Related
I recently upgraded my captivate with the official att/samsung froyo release. So far it seems to have made my phone worse. It's slower, and freezes periodically. I was wondering if it's possible to root after the official upgrade or is this blocked. Hoping I can root and flash new kernel and get better performance. This droid world is new to me, so any assistance would be appreciated, especially if it's written for a novice.
Btw, I've done 2 master resets hoping it would help, and it didn't.
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
Dont you think you should have told the op that those are directions for flashing Cognition 4.3.1?? What if he doesn't want to flash a rom, just a kernel?
OP: Download Superclick v1.7. It will root your phone. From there, search Development threads for a kernel.
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Pirateghost said:
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Click to expand...
Click to collapse
Thanks for the Rage part. Keep forgetting that, even when I use it on my phone.
So I tried superclick 1.7 and had no luck. It would say waiting for device, I'd plug in. my phone and then would say it was running, but nothing happened. Tried with debugging on and off. Any advice? Also can you direct me where to get superclick. I'm worried that the site I got it from may be malicious. Also I'm running windows 7, just in case that makes a difference.
http://forum.xda-developers.com/showthread.php?t=803682
make sure you have the drivers installed for you phone, and you have USB debugging ON....it has to be on in order for it to work
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Cdub3 said:
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Click to expand...
Click to collapse
Flashing a rom is quite simple. Obviously I'm going to be biased and suggest Andromeda3 as the recommended ROM, since I put so much time into that rom. Check out the guides and tutorials found in Q&A and development
Sent from my HTC Vision
Most all of the roms here have flashing instructions on page 1 of that thread.
And back up before you start. You can never back up too much.
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Cdub3 said:
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Click to expand...
Click to collapse
yes odin will fix this in about 5 seconds or less!
before you start disable lagfix! this is important! but speed mod may just work be cause it has similar lagfix options available in the kernel. still wouldn't try it though.
recovery is part of the kernel. grab a kernel in .tar format. speedmod is great for this
open odin (not one click but full version) put .tar of kernel in pda slot
put phone in download mode (if 3 button is broke you may want to flash back to 2.1 with 3 button fix or another rom with 3-button fix via odin) you can access download mode via use of adb in the mean time.
plug in phone, make sure auto reboot is selected and reformat is not selected.
the left most box in odin should turn yellow. hit start. it takes about 3 seconds. phone will reboot with new kernel all data will be intact.
at that point you can enter recovery mode which will be cwm. you can root from cwm or install a rooted rom that will include another kernel.
kernel flashing doesn't effect data or settings or version number but kernel need to be same android version, eclair rom needs eclair kernel, froyo needs froyo ect. but a 2.2 rom can run 2.2.1 kernel and vice versa. same goes with 2.3 and 2.3.3 ect. also samsung tw roms need tw kernels, sense roms need sense kernels and aosp roms need aosp kernels. and of cource the kernel should be for you phone.
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Use the 3e recovery push. Had to use on Vibrant.
Sent from my SAMSUNG-SGH-I897 using XDA App
studacris said:
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Click to expand...
Click to collapse
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Dani897 said:
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Click to expand...
Click to collapse
I agree, just informing in case he stuck with a captivate modem with that kernel and couldn't understand the issues he was having.
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Cdub3 said:
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Click to expand...
Click to collapse
speedmod might not change the kernel version in about phone, some devs do not change that.
use the 3 button combo to get into recovery mode, does it boot into cwm with green text? if it did you are running speedmod.
also when phone boots it will say sgh-i897 on a black splash screen after the att param.ifs splash screen
if you still have blue samsung 3e recovery and no black galaxy s splash screen there was a problem.
So I do get a different screen when phone fires up. It does say sgh-1897 which is different than before, I can't seen to get the 3 button recovery thing to happen though. Hope it's right, just thought my phone would be faster. Seemed faster with oneclick lag fix. Guess I'm crazy. The phone does seem louder when it fires up, which I read this kernel helps make happen. Is there another way to get to recovery to see if the 3e issue is fixed. If so is there another kernel that would be faster for me or do I need to do the ROM thing next. Also, since I didn't think this worked I tried to install oneclick lag fix again, but couldn't because there wasn't enough space.does this mean speed mod went through. I also did the speed mod flash like 3 times thinking that it wasn't working. is that as problem? Sorry for all the questions. I'm just new to all this and I don't have much computer savy either. Thanks for putting up with me.
ok so you do have speedmod.
for recovery, with phone off, press volume+volume for 2 seconds
continue to hold volume and press power, holding all three till the first splash screen pops up then release.
first decide if you want to keep speedmod, you can root in recovery and flash to a different kernel after, can also flash a new rom now.
speedmod is an i9000 port. it may not work perfect with the kb1 modem. if you flash kc1 modem it will not work with bluetooth calling. i use it as a tool to flash other roms, to root, and to flash other kernels and not deal with 3e, that is the point of me suggesting it. but giving up bluetooth calling isn't a big sacrifice to some people and many do use it like you are.
now if you want speedmod and lagfix you can do that in recovery, speedmod has a universal lagfix. disable this before flashing a voodoo kernel (or stock) if you change it later.
the lagfix has the options to set data, dbdata, or cache to ext2,ext3,ext4,ext4 non journalling, or jfs
it can also set /system to ext4
voodoo settings are /system=ext4
/cache=ext4nj
/data=ext4
/dbdata=ext4
these are the most common settings and are very successfull.
feel free to pm me with questions, rom recomendation, ect...
edit, just noticed you already have root via rageagaintthecage method via superoneclick, i always forget about that on the sgs though i have done it on an evo the hard way a while back, now we have superoneclick so it's not hard anymore. you can install a market app called sgs kernel flash and experiment with kernels that way. prolly what i'd have told you if i read the whole thread.
Hey huys, Im coming from the vibrant to att captivate, tmobile vibrant was very simple to flash with rom manager can I do that with the captivate as well?
The only thing rom manager is good for is making the first update.zip with cwm for flashing a rom from stock, otherwise if you are on a custom rom it really isn't needed at all as all of the roms have an extended power many to boot into cwm recovery and from there it is the exact same process...
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Rom manager won't do you any good either. You need to look up 3e recovery and fix the signature problem
Sent from my HTC Vision
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Oh!! You are on stock 2.2 it won't work. Do a search for 3e recovery signing, all update.zip files have to be digitally signed to work, there is a fix where that is no longer required. Or since I'm guessing you have the update.zip already you could use odin to get back to 2.1 which had 2e recovery and not have to fix the 3e or need to root for rom manager to work either.
Edit: pirate you are a ghost slipping in invisibly while I'm replying
Is a virgin phone stock 2.2 just rooted by super one click. Where can I get the file to fix the signature
umm you could have used the search function and had it by now...
in any case its in this thread... http://forum.xda-developers.com/showthread.php?t=909213
how many times is this rom manager/3e question going to be asked TODAY? im counting 3 sofar.
i answered the other 2.
and im up to 6 this week. all new threads..
At least he's not hellbent on flashing cm7.
I haven't posted much on here but I have been reading since June/July. I had this problem but found the answer thanks to the search feature. That is why I didn't even flash a rom until a week ago. I wanted to be informed, understand how everything works, etc. Thanks to all of you devs. for your hard work!
I can't post in the development forum yet but I want to thank Krylon for Hooking up Black Ice and I want to thank Raver who's guide to Black Ice install allowed me to end my 2 day epic quest in success instead of failure.
here is Ravers Guide for anyone who needs it
FYI Oden 1.7 works fine and I used the KC1 & KD1 from the SGS4G Bible
OK im going to help u out sorry bout my previous statement i was just n a really bad mood and then trying to find some posts on xda and just going though the bs stuff had me more adijated...
OK step one prep
Make sure on the sd card Root folder no where else you have
update.zip
can be gotten out of krylons cwm final thread
also get the recovery file out of that thread just in case you have a kd1 without a fixed recovery file.
blackice stable on your sd card
U will also need odin i found actually odin 1.85 to be the best out of them for flashing but older ones work as well to just my personal prefrence for flashing on windows when i have ot use it.
You will also need a kd 1 rom to flash to thats flashable by odin i recommend whitehawks kd1
now that you have all that time to get black ice installed you ready
load up odin make sure you have your kd1 zip file in the pda section on odin
put your phone in download mode vol up vol down (pressed and held) insert usb...
IF THAT DOES NOT WORK
Vol Down pressed and hold and hit power button
IF ^^^^^^^^^ IS HOW YOU get to download mode stop there means your on gingerbread bootloader.
GO back and use the bible in this thread use my gb recooked rom thread first post there i linked a kc1 that has the Sbl and boot file thats not a i9000 and is not a gb bootloader .
These steps are only for if you have the gingerbread bootloader
download and extract my kc1 rom
in ODIN
Pitt = Hawk_Sidekick_VibrantPlus_831.pitt
pda = T959VUVKC1-REV00-ALL-low-CL933594.tar.md5
phone = T959VUVKC1-Phone-CL932707.tar.md5
CSC= SGH-T959V-CSC-TMB.tar.md5
Make sure RE PARTITION IS CHECKED
FLASH
wait for odin to do its business let the phone reboot and boot up once
This rom isnt rooted its just used to get gb bootloaders off the damm phone
Once done power off phone
After that go back and see first step put phone back in download mode and Flash with a KD1 that has root or just super one click root it after your choice.
Flash KD1
let phone reboot then power down make sure your sd card is in the phone reboot into recovery with
vol up vol down Pressed and held and power button that will boot bdn
install from update
if you get signature verificaton failed you have a kd 1 without the modified recovery bin
download file expert and or root explorer off the market at this point and do this
root explorer or adb push the Recovery file to /system/bin
DO NOT delete the current one there, or rename any files.
Just overwrite it.
Once done reboot phone and then go back to recovery mode and install from update
this will boot you into cwm orange
vv CHECK YOUR MOUNTS vv
cache /UNMOUNT
sdcard /MOUNT
data /MOUNT
system /UNMOUNT
^^CHECK YOUR MOUNTS^^
ONCE you verify that
back out install from sd card
scroll down to black ice and install rom
once the rom is installed back out of cwm orange and IN CWM HIT REBOOT PHONE
this will reboot the phone derp
derp derp
boots into cwm red!!!!
at this point theres 2 option u can do the voodoo lag fix from there or not Honestly on the first time i let linda say voodoo lag fix is disabled and just go back and convert it after
reboot phone your personal choice there to do the lag fix first and or after
Your phone should now speak to you and say converting data partition converting system bla bla bla
once booted enjoy go back and apply voodoo lag fix if u wish
if you get system not found
or just sits there like a bump on log
reflash back to kd 1 with odin
repeat steps but while ur doing that stick the bali 2.1 kernel on the sd card on your phone
after you install black ice
install the bali 2.1 kernel and then reboot
that will not convert once u get the system up and running go back and reflash 3.1 or 3.2
Hope this helps u all
Wait till you install a gingerbread rom! I couldn't belive my phone would ever be this smooth.
Sent from my SGH-T959V using XDA App
well your welcome damm that was a old guide and wow u found it
I never tought flashing froyo roms were so difficult...
Just make sure you have update.zip in sd card and rom, then have your prefered froyo cwm flashable rom in sd card too and also ext converter. Then put phone to dl mode, odin whitehawk kd1, boot into cwm, check mounts, flash ext converter, check mounts and flash rom. Reboot... Thats it!
Thats what i used to do until i flashed audiophile ftw while drunk so i dont know how to deal with gb. Lol
Sent from my SGH-T959V using XDA App
I also wanted to give thanks in the developer's forum but I couldn't yet. So I will do it here. I am a complete noob to all this stuff so I read and re-read these forums before I got up the nerve to try anything. I first tried rooting using the guide in the bible. Then I flashed Drsexton's ICBINB and loved it. Now I'm on Raver's Audiophile Redux and no offence to Drsexton but I love this one even more . I have learned so much from the people on these forums but I have learned the most from RaverX3X and Drsexton. So I would like to say a special thanks to all the Dev's for all of their great work but also to the xda community because I know this is a group effort.
Totally agree - can't post there (argh), but LOVING my phone with Audiophile on it! It took a fair amount of reading many of the great dev's threads, but in the end I'm very happy with the outcome!
Thanks Raver for Audiophile. I went through a few roms, but the value of this one is greater than my need to tweak - so I'm set.
if you really wanna show your appreciation for raver's work you should read this thread. you'll also see all the others who greatly appreciate his work.
easier perhaps? I read about a rom manager you download from the market...
Thanks to what efforts everyone contributes here, I've found after getting out of soft brick, I managed to get root. And I'm almost happy with the handset, now that I got root explorer to work. It works best as a browser for the 20 gigs of junk on my sd card, I've found.
What I have is the SGH-i727 att branded, returned to stock, 2.3.5, my kernel is 2.6.35.11 also I flashed something in the i777 forum, is the reason for "returned to stock". My handle could be adjusted to "stupidbiker". And I've been properly scolded.
So what's a good way to get clockwork mod in my situation?
And I don't care about a warranty or a counter, or does the counter do other bad things?
And a link for operating clockwork mod? Everyone here can push three buttons except me! LOL I've pulled it off a few times on accident, but I bet in here somewhere there is a correct procedure outlined for operating clockworkmod. A link to that would be way cool.
Wow I'm stupid. K. Thanks.
This is question and answer right? I got lots of questions!
Once I get clockworkmod in the device with all the colors, I'm gonna flash a rom, the ice cream rocket I saw, also I want to test CM7, I'm in L.A. and in the LTE area and looks like I could provide input.
I'm using search, but if someone plants a good link it would be much appreciated.
Thanks.
fukenbiker said:
easier perhaps? I read about a rom manager you download from the market...
Thanks to what efforts everyone contributes here, I've found after getting out of soft brick, I managed to get root. And I'm almost happy with the handset, now that I got root explorer to work. It works best as a browser for the 20 gigs of junk on my sd card, I've found.
What I have is the SGH-i727 att branded, returned to stock, 2.3.5, my kernel is 2.6.35.11 also I flashed something in the i777 forum, is the reason for "returned to stock". My handle could be adjusted to "stupidbiker". And I've been properly scolded.
So what's a good way to get clockwork mod in my situation?
And I don't care about a warranty or a counter, or does the counter do other bad things?
And a link for operating clockwork mod? Everyone here can push three buttons except me! LOL I've pulled it off a few times on accident, but I bet in here somewhere there is a correct procedure outlined for operating clockworkmod. A link to that would be way cool.
Wow I'm stupid. K. Thanks.
This is question and answer right? I got lots of questions!
Once I get clockworkmod in the device with all the colors, I'm gonna flash a rom, the ice cream rocket I saw, also I want to test CM7, I'm in L.A. and in the LTE area and looks like I could provide input.
I'm using search, but if someone plants a good link it would be much appreciated.
Thanks.
Click to expand...
Click to collapse
download rom manager, install cwm from that, select tmobile galaxy s2 when asked.
see what I found
First you need to flash Clockworkmod Recovery. Then you place the zip on your SDcard, do a Nandroid backup through clockworkmod Recovery (not necessary but highly, highly recommended... especially if you have never done this before.) Then select install zip from SD card, find the .Zip file and run it and you should be golden.
What is nandroid? I use Mybackup Pro. Same sort of stuff right? I'm getting close to getting my arms around everything....
waiters said:
download rom manager, install cwm from that, select tmobile galaxy s2 when asked.
Click to expand...
Click to collapse
Thank you for such a quick reply. I am on AT&T. Why would I select Tmobile?
"because that's the one that works"
is an answer I can accept. I'm not fussy just stupid.
Thank you!
I have successfully flashed ClockworkMod Recovery using ROM Manager. I'm so pleased I'm gonna get premium. I see directions! It shows a button for flashing a custom rom that I store on my SD card? Do I dare?
I picked the tmobile thing and so far so good. I got data and just tried a phone call. Happy.
I will follow the other threads now. If a moderator thinks people will get more stupid reading my new thread they may delete it.
I soft bricked
figured out Odin enough to flash back to stock
got root
went to market and installed ROM Manager
turned on wifi as ROM Manager recommended
after a good hookup, I flashed ClockworkMod recovery
Surfed the web, made a phone call, took a picture, uploaded to facebook
Looks like I'm all good.
I'm feeling ready...
fukenbiker said:
Thank you for such a quick reply. I am on AT&T. Why would I select Tmobile?
"because that's the one that works"
is an answer I can accept. I'm not fussy just stupid.
Click to expand...
Click to collapse
apparently they are very similar (but dont get crazy and start installing the tmobile gs2 kernel/roms) - also there is no skyrocket version yet...
but yes cwm does work perfectly from rom manager when you select tmobile gs2
i did this myself the other day... works fine..
just download rom manager, have fun.. good luck
hey ****enbiker would you say your kinda ''noobish'' when it comes to this ? lol I'm just super scared to do this. To avoid voiding my warranty I was even thinking of just saving a check and getting a nexus s to fool around with, but if your new to this and would say ''ALMOST anyone can do it'' I'd say I might be game. I just would like to learn somethings from newer rooters rather than annoy/piss off the Vets!
I have screwed up every phone I got my hands on so not a noob exactly. I am at present using cm7 and considering the new kernel released this morning. What's holding me back is how well it works and how easily I screw up and screen rotation work around is good enough so why flash and set up again... oh I will flash again but just got it all restored back and gotta take it to work tomorrow ...
Yeah pretty much if I can do it anyone can. I really am ignorant compared to a programmer or developer. But not many noobs have broken as much stuff as I have!
Sent from my SGH-I727 using xda premium
Boot into CWM?
waiters said:
apparently they are very similar (but dont get crazy and start installing the tmobile gs2 kernel/roms) - also there is no skyrocket version yet...
but yes cwm does work perfectly from rom manager when you select tmobile gs2
i did this myself the other day... works fine..
just download rom manager, have fun.. good luck
Click to expand...
Click to collapse
I am having trouble getting CWM to boot on device start-up with the Vol Up Key, is this how you do it or am I doing it wrong?
I can easily get to it from choosing "Reboot into Recovery" from ROM manager but I want to make sure I can get in without Android in case I need to do a full NAND recovery.
Thanks
promiseofcake said:
I am having trouble getting CWM to boot on device start-up with the Vol Up Key, is this how you do it or am I doing it wrong?
I can easily get to it from choosing "Reboot into Recovery" from ROM manager but I want to make sure I can get in without Android in case I need to do a full NAND recovery.
Thanks
Click to expand...
Click to collapse
its volume UP and DOWN......
the2rrell said:
its volume UP and DOWN......
Click to expand...
Click to collapse
Wow OK I thought I tried that, anyway it worked! Thanks a lot.
Sent from my SAMSUNG-SGH-I727 using XDA App
YouTube stutters on CM
Okay after I finally settled in with version 4 I have figured out that version 3 it was okay YouTube did not stutter or jerk, it is this new Da_G's kernel when the video went to hell. I remember the problem appeared in version 3 after flashing Da_G's kernel.
I have not tried any other kernel beside Da_G's with version 4. And YouTube is skippy jerking all to our dismay here. Or there, where ever I was to report this, beg pardon.
Sent from my SGH-I727 using xda premium
edit:
I see you don't have to press the power button?
I always begin that way, I press all three at once.
Volume up, volume down, and power.
After it buzzes three times I keep the volume up and down held, but let go of the power button.
I keep the volume up and down held until I see a logo on the screen. Then I let go of the phone and it boots into the scarey black screen with dos writing and you have to navigate with the hardware buttons.
That's how I've been doing it and it puts me into cwm recovery straight from putting the battery back in, every time.
If a true noob is reading this, you're dropping in after I've rooted and then obtained clockworkmod from the market, granted it superuser permissions, and then, after getting past the advertisements, you select to flash clockworkmod.
Also you'll see discussion of not getting a signal and getting an APN. Before you try CyanogenMod or CM7, which is what I use, you take your handset that has a working signal, and download an app from the market called "APN backup and restore" and do a backup of your APN. (not for those who refuse to populate the phone with a chip) (also not for those who don't have a working wifi readily available) Now make sure you have a copy of that on the other chip. The Skyrocket has an internal SD and also an external SD which ATT turns out is too cheap to put one in there when they sell it...
Make sure you have ApnBackupRestore folder with it's xml content on both chips.
Then go to CM7, in the op, get version 4, then go to the kernel thread and get Da_G's kernel, and put them on BOTH sd cards (so you won't have trouble finding it LOL)
And there you have it. Yet another blue collar attempt at helping folks that are smarter than I am that aren't as brave as I am!
Pull the battery, and apparently only hold the two volume buttons after putting the battery back in, never tried it that way! Wipe Data/Factory reset, find the rom and install it, find the kernel and flash that zip as well (install it, trying to help with lingo) reboot, then hook up to wifi, download APN backup/restore from the market (your phone will sync and load it for you when you log in with your google gmail to set up the handset. Run the APN backup and restore app and enjoy CyanogenMod!
My favorite, can you tell, LOL
fukenbiker said:
Okay after I finally settled in with version 4 I have figured out that version 3 it was okay YouTube did not stutter or jerk, it is this new Da_G's kernel when the video went to hell. I remember the problem appeared in version 3 after flashing Da_G's kernel.
I have not tried any other kernel beside Da_G's with version 4. And YouTube is skippy jerking all to our dismay here. Or there, where ever I was to report this, beg pardon.
Sent from my SGH-I727 using xda premium
edit:
I see you don't have to press the power button?
I always begin that way, I press all three at once.
Volume up, volume down, and power.
After it buzzes three times I keep the volume up and down held, but let go of the power button.
I keep the volume up and down held until I see a logo on the screen. Then I let go of the phone and it boots into the scarey black screen with dos writing and you have to navigate with the hardware buttons.
That's how I've been doing it and it puts me into cwm recovery straight from putting the battery back in, every time.
If a true noob is reading this, you're dropping in after I've rooted and then obtained clockworkmod from the market, granted it superuser permissions, and then, after getting past the advertisements, you select to flash clockworkmod.
Also you'll see discussion of not getting a signal and getting an APN. Before you try CyanogenMod or CM7, which is what I use, you take your handset that has a working signal, and download an app from the market called "APN backup and restore" and do a backup of your APN. (not for those who refuse to populate the phone with a chip) (also not for those who don't have a working wifi readily available) Now make sure you have a copy of that on the other chip. The Skyrocket has an internal SD and also an external SD which ATT turns out is too cheap to put one in there when they sell it...
Make sure you have ApnBackupRestore folder with it's xml content on both chips.
Then go to CM7, in the op, get version 4, then go to the kernel thread and get Da_G's kernel, and put them on BOTH sd cards (so you won't have trouble finding it LOL)
And there you have it. Yet another blue collar attempt at helping folks that are smarter than I am that aren't as brave as I am!
Pull the battery, and apparently only hold the two volume buttons after putting the battery back in, never tried it that way! Wipe Data/Factory reset, find the rom and install it, find the kernel and flash that zip as well (install it, trying to help with lingo) reboot, then hook up to wifi, download APN backup/restore from the market (your phone will sync and load it for you when you log in with your google gmail to set up the handset. Run the APN backup and restore app and enjoy CyanogenMod!
My favorite, can you tell, LOL
Click to expand...
Click to collapse
Whoa!!!!! COOL STORY BRO.............LOL
I'm sure this will help someone.
Sent from my SAMSUNG-SGH-I727 using xda premium
I don't know for sure, about the vol. up/dn.. but when I rooted my phone, the only way that I could get it to work was power & volume DOWN only. The three button just got me no where.
Sent from my SGH-I727R using xda premium
Okay so, I love my Infuse but getting really tired of not being able to download anything off the play store. Just tired of it's rather less than great performance right now as well. It's is running 2.3.6 GB and want to get this thing up to ICS if possible. Just something running 4.0 so I can use my phone for what I need too. It is not rooted, no cyanogenMod, NOTHING. As the title says, I'm a full on noob here and I apologize if all this is covered in other threads, however I have just gotten to the point where I have found myself even more lost than where I started on what I needed to do/get. If someone can, I will literally need this spelled out to me (no pun intended), in order of the steps I need to take with everything. I'm getting tired of confusing myself even more from all the different stuff I have seen all over the place and I know without some serious guidance, I will just brick my phone. Thanks for any help! :laugh:
I understand this community can be a bit unorganized and confusing so I'll give you my process for rooting and installing custom firmware (there are other ways, but this works for my AT&T Infuse 4G SGH-i997).
First of all, no one uses ICS on the Infuse. There is a ROM, but it's underdeveloped because JB came out so quick. You will need to flash it to get to higher operating systems, but it is by no means a daily driver. Even JB is a little buggy compared to KitKat on the Infuse these days.
The first thing you want to do is root your phone and get a custom recovery.
There are more than a few options for rooting, but I prefer using ODIN (as I understand it, this is the tool Samsung uses to restore soft bricked phones). So this is a good thing to know how to do, in case you ever do soft brick your phone, you'll know exactly what to do.
Read the ODIN instructions in full as I will only briefly explain.
You're going to have to install Samsung drivers.
You'll be using UCLB3_Unbrick_root_1.1.zip. If you used UCLB3_Unbrick_1.1.zip it would just get you back to stock GB with no root added.
To put your phone into download mode, first turn off your phone. Plug a usb cable into your computer. Then with the phone off, hold down both volume buttons and plug the usb cable into your phone. A warning will come up and you push volume up to accept, realizing that you can easily soft brick your phone if you loose power or unplug during a download.
Once downloading is done, the phone will reboot and you'll be disappointed to see that nothing has changed. Except one small thing, you are now rooted and you should have an application called SuperUser that will allow you to do nifty and also dangerous things.
Now follow this step in the ODIN instructions to add the custom recovery (CWM = Clock Work Mod):
The version with root works exactly like the above version, but adds root. To add CWM recovery to the rooted version, download a custom Gingerbread kernel from HERE or HERE and flash the zImage using SGS Kernel Flasher (found in the Play Store) on the phone. If you go this route for root and CWM, your Custom Binary Download counter will not show any custom binary activity.
Click to expand...
Click to collapse
If you follow the link in the second "HERE," you'll get the kernel I prefer since it was most recently updated. Scroll down the downloads section and grab "2013.04.30-CWM-Synthesis-1.2Ghz.zip." (1.2Ghz is stock for our processor, anything higher will be overclocked which I don't recommend).
Extract that and grab the zImage file in the update folder. You're going to copy this to your phone in a second.
But first you need SGS Kernal Flasher, you can get it off the playstore, but I despise having to log in to an OS I'm going to write over in less than a minute so I download the APK from here. Hopefully you know how to install APKs from your SD card and that you'll have to check install from unknown sources.
Now flash the zImage using SGS Kernel Flasher. Your phone will reboot and hang on the Samsung logo and a creepy voice is going to tell you about how she's partitioning your phone and installing Voodoo lag fix. This is normal. Eventually your phone will reboot back into GB and you'll be ready to flash any ROM of your choice by rebooting into recovery.
You reboot into recovery by holding the volume up and volume down button while powering on the phone. This is different than download mode and will take you do a new screen that you control with the volume keys.
You'll be using this to put new software on your phone.
Now you can bassically follow the instructions for getting to CyanogenMod 11 (Kit Kat) from GB.
The first bullet is what I just explained in detail.
Note that I didn't include the links in these instructions, just follow the link above to get to the original post.
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads sectoion
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps: Here - Working swipe!
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
To be clear, when you flash a ROM, it won't be like flashing the zImage (that was just to get custom recovery). To flash the CM9 ROM or Qksters IMEI backup script for example, you leave the rom in the .zip file and simply put it on your SD card. Once in the recovery screen, you select "Install Update from ZIP" and navigate to the particular ROM you wish to install.
Also after updating to a higher version of Android, your phone will sometimes hang on the install screen for a long time. If it does for more than five minutes, it's safe to pull the battery and try flashing again (and sometimes necessary).
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Lately I've been using CyanFox and I have to say, it's the most stable ROM I've used in a while.
If you have any questions about this, feel free to ask.
Best of luck and happy flashing,
~bokonon9
Thank you muchness!
Thank you very much for helping me in this mess! I greatly appreciate it. I love my Infuse and do not want to get rid of it quite yet so hopefully this will help! Once I get a new usb cord I will get on this. My toddler decided to get a hold of it and it has to set a certain way now and can't be moved. This, is no bueno! Anyways, THANKS AGAIN!!! :laugh:
Goodluck! :laugh: :good:
I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Click to expand...
Click to collapse
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!
wwr said:
I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!
Click to expand...
Click to collapse
i would say go back to stock gb with odin and basically start over but with ics i always let it reboot to get a "feel" for it then i reboot to recovery and wipe basically everything then flash the next level of android which should be cm 10 then i let that boot then repeat that to get to kitkat 4.4.3 CarbonRom....sometimes you have to flash the same rom twice to get it to flash tho
I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall
wwr said:
I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2091900&page=370
read the last post on that page by scmfxt