I'm running the newest Cyanogenmod 6.1, coming from a Fresh ROM. I've had the same Recovery image since I rooted the phone, RA-heroc-v1.2.3.
I'm trying to use the ROM Manager included with my new ROM. In order to do so, I need to have clockwork as my recovery image. I've flashed both the Clockwork recovery image 2.5.0.1, as well as an updated version of RA's (v1.6.2) using ROM Manager. In each case, the process appears to complete successfully.
However, when I boot back into recovery using Home+End, I continue to get my original RA recovery 1.2.3 menu.
is there something I'm doing wrong that's preventing me from updating my recovery image?
Any help would be greatly appreciated.
drewski3420 said:
I'm running the newest Cyanogenmod 6.1, coming from a Fresh ROM. I've had the same Recovery image since I rooted the phone, RA-heroc-v1.2.3.
I'm trying to use the ROM Manager included with my new ROM. In order to do so, I need to have clockwork as my recovery image. I've flashed both the Clockwork recovery image 2.5.0.1, as well as an updated version of RA's (v1.6.2) using ROM Manager. In each case, the process appears to complete successfully.
However, when I boot back into recovery using Home+End, I continue to get my original RA recovery 1.2.3 menu.
is there something I'm doing wrong that's preventing me from updating my recovery image?
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I had the same issue the other day. I think its a rom manager problem. If you can find the clockwork recovery img file for the hero, you can try manually flashing using terminal emulator on your phone or through adb.
Sent from my HERO200 using XDA App
Related
I am lost.
I had FireFly 2.05 on my SGS (ATT US version) and was going to update to 2.1. I followed the procedure as I aways do; ODIN 1 click to stock rom, master clear, copy update.zip and rom file and reboot into recovery. This time however I get the following error
E:Can't symlink /system/xbin/su SYSTEM:bin/su
E:Failure at line 14
I checked some notes on this and found out that it might be a currupt file. So I re-downloaded FireFly2.1 again and transfered the file to the internal SD card. The outcome was the same.
Then I copied the original 2.05 version back which I know was fine and I still get the same error. Even after a full stock 1-click and master clear the above error will not go away.
Is my internal SD card messed up? Or am I missing something else?
It's running stock right now and all seems to work fine, but I cannot stand all the bloatware and other crap ATT puts on the phone and really want to try FireFly2.1.
Any help is greatly appreciated.
Thanks.
Did you flash clockwork recovery
Did you root the phone after you flashed back to stock?
Sent from my SAMSUNG-SGH-I897 using XDA App
Agree with DaveyBB - sounds like you are not rooted.
Sent from my SAMSUNG-SGH-I897 using XDA App
You do not need to root on stock just flash clockwork with update zip
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
anosis said:
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
To install clockwork select reinstall packages twice
The issue is not with cw recovery. I am already in it, but the error that i get is after i click "yes apply this zip"... The script starts to format the system, data, datadata, etc. And then this error shows up after files ate copied
Sent from my SAMSUNG-SGH-I897 using XDA App
Have you tried re download of rom package?
My only guess is that clockwork and the rom are not working well. I would try downloading a different clockwork
Sent from my SAMSUNG-SGH-I897 using XDA App
mcord11758 said:
Have you tried re download of rom package?
Click to expand...
Click to collapse
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Maybe try to reformat sd through clockwork
Problem solved, kind of.
My desktop PC, which I always use to transfer the files is somehow responsible for the error I get in CWM recovery. I ended up using my laptop to transfer the ROM to the phone and it worked again.
Something is messing up the USB transfer? That seems very odd but I am glad it's not the phone that caused the issue.
If I find out what the issue is with my Desktop I will post again just in case this rather rare issue might happen to someone else.
anosis said:
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Click to expand...
Click to collapse
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
bames said:
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
Click to expand...
Click to collapse
I don't think he's getting into Clockwork via ROM Manager, as he's said multiple times he's using the CWM update.zip; reinstalling packages in 2e recovery to get to CWM.
He's also said he doesn't believe this to be an issue with Clockwork (and I don't either). And I'm also pretty sure we're not dealing with newbie mistakes of Android Recovery vs. Clockwork Recovery.
any chance you're leaving your usb plugged into your cappy while you're trying to flash it?
Everytime I try and restore a backup from cwm the phone reboots to the first mytouch boot screen and just stays there. Is there something I'm missing on how to restore a backup? I'm using cwm 3.0.0.5, I make a backup, then when I want to restore it, I wipe data and cache and hit restore backup. Once it's finished, I reboot the phone, then it just sits on the boot screen until I eventually decide to pull the battery.
j21blackjack said:
Everytime I try and restore a backup from cwm the phone reboots to the first mytouch boot screen and just stays there. Is there something I'm missing on how to restore a backup? I'm using cwm 3.0.0.5, I make a backup, then when I want to restore it, I wipe data and cache and hit restore backup. Once it's finished, I reboot the phone, then it just sits on the boot screen until I eventually decide to pull the battery.
Click to expand...
Click to collapse
Clockwork Recovery 3.0.0.5 will work only with 2.3 (gingerbread ROMs).
Since the stock ROM is 2.2.1 you need to use recovery image 2.x.
you are in luck though. re-Flash CM7 download Clockwork ROM Manager scroll to the bottom "All clockwork recoveries" and flash the highest 2.x version they have. Then you can restore your back up without problems.
Thanks, I actually found that exact answer about 10 minutes after I posted this. I did just that, flashed cm7 then flashed cwm 2.x. I wanted to try cm7 anyway, but after an hour just trying to get the market to work, I decided to just go back to good old iced glacier.
Sent from my HTC Glacier using XDA App
j21blackjack said:
Thanks, I actually found that exact answer about 10 minutes after I posted this. I did just that, flashed cm7 then flashed cwm 2.x. I wanted to try cm7 anyway, but after an hour just trying to get the market to work, I decided to just go back to good old iced glacier.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I bet you didn't flash gapps or the newer version of it. That's why you couldn't get the market to work.
Sent from my CM7 HTC Glacier using XDA App
coupetastic-droid said:
I bet you didn't flash gapps or the newer version of it. That's why you couldn't get the market to work.
Sent from my CM7 HTC Glacier using XDA App
Click to expand...
Click to collapse
I have no idea what I did, but eventually I got it all worked out. I'm now a very happy cm7 rc1 user with a 1.84GHz smartass kernel.
j21blackjack said:
I have no idea what I did, but eventually I got it all worked out. I'm now a very happy cm7 rc1 user with a 1.84GHz smartass kernel.
Click to expand...
Click to collapse
Glad it worked out for you, but you (and others who may have this problem) could save yourselves a lot of this by downloading TrueBlue's zip (from development sub-forum) and flash it. It has cwm 3.0.0.6 plus stock TMO recovery.
With CM 3.0.0.6 recovery (thanks to Option94 for that), you can backup/restore both Android 2.2.x (CM6) and 2.3.x (CM7). TrueBlue's thread OP gives you instructions on how to use it.
It is a modified ROM Manager that "disguises" cwm's 3.0.0.6 and the stock Recovery as cwm 3.0.0.5 and 2.5.1.4 respectively.
PS - if you use it - don't forget to "thank" him (and Option94 also).
UPdate - if you subsequently update ROM Manager, it does not wipe out the above scheme with the disguised cwm's - it still works the same (at least through ROM Manager 3.0.1.0).
gaww said:
Glad it worked out for you, but you (and others who may have this problem) could save yourselves a lot of this by downloading TrueBlue's zip (from development sub-forum) and flash it. It has cwm 3.0.0.6 plus stock TMO recovery.
With CM 3.0.0.6 recovery (thanks to Option94 for that), you can backup/restore both Android 2.2.x (CM6) and 2.3.x (CM7). TrueBlue's thread OP gives you instructions on how to use it.
It is a modified ROM Manager that "disguises" cwm's 3.0.0.6 and the stock Recovery as cwm 3.0.0.5 and 2.5.1.4 respectively.
PS - if you use it - don't forget to "thank" him (and Option94 also).
Click to expand...
Click to collapse
Did that yesterday, it works great.
Thats awesome news, I was just about to post the question about the 3.0.0.6 backwards compatibility with nandroid backups.. Thanks!
i have the same issue.i flashed CM7.its installed,now i go into ROM manager and scroll down and select "All ClockworkMod Recoveries" (2.5.1.4) but get "an error accured while flashing your recovery"?
what did i do wrong?am i missing some thing?
i also wanted to know how i install GAPPS while i have CM7 installed? thanks for any help
MTSDAN said:
i have the same issue.i flashed CM7.its installed,now i go into ROM manager and scroll down and select "All ClockworkMod Recoveries" (2.5.1.4) but get "an error accured while flashing your recovery"?
what did i do wrong?am i missing some thing?
i also wanted to know how i install GAPPS while i have CM7 installed? thanks for any help
Click to expand...
Click to collapse
ok i installed GAPPS ..but still having issues with the Clock work recovery
MTSDAN said:
i have the same issue.i flashed CM7.its installed,now i go into ROM manager and scroll down and select "All ClockworkMod Recoveries" (2.5.1.4) but get "an error accured while flashing your recovery"?
what did i do wrong?am i missing some thing?
i also wanted to know how i install GAPPS while i have CM7 installed? thanks for any help
Click to expand...
Click to collapse
Ignore all those BS. Go in Market and download Rom Manager 3.0.1.0 and then flash the latest 3.0.0.5 (orange) recovery image. Then place the GAPP anywhere in your SDCard long as you know where it is. Reboot it in to recovery but selecting it from Rom Manager and then when its booted select Install zip from SDCard> Choose zip from SDCard.
Flash the GApp.zip and be done. Just remember when you flash NB via full wipe you have to flash GApp.zip everytime but if you just mount new NB on top of old one then DO NOT flash GApp.zip again as it will still be on your device as it ment to be installed once in that case.
BlackSHELF said:
Ignore all those BS. Go in Market and download Rom Manager 3.0.1.0 and then flash the latest 3.0.0.5 (orange) recovery image. Then place the GAPP anywhere in your SDCard long as you know where it is. Reboot it in to recovery but selecting it from Rom Manager and then when its booted select Install zip from SDCard> Choose zip from SDCard.
Flash the GApp.zip and be done. Just remember when you flash NB via full wipe you have to flash GApp.zip everytime but if you just mount new NB on top of old one then DO NOT flash GApp.zip again as it will still be on your device as it ment to be installed once in that case.
Click to expand...
Click to collapse
thanks got gapps installed just fine but im having trouble with the rom manager im trying to install the laterClockwork recoveries (2.x)..but i keep getting an error
MTSDAN said:
thanks got gapps installed just fine but im having trouble with the rom manager im trying to install the laterClockwork recoveries (2.x)..but i keep getting an error
Click to expand...
Click to collapse
No you didn't do what I said then. Go to Market> Rom Manager (3.0.1.0)> Download/Install. Then run Rom Manager and flash 3.0.0.5(latest not 2.5.1.2/2.5.1.4). If you use 3.0.0.5 you don't have to worry about 3.x(orange) or 2.x(green) as you can run 2.2/2.3 based without changing it.
3.0.0.5 < not Rom Manager its Recovery.
3.0.1.0 < ver of Rom Manager with 3.0.0.5 Recovery frame.
Problem is for people who don't know it get confusing as 3.0.0.5 could mean Recovery and Rom Manager. As normally other software specify and have different type of scheme for framework and software but in this case they both share same number so it gets little confusing.
ok i installed 3.0.1.0 rom manager from market so now i should have no issues when restoring 2.2.1 roms or 2.3 roms?thanks for the help man im coming from a Vibrant that was lost/stolen..that vibrant was so easy to root lol.thanks again
MTSDAN said:
ok i installed 3.0.1.0 rom manager from market so now i should have no issues when restoring 2.2.1 roms or 2.3 roms?thanks for the help man im coming from a Vibrant that was lost/stolen..that vibrant was so easy to root lol.thanks again
Click to expand...
Click to collapse
Well if you flashed 3.0.0.5 Recovery then no you won't have to worry about Green(2.x EXT3) or Orange(3.x EXT4) as you can flash both.
I kept getting flash issues after using the unlockr's root method on my Nexus S 4G, specifically the inability to flash roms due to a status 7 error.
BEFORE you run around searching every forum, or use someone else's old nandroid to revert to 2.3.1, or do any craziness... if you flashed Clockwork via fastboot, install ROM Manager from the market, and install the latest ClockworkMod recovery via Rom Manager, and give it another try.
Hopefully this is easy enough to find, that no one else has this problem.
Happy hunting
Hi,
This didn't help
I installed ROM Manage from Play Store and tried to install ClockworkMod recovery from ROM Manager. Howeve, it kept on getting stuck while installing ClockworkMod recovery....
Are there any other solutions for Status 7 error?
Flash the latest CWM manually via fastboot. Have a look at the Nexus S rooting guides, they all detail how to flash a custom recovery.
Yep, it was all about updating the CWM. In my case I had to update it to the one that supports touch mode (don't remember the version number). Once that was done all went quite smoothly.
Sent from my Galaxy Nexus using XDA
I have a rooted Sidekick 4G and have downloaded the Smooth Maximus ROM onto it, as well as ROM Manager. When I looked at the how-to replace the stock recovery binary for CWM it doesn't allow me to overwrite the recovery, so I can't get CWM to boot. Any suggestions? I seem to be out of options. Thanks to anyone who can help!
ROM manager should have the option to flash CWM, need to do it twice then request that it boot you into recovery
So I'm trying to update my rooted 3.0.1 euro 3G xoom to the 3.2 Hammerhead ROM, and here's something that is really confusing me:
I've installed ROM Manager 4.3.3.0 from the Market. Then I downloaded and flashed ClockworkMod Recovery 3.2.0.0 R4c via this thread: http://forum.xda-developers.com/showthread.php?t=1074979
So far so good: I can boot to recovery and it looks that everything is working nicely... with the exception of the following:
1) Even though I have CWM installed, ROM Manager won't recognize it. It keeps asking to install it. I haven't done that though because I don't want to overwrite the one I flashed... how can I get ROM Manager to recognize CWM? Or, if I install a different CWM version through the ROM Manager interface, will that overwrite the existing install, or even break something?
2) I can't find Nandroid in the recovery menu of 3.2.0.0 R4c. It says that it should be there in the Wiki (http://forum.xda-developers.com/wiki/index.php?title=How_to_backup_or_recover_via_Nandroid), but no sir. I only have the options Backup and Advanced Backup in recovery; it doesn't say Nandroid anywhere.
The thing is - I made a normal backup and it created a folder with .img files in it, along with a nandroid.md5 file. So is this a full Nandroid backup or not? And should it not be a zip file? Meaning - will I be able to revert to this backup through ROM Manager or CWM later if it's not a zip?
3) Lastly, I want to install the Tiamat 2.1 Hammerhead ROM. solarnz writes in the instructions in step 6 to "install the rom". So do I do that from recovery? Or from ROM Manager? Which brings me back to my first problem, that ROM Manager won't recognize CWM and won't let me install a ROM without it.
Also - can I install the Hammerhead ROM from my rooted 3.0.1 device at all, or should I install 3.1 first?
I know these are a lot of questions all at once, but after hours and hours of searching and reading (and learning a lot!), I still can't figure this part out.
Many thanks to anyone who can help me make sense of this!
bobblack said:
So I'm trying to update my rooted 3.0.1 euro 3G xoom to the 3.2 Hammerhead ROM, and here's something that is really confusing me:
I've installed ROM Manager 4.3.3.0 from the Market. Then I downloaded and flashed ClockworkMod Recovery 3.2.0.0 R4c via this thread: http://forum.xda-developers.com/showthread.php?t=1074979
So far so good: I can boot to recovery and it looks that everything is working nicely... with the exception of the following:
1) Even though I have CWM installed, ROM Manager won't recognize it. It keeps asking to install it. I haven't done that though because I don't want to overwrite the one I flashed... how can I get ROM Manager to recognize CWM? Or, if I install a different CWM version through the ROM Manager interface, will that overwrite the existing install, or even break something?
2) I can't find Nandroid in the recovery menu of 3.2.0.0 R4c. It says that it should be there in the Wiki (http://forum.xda-developers.com/wiki/index.php?title=How_to_backup_or_recover_via_Nandroid), but no sir. I only have the options Backup and Advanced Backup in recovery; it doesn't say Nandroid anywhere.
The thing is - I made a normal backup and it created a folder with .img files in it, along with a nandroid.md5 file. So is this a full Nandroid backup or not? And should it not be a zip file? Meaning - will I be able to revert to this backup through ROM Manager or CWM later if it's not a zip?
3) Lastly, I want to install the Tiamat 2.1 Hammerhead ROM. solarnz writes in the instructions in step 6 to "install the rom". So do I do that from recovery? Or from ROM Manager? Which brings me back to my first problem, that ROM Manager won't recognize CWM and won't let me install a ROM without it.
Also - can I install the Hammerhead ROM from my rooted 3.0.1 device at all, or should I install 3.1 first?
I know these are a lot of questions all at once, but after hours and hours of searching and reading (and learning a lot!), I still can't figure this part out.
Many thanks to anyone who can help me make sense of this!
Click to expand...
Click to collapse
Forget about Rom Manager. You have the correct recovery installed and you have made a "nandroid" backup when you used the backup option in CWM recovery 3.2.0.0 R4c. The Rom you want to flash needs to be on your MicroSD card and that needs to be in your Xoom when you boot into recovery. It is from the CWM recovery menu that you will choose to flash the zip file that will install the Rom. You will need to be able to boot into recovery and you can do it by pressing volume up and power to get to dual core screen, then after 3 seconds, press volume down then volume up and you should be in recovery. Or you could download Quick Boot from the market and use its boot into recovery option (that's what I do).
About the version you need to be on to flash Hammerhead...what does it say? I think you may need to be on 3.1 but just read the OP on the Hammerhead thread...it will tell you the requirements.
Good luck!
Thanks a lot for explaining that okantomi, that's very helpful and reassuring!
The only thing I'm left with now is to figure out the version part... the rom OP doesn't say anything about a required version. Here's the thread btw: http://forum.xda-developers.com/showthread.php?t=1203635
I made my way through the first 18 or so pages of the 434 total pages in that thread, but still couldn't find any info on that. I'll keep looking - not giving up
Quick update... I decided to just go for it. I flashed the 3.2 ROM onto 3.0.1 - it worked perfectly without any hiccups whatsoever. I'm now running Androud 3.2 with 3G and it works beautifully. Can you see that I'm smiling?
bobblack said:
Quick update... I decided to just go for it. I flashed the 3.2 ROM onto 3.0.1 - it worked perfectly without any hiccups whatsoever. I'm now running Androud 3.2 with 3G and it works beautifully. Can you see that I'm smiling?
Click to expand...
Click to collapse
Me too! ;^ )
Enjoy your shiny new Rom!