Database Info

X7510 will not read information off SIM card

Telecom New Zealand has recently launced its "new" mobile network - WCDMA on 850MHz (it was a the rather antiquanted CDMA system prior!). Their range of "new" phones was nothing spectacular really and nothing much else worldwide appealed to me more than the X7510, so I duely purchased one from the UK.
When the SIM card was installed the unit come up with the following message:-
The Operator does not exist in the database. Please contact your Operator for the connections settings.
[Intrestingly enough, Vodafone NZ is in the database, even although the X7510 is not sold in NZ - but I digress!]
However the phone function and SMS appear to be working well, apart from the fact that it refuses to acknowledge the NZ Telecom Voicemail number. I get a good solid H in the Quick Menu Bar.
The data connection refuses to work at all though.
I have contacted "the Operator", but they are not all that interested in helping me as the X7510 is not a phone we support and while they've helped a little bit, the several HelpDesk Operators I've tried, all seem to end up with the same conclusion that everything the phone needs to know about the network and connection is on the SIM card.
When I open the SIM Manager, I can "see" some of the data there. (e.g. such as the Voicemail Number, but Voicemail on the phone Speed Dial is blank - no number stored). And when I try and connect to the Internet (using the number that Telecom provided verbally) it keeps asking for more Connections Settings, which I am told, there aren't any more to enter - it's all on the SIM!
It appears to me that the phone is trying to "capture" the Operator's Settings via radio rather than obtain it from the SIM!
Is there a way I can override the radio search function and get the PDA to "look" at the SIM card? Or maybe try any other method to obtain a data connection.
Any advice appreciated.
Cheers, Greg
Model No. ATHE400
ROM Version: 3.27.405.3
Protocol Version: 32.91.7020.20H
ExtROM Version: 3.27.405.104

I'm not too up on this, but I think your X7510 is NOT compatible with the TNZ system. Telstra use a very unusual hybrid of 850/2100 connections where most operators use 850/1900 or 2100 only. One is for upstream and the other for downstream where there are 2 figures.
Although it does support both 850 and 2100Mhz, they are on different frequency bands, so you could have the 850/1900 working OK, but not 850/2100.
What it means in practice is that whichever band you select, you will only get upstream or downstream UMTS connections, not both together. This may be why you see the 'H' but can't connect. In practice, you may only be able to use this phone on the slow GSM network.
Some of the other stuff is setup based, and some info you have been given is simply wrong!
To get the SMS and Voicemail number set, start the phone dialler, and go to Menu/Options/Services then scroll to the bottom setting in the window (VM and SMS) and tap it to highlight, then Get Settings. You may need to manually enter the VM access number you normally dial. Do 'Save to Network' and they should be OK.
For data access, you do not enter any phone numbers- you need to configure the setting as 'Cellular Modem GSM/3G' then enter the Access Point (APN) and any password and username.
It seems Telstra are cagey about publishing the connection parameters but I found this one:
GPRS APN: - telstra.internet
Username: - {blank}
Password: - {blank}
DNS: - 139.130.4.4, 203.50.170.2
As I suspect though, you may only be able to get GSM, not 3G/UMTS

NeilM said:
To get the SMS and Voicemail number set, start the phone dialler, and go to Menu/Options/Services then scroll to the bottom setting in the window (VM and SMS) and tap it to highlight, then Get Settings. You may need to manually enter the VM access number you normally dial. Do 'Save to Network' and they should be OK.
For data access, you do not enter any phone numbers- you need to configure the setting as 'Cellular Modem GSM/3G' then enter the Access Point (APN) and any password and username.
Click to expand...
Click to collapse
Neil,
You are a Gem! Okay, the first part didn't work, but I can enter the Voicemail as Speed Dial #2 or use the Voice Dial on the Parrot BT; so no real biggy that the X7510 simply will not accept the Telecom Voicemail number.
But I did hit paydirt with your data access suggestion and that was the one that was really important for e-mails and Internet access (as there aren't too many Wi-Fi Hot Spots in sparsely populated New Zealand!!)
Thanks so much for your prompt and excellent response.
Regards,
Greg

You're welcome!
Presumably you are only getting GSM speeds for your email and web access? Or do Tesltra do something different with their band splits to allow full 3G access?
It may be interesting to go to DSL Reports when you have a good signal and see what speed you are getting. You might have to repeat the test with a larger file than the default, but you'll get the correct prompts.
GSM will give you from 25 to about 100kbps (GPRS or Edge), 3G will give up to 300kbps and HSDPA can give up to 2Mbps
I don't know if you can do anything about the incorrect speed dial 1, but at least you have a workaround. Are you sure you manually entered the Voicemail number in the VM box in Options/Services/SMS and Voicemail> Get Settings ? I've just tried this with my X7510 and after editing the VM number, then hitting 'OK' it commits the change to Speed Dial 1 correctly.
[Edit. I can alter my Speed Dial 1 number by opening the Dialler then tapping 'Speed Dial', highlighting SD1 then Menu/Edit which opens the settings screen. Scroll to the bottom of the list to select Voicemail and Text Messages then Get Settings. Manually enter your voicemail access number then tap 'OK' which send the settings to the network and commits the change to SpeedDial 1. If that doesn't work, it may suggest Telstra are blocking the ability to change. ]

Once again, thanks for the prompt reply.
On that speedtest link you gave me I got: - 483, 489 & 319 kbps. This is off the local tower which is a good 20 kms from the city. I'll try in the CBD tomorrow and see what I get.
I had aready tried your suggested methods for locking in the Voicemail number, but to no avail. On my X7510 it's called Voicemail and Text Messages and when you highlight and then Get Settings, it always shows a number for the Text Message Service, but a BIG blank for the Voice Mail!!
Intersting comment you made about the Service Provider possibly blocking the ability to change?? If they are, lil' old me ain't going to get them to change that!
b.t.w. it's Telecom, not Telstra (who although here in NZ, are not a big mobile player like they are in Ausssie). I would guess that in NZ, Telecom has about 45% market share and Vodafone likewise.
I'll be in touch on best speed as at this stage, I appear to be somewhere between 3G and HSDPA?
Cheers,
Greg

ok- your figures are showing a pretty good connection speed so you are definitely in the HSDPA zone!
With regard to the blank box for the VM number: have you actually tried typing your VM number into the box then hitting ok?

Neil,
Yes I have tried typing in the Voicemail number directly under Phone Settings. When I hit OK, it says "Sending new settings to Network" and then comes back with "Cannot Save your changes"
On the speed - I have just picked up the "new" USB data card (for use on the same HSPDA Network) for my laptop and given that a try - wow! Download 6,485 kbs - Upload 1,445 - that's 1.5 x times the speed of my Office copper-wire broadband system. Telecom did promise some pretty impressive speeds and they are delivering (by NZ standards anyway).
I actually think your first summation of the this NZ Network being on 850/2100 (and not compatible with setup on X7510) might be correct Neil as about 545 kbs is the best I can achieve on the X7510. Hey, I can live with that, the other features of the X7510 make up for that and the laptop is never far away if I want to get some real speed!!!
Cheers,
Greg

[GUIDE] HTC EVO on MetroPCS!!

Alrights guys, don't know if anyone has posted a tut for this yet but I finally got this EVO up and going with web. I don't know who the original poster of this was but it sure rocks!!
So Lets Begin First you will need the following Items
1. Cdma-Workshop (Any Build) i will not post.....hint....Search
2. Qpst v2.7 build 323 (I have attached this)
3. Htc Hero DIAG Drivers (I Have Attached This)
4. Htc Sync (Its On The Link At The Bottom)
5. BetterCut or Anycut ( I have made a link for...Anycut)
Ok Now that we have the Files Lets Start Flashing
1. Press ##DIAG# (##3424) on your phone You will see a screen Pop Up Thats Normal
2. Now plug The phone up to the computer and it will try and find the drivers but it will fail or ask you to locate the drivers manually so make sure you remember where you unzipped the files
3. Once you have that setup Go to Cdma-Workshop Go To the port the phone is on and Read From the Phone and go to the Security Tab.....and On the Spc Section Read The lock Code and write it to back to the phone so it says unlocked Then make the code 000000 and rewrite the code so it says sucess.
4. Now Close Cdma-Workshop and Open QPST Configuration Click On The Ports Tab and Add New Port ( Make Sure Show Serial and Usb/QC Diag Ports Only is Unchecked) and Add The Port Of Your Hero.
5.Highlight Your Port and Click Start Client and Start Service programming and Press Read From Phone The SPC should be all 0's so click on the M.I.P. Tab and Change The Mobile IP Behavior To Simple Ip. Edit The M.I.P. Profiles at the Top. Your NAI and Tethered NAI should be ([email protected] or [email protected])
6. Next Click On The PPP Config Tab and Click the UM Button your user id should be ([email protected] or [email protected]) and the password and tethered NAI should be metropcs or cricket Do the Same For the AN Button and press Write to Phone It should Give You a Error But Dont Worry About It
7. Press ##DATA# (##3282#) And Setup your Data for your phone and press menu and Commit So your phone Will Reboot
8. Install BetterCut or AnyCut on your phone and open it Press New ShortCut And Go To Activity It make take a couple of minutes for it to appear but when it Does Go down to Proxy Setting and Click It. It Will Ask for a Name make it whatever you want to. It should say shortcut created sucessfully. Go to your Home Screen and it should be somewhere on there press it and Edit it For Cricket It should be HostNAME: wap.mycricket.com And Port Should be 8080 and for Metropcs HostName: wap.metropcs.net and Port Should Be 3128.
**Forgot who originally posted this, but its not my solution, enjoy**
Drivers:
http://rapidshare.com/files/34424222...AG_Drivers.zip
htc sync:
http://rapidshare.com/files/345204153/HTCSync.exe
anycut:
http://rapidshare.com/files/345202329/any.RAR
QPST:
http://rapidshare.com/files/343520454/qpst_2.7_348.rar
QPST pass is: cdma-king.com

hmm..interesting read..although I don't want to be on MetroPCS but another coolness to add for Evo

What about verizon?
How about flashing the evo to verizon? To us that have I/O evo our screw it should I just move to sprint

chumba8 said:
How about flashing the evo to verizon? To us that have I/O evo our screw it should I just move to sprint
Click to expand...
Click to collapse
+1
I would like to know that too

If you really want it on verizon you could ask an authorized verizon retailer to basically do this same thing for you. they love signing people up this way as they get to pocket the normal phone subsidy ($250 on the evo).

does 3g work?

metro 3g...

doesnt metro pcs use sprint towers?

bobdude5 said:
doesnt metro pcs use sprint towers?
Click to expand...
Click to collapse
Believe that is boost mobile

Well you can pretty much get Verizon coverage from that other thread using Altell's towers. Too bad ping gets raised, but hell... way better signal and speedtests

killac93 said:
Alrights guys, don't know if anyone has posted a tut for this yet but I finally got this EVO up and going with web. I don't know who the original poster of this was but it sure rocks!!
So Lets Begin First you will need the following Items
1. Cdma-Workshop (Any Build) i will not post.....hint....Search
2. Qpst v2.7 build 323 (I have attached this)
3. Htc Hero DIAG Drivers (I Have Attached This)
4. Htc Sync (Its On The Link At The Bottom)
5. BetterCut or Anycut ( I have made a link for...Anycut)
Ok Now that we have the Files Lets Start Flashing
1. Press ##DIAG# (##3424) on your phone You will see a screen Pop Up Thats Normal
2. Now plug The phone up to the computer and it will try and find the drivers but it will fail or ask you to locate the drivers manually so make sure you remember where you unzipped the files
3. Once you have that setup Go to Cdma-Workshop Go To the port the phone is on and Read From the Phone and go to the Security Tab.....and On the Spc Section Read The lock Code and write it to back to the phone so it says unlocked Then make the code 000000 and rewrite the code so it says sucess.
4. Now Close Cdma-Workshop and Open QPST Configuration Click On The Ports Tab and Add New Port ( Make Sure Show Serial and Usb/QC Diag Ports Only is Unchecked) and Add The Port Of Your Hero.
5.Highlight Your Port and Click Start Client and Start Service programming and Press Read From Phone The SPC should be all 0's so click on the M.I.P. Tab and Change The Mobile IP Behavior To Simple Ip. Edit The M.I.P. Profiles at the Top. Your NAI and Tethered NAI should be ([email protected] or [email protected])
6. Next Click On The PPP Config Tab and Click the UM Button your user id should be ([email protected] or [email protected]) and the password and tethered NAI should be metropcs or cricket Do the Same For the AN Button and press Write to Phone It should Give You a Error But Dont Worry About It
7. Press ##DATA# (##3282#) And Setup your Data for your phone and press menu and Commit So your phone Will Reboot
8. Install BetterCut or AnyCut on your phone and open it Press New ShortCut And Go To Activity It make take a couple of minutes for it to appear but when it Does Go down to Proxy Setting and Click It. It Will Ask for a Name make it whatever you want to. It should say shortcut created sucessfully. Go to your Home Screen and it should be somewhere on there press it and Edit it For Cricket It should be HostNAME: wap.mycricket.com And Port Should be 8080 and for Metropcs HostName: wap.metropcs.net and Port Should Be 3128.
**Forgot who originally posted this, but its not my solution, enjoy**
Drivers:
http://rapidshare.com/files/34424222...AG_Drivers.zip
htc sync:
http://rapidshare.com/files/345204153/HTCSync.exe
anycut:
http://rapidshare.com/files/345202329/any.RAR
QPST:
http://rapidshare.com/files/343520454/qpst_2.7_348.rar
QPST pass is: cdma-king.com
Click to expand...
Click to collapse
Congratulations buddy!
Thanks a hell of a lot for giving us this how to guide. I really appreciate it
Just had 3 questions:
1) Are you getting 3g data in Atlanta or is it just Edge?
2) What plan did you sign up for at MetroPCS?
3) If you decide you don't like MetroPCS, how do you reverse this process back to Sprint service?
Thanks again for figuring this out

jigglywiggly said:
Too bad ping gets raised, but hell... way better signal and speedtests
Click to expand...
Click to collapse
that probably depends on the tower coverage for the specific geographical location ...
i see the directions mention HTC Hero a few times. has anybody confirmed this works on the EVO?

Lol, I just spent all night trying to figure this out and you have made it very easy. Thanks. The Diag Drivers link doesn't work but I am sure we could find it somewhere else.
I do have one question. Do you still need to have a Metro PCS dealer add the ESN to their network?

hack-a-lak said:
Lol, I just spent all night trying to figure this out and you have made it very easy. Thanks. The Diag Drivers link doesn't work but I am sure we could find it somewhere else.
I do have one question. Do you still need to have a Metro PCS dealer add the ESN to their network?
Click to expand...
Click to collapse
Yes the ESN needs to be added to Metro's inventory. I had them add it and wallaahhh!

What works and what doesn't?
Can you list what works and what does not? I'm particularly curious about a stable 3G.

SYNTHAXXX said:
Can you list what works and what does not? I'm particularly curious about a stable 3G.
Click to expand...
Click to collapse
Right now talk, text and web are working. Still working on MMS. However I had great 3G reception here in Hotlanta.

killac93 said:
Right now talk, text and web are working. Still working on MMS. However I had great 3G reception here in Hotlanta.
Click to expand...
Click to collapse
I see... so for $50/mo (contract free) I can get the the same things that Sprint is offering me for $80/mo. When you minus the extra cost to buy the phone full retail $449 vs $199 on contract you actually saving about $570 over a two year period...
Hard choice

3G unstable
I have tried many configurations and no matter what I do, it seems that the "mobile network" connection is not stable. It will go out periodically and say "connection failed" or "turning on". Can you verify that you are not having this issue?
Also, this obviously does not bypass the WAP proxy which is used by Cricket. This means that other protocols, such as those used in navigation software and YouTube, are going to be blocked by the proxy server. Does anyone know a way around this?

SYNTHAXXX said:
I have tried many configurations and no matter what I do, it seems that the "mobile network" connection is not stable. It will go out periodically and say "connection failed" or "turning on". Can you verify that you are not having this issue?
Also, this obviously does not bypass the WAP proxy which is used by Cricket. This means that other protocols, such as those used in navigation software and YouTube, are going to be blocked by the proxy server. Does anyone know a way around this?
Click to expand...
Click to collapse
google around for the droid eris cricket tutorial. that has the proper method to set it up, and it works on all other cdma htc android phones.
i believe it is posted on howardfourms under the cricket section.

I myself was wondering if it was the same because I flashed my evo to cricket the same way just off of flashing know how....going to try and see if the Eris method matches what needs to be done to the evo and will report back

[Q] Questions about hidden settings in Android 2.3

I have quite a few questions some hidden settings I found while using ANYcut app.
My phone is the Epic 4G and on Gingerbread leak EH17 if that matters.
1) MSL code. I did some google searches and found that is an algorithm to determine the ESP and other things. What is the algorithm? If a phone had a bad ESP could you change the MSL to make Sprint think there is a clean ESP?
2) Cell broadcast SMS. What is this? And what is it for? some of the settings are Emergency broadcast, administrative, maintenance, local weather, area traffic reports
general news:
local
regional
national
international
And those same options for other types of news also
3) Data Create. I think this one is self explanatory. But is this for the maximum number of each I can store on the phone before it deletes them. So if i set the maximum number of texts in my inbox to 500, that is the maximum I can store?
4) Dial up networking. I thought this was going to be the 3G but I was wrong. What is it? I turn it on and click on the connection settings but nothing happens why?
5) Dock settings. Its obvious. But I herd that you can connect your phone to the a computer via USB and have it act as a dock and play songs or videos through the speakers on your computer. Is this true?
6) DUN. It has a picture of a computer with 2 green arrows. And 2 progress like bars, labeled, RX and TX. Any ideas? I was thinking it might have to do with USB activity.
7) EVDO settings??? I am on the Sprint network. Why would they not opt this options out of there SDKs? Isnt EVDO T-Mobile network? But I am on a leaked build so maybe they haven't removed it yet?
8) Preconfig? I really not sure what this is. It says sales code and then an input field. And at the bottom a button that says install and one for cancel. What would this be for?
9) License settings. most of the options are obvious but there is one for expiry reminder. whats that? reminds you when your DRM content is going to expire?
10) MMS Provision Settings. some settings are transaction logs, optional field attendance, UA string, UAP url, and test modes. Anyone know what this is for?
11) Now one that is just called advanced. Some options are home orig. vocoder. homepage vocoder, roam orig. vocoder. whats this for?
12) USB Logging(DM) One section is Function, with the options of, enable and disable. And other section called Type. the options are CP only, AP only, CP+AP. No idea about this one
13) WiMAX CT. there is a button at the top that says open device. then options of max num of used FA, FA Index, BW, FA index. Are these settings for WiMAX networking?
14) WiMAX Mode Change. The options are, SDIO, WTM, DM, USB, Auth modes. What are these different modes and what do they do?
15) WiMAX LineTest. Optioins are, write eeprom, power on, power off, write mac with and input field, and read mac. any ideas??
16) Work mode. it says Work Mode :2 and then a button that says set work mode. and i can set it to 1, 2 or 3. what are these different modes for?

Bump - Anybody want to jump in and help the op?
Wow, with all the brilliant minds on here no takers? Or is the question too big for anyone to take a stab at?
First off, as someone who somehow burnt out my 4G chip, I would suggest that anyone reading this be very careful, search here and google before fiddling with settings. lol
Since I am doing research to see if I can get my Wimax to work better I will answer a couple of questions a day, however anyone feel free to jump in.
1) MSL code. I did some google searches and found that is an algorithm to determine the ESP and other things. What is the algorithm? If a phone had a bad ESP could you change the MSL to make Sprint think there is a clean ESP?
The MSL code or (Master Subsidy Lock) is how a phone carrier keeps the phone from going to another network, however some phones including the E4GT can be found through using Android Debug Bridge (adb) a command line tool that lets you communicate with an emulator instance or connected Android-powered device - or even easier just go to the market and download, for free, Get My MSL which will display your Master Subsidy Lock code.
2) Cell broadcast SMS. What is this? And what is it for? some of the settings are Emergency broadcast, administrative, maintenance, local weather, area traffic reports general news:localregionalnationalinternationalAnd those same options for other types of news also
According to Wikipedia:
Quote:
Cell Broadcast is not as affected by traffic load; therefore, it may be usable during a disaster when load spikes tend to crash networks, as the 7 July 2005 London bombings showed. Another example was during the Tsunami catastrophe in Asia. Dialog GSM, an operator in Sri Lanka was able to provide ongoing emergency information to its subscribers, to warn of incoming waves, to give news updates, to direct people to supply and distribution centres, and even to arrange donation collections using Celltick's Cell Broadcast Center, based on Cell Broadcast Technology.
All for today. Peace

[Q] Boost Evo 3D 3g slow speeds! Heeeeeelp!!!!!

Ok I have a Evo 3D flashed to boost. I did it myself. Heres exactly how I flashed it:
1. Activated Incognito Donor and let the prl update.
2. Heres where Im kind of confused. I'm using CDMA Workshop 3.8.3 and qpst and qxdm. I read the nv items. I was told it should take a little while to read them. Mine dont. Takes like 10 seconds to read 465, and 466 and 1 second for 1192,1194. For my range I put 465-1194. Is that what I'm doing wrong? When I read 465-465 it reads very fast. Lastly if I read 465- the numbers already there which is 65535 it gets t0 %76 and says phones does not answer. Does it everytime even when I restart the incognito a million times.
3. I read Nams 1 and 2.
4. Read meid and obtained the SPC Code.
5. I studied profiles 0 and 1 tot he T.
6. Obtained the aa and aaa keys. for profile 1 is the aaa keys 12 digits or 6. That also confused me in the guide.
Evo:
1. **Repaired MEID**
2. Wrote NV Items 465,466,1192,1194. I wrote the NV items that took 15 seconds.
3. Wrote SPC code
4. I didnt write the nam files i just did the ##786# reset then wrote the spc code again and restarted phone and let it activate then canceled the PRL update.
5. Wrote the aa and aaa keys to profiles 0 and 1.
6. fully activated and stuck on 1x data speeds. Im on a stock rom (but even on a 4g evo rooted even tried multiple roms im still on 1x.)
Ive tried some methods such as change the proxy ip to 0.0.0.0 then http proxy port to 0. Didnt help at all.
Also tried going into EVDO and changing it from Automatic to CDMA Only. Still on 1x.
PLEASE HELP IVE BEEN LOOKING FOR ANSWERS FOR MONTHS AND NOTHING!!!! THANKS SO MUCH!

Verizon S3 / S4 / S5 / Note 2 / Note 3 to Page Plus Flashing with 3G

I want this to be a thread dedicated to help others to flash the mentioned devices to Page Plus / Selectel / Next-G / Service in REAL 3G....
I have been flashing phones for a several years now as a hobby and want to pass on some of my knowledge and advice to others making this transition.
A few things I want to do when time allows as I work a full time job and have a family.. (Not to mention my Flashing Phone Hobby)
1. Keep a list of PRL's that work with Page Plus with no roaming symbol...
2. Maintain a summary of how to get into Diag Mode on all phones and methods to get your SPC/MSL on Sprint Phones......
3. Post useful Apks,, 16 Digit Passwords, and other instructions on flashing the phones.......
4. Maintain a Current List of Page plus Sids for Flashing..........
5. Make this a thread that people can come to and discuss issues etc....
Now I am not good at writing Guides and truthfully at this time have no desire to do so, but I will however try my best to help you along the way when my time is available. So please I ask do not flood my Inbox with request for a guide etc. (Post here so others can contribute and everyone can learn together)
One thing I have learned over the years of flashing devices is its better to think it through and work by trial and error so you can truly learn the skill of performing successful flashes.
(Please everyone keep it civil and make this a community effort to help each and everyone)
Current Status is that I can pull Keys/Passwords on Verizon S3 / S4 / Note 2, Sprint S2 / S3 /S4 / Note 2, US Cellular S2 / S3 / S4 and Note 2 phones, Plus several other Phones and get REAL 3G with no donor on Page Plus / Selectel / Next-G....
(Again let me stress, please do not flood me with request to show you how to do this, as currently I will not post this information, I have my reasons and I hope you can respect that and use this thread for the other benefits you can get from it)
** Note: I did not include Verizon Prepaid or Straight Talk in this due to my beliefs that the cloning of esns/meids to obtain service is not LEGAL **
Viper

Page Plus Sid List
https://www.dropbox.com/s/o4yatnkv7g6lwm5/PagePlusSIDList.xls
16 Digit Passwords:
USCC S3 / S4 / S5 /Note 2 / Note 3 2010031619780721
USSC Note 3 (Kit Kat) 2013051320130909
Verizon S3 / S4 / S5/ Note 2 / Note 3 2009031920090615
Sprint S3 01F2030F5F678FF9 or 2012112120131219
Sprint S4 / S5 2012112120131219
Sprint Note 2 / Note 3 2012112120131219
Metro PCS S3 2FF811282FF9F323
Cricket S3: 2010031619780721
Cricket S4: 01F2030F5F678FF9
Gusto (Friend) U365 2011101116083112
Working PRL's by Original Carrier phone:
Sprint
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
52896 PRL https://www.dropbox.com/s/r47fa53i32c3596/52896-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/fphctk79gf7k0cd/53269PPlus.prl
Verizon
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
53078 PRL https://www.dropbox.com/s/1nd3erjcpkym55v/53078.prl
53126 PRL https://www.dropbox.com/s/u1i4w9kqfj609fr/53126verizon.prl
53188 PRL https://www.dropbox.com/s/l9rqhbvrgqiochc/53188verizon.prl
53160 Selectel PRL https://www.dropbox.com/s/vc0i0pea8igr78d/53160.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
US Cellular
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
What is a PRL and what it does:
PRL=(Preferred Roaming List)
The PRL is a list of information that resides in the memory of some kinds of digital phones. It lists the radio frequencies the phone can use in various geographic areas.
The part of the list for each area is ordered by the bands the phone should try to use first. Therefore it's a kind of priority list for which towers the phone should use.
The PRL helps determine which home-network towers to use, and also which towers belonging to other networks to use in roaming situations (areas where the home network
has no coverage.) When roaming, the PRL may instruct the phone to use the network with the best roaming rate for the carrier, rather than the one with the strongest signal at the moment.
Since a PRL tells the phone "where" to search for a signal, as carrier networks change over time, an updated PRL may be required for a phone to "see" all of the coverage that it should,
both with the home network and for roaming.
10.key if needed:
10.key https://www.dropbox.com/s/ybyi51lodiislt5/10.key
PagePlus APN:
https://www.dropbox.com/s/h81z8am5pk0tr7g/apnpageplus.zip
The Best MMS Apk by far fully Flash Compatible
Version 1.31: http://8s.ms/download/releases/8sms-1.31.apk
Read all about it: (I have tested works on all carrier phones)
http://8s.ms/
(Settings
Instructions Below:
Setup Instructions Below:
1) Launch 8sms app.
2) Press Menu button on your phone.
3) Choose Settings
4) Choose MMSC Settings
5) Press "MMSC".
6) Type in "http://mms.vtext.com/servlets/mms?X-VZW-MDN=Your Phone number including area code" do not include the double quotes. Press OK button. EXample: http://mms.vtext.com/servlets/mms?X-VZW-MDN=7792559415
7) Press "MMS PROXY".
8) Make it Blank
9) Press "MMS PORT".
10) Make it Blank
Press OK button.
Press the Phones Back Button
Choose Phone number under the extra settings and enter your 10 digit phone number then press the ok button.....
Restart the Phone.........
DONE..................
____________________________________________________________________________________________________________________
Working MMS Program:
USSC/Verizon MMS Messages (Must be on JB and up to use)
This MMS apk. will keep you from having the issue of when sending a MMS it showing up as the Phone Number on the Sim Card
https://www.dropbox.com/s/eclk63eyssz4to6/workingmms2.apk
When you install the apk and open, it will ask you the carrier you flashed the phone to, along with the phone number. It is very important that you fill this information in. If you fail to do so, the apk will not function.
Verizon Messages (Messaging Apk. for use with Flashed phones)
https://play.google.com/store/apps/details?id=com.verizon.messaging.vzmsgs
Slightly Themed Version of Verizon Messages:
https://www.dropbox.com/s/w9kmkyhpkj6ljnr/vzmThemed.apk
Voicemail Notification Apk for Flashed Phones (Does not suppose to have ads):
https://www.dropbox.com/s/32lvu0n7dlill84/voicemailnotifier.apk
DFS latest
http://cdmatool.com/downloadFiles/application/Setup DFS 14.04.16.0.zip
QPST 2.7.402
https://www.dropbox.com/s/4et0l079vnf0jir/QPST.2.7.402.msi
Hidden menu Apk:
https://www.dropbox.com/s/hefr96pykkuifj1/HiddenMenu_No_Root.apk
Samsung Drivers
http://www.samsung.com/us/support/owners/product/SCH-I545ZKAVZW#

Helpful Tips:
How to Enter Diag Mode by Carrier Phone:
Sprint SPH-L710 (Galaxy S III) and SPH-L900 (Note 2)
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Sprint SPH-L720 (Galaxy S4,S5)
There are two options to dial for diag menu on this phone
##3424# and *#7284#
One will ask for an SPC Code and One will Not
Use the one that does not ask for SPC Code
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) up to 4.2.2 Android Version
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial **87284
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) 4.3 Android Version
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
Verizon SPH-I545/SM-G900F (Galaxy S4, S5) / Galaxy Stellar I200 4.1.2
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) up to 4.1.2 Android Only
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#7284#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) 4.3 Android Only
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
_______________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4) under 4.3
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#0808#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
__________________________________________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4, S5) 4.3
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
APK to Get SPC/MSL on Sprint Phones running 4.3 Android
https://www.dropbox.com/s/gy1729al1zn4hzg/SPCUtility .apk
_______________________________________________________________________________________________________________________
Utility to Get in Diag Mode.......
https://www.dropbox.com/s/555mcjdpcp3vem3/PhoneUtilss.apk
_______________________________________________________________________________________________________________________
How to Bypass Verizon S3 Activation Screen without Sim Card
While in Portrait Mode of the Languge Screen
- Tap below the last language, Left side - Right Side
- Left Side - Right Side
- Volume up Button.
____________________________________________________________________________________________________________________________________________________
YouTube Fix for Sprint Flashed Phones:
Dial ##3282#
Enter SPC (000000)
Look through Menus and find the options to change the below, and modify them to below settings
RSTP Proxy Port
0
RSTP Proxy Address
0.0.0.0
HTTP PD Proxy Port
0
HTTP PD Proxy Address
0.0.0.0
____________________________________________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Remove No Sim Card Icon from Taskbar
Must be Rooted
Use BuildProp Editor here to edit: https://www.dropbox.com/s/srnoi9qwzggujex/com.jrummy.apps.build.prop.editor-1.apk
Ad the Below line to Build Prop at the very bottom
ro.config.donot_nosim=true
Tap Save and reboot
_______________________________________________________________________________________________________________________
Verizon S3 i535 Casual Root/Unlock/Recovery
(THIS IS ONLY COMPATIBLE WITH FIRMWARES UP TO 4.1.2 MF1 if you try on any other versions you will BRICK your device)
Easy way to Root/Unlock/Install Recovery Verizon S3 Only
http://forum.xda-developers.com/showthread.php?t=2332825
**As always use at your own Risk... This is not my work.... Give credit and thanks to the developers of the methods please**
_______________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Android 4.3 Upgrade Methods for Verizon and Sprint Phones
DO NOT DOWNLOAD THESE FILES AND ATTEMPT UNLESS YOU ARE 100% SURE YOU KNOW WHAT YOU ARE DOING
THIS WILL LOCK YOUR BOOTLOADER FOREVER NO GOING BACK TO PREVIOUS VERSIONS EVER
Let me stress that anytime you flash either with ODIN or normal methods you take the chance of BRICKING your device.
SO be sure you know what you are doing as I am not responsible for anything that may go wrong.....
These will wipe your devices and bring the phone back to like is what was brand new, and should not affect your flash, but then again do at your own risk.....
______________________________________________________________________________________________________________________
ODIN 3.07 Program to use for the Update: https://www.dropbox.com/s/zjw7zhr9br...Odin_v3.07.rar
Flashing Firmware with Odin Instructions:
1. Put your phone into download mode. To do this turn the phone off and then press volume down+home button+power button at the same time. You will then get a warning saying press up to continue and down to cancel, press volume up and you are now in download mode
2. Start Odin
3.At this point please make sure that ONLY TWO OPTIONS TICKED are "Auto Reboot" and "F.Reset Time" (otherwise you could end up with a very expensive paperweight)
4. Select the PDA button in the Odin program: Direst it to the tar file that you are using to upgrade the one you downloaded for your device......
5. Plug your Phone into the computer, wait for the drivers to install and then wait for the ID:COM section to turn blue in ODIN.
7.Press start and the flash will begin, once this has started do not remove the usb cable or turn off your computer or the device (or you will have brick for sure) the phone will reboot once the flash has finished.
8. All Done Enjoy 4.3
______________________________________________________________________________________________________________________
SPRINT S3 ONLY 4.3 Jelly Bean L710VPUCMK3
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link 1:
http://terafile.co/243485193552/L710...UCMK3_HOME.zip
Link 2:
http://ul.to/q2tqpepc
Link 3:
http://rg.to/file/d084d17f683d047600...ginal.zip.html
__________________________________________________ __________________________________________________________________
Verizon S3 ONLY 4.3 Jelly Bean I535VRUCML1
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://www.androidfilehost.com/?fid=23269279319199798
_____________________________________________________________________________________________________________________
Verizon S4 ONLY 4.3 Jelly Bean I545VZWEMK2
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://terafile.co/99d3fb3e0855/VZW_I545VRUEMK2_I545VZWEMK2.zip
______________________________________________________________________________________________________________________
SAFEROOT
Safe Method to Root Only the Device: (This will work on other versions OF Android also) Does not include Custom Recovery (ROOT ONLY)
Will not trip KNOX for warranty purposes either:
Link:
http://forum.xda-developers.com/showthread.php?t=2565758&highlight=s3
Before you try using this rooting program, you'll need to have the USB drivers installed for your phone: (Linked Below)
Drivers Download: https://www.dropbox.com/s/8n1bl5uusy... (2).exe
Step 1 - Install Drivers Above
Step 2 - Enable USB Debugging
Step 3 - Unzip the saferoot.zip
Step 4 - Root your phone
Double click on the "install.bat" to run the root. It will root and reboot your phone. Once that's done, you're rooted!
(Follow Instructions that are included in exploit)
remember you cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
______________________________________________________________________________________________________________________
Things Not To Do With A Flashed Phone
1. NO OTA Android Updates Period (You will break your flash)
2. No OTA Programming *228, *22890, *22800, *22801 or any other Variants
3. Some Rom's do not play well with Flashed Phones do your research before flashing.
4. Never do a RTN (Return to Network) Reset ##786# on a Flashed Device (Most definitely will break your flash)
5. Some Radios/Modems cause issues if you flash (If the phone is working leave it be)
6. Factory Reset ( I recommend not to do this also, some versions of Android phones it will break things period)
7. PRLS ..... aww my favorite, everyone thinks these are the answer to all their prayers
a. If the phone is working leave it be (my personal stance)
b. Some PRL's are not EVDO or have not been Modded and will break your 3G or throw the Roaming Symbol
c. I have posted many PRL's above that will work with 3G (Latest one I modded is 60007 for all carrier phones)
8. No Phone Number Change (You change your carrier assigned number, you must reflash)
_______________________________________________________________________________________________________________________
Why Is My 3G Data Slow?
It's a complaint I hear everyday from people using flashed smartphones performed by them or another flashing provider...
Why are my speeds so slow and is it possible to improve the situation?
There are a variety of reasons why 3G data speeds may be less than stellar, and each one requires a different solution.
Before assuming there's a problem, though, make sure you understand the realistic capabilities of your service.
VERIZON/Page Plus/Selectel:
2G 1xRTT: 50-100kbps download and upload with bursts to 144 kbps
3G EVDO Rev-A: (shows up as "3G" on your phone): 600-1400kbps download with bursts to 3Mbps, 200-800kbps upload with bursts to 1.8Mbps
(Don't get to caught up in running speedtest as these can be very confusing and fool you at times into thinking you have a problem when actually
the way they test and the servers they use get congested also)
POTENTIAL PROBLEM #1: Weak signal
If you're too far away from the tower (or if there are a lot of obstructions/interference between you and the tower), your device won't be able
to pick up a strong signal and your performance will suffer.
Solution: Try other locations in your home or area you are in, some areas do not get great signal strength and this could be your issue.
POTENTIAL PROBLEM #2: Tower overcrowding (Network Congestion)
The bandwidth available from a cell tower is shared amongst all the users connecting to the tower. A cell tower can only provide so much bandwidth,
and the more users there are connecting to the tower, the slower everyone's speeds will be.
Is this YOUR problem? If you notice that your speeds tend to follow a pattern most days (for example, nice and fast late at night or early in the day but slower in the evening when everyone is home from work and school) and you've confirmed that the problem isn't signal-related (by testing your speeds at home and then again somewhere closer to the tower), you'll know your tower is simply being used by lots of other subscribers at the same time.
Solution: Unfortunately, there's nothing you can do about this (other than consider switching to a different provider who might have more capacity at their towers or isn't as oversold in your area).
POTENTIAL PROBLEM #3: Incorrectly Performed Flash
It's very common for flashed phones to have been done incorrectly.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done incorrectly or you made changes to your setup recently.
Solution: You'll need to either troubleshoot the phone and or reflash the problem phone.
POTENTIAL PROBLEM #4: Tower issues
Providers periodically do maintenance or upgrade work on cell towers, which can disrupt service; other factors like severe weather occasionally damage cell towers and cause problems.
Is this YOUR problem? If your service suddenly degrades significantly and doesn't improve much during non-peak hours (which it would if the problem was overcrowding), and you've confirmed it's not a problem with your flash, the problem likely lies with the tower. The best way to confirm is to take your device several miles away where you'll be connecting to a different tower and test there — if everything works fine when connected to a different tower, you'll know something is amiss with your home tower.
Solution: Out of your control, bear with it until the provider finishes work and repairs.....
Potential Problem #5: Sprint and USSC Devices
I hate to say it but I have seen some Sprint/USSC phones have this issue, likely due to weaker radios and or hardware implemented in the device.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done correctly and you verify that other devices on the network in the same location as yours get consistently better data speeds.
Solution: Verify flash is correct and that your connected at EVDO in settings and passwords have passed authentication. If so this most likely a Sprint/USSC device issue out of control by the user. Replace device with another Cellphone Carrier brand and most of the time problem will be solved. (I see this allot with some of the Samsung S3 Devices from Sprint/USSC, almost like certain lots had a weak radio for whatever reason)
In the end your speeds can be related to any or all of these issues, and a proper flash is key to performing at optimal speeds.
Sometimes as much as we hate to admit a professional flasher is needed to correct speed issues, you would not believe some of the poor flashes I see when I read preflashed phones everyday that so called profesSB_Driver_1.5.1

Reserved.................

Viper32 said:
Reserved.................
Click to expand...
Click to collapse
Wow really surprised this topic has gained no attention......
Anyways if anyone has any questions reply here or message me.....
Viper

I flashed my phone to verizon prepaid but wanted to give pageplus since all of the issues with mifi. Will I need to get cdma workshop and are you gonna post a guide?

thatguythatdid said:
I flashed my phone to verizon prepaid but wanted to give pageplus since all of the issues with mifi. Will I need to get cdma workshop and are you gonna post a guide?
Click to expand...
Click to collapse
Just PM me

If only it had 4g I'd switch.
Sent from my SCH-I535 using Tapatalk 2

Is it possible to do this with an older samsung fascinate or droid x2? I got a buddy who is in need of a prepaid account and I wonder if we could use one of my old devices that still works.

TheDiabolicaL1 said:
Is it possible to do this with an older samsung fascinate or droid x2? I got a buddy who is in need of a prepaid account and I wonder if we could use one of my old devices that still works.
Click to expand...
Click to collapse
Shouldn't you be able to do these old phones w/ Page Plus, no problem?

Flashing help
I have 2 phones that I need to get flashed over to pageplus. 1 Galaxy S2 sch-R760 and 1 Galaxy S2 sph-D710. I have been reading and trying to find complete tuts or a reasonably priced service to get these flashed over but no one seems to be able to get 3g working. The R760 I had flashed to PP but I only get 1x data speeds. I have not tried to do the D710 yet. My wife and I are already on pageplus with a DroidX and a Droid X2 so I guess during the flashing process you have to get or PP telephone numbers on the phones since you cannot do a normal ESN swap with customer support on flashed phones. Can anyone help?

dcpr5480 said:
I have 2 phones that I need to get flashed over to pageplus. 1 Galaxy S2 sch-R760 and 1 Galaxy S2 sph-D710. I have been reading and trying to find complete tuts or a reasonably priced service to get these flashed over but no one seems to be able to get 3g working. The R760 I had flashed to PP but I only get 1x data speeds. I have not tried to do the D710 yet. My wife and I are already on pageplus with a DroidX and a Droid X2 so I guess during the flashing process you have to get or PP telephone numbers on the phones since you cannot do a normal ESN swap with customer support on flashed phones. Can anyone help?
Click to expand...
Click to collapse
PM me I can help you out........
Viper

Can anyone verify 3g will work?
Sent from my S3, because iPhone is faget.

warbdan said:
Can anyone verify 3g will work?
Sent from my S3, because iPhone is faget.
Click to expand...
Click to collapse
Yeah I can, since I do them everyday
Viper

Tried to pm you, but I don't think it sent. Is there a way I can flash the prl and get 3g on my phone with net10 or do I need to flash to pp?
Sent from my S3, because iPhone is faget.

Galaxy Nexus i515 to Page Plus
Viper,
I have sent you a PM on this. I have been trying to get it to work by reading through the thread - http://forum.xda-developers.com/showthread.php?t=1696621 but to no avail. Appreciate if you could help. I am ok with not having 3G if the solution is not complicated.

Long time PP user with new (to me) SIII
Ill send you a pm. I would like to get this working for my wife. I love to tinker and have flashed old VZW phones when we first came to PP, but time is limited for me.
Thanks!

I'm trying to pm you, Viper, but for some reason messages aren't going through. Are you around for a flashing?

First thanks forbthe topic and help. I need to know how to un flash my s3 so I can use it on my contract. I traded for this s3 and did not know it was flashed to pageplus. All help is greatly appreciated.
Happy fathers day.
Sent from my SCH-I535 using xda app-developers app

Trying to get 3g on your verizon galaxy s3? Stop searching. Viper is awesome! 1000 thanks, man!