Related
Hi,
I want to change the first screen when I turn on my htc magic(HBOOT-1.33.0008, PVT 32A).
But when I using this command on my PC (Phone have entered fastboot mode):
---------------------------------------
fastboot flash splash1 mysplash.rgb565
---------------------------------------
I got a error, it say:
------------------------
sending 'splash1' (300 KB)... OKAY
writing 'splash1'... INFOsignature checking...
FAILED (remote: signature verify fail)
------------------------
I don't want to flash a modded SPL, so, is there a way to flash the splash1 partition by Recovery mode?
Thanks in advance!
You need an engeneering SPL or HBOOT to do this.
http://forum.xda-developers.com/showthread.php?t=529019
I have the same problem
I thought I had the eng SPL uploaded but stll the same error message. Could it be that im following the G1 method and its different to the G2/magic/sapphire?
HBOOT-1.33.0008 is not a modded or an engenieering SPL.
Cheesebaron said:
HBOOT-1.33.0008 is not a modded or an engenieering SPL.
Click to expand...
Click to collapse
#3 is not me
I know the HBOOT-1.33.0008 is a original SPL. I'd like to know if I can flash the splash1 partition by Recovery mode.
I think you can't apply any update.zip (like roms, recoveries...) unless you change your SPL but I'm not sure.
DBeCe said:
I think you can't apply any update.zip (like roms, recoveries...) unless you change your SPL but I'm not sure.
Click to expand...
Click to collapse
No, you can apply updates and flash recoveries without flashing SPL. You need the updated SPL to flash a nandroid backup, or presumably, the splash1 screen.
bcrook said:
No, you can apply updates and flash recoveries without flashing SPL. You need the updated SPL to flash a nandroid backup, or presumably, the splash1 screen.
Click to expand...
Click to collapse
You can use the pimped out recovery image to flash a nandroid backup, and just start the pimped out recovery image via fastboot. No flashing of SPL or recovery needed for restoring nandroid.
My device came with verion 1.13.009 of the SHIP SPL.
Using fastboot, I can boot into Amon_RA's recovery, and from there I can flash unsigned images of HTC official system (created by nandroid on my wife's phone.)
As those images are unsigned, they can not be flashed directly from the SPL.
So, does the SHIP SPL only disallows flashing? Or is it only working because I flash an unsigned image of a signed ROM?
If the answer is yes, I don't see why I'd have to replace my SPL with an engineering one, when I could simply boot into the rooted recovery and flash from there.
Or do the boot/system partitions also get verified on boot?
Hi.
I was looking through the forum but I couldn't find an answer to my problem.
I had:
Code:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT - 1.33.0009 (SAPP10000)
CPLD - 12
RADIO - 3.22.20.17.
I wanted to flash AOSP 2.1 [Android 2.1] from ahmgsk (with the old radio support), so I flashed an Engineering SPL 1.33.2010 (it worked fine, I could see the new number in fastboot). After that I flashed the ROM, but it wasn't working - phone got stuck in the second boot screen (this colorful nexus stuff) - it was going on and on and on. I tried to wipe everything and flash this ROM again, but the same thing happened.
After that I assumed that for some reason is not working, so I decided to flash GyD_3.05.eu.3 - version for new radio (6. something). So I downloaded the Radio_HTC_PVT_32A_6.35.10.18.img and followed instructions from "Magic SPL HBOOT collection" topic by Amon_RA.
I did:
Code:
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot erase system -w
fastboot reboot-bootloader
It worked with no errors and fastboot showed the new radio number. In the meantime. After that I tried to flash the GyD rom, but I couldn't, because recovery was freezing after few seconds. I realized that GyD rom requires 1.76.2007 spl, so I did:
Code:
fastboot flash hboot hboot-1.76.2007.img
fastboot erase system -w
fastboot reboot-bootloader
But recovery still freezes so I can't flash any rom.
The problem is: I can go to fastboot (it's the only "stable" state of the phone right now), I can go to recovery (both: the one that I flashed on my phone and the one that I boot from my pc), but after few seconds in recovery phone freezes or reboots itself over and over (there's no rom that can be booted, so I guess that's why it reboots over and over). But because it freezes in recovery (ever if I don't do anything, just wait) I can't flash any rom...
I'm using recovery-RA-sapphire-v1.5.2H.img every time.
For now, Fastboot says:
Code:
Sapphire PVT 32A ENG S-OFF H
HBOOT - 1.76.2007 (SAPP10000)
CPLD - 12
RADIO - 6.35.10.18
Can you help me, please? I guess (hope, actually) it's not bricked, because fastboot works and recovery tries to work... maybe it's a recovery problem, or... I don't know.
Again, when you're using radio 6.35, you'll need a Hero recovery!
http://forum.xda-developers.com/showthread.php?t=561124
Ok, I'm officially a morron.
It works perfect with hero recovery...
Thanks a lot.
Actually you can use this recovery also, if you want http://www.theandroidkitchen.com/fi...download=recovery-RA-Magic32A-6.35-v1.5.2.img
I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!
so to clarify, you didn't flash a recovery image and now you don't know why you can't boot to recovery?
boot to fastboot, flash the recovery only, reboot to recovery, flash the rom of your choice and enjoy
Of course, but I cannot boot into fastboot or recovery model now.
nabor said:
Of course, but I cannot boot into fastboot or recovery model now.
Click to expand...
Click to collapse
*facepalm*
if you can't get into fastboot and you can't get into recovery you just bricked your phone.
while it's bootlooping, can you adb devices and tell us what you get?
i'm surprised that it's bricked because you forgot to flash a recovery, would have thought you could still access fastboot...
I was surprised too.
I don't know why,but I can boot into fastboot model now, but my recovery and rom are still broken.
So I tried to type "fastboot boot recovery.img" on my computer, so that I can enter recovery temporary, but here comes another trouble, it can't mount sdcard now! Display "Can't mount /dev/block/mmcblk0p1(or /dev/block/mmcblk0)(No such file or directroy) E:Can't mount SDCARD
!"
So can I use adb shell to install a ROM???
calm down bro....
you didn't brick your phone...
i've same problem after I flashed the new radio SPL HBOOT and recovery...
I've used Hero Recovery...
after u flashed your handset with new radio SPL HBOOT and Recovery, the ROM file DELETED....
so, u just download new rom (that have SAME RADIO HBOOT and Recovery with your handset)
after finished the download, put the file into ROOT SDCard... and then flash it from your RECOVERY....
I've used HERO RECOVERY....
my handset is HTC MAGIC 32A
just do that, if the problem same with me....
BRAVO
nabor said:
I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!
Click to expand...
Click to collapse
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
I don't recall the OP mentioning what handset they have. If its the MyTouch 3G Limited Edition or 1.2 (has headphone jack on top) a new user to rooting may confuse that with a Magic 32A in which case your instructions without clarifying would surely brick his phone. (Though he's on Fido, so not likely to be a MyTouch, but he didn't even mention of it was a Magic, Hero, G1, or if it was a DVT board instead of a PVT)
LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse
LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse
You shouldn't offer instructions like this. You have no idea what phone he's using. You offer such a high risk of bricking the phone since most members here fail to read instructions before running a bunch of commands.
He's fido like the above guy said which could mean he's using a rogers magic, but it's also unlikely. Fido doesn't have Magic, so he definitely got it off someone. And since it's rootable (it is unlikely that he could get a hands on a rooted magic here since their lame update) it has a high chance that its from tmo or something which = 32B board.
my phone is htc magic with 32A and it's ENG S-ON so I can't flash a recovery through fastboot, so I have to use "fastboot boot recovery.img" to use a recovery temporary just I said above. I do know that I can put a rom into a sdcard to flash it, but it can't mount sdcard now
Try waiting 30-60 seconds before accessing the SD card. Some recovery images take a while to mount the card.
I followed this guide (http://forum.xda-developers.com/showthread.php?t=605239) in order to update my radio without realizing this was for the 32A board. That means I installed, in this same order:
Engineering SPL 1.33.2010 (using recovery)
SPL HBOOT image 1.76.2007 (in fastboot)
Radio image 6.35.10.18 (in fastboot)
Anon_Ra Recovery image 1.6.2 (in fastboot)
The result is that my phone is now stuck in the green splash/welcome screen. It also can't go into recovery mode and, when in that screen, "adb devices" returns nothing and "adb remount" doesn't work. Luckily, I do have access to fastboot, so I did the following:
fastboot erase radio
fastboot erase hboot
fastboot erase recovery
fastboot flash radio myTouch-radio-2_22_23_02.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot erase system -w
fastboot reboot-bootloader
This is what my fastboot screen reads now:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.76.2007 (SAPP30000)
CPLD-10
RADIO-2.22.23.02
Aug 21 2009, 18:19:05
I still cannot go past the welcome screen, even to get into recovery.
Now, as you can see, I did use 32B-specific files for radio and recovery, but couldn't find 32B-specific SPL or HBOOT files. Is this because these are the same files for both 32A and 32B boards? Even if they weren't, how would I flash the 32B-specific Engineering SPL when I need recovery mode for that?
Any advise is appreciated. I have a nice, white paperweight right now.
Flash any of the 1.33.xxxx SPL's and you'll be fine.
Do it just like you flashed the 1.76.2007 SPL.
eyegor said:
Flash any of the 1.33.xxxx SPL's and you'll be fine.
Do it just like you flashed the 1.76.2007 SPL.
Click to expand...
Click to collapse
I am confused here. According to that thread I linked above, the 1.33.2010 (file name is update-hboot-1.33.2010-signed.zip) is the Engineering SPL and flashed via recovery mode and the 1.76.2007 (file name is hboot-1.76.2007.img) is what they call SPL HBOOT image and is flashed through fastboot. Please help me understand the difference and why you're suggesting I flash 1.33.x (the SPL HBOOT image) the way that thread indicates you should install 1.76.x (the Engineering SPL).
Also, should I do "fastboot erase hboot" before I do "fastboot flash hboot update-hboot-1.33.2010-signed.zip"?
Thanks for helping me with this.
SPL, HBOOT, bootloader are synonyms.
No, you should not erase your current one because if you happen to need to restart the phone you will end up with a brick.
It worked, as you indicated. Thank you!
sir can u share step by step
im very newbie in android, tq sir
im having a same problem too.
my current specs:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006(SAPP10000)
CPDL-12
RADIO 2.2.19.261
May 27 2009, 19:06:41
before that was:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009, 18:19:15
because of my stupidity to performed SAPPIMG.nbh, i get my new SPL.
now.. my phone just stuck on "HTC Magic" logo.
cant go to recovery image. only can do fastboot.
and also.. cant do "adb devices".
any idea how?
riez_krist said:
im having a same problem too.
my current specs:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006(SAPP10000)
CPDL-12
RADIO 2.2.19.261
May 27 2009, 19:06:41
before that was:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009, 18:19:15
because of my stupidity to performed SAPPIMG.nbh, i get my new SPL.
now.. my phone just stuck on "HTC Magic" logo.
cant go to recovery image. only can do fastboot.
and also.. cant do "adb devices".
any idea how?
Click to expand...
Click to collapse
What SPL Did you flash? and you can't do adb devices in fastboot, only fastboot works in fastboot.
i did not flash that SPL. what i do was, copy the SAPPIMG.nbh file to my microSD, then go to fastboot mode (Vol down + Power) and HBOOT automatically installed the SAPPIMG.nbh file. the process was unsuccessful, but.. i still get the new SPL. thats make me really frustrating right now.
what should i do?
riez_krist said:
i did not flash that SPL. what i do was, copy the SAPPIMG.nbh file to my microSD, then go to fastboot mode (Vol down + Power) and HBOOT automatically installed the SAPPIMG.nbh file. the process was unsuccessful, but.. i still get the new SPL. thats make me really frustrating right now.
what should i do?
Click to expand...
Click to collapse
That doesn't answer what SPL you tried to flash, there's a number of Engineering and HardSPL and such, we know which one the OP tried to flash cuz he provided a link. But what one did you try to flash, once you can flash a good SPL then your custom recovery and rom should be able to boot fine.
okay.
so.. what can i do now to get it back?
If he now has 1.33.0006 and before he had 1.76.2007 isn't it obvious that he flashed 1.33.0006?
OP, flash another SAPPIMG.nbh/zip and you'll be fine. I suggest you pick one from http://forum.xda-developers.com/showthread.php?t=548218
i ve tried the first one:
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) - MD5 : F9674D19BE5F949D0D9DC99714D210E3
but.. Main version is older! update fail!
any ideas?
if the phone shows the boot splash and at least turns on, its not a "brick"