Related
http://www.amazon.com/iNcido-Samsung-Galaxy-Trans-Silicon/dp/B004A9XSR4
I never use my keyboard and I was wondering if this case would be better since it makes the phone sturdier by securing the keyboard and maybe make it a little thinner.
Has anyone tried this case or one like it?
thats extraordinarily stupid.
Kitteh298 said:
thats extraordinarily stupid.
Click to expand...
Click to collapse
The only thing stupid was your post. No call to be so rude in response to a simple question. If you dont use the keyboard I say go for it. I've never used one myself.
Sent from my SPH-D700 using Tapatalk
Looks cool....... I wish they had it in Black......
skyheli said:
Looks cool....... I wish they had it in Black......
Click to expand...
Click to collapse
They have one in black: http://www.amazon.com/iNcido-Brand-...ES/ref=sr_1_36?ie=UTF8&qid=1301021620&sr=8-36.
In fact, I think the cheapest option is to get 5 of them lol: http://www.amazon.com/iNcido-Samsun...C8/ref=sr_1_18?ie=UTF8&qid=1301021593&sr=8-18
I'm still on the fence on this, but even if they suck, it's still less than $10 down the drain.
Unfortunately, having just bought one of the black cases above, I can say that it is absolutely, positively, NOT "one-piece". It's a standard 2-piece slider-type case.
Sigh. (sadly tosses one more case onto the growing pile of unloved cases on my dresser)
Case history so far:
Seidio: meh.
Seidio ActiveX: nice hand feel, but a major 5-minute pain to disassemble the phone when the battery dies after 4 hours, and makes it impossible to use the camera button without shaking the phone.
Aluminum Milano: would rock, if it were made from plastic. When it's closed, the phone is rock-solid, and you'd never even know the keyboard is there. Unfortunately, it's aluminum, and has a family tree that clearly began back when Sprint phones still had real antennas. Putting the phone in it instantly nukes at least one bar, makes bluetooth flaky, and renders the GPS unusable under most circumstances. Worse, the metal picks up stray cat hairs and screws up the touchscreen. As the final deathblow, it covers the top part of the touchscreen, so pulling down the window doesn't work. Totally and completely unusable.
Silicone case from this thread: I can't definitively say I hate it, but I'm still bummed out that it actually IS a 2-piece case. That said, it's nicer than I thought silicone-type cases would be and is fairly easy to remove, so I'll probably keep it on for a few days unless it seriously annoys me in some as-yet unforeseen way. However, the sides are totally unsecured, and I have a hunch my back pocket isn't going to be kind to it.
It'll be just my luck that someone will finally come out with a plastic Milano, or a one-piece silicone case, two weeks after I've already bought my next phone in October.
I hear ya brother, why not try one of those skins that protect the phone. I wanna get one but not sure which one.
Sent from my SPH-D700 using XDA App
This case is HORRIBLE.
Its a cheaply cut silicone 2 piece case. With a CHEAP FLIMSY plastic "rail" sliding groove. When I tried to put it on my phone, the plastic rail part broke, and rendered the case useless.
It doesnt fit well, is MUCH to large for the Epic, and feels like cheap silicone.
I returned it to the seller for the $5. Had to pay return shipping too.
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
lafronz said:
Originally Posted by jbadboy2007
Guess no one else realizes this but when the 3g or wifi icon change to a color that is when google is accessing your phone.
Click to expand...
Click to collapse
^--------ROFL!!!!
lafronz said:
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
Click to expand...
Click to collapse
Yeh, but will it make it so you can't feel the flimsy ass screen?
Like the OP, that's all I'm looking for too... I want my phone to feel like it's a nice candy-bar phone, I don't want it to shake and rattle like my screen is about to fall off.
Ordered an Orange one, am looking forward, will review it and lt you know
Sent from my SPH-D700 using XDA App
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Marlinsfan88 said:
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
Click to expand...
Click to collapse
ditto , otterbox commuter. FTW
ive had otterbox's on all my androids( and BBs), moto droid 1 & 2 & global, evo 4g, and my epic with zagg invisia sheild. best protection IMO.
wish they had the pink accents for my girls phone, she cant find a case she likes that doesnt feel cheap, or all the design flakes off.
also , thanks for tip about the side snaps, filed mine down with diamond file, (im a locksmith)
PokeAsheep said:
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Click to expand...
Click to collapse
so its a one piece silicon case? like the blackberry ones?
http://www.seidioonline.com/category-s/6212.htm
!! I can't wait to get one of the Active ones!
Holes arent there. They make such great cases also. Its a shame
Sent from my HTC Sensation 4G
Must be a reason why they are not there...just drill your own!
Yea, I had a Seidio on my BB, and they were the first cases I were looking at. But now that the pictures are actually out, I'm probably gonna go with TPUcases instead.
Xx12thANG3LxX said:
Holes arent there. They make such great cases also. Its a shame
Sent from my HTC Sensation 4G
Click to expand...
Click to collapse
I've been noticing that most of the cases that are available only have the hole above the camera, even the ones sold by T-Mobile. So, it got me wondering, do the other holes serve any purpose? I took the back cover off and can immediately tell that the hole above the camera serves a purpose since it has a grommeted pass through in the inside housing. So, its good that every case I've seen has that hole cut out. The other four holes have no pass through and appear to only be there as rivet/mount points for the antenna contacts. So, after seeing that, I'm less concerned that even reputable manufacturers like otterbox are not including the other four holes that seemingly serve no active function.
Sent from my HTC Sensation 4G using XDA Premium App
I had the active case on my nexus and didn't like it. The rubber piece collects too much lint and dirt and would get stuck in my pocket when I try to pull it out. I think the surface case would be much better, but that is just me.
I dont see what holes are needed for? EM radation passes THROUGH materials just fine. (You can make calls inside your bathroom, right?). As long as its not a metal case, or some other materials that conducts current, you should be fine.
Sound on the other hand....
Matt
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
http://lifehacker.com/5716776/diy-rubberized-phone-backing
http://forum.xda-developers.com/showthread.php?t=881062
--------------
Check the above links. Anyone ever seen this before? I think it looks awesome. I wanna try it out.
I know the Sensation has antennas in the little holes in the casing but, I saw on a Titan forum that they sanded it down and the issue with the antenna being affected, then fixed.
http://forum.xda-developers.com/showthread.php?t=1751208
But this mod doesn't require sanding, though the Sensation has the antennas built in, it may be difficult or impossible.
So maybe theres a way we can avoid the antenna and do this Soft Grip housing mod.
-------------
Someone want to do it? Should be fun, kind of like the Chrome mod.
I've seen Plasti Dip before, but I haven't used it. I'm sure it can be useful for some applications, but I have to wonder why someone would hassle with using it on a phone rather than buying a $2 TPU case.
MechanicaIMan said:
I've seen Plasti Dip before, but I haven't used it. I'm sure it can be useful for some applications, but I have to wonder why someone would hassle with using it on a phone rather than buying a $2 TPU case.
Click to expand...
Click to collapse
I keep my phone bare and don't drop it so using this would be a comfortable almost bare phone. I have sweaty palms so it would pretty much relieve it.
Found this case on Aliexpress.com that promises no signal loss because slots are cut out where each antennae strips are on the phone. Looks amazing. Also says it has a liner on the inside to cushion the phone if dropped.
S6 Edge
http://www.aliexpress.com/item/For-...e-Case-For-Samsung-Galaxy-S6/32328021917.html
S6
http://www.aliexpress.com/item/S6-2...inum-Bumper-Case-For-Samsung/32328655797.html
I am ordering one but does anyone ordered have any reviews of this case?
Unfortunately that isn't how it works. Those plastic slots aren't really there for the antenna to radiate through. Either they are merely aesthetic, or they are there to break up the metal sides so that they are the right length to actually be part of the antenna themselves. So this case really is going to do nothing to stop any signal degradation.
Oh No, it's our friend Lucky Garden again pushing more China junk.
I do plan to order something like this one, as I was searching for it yesterday. Please give us review, when you get it.
Aww crap, I was hoping it would be a great case. Well I bought one but the good thing is it was only $2.99. When it gets here I will let you know what I think.
It came!!
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!
BlessedTalent said:
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!
Click to expand...
Click to collapse
I ordered one I think a day or two after you did. So it should be here soon. what about the GPS? Is the signal on that affected much?
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Oh, and as far as the slipperiness goes. I did this with my clear case and it worked pretty well. Most of the time that slipperiness is a combination of the slick plastic and the release agent they used. I started with 2000 grit sandpaper. Then I wet sanded it with 2000 grit. Then I 5000 grits sanded it. Then I used mothers plastic polish. Same thing you use on headlights. And it's much more comfortable to hold without getting that greasy slippery feeling and remaining crystal clear
Nice, I'll do that to help with the feel. My GPS seems to be unaffected as well. Seems like a win on this one to me.
One thing I will say is that the back cover is a pain to get off, doesn't slide off as easy as it goes on. Not a deal breaker but if you like to change your cases often this might be a problem for you.
looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't
[email protected] said:
looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't
Click to expand...
Click to collapse
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.
BlessedTalent said:
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.
Click to expand...
Click to collapse
please post if you find it for us.
[email protected] said:
please post if you find it for us.
Click to expand...
Click to collapse
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.
BlessedTalent said:
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.
Click to expand...
Click to collapse
If you want me to guineepig I will lol. I have no experience with this website is it better/more reliaable than ebay?
That's cool, yeah I don't want to put out $20 to find out it doesn't work as well as planned. I have purchased 5 cases over the past 6 years and have never had a problem. The money goes in escrow until you confirm you got your order in satisfactory condition and time. If not the money goes back to you. I pay with my credit card but others use Paypal. I hate Paypal so I don't use them. I thinks it's safe and will continue to order from Aliexpress. Others on this forum have also ordered, they may have some reviews on their experiences.
Ill buy it tonight. I am debating on black on black or back and silver
I just installed a after s reel protector on he back of my phone and the removal of the back of the case is super easy to remove now. I guess that moisture between the glass and the plastic was creating a suction keeping the back of the case stuck to the phone. Not a problem now though.
Really liking how this case feels and looks, most people don't even notice that a case is in my phone which is the whole point of me buying it.
I got this case via eBay and I am very pleased with it. Just what I wanted. I'll make a thread and take pictures later.