I am happy with what I have since the new update from Viewsonic.
If I only want to add Google Experience, marketplace, do I still need to go through the process of rooting, installing clockwork and a new UI?
Is there just a simple way to add GE to the Classic UI?
Gapps install
http://forum.xda-developers.com/showthread.php?t=842590
Everyone,
I have had zip luck with this method of installing zapps. Not a dev, but I've been doing this long enough.....
I moved the Recovery file to to /sdcard. Checked for command and command line inside that file All ok to my eye.
Downloaded the gapps file which my WinRAR pronounces a WinRAR/Zip file. So I tried renamein the original update.zip and didn't get any install. So I extracted using winRAR. Still no install.
I tried the permutations as well. Extracted using G-Tablet extract. Still no results.
There must be something I am missing here -- too much holiday cheer or too many crowds or whatever.
Suggestions?!
Rev
butchconner said:
Everyone,
I have had zip luck with this method of installing zapps. Not a dev, but I've been doing this long enough.....
I moved the Recovery file to to /sdcard. Checked for command and command line inside that file All ok to my eye.
Downloaded the gapps file which my WinRAR pronounces a WinRAR/Zip file. So I tried renamein the original update.zip and didn't get any install. So I extracted using winRAR. Still no install.
I tried the permutations as well. Extracted using G-Tablet extract. Still no results.
There must be something I am missing here -- too much holiday cheer or too many crowds or whatever.
Suggestions?!
Rev
Click to expand...
Click to collapse
I HAD to resort to putting on Clockwork Mod 0.8 to get GApps on my G Tablet.
Putting the update.zip on the internal and sd card storage did not work for me either with the newest update installed.
Clockwork Mod is a super easy install - just follow the instructions on how to install G Apps...basically: put CWM on your SD card in it's root (meaning NOT in any directories) and rename it update.zip, put the corresponding recovery directory on the SD as well. I use Winrar as well, I drag the recovery directory right from the file itself and to the SD Card.
Will look like:
Drive: update.zip
Drive: /recovery/command
basically.
Flash it the normal stock way (power and volume +). I press Power and Volume + without even powering off the device, because if the device is powered down and then you start it and miss that first start up, the device WILL delete the recovery/command file and the update won't flash.
GL
I don't officially get to play with my GTab until after package opening tomorrow so I can't do anything today, but I'm trying to line up my to do list. I have never rooted, flashed, or modded anything but am not afraid to play around as long as I don't brick the tablet.
What do you mean when you say "put the corresponding recovery directory on the SD as well. I use Winrar as well"? What is the corresponding recovery directory? What do you use Winrar for? I Googled "winrar" and found " WinRAR is a shareware file archiver and data compression utility developed by Eugene Roshal, and first released in the fall of 1993.[1] It is one of the few applications that is able to create RAR archives natively, because the encoding method is held to be proprietary. " I cannot figure out why it would be needed to load the standard Android market.
MSU_Sparty,
When you do updates (or installs) that have to be flashed onto the internal sdcard, they usually com in pairs of files. You will have an update.zip file that has the update in it (DUH!) -- and accompanying it will be a "Recovery" directory that has a command file in it (The command file has only one line that "calls" the update.zip file.
WinRAR "Zip" utility enters the picture because most of the devs here use WinRAR to package updates. The when they tell you to decompress it, you use WiinRAR and are left with a .zip file to install.
That's the question I had about this update. The Gapp file show to be a RAR package, but when I un-RAR it I come up with no .zip file -- only regular files.
Hope this helps you understand.
Rev
P. S. -- If you are new to this business, take it slow and easy and read ahead on this site and make sure you understand what you are doing. I try to do that, but even with years of IT experience I still mess things up once in a while.
Neoprimal,
Thanks for the tip about CWM. I have two tablets and the other has CWM on it and is fairly modded.
But this tablet I am trying to keep basically stock so I can get updates, etc. and see what the "state of product" is.
As mentioned in my previous answer, I am stumped because I am not getting what looks to be an update.zip file from the Gapp download. When I use WinRAR to decompress the Gapp file, I don't get a .zip file -- only a couple of directories. On the other hand, when I rename the Gapp file update.zip and try to flash it it doesn't work.
Again, thanks for the reply.
Anyone else with suggestions!!!????
Rev
Thanks. What you've written really does clarify the previous post. I appreciate it.
But let me ask another naive question. Why don't the developers create their update programs so they can be installed by just downloading them OTA like most applications? That would sure make it easier for neophytes. I'm guessing that the reason is because we aren't really adding an application but replacing the OS.
I greatly appreciate your guidance and that of all of the folks who use this forum.
Happy Holidays!
*updated 2/2/2011*
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt. Also, HUGE thanks to Stoney 666 for giving me the software to convert images to .rgb565 and to CYBERxNUKE for creating it.
*Note*
all filenames in this process are case sensitive. Don't capitalize it if it's not capitalized and don't lower case it if it's not lowercase. Also, do not add extensions unless you're instructed to. Doing any of these can mess up the process.
**UPDATE 10/1/11**
Updated a working PC36IMG.zip (in the attachments in the bottom). The last one was corrupt and the Unrevoked website goes down sometimes.
**UPDATE 10/24/11**
Added up a pro tip for people who want to make their own Splash screens and not just make their own Splash PC36IMG.zip.
Okay, rewriting this process from scratch because, well it's easier that way.
PART 1 (if you downloaded a splash screen image from the Themes and Apps Section of the Evo forums in XDA, the proceed directly to PART 2).
1. Download the EVOSplash Zip from the attachments.
2. Open the howto.txt file inside for instructions on how to use it. With this program, you can convert a file into the required .rgb565 file.
3. Rename the converted .rgb565 file splash1.img
PART 2 (if you have your file all ready to go)
*note* if you have not done so, rename the splash picture to splash1.img
1. Go to this website: http://unrevoked.com/rootwiki/doku.php/public/forever
2. Download the original PC36IMG.zip file (it's close to the bottom)
3. Use a .zip editor (winzip, 7zip, etc) to open it.
*ehem* DO NOT EXTRACT, JUST OPEN
4. Replace the splash1.img in the zip with the one you have/just made. Save it.
5. Plug your phone in, connect to PC via disk drive.
6. Put the PC36IMG onto the root of your SD card (for newbies, that's the very first page of the SD card).
7. Reboot phone into bootloader (turn off, volume down + power)
8. The phone should recognize the zip and ask if you want to update. Select yes (I believe it's volume up for yes).
The zip will install and you're new splash screen should be there next time the phone reboots.
I hope this helps a lot and thanks to everyone who's read it and been patient. It took me a month to thread jumping before I found a process that worked with hboot 2.02 and 2.10 (I have 2.10). This is also the easiest way for people who are uncomfortable with adb and the command prompt.
Give me a thanks if it helped, I do this for free so I don't accept donations
**PRO TIP**
If you want it to fit the whole screen (or to make your own from scratch), use a photo or paint like program (Photoshop, etc). Make a new file that is 480 pixels wide and 800 pixels for height. Then re-size the picture you want to use in it (another tip: use a picture that is bigger than 480x800. If it's smaller, it'll get fuzzy and become lower quality) to fit the borders of the new file. Alternatively, you can make your own. Save as JPEG when you're done, then follow the instructions above.
Followed the process, it's not working for me. I don't get a prompt to update in hboot. PC36IMG.zip is on the root of my SD card. =/
EDIT: When I boot back into CM6 and look at the root of my SD card the .zip is gone...
EDIT2: Diagnosed and fixed, had to make the PC36IMG.zip rwx-rwx-rwx. Flashed just fine!
what about users with hboot 0.93.0000?
AbsolutZeroGI said:
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt.
Okay here we go. This process is to install custom splash screens without having to use the command prompt or fastboot. Users who have hboot 2.02 and 2.10 CANNOT use the command prompt anyway so this is the workaround for those people.
1. Download the PC36IMG.zip from the attachments.
2. Find the splash screen you want and rename it splash1.img (don't worry about any warnings about it not being usable, Android is smarter than Windows).
3. Open the .zip and delete the splash1.img that's already there and replace it with the one you downloaded.
4. Plug your phone in, select "disk drive".
5. Move the .zip file into the first page (or root page) of your sd card.
6. Remount sd card (not necessarily important, but recommended).
7. Power Down
8. Load into Hboot (volume down + power)
9. Hboot will recognize the .zip as an update and will ask if you want to install it, hit volume up to install.
10. Reboot and enjoy your new splash screen.
If this gets a sticky, so be it, if not, I am going to PM the OP of the sticky'd thread with all the splash screens and ask him if he'd put this guide in there.
I hope this helps some people, it sure helped me.
Click to expand...
Click to collapse
you forgot to mention that the image used for the splash needs to be in .rgb565 format before renaming it to splash1.img, and has to be saved as a 24bit rgb bmp or png file before converting to .rgb565.... use this to convert the images to .rgb565 View attachment EVOSplash.zip there is also a "how to" in the zip.
or to make your life easier, go here... http://forum.xda-developers.com/showthread.php?t=812572 and i'll make one for you...
Stoney 666 said:
you forgot to mention that the image used for the splash needs to be in .rgb565 format before renaming it to splash1.img, and has to be saved as a 24bit rgb bmp or png file before converting to .rgb565.... use this to convert the images to .rgb565 View attachment 481035 there is also a "how to" in the zip.
or to make your life easier, go here... http://forum.xda-developers.com/showthread.php?t=812572 and i'll make one for you...
Click to expand...
Click to collapse
Thanks, all the splash files i've downloaded so far have been in .rgb565 so far but this is definitely useful information, especially if people want to make their own.
meansixx said:
what about users with hboot 0.93.0000?
Click to expand...
Click to collapse
This is compatible with all hboots. It's just that people with the two newest ones can't use any other method (to my knowledge) except this one so I thought it was guide worthy. Most of the threads that have splash screens have alternate instructions.
*bump*
people still need this, I wish I could get it sticky'd
problem installing splash screen
I am having the same problem as above, I have read alot on this fourm and still cannot get a different splash screen up. Im looking to install the stock flash for the evo. I'm getting an error no image found please help.
Thanks...
I found
a flashable zip of the stock splash screen, and it worked, but I would still like to know how to do this. I wanted to put on the red evo skelton giving the finger.
pgagolfer said:
a flashable zip of the stock splash screen, and it worked, but I would still like to know how to do this. I wanted to put on the red evo skelton giving the finger.
Click to expand...
Click to collapse
When you add the image to the Evo, make sure it's in it's native resolution (my instructions only cover splash screens from this forum, which is 800x480).
For further info, read Stoney 666's post, that's how you do it if your image doesn't start in the right file type.
Thanks.
Got it to work, not sure how, i think i used a different PC36IMG file, or I took zip off the ending.
pgagolfer said:
Got it to work, not sure how, i think i used a different PC36IMG file, or I took zip off the ending.
Click to expand...
Click to collapse
Even if you take off the .zip it's still a zip so one way or the other it works I just uploaded the PC36IMG file I found on the Unrevoked website.
Glad you got it to work!
Ok, I'm not doing something right. I downloaded the PC36IMG.zip, opened it, replaced the file with the splash screen I wanted, and re-zipped the file. Put it on the root of my sd card, and started it in bootloader. First, it didn't prompt me to update, although when it checked the sd card for updates, I did note that it said "parsing PC36IMG.zip", but then returned to the menu. I tried flashing it from recovery as well and it didn't work.
From all the stuff I've read this seems to be the method that makes the most sense and is easiest. I've tried flashing it via ABD and a whole bunch of other stuff to no avail; my computer must not like my phone.
What am I doing wrong, I followed your steps...
EDIT: I rooted phone with unrevoked...don't know if that is why. I know that has been a roadblock with some of the other methods of changing the splash screen.
Any possible way to get this turned into a flashable zip file? Im not good with adb!
wizholt7 said:
Ok, I'm not doing something right. I downloaded the PC36IMG.zip, opened it, replaced the file with the splash screen I wanted, and re-zipped the file. Put it on the root of my sd card, and started it in bootloader. First, it didn't prompt me to update, although when it checked the sd card for updates, I did note that it said "parsing PC36IMG.zip", but then returned to the menu. I tried flashing it from recovery as well and it didn't work.
From all the stuff I've read this seems to be the method that makes the most sense and is easiest. I've tried flashing it via ABD and a whole bunch of other stuff to no avail; my computer must not like my phone.
What am I doing wrong, I followed your steps...
EDIT: I rooted phone with unrevoked...don't know if that is why. I know that has been a roadblock with some of the other methods of changing the splash screen.
Click to expand...
Click to collapse
For 1 you don't have to unzip and re-zip. Just replace the image that's already in the zip. I think a couple of people have had this problem before. I'd try again without re-zipping the package.
Also, if you didn't get the splash screen from this section of the forums (i.e. you're using your own or from a different phone in xda), go to post #4 (on the first page) and read stoney 666's post about converting the file to .rgb565 and then renaming it (not convert, rename) it to splash1.img (yes, with the file extension).
Basically, from where you are, here's what I'd do:
attempt to just replace the splash1.img file in the zip without unzipping and try again. Or, try downloading the original, untainted one here: http://unrevoked.com/rootwiki/doku.php/public/forever
and follow the steps over again.
if that doesn't work:
follow stoney 666's instructions and convert the image to .rgb565 format and then rename it to splash1.img.
That should do it.
I will also post that link in the OP and tell people to get the original instead of using mine as people have been having trouble with it.
luist4498 said:
Any possible way to get this turned into a flashable zip file? Im not good with adb!
Click to expand...
Click to collapse
I revised the instructions on the original post, it should work for you. It's not flashable in recovery, but it's flashable in bootloader which is just as good (don't need clockwork or ra recovery to do it).
I tried it again adding the file to the zip instead of unzipping, rezipping, and no dice. I'll download the PC36IMG file from unrevoke's website and see if that works.
EDIT: I just downloaded the one from unrevoked's website, and I noticed the image file it has in there by default is "splash1.img". The name of the file I am inserting is "evosplash1.rgb565". That is the correct file name, right?
Also, I just tried it with the file from unrevoked's website, still no luck. It just says "parsing PC36IMG" but doesn't do anything and returns to the bootloader options...
Ok, so I finally got it figured out, thanks to moseso. Apparently, it was because the name of the file was wrong. As I understood it, the file was to be named evosplash1.rgb565 . But I had to rename it to splash1.img . I guess it was a misunderstanding on my part, idk. But I got it now. Here is the link to the thread if anyone wants or needs it: http://forum.xda-developers.com/showthread.php?p=11113102#post11113102
wizholt7 said:
Ok, so I finally got it figured out, thanks to moseso. Apparently, it was because the name of the file was wrong. As I understood it, the file was to be named evosplash1.rgb565 . But I had to rename it to splash1.img . I guess it was a misunderstanding on my part, idk. But I got it now. Here is the link to the thread if anyone wants or needs it: http://forum.xda-developers.com/showthread.php?p=11113102#post11113102
Click to expand...
Click to collapse
It says in the OP to rename the file and always has.
Glad you got it figured out.
AbsolutZeroGI said:
*updated 2/2/2011*
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt. Also, HUGE thanks to Stoney 666 for providing the software to convert images to .rgb565.
*Note*
all filenames in this process are case sensitive. Don't capitalize it if it's not capitalized and don't lower case it if it's not lowercase. Also, do not add extensions unless you're instructed to. Doing any of these can mess up the process.
Okay, rewriting this process from scratch because, well it's easier that way.
PART 1 (if you downloaded a splash screen image from the Themes and Apps Section of the Evo forums in XDA, the proceed directly to PART 2).
1. Download the EVOSplash Zip from the attachments.
2. Open the howto.txt file inside for instructions on how to use it. With this program, you can convert a file into the required .rgb565 file.
3. Rename the converted .rgb565 file splash1.img
PART 2 (if you have your file all ready to go)
*note* if you have not done so, rename the splash picture to splash1.img
1. Go to this website: http://unrevoked.com/rootwiki/doku.php/public/forever
2. Download the original PC36IMG.zip file (it's close to the bottom)
3. Use a .zip editor (winzip, 7zip, etc) to open it.
*ehem* DO NOT EXTRACT, JUST OPEN
4. Replace the splash1.img in the zip with the one you have/just made. Save it.
5. Plug your phone in, connect to PC via disk drive.
6. Put the PC36IMG onto the root of your SD card (for newbies, that's the very first page of the SD card).
7. Reboot phone into bootloader (turn off, volume down + power)
8. The phone should recognize the zip and ask if you want to update. Select yes (I believe it's volume up for yes).
The zip will install and you're new splash screen should be there next time the phone reboots.
I hope this helps a lot and thanks to everyone who's read it and been patient. It took me a month to thread jumping before I found a process that worked with hboot 2.02 and 2.10 (I have 2.10). This is also the easiest way for people who are uncomfortable with adb and the command prompt.
Give me a thanks if it helped, I do this for free so I don't accept donations
Click to expand...
Click to collapse
maybe a really stupid question, as i can be known for those but i can be a worry wart. im using miui 1.8.5 on tiamat-evo 4.0.6 w/ sbc, and im just curious, is reflashing the stock pc36img.zip (after my file replacement, ofc) going to change ANYTHING else on my phone? been having a hell of a time keeping it running lately and i WANT to do this, but now im leery of EVERYTHING...
Hello every one!
I have a problem installing Android to my Polaris 100 in NAND, and I hope You can help me.
I followed the tutorial for NAND install on androidhtc wiki.
The problem is when I boot it says: "Install module for this kernel apply modules/androidupdate.tgz"
I downloaded from wiki androidupdate.tgz, put it in andboot folder reboot the device with vol up holding then, I selected install update and I get an error: "can`t open /sdcard/andboot/androidupdate.tar no shuch file or directory"
I have noticed the difference in extensions so I opened androidupdate.tgz and saw that androidupdate.tar is inside. I extracted androidupdate.tar from androidupdate.tgz and put it in andboot on sdcard. But i get the same error.
I have also tried with Mixer in latest Atool 1.1.4 to merge androidinstall and androidupdate but on boot i get: "Install module for this kernel apply modules/androidupdate.tgz" androidinstall.tar is also from androidhtc the release is system-froyo-all-unodex-15-01-11_18
Thank You for Your time, best regards Ivan
first mode problem:
did you place the file in andboot before click install update?
(left the file as it is, do not extract)
second mode problem:
after merging the module and the androidinstall did you extract and repack?
did you reinstall with the new android install?
@first mode problem
I have tried both, androidupdate.tgz with androidupdate.tar in it, which was originally downloaded as that from androidhtc wiki. And i have tried extracting androidupdate.tgz and put androidupdate.tar in andboot folder but I get the same error.
@second mod problem
Again i tried both ways same error...
I don`t get the last part "did you reinstall with the new android install?", I did not managed to install android on NAND at all.
BTW it`s confusing having files in multiple archives so what`s correct? Androidinstall.tar in androidinstall.tgz or just androidinstall.tar whit system folder in it? When i merge androidupdate.tgz and androidinstall.tgz with Atool I get androidinstall.tgz with androidinstall.tgz in it...
Best regards Ivan
metalac666
What i think liquid means is:
When you open Atools and you are at the mixer,
you need to apply the right module update and save it!
So here is my suggestion:
Put the Android OS in one folder on your desktop, and the update in another folder on your desktop.Also create a new folder (maybe name it andboot)where you will put the outcome of the mixing aka the new androidinstall!
Open the mixer, load the OS as usual, then click "Module update", and when it asks for a working directory point it to the folder where the update is in!!
Then mix them, and DONT FORGET to save the new androidinstall (wich comes from this procedure) on the folder i mentioned before.
hope i helped
@makousika
Thank You for the tip.
If I undersood correctly, I have to put androidinstall in folder lets call it Folder A, and androidupdate in another folder lets call it Folder B. So when I`m at Mix in atool i should add my androidinstall which is in Folder A, set a working direcotory which is Folder B, which contains androidupdate and click on Module update which download androidupdate...??? Extract it with that button that looks like Debian logo and click on save button to get my new androidinstall.
Well if I did undertood that correctly it does not work for me unfortunately.
Best regards Ivan
No, no, maybe i said it wrong...
Lets call Folder A the folder where the androidinstall is in.
And call Folder B the folder where the update is.
you open the rom mix, you hit the add icon and select Folder A.
Then, you hit the button at the right (looks like a brown box with an arrow poinitng down) the one saying "Module update". If you press it, it asks for a working directory, and you put folder B.
You mix, save, and hopefully you are done!!
If you cant do it, i have a thread where i've put up a build, take a look.
forum.xda-developers.com/showthread.php?t=921053
@makousika
I saw Your thread and tried to run Android via Haret, at first it did not work and then it hit me. I was formating my sdcard, and it changed my partition table from primary to logical. I used EASEUS Partition Master Home Edition to reformat my sdcard and change partition table from logycal to primary. Android is working via haret, probably that is why NAND install did not want to start.I will post tomorrow (today) was this really the issue for above mentioned NAND install problem that i had.
Best regards Ivan
Well ill be damned! The problem was in partition table. I have successfully installed android in nand on my pola100.
Best regards Ivan
Hi! I have the same problem in my Polaris 100 (Install module for this kernel apply modules/androidupdate.tgz). Kernel 2.6.25 was runing well but wifi wasn't working.
Same as posted here "I have an HTC [differing: Touch Pro (Alltel CDMA)]. I followed the instruction on forum.xda-developers.com for [FRX*] but it [enters an endless loop] at "task rpcrouter:15 blocked for more than 120 sec". The solution that worked in that link does not solve the same problem with a CDMA RAPH800.
The solution given there (paraphrased from that thread):
Link to the fix. The issue is caused by not having a data plan; the install gets stuck in a loop looking for a signal.
The solution that worked for a GSM phone
download RIL file from http://forum.xda-developers.com/atta...9&d=1302817139 and place in the root of microsd.
download rootfs file from http://www.megaupload.com/?d=1NGCVCTT and place in the root of microso.
add to the end of /conf/froyo.user.conf file "/sdcard/libhtcgeneric-ril.so /lib/froyo/libhtcgeneric-ril.so" before the last "}"
Please help me find a solution for a CDMA phone - next month I'd like to take a dozen of these phones and use them as learning aids in a construction course for laborers, but I cannot start testing construction applications since I cannot get the OS to work.
I'm curious as to what happens when you format your microSD and run FRX7.1MR without anything additional. Could I get you to try this method without the additional stuff?
To be explicit, I'd like you to format your microSD with something other than the Windows method and I'd like you to download THIS (if you haven't already) and THIS. Extract the contents of both files to the root of your microSD. You should see a folder called "FRX07.1" and under that folder, you should see 3 folders and 7 files. Move the contents of that folder up to the root of the microSD. Look under the folder called "STARTUPS" and locate your device type (ie RAPH800) and copy over to the root of your microSD. Once done, run Haret on your phone and let me know what happens.
do you have an application you suggest for "format your microSD with something other than the Windows method"; sourceforge did not turn up anything.
forest.peterson said:
do you have an application you suggest for "format your microSD with something other than the Windows method"; sourceforge did not turn up anything.
Click to expand...
Click to collapse
use SDFormatter
wow that SDformatter link has a lot of popups - this link feels less like I just found a date at the bus-stop sdcard.org/downloads/formatter_3 ; but it will not install on either Server2008R2 x64 or Server2003 R2 SP2 x32.
I reformatted the microSd with the format tool in Server2008R2 as FAT format. Installed the files, and boom - I see little green guys swirling around the screen. After awhile a dialog appeared "Sorry! The process com.android.phone has stopped unexpectedly. Please try again"; the dialog closed and it seems like it works! Thank you. I will try again with the HPtool and as FAT32.
Now I just need to learn how to use Android - and the screen calibration seems off? Deleting ts-calibration and rebooting to calibrate.
Glad to hear using the latest bundle works for you! Yeah, that might be a slight issue with an outdated kernel. The main thing I wanted to do is get you booted up first!
Before we continue, make sure you make a backup of your current configuration by copying the contents of the microSD and either moving it to your computer or some other storage device. This way you know you have a "working" bundle.
Next we update the kernel package from HERE; might I suggest using THIS kernel package. Be sure to delete the old files (should be located under root of the microSD and called modules-xxx and zImage) first! Extract till you see two files then rename zImage-xxx to just zImage and feel free to delete the files you extracted from. I've always created my own ts-calibration file but just wanted you to have it, "just in case".
Additionally, you may also need to update the rootfs by deleting the file called rootfs and downloading THIS file. Extract the file and rename to just rootfs and be sure to place it where the file called Haret is (default location is root of the microSD).
files are downloaded and installed - everything seems to work