Database Info

unrecoverable soft brick even with USB JIG

so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.

muleman said:
so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.
Click to expand...
Click to collapse
Hmm I'd say if the USB jig didn't work, you're not soft bricked. That's a hard brick.
What kind of USB jig are you using?
Was it a ROM or a kernel you flashed? which one, version etc.?

Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG

donation rewards for anybody that can help! lol this is depressing, my old captivate isnt this sensitive and has been through hell and back, but this SGS4g.... im dissappointed in.

Uninstall all the drivers for the phone make sure you have the right ones also, and try plugging it into a usb 2.0 slot then run it again, this seemed to work for me. I ran into the same issue I plugged in my jig but it gave me a black screen, but odin recognized it and I flashedthe kd1 update and it was fixed. Hope this helps

muleman said:
Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG
Click to expand...
Click to collapse
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.

Along with what krylon said, maybe a bad download, try download file again
Sent from my SGH-T959V using XDA Premium App

will do thanks guys, ill try it tonight and let ya know how it goes for me.

i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now

krylon360 said:
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.
Click to expand...
Click to collapse
youre the man.... Thanks much

muleman said:
i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now
Click to expand...
Click to collapse
Heimdall works at that same warning screen too. I've done it on my SGS4G.

I am confused..
sgyee said:
Heimdall works at that same warning screen too. I've done it on my SGS4G.
Click to expand...
Click to collapse
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??

amishraa said:
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??
Click to expand...
Click to collapse
If its currently in the state which I'm assuming..
-won't turn on, no sign of life period...
-plugging it in the wall charger won't even show the green battery status...
-won't get recognized when plugged into pc (or odin)...
-all combinations of buttons and battery pulling+usb cable plugging does nothing...
Yea I think its safe to say it went to a land far far away just like my friend's phone and only Samsung can revive it now.. Because I remember reading all the stories how everyone brought theres back to life so easily with the button combos or the jig usage, but those phones all at least showed a sign of life with that cable screen. But if its pitch black like I'm assuming then...

Same here. The jig didn't seem to work - I still got the cell + comp but odin worked anyway and reflashed stock. It's probably better to run Odin off a desktop if you have one.

That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.

That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. In most cases I have been able recognize the phone using odin. A few of the key steps that I have used to get the phone recognizable in odin are:
1. If the computer says "usb not recognized" when initially plugging in the phone, uplug it and plug it back in. Most of the time when I do this the phone is recognized as samsung device.
1b: If odin now recognizes the phone after running through step 1 I will try to flash the files again. it will usually fail after trying to load the flash files on the first try. I have to mess around with this process a few times and I can usually get a successful flash.
2. I had an case when having to deal with this problem yesterday. I was running through steps 1,1b and not having success. Odin was hanging, (I forget which step). I let it sit for about 10 minutes and was still hanging. I unplugged the phone with odin still hanging pulled battery, powered on, plugged back in. Odin, which was still open and still trying to connect, continued its already started process after plugging it back in!!! This was an accident to still have the odin running and trying to connect, but after reconnecting the phone it successfully flashed!
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
These kind of observations are especially helpful! I can concur that I get the same <phone..!..pc> error, when odin tries to flash and gets a write fail, however, I do not have the "re-partition" option set. I then have to run through my previously mentioned steps to try to get a successful flash.
My question is what can i do to keep odin from failing to write when flashing?? I have only been using PDA packages, with the exception of using discrete packages (pit,csc,phone,pda) when loading the 2.3.4 rom leak.
It seems like the flashing write error in odin in causing the <phone..!..pc> error quite often with different flash processes. Does anyone have a solution to what might be causing this write error and what can be done to prevent this whole cycle? If so I sticky or new thread might be useful for other users. It has caused to have to warranty my first phone, urrrg!

Scariest feeling ever........ Not seeing your phone come up on Odin.
Sent from my SGH-T959V using XDA Premium App

Woops ahahahha. Was talkin to my friend. SOrry!

fvnktion said:
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. ..... [cut] ......
Click to expand...
Click to collapse
I had the same issue yesterday, when I tried to flash KD1 vanilla (stock) ROM
using ODIN, it failed the first 4 seconds, it boots into fuzzy looking screen and
that's it, every time I tried to boot it the fuzzy screen fades away to pitch black.
there is 2 possibilities that messed up the whole thing for me:
1) Bad ROM.. (i.e, can't be used with ODIN) although some members said it works
but don't know if there anything special to do before hand, if I want to downgrade.
2) Samsung Kies' fault, I installed just right before I used ODIN, and told me my
device is not registered.. hmm.
It could be both cases, but I suspect Kies the culprit, I had to uninstall it, and
uninstall the drivers came with it, installed the drivers found here in these forums,
and Odin recognized a COM port, although black screen on the phone, flashed
to KH1 and I am back to business. phew..
GB is awesome, but I can't stand the weak WIFI issue even with the latest KH1
I have to stand 3 feet away from my router to get a solid signal, with froyo
vanilla rom, I was able to connect like 50 feet away. but that's another problem
not for this thread.
Heh funny thing I read today in some thread, there is a conflict between Kies and
Odin after the incident happened. my fault for not reading a lot, jumping the gun
almost cost me the phone :/

I May Have Bricked It

I was playing around last night with updating my phone with a different and everything was fine. Today, I installed the proper kernel and it installed and ran fine. I decided I would install a different kernel, one that has audio via USB for the dock and after I selected the file with Odin, I started the install and then I noticed Odin said something about it being finished and removed. Now I started my phone and it just sits at the screen that says Galaxy S. The phone will not start and I cannot get into recovery or download mode. I have tried every button combination I could find online. Does anyone have any suggestions on how I can get into either download mode to install the kernel again, or recovery so I can just install the zip to reload the software.

Have you tried a jig or adb to get into download mode?
Sent from 234 Elm Street

I have never been able to properly get adb working, I know I am doing something wrong, but I actually just finally got it working. I was able to use One Click Root to have it restart my phone into recovery mode and I was able to reinstall the software and kernel. Everything is going good now, except I can't use the kernel I wanted to use because I don't know if it has CWM3.
This is the kernel that I actually wanna install.
http://forum.xda-developers.com/showthread.php?t=916233

You have SOFT bricked it which means you can get it out of it without JTAG at this point. Go to YouTube and search ODIN 1 Click and watch the video I made to help flash stock firmware.

Any updates OP?

Have you tried taking out and reinserting the battery then volume up, volume down while inserting your USB cable? That saved me one time. Then I bought a JIG.

Thanks for all the help, but I actually figured it out. I had forgotten I installed bootloaders and it changed the button combinations for Continuum.

Did I completely mess up my Captivate?

So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.

I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps

hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.

However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.

asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!

Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..

It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh

Connection issue in my sig

Any chance you have another pc to try it with? Or possibly another cable?

Going to try one click on ubuntu...

Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).

try one click unbrick in the android development page

hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?

I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U

I'm in a little trouble here.

Well, Ive been flashing roms for a while now and I have an issue with my captivate.
Lets start in the beginning. I had my captivate on THS ICS rom and It was going great. But my captivate isn't that great anymore. The power button is broken, but I was able to go around that. (Sidenote: It turns on when I plug in the battery.) Anyway, I wanted to go back to stock because I did have the right bootloaders. (I couldnt get into download mode with the button combination. I thought it was the bootloaders fault. Im I wrong?) I wanted to switch to I9000 bootloaders but I had to start fresh. But before all that, I noticed that while I was on ICS rom, I was unable to go to download mode. I used to before, but it magically disappeared (I know it didnt, I know I did something to it but I don't quite remember when it happened.) So I was unable to flash a new rom, if I wanted to.
A couple of days ago, I bought a jig and it worked! It took me straight to download mode. So I decided to get my Captivate and make it go back to stock. So I opened Odin, it found my Cappy and I clicked start. But, it stopped at factoryfs.rfs. I waited a half hour and nothing. So I unplugged it and now it won't turn on. But it can still go into Download Mode and be seen by Odin but it just wont finish. I tried both odin one click and the regular odin. I looked everywhere for more than six hours and nothing came up. Please guys, if anyone knows what I can do to fix it, please reply.
I might have missed something, but just ask if you need any more info. Please help me.
Edit: I forgot to add this:
While I was on the ICS rom, I switched over to CM7 to see if the process of going back to stock would be easier. Thats when I tried to flash stock. It didnt work as well as I thought it would.
And I knew that I didnt have I9000 bootloaders because I installed the Icy Glitch kernel and each time I tried to have DIDDLE on it would go to deep sleep mode and I was unable to wake it back up.

As long as you can get to download mode you are fine. Try flashing a different stock from. Or using Hiemdell

I've tried both odin and Hiemdell. But with Hiemdell, it would always tell me that I dont have the drivers installed. So, it installs it for me. Even with the drivers installed, it keeps telling me that I dont have the proper drivers installed.

I have had this exact problem, where a bricked captivate can get into download mode but when restored to stock through a one-click, it freezes on the factoryfs.rfs. However, in my case after freezing at this stage, the phone was completely inoperable, and could not even enter download mode, so I am suprised yours could.
What works for me is to remove the battery, wait for a few seconds, put the battery back in, use the usb jig to enter download mode, and then WITHOUT the phone plugged into the pc, download and open this one-click file http://http://forum.xda-developers.com/showthread.php?t=731989.
Once the odin one click is open, plug the usb cable into the pc, and then into the phone. This one-click has never failed me. Hope this helps.

Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?

Juiceboy125 said:
Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?
Click to expand...
Click to collapse
Depending on the CWM recovery you're in, you can sometimes use the search capacitive key to do the same thing as the power button will do.

I had the same problem you had with Odin stopping on flashing a file, turns out I was using a third party USB cable. I switched to the USB cable provided by Samsung when I bought my cappy and problem solved. Hope that helps.
Sent from my SGH-I897 using XDA

Finally!
Well, I got my Cappy up and running again. While I was stuck in the CWM I just decided to install Gingerbread using a One click and it worked. Now I'm back to CM9. Thanks guys for the suggestions. I guess I just needed to wait and double check everything.

Help Just Soft Bricked New Samsung Galaxy S Blaze 4G SGH-T769

I followed this links w.mobilescommunity.com/android-tips-tutorial/208463-how-root-samsung-galaxy-s-blaze-4g.html[/url] instructions to a "T" and when the phone came back on it stops at the welcome screen no matter what. I tried to install ClockworkMod Recovery per these instructions /theunlockr.com/2012/04/17/how-to-root-and-install-clockworkmod-recovery-on-samsung-galaxy-blaze-4g/[/url] and it seemed to work as I get the OMR mode when I try to get the download screen without having it already cable connected to the PC. When I have it connected to the PC I am able to get to the "Download" mode. OI! I never have had a problem rooting before. The stock OS ICS 4.0.4 was on it and I bought it new from T-Mobile and then it did the OTA update a week ago. I have had nothing on it other than stock and a few camera apps. I have already tried to return it to OEM with the OMR recovery but its still the same, always booting to the welcome screen. When I try to get it into a mode, ether the recovery mode or the download mode, it sometimes vibrates several times and then "May" go into one or the other depending if its cable tethered or not. HELP PLEASE, I disabled and this is my only outside contact short of coming into town to use the Internet at a cafe. Thanks, Jeff

Blaze Soft Brick
fallendaemon said:
I followed this links w.mobilescommunity.com/android-tips-tutorial/208463-how-root-samsung-galaxy-s-blaze-4g.html[/url] instructions to a "T" and when the phone came back on it stops at the welcome screen no matter what. I tried to install ClockworkMod Recovery per these instructions /theunlockr.com/2012/04/17/how-to-root-and-install-clockworkmod-recovery-on-samsung-galaxy-blaze-4g/[/url] and it seemed to work as I get the OMR mode when I try to get the download screen without having it already cable connected to the PC. When I have it connected to the PC I am able to get to the "Download" mode. OI! I never have had a problem rooting before. The stock OS ICS 4.0.4 was on it and I bought it new from T-Mobile and then it did the OTA update a week ago. I have had nothing on it other than stock and a few camera apps. I have already tried to return it to OEM with the OMR recovery but its still the same, always booting to the welcome screen. When I try to get it into a mode, ether the recovery mode or the download mode, it sometimes vibrates several times and then "May" go into one or the other depending if its cable tethered or not. HELP PLEASE, I disabled and this is my only outside contact short of coming into town to use the Internet at a cafe. Thanks, Jeff
Click to expand...
Click to collapse
----- Did you ever get your Blaze fixed?....

pretty much the same problem i have!!! i currently have the samsung galaxy s blaze and rooted it to the custom rom from konane using the odis program, it said passed and auto rebooted my phone, but when it gets to the home screen where you touch the android to set up your phone like its brand new, when i hit the android bot all that happens is a message force closing a bunch of apps appear. i can get to the download mode to install new roms and i've tried to re root back to the stock rom but now my computer doesnt recognize my phone. i've downloaded and installed the samsung drivers from several different forums including the ones recommended here but still nothing. what im wondering is if theres a way to install the rom or driver from an sd card to the phone or something else that im missing, or is my phone just screwed? any and all help is greatly appreciated.