeze there!. You could just use nxd's build of the Bali Kernel for KJ2:
http://forum.xda-developers.com/showthread.php?t=1663622
That also has the keystroke logger removed, AND a patch to improve keyboard responsiveness and efficiency!
Click to expand...
Click to collapse
Sweetness! Thanks again.
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
Sweetness! Thanks again.
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
no problem, enjoy. if you haven't already, read the thread to see how to play with the timer and column delay settings for the keyboard!
Moved thread to general where it should be
First and foremost. We are not responsible for ANY data loss in using this app.
TWRP Manager
This app will let you install, restore, backup, and wipe your device. It uses OpenRecoveryScript commands to do the operations.
Requirements:
TWRP Recovery installed
Root access on device
Download:
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Issue Reporting:
You MUST provide what device you are using and the steps to reproduce the issue. If it is not repeatable then please just say what you were doing and your device.
Screenshots are attached.
Thanks:
DeesTroy - obviously without TWRP, this app wouldn't exist. Also, for letting me use the TWRP images for this app. He also provided consultation for this app.
Mazwoz - He is my partner in crime in this project and has done tons of work on this app.
Lithid - He helped with a few bugs including layout issues.​
Reserved
Changelog:
Code:
v6.0: Completely new UI
Fixed KitKat SD Card issue causing Live Backup to crash.
Fixed several smaller bugs
v5.5.7: Fixed Restore FC
Fixed Restore having to click back three times to cancel
Fixed having to click back until root dir to exit file browsers
v5.5.6: Fixed reboot issue on i9300
v5.5.5: Added a live backup system (in a purchase)
Install recovery
Ad removal (in app purchase)
v5.3.5: Added a file manager for deleting/renaming backups
Restore auto detects backup folders
v5.3: Fixed restore FC issues
Minor layout tweak
Added widgets
v5.2: Added multiple zip support
Fixed backup names not allowing spaces
Adjusted the file names and icons size
v5.1: Changed layout of install and restore activities
Auto-detection of restore folder
Auto-detection of existence of data, boot, and system images in restore folder (more to come in future releases)
v5: Fixed bug of automatically finding SD Card.
v4: Added automatic support of external SD. Some misc bug fixes
v3: Another layout testing release. Also integrated swipe to complete actions.
v2: Release is only for layout issues.
v1: Alpha release
Features:
Code:
A new feature has made it's way into the TWRP Manager app: Live Backup.
This is a nandroid backup without having to reboot into recovery. To our knowledge this is the first java implementation of this feature.
Flashing TWRP from within the app:
As long as your device is supported by Team WIN, you can now flash TWRP from this app.
FAQS
Q. Does this app support multiple zip queues?
A. As of version 5.2 it does
Q. Should I wipe/backup before installing?
A. The app is intuitive and allows for backup and wiping from the install option.
Q. Some of the features do not work, what should I do?
A. If you get a message that says it is not implemented, it is not a bug. That is for future releases. If you get a force close or other issue, please let us know.
Q. Will this work with other recoveries?
A. No. TWRP Manager is programmed to run on TWRP only
Q. My device is not supported by TWRP, is there anything I can do?
A. If you do not have TWRP running on your phone, this app will not work for you.
Q. Will this app install TWRP for me?
A. There are no current plans to have this feature. Goo.im already does this and we do not want to step on any toes.
Awesome job, the UI looks great also!
Good job JMZ!!!
Great job it looks better and is more functional than goomanager.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
interesting nice work
Will it support TWRP themes??
Also is an ad-less version planned?
polobunny said:
Will it support TWRP themes??
Also is an ad-less version planned?
Click to expand...
Click to collapse
Themes will be a future endeavor after app is stable. Ad-less version will be available sometime in the near future.
installed fine !
but can't do a backup
Htc One
Trickdroid 7.5.0
steps
Pressed backup
set backup name
used the slider
nothing happens just sits there
CheesyNutz said:
installed fine !
but can't do a backup
Htc One
Trickdroid 7.5.0
steps
Pressed backup
set backup name
used the slider
nothing happens just sits there
Click to expand...
Click to collapse
But when installing it rebooted to recovery like it was suppose to?
Do we need to have installed a custom recovery in order to be functional?
jmz said:
But when installing it rebooted to recovery like it was suppose to?
Click to expand...
Click to collapse
nope it did not
installed app
opened it looked around tried to make a backup its asked for permissions i granted it and then nothing
CheesyNutz said:
nope it did not
installed app
opened it looked around tried to make a backup its asked for permissions i granted it and then nothing
Click to expand...
Click to collapse
Im going to fire all my private testers. Thanks for pointing it out. I will fix it up later. Something happened to the reboot commands....
jmz said:
Im going to fire all my private testers. Thanks for pointing it out. I will fix it up later. Something happened to the reboot commands....
Click to expand...
Click to collapse
no worries glad to help
Installed fine
But do nothing
When i want to install apps
The folder is empty
Mount not implemented
Everything seems not respon when i choose one of it
And why it doesnt grant permission for access root?!
Do i am wrong
My device is xperia neo
Ics 4.0.4
I installed cwm as recovery
Sent from my MT15i using xda premium
Installed on N7. Hit the restore button and program force closed.
Sent from my Nexus 7 using xda premium
mvoid533 said:
Installed fine
But do nothing
When i want to install apps
The folder is empty
Mount not implemented
Everything seems not respon when i choose one of it
And why it doesnt grant permission for access root?!
Do i am wrong
My device is xperia neo
Ics 4.0.4
I installed cwm as recovery
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
could be your using CWM but not sure
Maybe
But it should be grand permission for access root but it didnt do that
Its nice
But too bad not work on mine
Sent from my MT15i using xda premium
Sorry about the massively stupid mistake on the reboot issue. I have pushed an update to the market that fixes it. Please give it a few hours to populate in the market.
This has only been tested on twrp. Dunno much about other recoveries
Sent from my HTC first using xda premium
melp57 said:
Installed on N7. Hit the restore button and program force closed.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Please try the new update when it is finally available on the market
Sent from my HTC first using xda premium