I have no idea what i was thinking or what i was doing. first my phone was stuck on Phone small yellow triangle and PC icon.
then it got stuck
now finally i was able to hook up with odn3 but it stuck on file analysis, what should i do, i tried and research everything but no luck.
thanks
wohooo able to back to origninal. for some reason I had to turned on the kies.
help yellow triange
Hi, I just tried to update firmware and like you I'm stuck with yellow triangle between phone and PC...what did you do? What's odn3?
Please help...
Related
I just tried to root my HTC Aria and something has gone terribly wrong. After intalling the boot driver things I tried to turn my phone on and it's frozen with an error screen with an image of a phone and a red exclamation mark in a triangle.
It wont turn off or do anything. HELP ME
I have a galaxy s2 I9100 the last day i wanted to download the cyonegen mode to try it i followed all the step in the tutorial correctly but now in my boot screen a triangle appear and after some researched i figure out that this triangle is caused by my counter that is not set to 0 anyway i also find the triangle away software that can reset it so i went to the tutorial of how to use it and i followed it... it reset the counter but my phone is stuck in the boot screen and an infinite loop is occurring .. i searched for many discussion over here and in the web and i found this : After using Triangle Away I get no bootscreen at all or an error message on screen ?
Try flashing the attached "param.tar" as PDA in ODIN (no repartition!), that may clear up the issue. Samsung Galaxy S II GT-I9100 ONLY
my question is where can i find this "param.tar" file so i can flash it with odin and thank you
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
cibrotron said:
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
Click to expand...
Click to collapse
Hmm ... after flashing a custom (PhilZ-cwm) recovery, the yellow triangle shows that you are no longer on official/stock firmware.
You can reset it with TriangleAway app from Chainfire.
If download mode still works, you can try to flash another (custom) kernel with a custom recovery. But it has to be a kernel which is compatible with your current ROM.
For further questions, please post in the Galaxy SII GT-I9100 G Q&A thread.
If you have issues with your download mode, check the [GUIDE] Fix an unflashable or soft bricked I9100G thread.
Thread closed ... thank you !
So I messed up. I tried to root Samsung Galaxy J1 using Odin but as soon as flashing started the phone rebooted and despite Odin saying PASS it does not want to turn on. It only displays logo and a small red exclamation mark in the upper left corner and stays like that forever.
Now the question: is it possible to redo it? I mean i had some fairly important files (a couple of photos and 2-3 audio tracks) on there and unfortunately i haven't made any backup. I can access download mode and recovery but that doesn't help much since i want to rescue those files somehow... Do you have any idea what should I do? Thanks in advance.
I read somewhere that if I flash the same firmware through odin I shouldn't have my data lost, Is this true and is this possible in my situation (i mean will flashing firmware fix my red exclamation mark problem?)
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
shahood24 said:
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
Click to expand...
Click to collapse
Use Samsung SmartSwitch to reinstall the Software
Sometimes you need to wipe the data partition in recovery mode. As you already tried flashing firmware.
Or download your firmware from another page. Or just redownload what you got. Also make sure 100% its the most recent firmware for your device. Then report back what you find
U99Dev said:
Use Samsung SmartSwitch to reinstall the Software
Click to expand...
Click to collapse
Hey so I tried that route as well but it said that smart switch doesn't support my device.