Related
Ok, so long story short, I must have deleted some files from the phone, even though I thought I was only deleting files from the SD card because I lost all my gapps. So after a few failed attempts at getting things back to normal, I finally backed up my photos then formated the sd card, flashed the DRC83_base_defanged zip and then the latest Cyanogen rom and now I can sign onto Google and market and calender seem to be working but there are a couple of issues,
1) I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process.
2) Everything seems to be working close to normal except Beautiful Home. It shows the time but does not connect to show the area I am in or the weather. I have put in a zip to use when it cannot connect and it still will not display information. I am pretty sure this is not a problem with BH because I did not have this problem before all this went down.
I am guessing I am still missing something from my phone since the last process I went through ( format SD card, factory wipe, flash base DRC83, flash CM) still produced an error message with the setup wizard. Anyone have any ideas?
Try posting this question in the forum for your device, someone might be better able to help you there.
why is my phone saying this?
prob
Me too can't seem to find answers. soon as i boot up after a new flash I get the force close error and other google force closers. wt? I've done everything, format, hard reset and Ive noticed if some how I get to install from the app market i click on the app and get fc.. Also I can't delete my internal sd card hard format still does not erase the card. I'm running out of ideas. please if someone know of away please let me know. Thanks
reboot in recovery mod
select restore
that should solve the problem
yes me too under erickwill project rom... X10x EWJet xKernel(FreeKernel and zKernel)GB V2.3ex NEW PATCH V3.1F(24AUG11)
reboot coby kyros
frz said:
reboot in recovery mod
select restore
that should solve the problem
Click to expand...
Click to collapse
I try to install the android market on my Coby Kyros 7022 and get this message
"The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close.
But when i push on that button i always get the same message. I did a reset on the back of the device but it always restart with the same message.
Is there a solution to hardreset or via my PC to restart my device.
Please help.
frz said:
reboot in recovery mod
select restore
that should solve the problem
Click to expand...
Click to collapse
This is not helping. I tried but it didn't work. Still have the problem.
Alredy solved by enter recovery and wipe ALL.
go to recovery mode then wipe 1000% ok
Br
MozzumalGsM
Solução erro setupwizard
Meu brother eu tive o mesmo problema, segue ai o esquema
faça a restauração total de fabrica do android agora atenção;
Antes de fazer isso tire o chip do aparelho e inicializa o android vai aparece a apresentação normal do android note que ele vai pedir pra cria uma conta no google mais só vai ter a opção de wi-fi ai que esta o esquema clica na opção wi-fi faça o login até chega na tela preta sem menu ai meu querido é só manda pro seu e-mail google um aplicativo de launcher tipo zeamlauncher.apk pois o que aconteceu foi que esse aplicativo foi desinstalado apos enviar para o seu e-mail o celular aparecera a notificação acesse o email recebido e clique em instalar e pronto meu chapa é só corre para o abraço!!!!!!!!!!!
The application Setup Wizard (process com.android.setupwizard) has stopped
i was facing same problem here is the solution !!!
1)your mobile should be rooted if not see youtube how to root your mobile !
2)factory reset your mobile
3) wipe all cache
4) then google for "DOWNLOAD STABLE MOD FOR "xxxxxx" <- [your device name]
5)download the mod from xda
6)save it on to your memory card insert it and reboot your phone in recovery mode and the install the zip mod!!!!!!!!!!!!!!
I think u have not installed the rom properly...first backup all the personal things and reboot to recovery wipe cache and dalvik cache and flash the rom and don't install gapps...after flashing the rom package reboot and try some thing for few mins and again goto recovery and wipe dalvik and cache and install gapps and reboot... try it..I hope this help:thumbup:
Sent from my HM NOTE 1LTE using XDA Free mobile app
Whats in Setup Wizard?
The newer builds above 2016-01-01 cant be rooted with KingoRoot or KingRoot any more but if you want to downgrade and be rooted you can use this good luck
>>LG K4 K120E<< is rooted with SuperSU!
Android Version: 5.1.1
Patch Level: 2016-01-01
Kernel Version: 3.10.65
Buildnumber: LMY47V
Baseband Number: MOLY.LR9.W1530.MD.LWTG.TC01.SP.E1LTE.V1.P2
Software Version: V10I-EUR-XX
Download Link:
https://mega.nz/#F!rshTgL7a!MPQ_qnVjfHnMgSuwHbtE9g
You can flash it with Smart Phone flash Tool.
The scatter file for LG K4 K120E is below.
WARNING!!!!! FLASH AT YOUR OWN RISK!
Download Smart Phone Flash Tool Windows:
https://androidmtk.com/smart-phone-flash-tool
It works for me so it will work for you guys to!
First, thanks for this.
I own a K130E, which has the same hardware specs but sold outside EU, is it safe to try this?
I'm worried that the mobile op. won't recognize it anymore (it's my first time flashing a rom so I don't know if that makes sense or not).
thomasgf22 said:
First, thanks for this.
I own a K130E, which has the same hardware specs but sold outside EU, is it safe to try this?
I'm worried that the mobile op. won't recognize it anymore (it's my first time flashing a rom so I don't know if that makes sense or not).
Click to expand...
Click to collapse
i wish i could tell you but i cant tell you if its working or not because i dont have a K130E and cant test it out sorry man i have to leave to you
Please, give us instructions how to install the ROM
Thanks
So, I'm yet another one who's asking for help. Not because I can't flash a ROM, but because I have never used this program before and I really don't have the time to explore and explain to myself what this and that setting does. So, by replying to this thread, you would do yourself a favor (not getting any more notifications from people in this thread trying to figure out how it works) and me and much more guys like me (by telling us how it's done, since there are no other places on the Internet regarding the root of this phone).
EDIT: I figured it out, after 2 hours.
So, here we go:
Before you start this, make sure you have the LG drivers installed! If not, connect the phone to your PC and in the notification center, select the notifiaction that says "Device connected as ___". It will open up another window. Press on the three dots in the up right side of the screen and select "Install drivers", if the phone doesn't ask for this as soon as the window is opened. The driver installer should pop in your computer. I guess you know what to do with what popped up.
1st: Create a Mega account, if you don't already have one, you'll understand later why. Download and extract the ROM that the OP is giving link to. If you're using Firefox, get Chrome and download it from there as the file is hosted on Mega, which won't store almost anything if on Firefox. So, open the ROM link in Chrome and log into your Mega account. Now, open the link again, right click on that folder and select "Download as .zip" file. Chrome should ask for permission to let Mega store things on your PC, allow it.
2nd: After the download is ready, extract it somewhere you won't forget it's there.
3rd: Download Smart Phone Flash tool. Select last version compatible with Windows PC and, after it's downloaded, extract it. Right click on flash_tool.exe, go to compatibility tab and select "Run program as Administrator".
4th: Download Scatter file - right click on the attached file to this thread and select "Save as…" and click OK. The file should be saved in your Downloads folder.
5th: Open flash_tool.exe and go to download tab. Select "Scatter-Loading" and point to the file downloaded at step 4. VERY IMPORTANT!! DON'T MODIFY ANYTHING!! LET EVERYTHING AS THE PROGRAM SEES AND CONFIGURES IT!!
6th: You will see that only "system" is checked, but it isn't pointed to any file. Under the directory tab, you'll have to click on the empty space and point to where you extracted the ROM, at the file system.img.
7th: If your phone is on, turn it off and remove its battery.
8th: In flash_tool, press download. Now, connect your device to the computer and do a short "Volume Up" button press. The program will detect the phone and it will start the flashing process, which will take ~5 minutes.
9th: After the flash is done, you can close the program and disconnect your phone. Plug the battery back in and power the phone back up. After it boots up, you may get com.android.phone errors or something similar. You will have to get to Settings-Backup&Reset and reset the phone. After it's been reset, you will be able to enjoy your rooted LG K4. Good luck!
Thank you, OP for this thing. Also, some extra information, this is ranked as "Hard" to root phone by Root Checker and it is ~4600th hardest to root out of 5600 phone model numbers registered in Root Checker. Didn't expect that.
antoniu200 said:
So, I'm yet another one who's asking for help. Not because I can't flash a ROM, but because I have never used this program before and I really don't have the time to explore and explain to myself what this and that setting does. So, by replying to this thread, you would do yourself a favor (not getting any more notifications from people in this thread trying to figure out how it works) and me and much more guys like me (by telling us how it's done, since there are no other places on the Internet regarding the root of this phone).
EDIT: I figured it out, after 2 hours.
So, here we go:
Before you start this, make sure you have the LG drivers installed! If not, connect the phone to your PC and in the notification center, select the notifiaction that says "Device connected as ___". It will open up another window. Press on the three dots in the up right side of the screen and select "Install drivers", if the phone doesn't ask for this as soon as the window is opened. The driver installer should pop in your computer. I guess you know what to do with what popped up.
1st: Create a Mega account, if you don't already have one, you'll understand later why. Download and extract the ROM that the OP is giving link to. If you're using Firefox, get Chrome and download it from there as the file is hosted on Mega, which won't store almost anything if on Firefox. So, open the ROM link in Chrome and log into your Mega account. Now, open the link again, right click on that folder and select "Download as .zip" file. Chrome should ask for permission to let Mega store things on your PC, allow it.
2nd: After the download is ready, extract it somewhere you won't forget it's there.
3rd: Download Smart Phone Flash tool. Select last version compatible with Windows PC and, after it's downloaded, extract it. Right click on flash_tool.exe, go to compatibility tab and select "Run program as Administrator".
4th: Download Scatter file - right click on the attached file to this thread and select "Save as…" and click OK. The file should be saved in your Downloads folder.
5th: Open flash_tool.exe and go to download tab. Select "Scatter-Loading" and point to the file downloaded at step 4. VERY IMPORTANT!! DON'T MODIFY ANYTHING!! LET EVERYTHING AS THE PROGRAM SEES AND CONFIGURES IT!!
6th: You will see that only "system" is checked, but it isn't pointed to any file. Under the directory tab, you'll have to click on the empty space and point to where you extracted the ROM, at the file system.img.
7th: If your phone is on, turn it off and remove its battery.
8th: In flash_tool, press download. Now, connect your device to the computer and do a short "Volume Up" button press. The program will detect the phone and it will start the flashing process, which will take ~5 minutes.
9th: After the flash is done, you can close the program and disconnect your phone. Plug the battery back in and power the phone back up. After it boots up, you may get com.android.phone errors or something similar. You will have to get to Settings-Backup&Reset and reset the phone. After it's been reset, you will be able to enjoy your rooted LG K4. Good luck!
Thank you, OP for this thing. Also, some extra information, this is ranked as "Hard" to root phone by Root Checker and it is ~4600th hardest to root out of 5600 phone model numbers registered in Root Checker. Didn't expect that.
Click to expand...
Click to collapse
your welcome man!!!
I ****ed up... :S
Hey guys, damn i was so happy to see this sh!t because I bricked my phone hard when i was playing with some settings in the root directory and I was playing around with the write and read functions because I was trying to be able to write and format my sd card on my PC and anyways it ****ed up my settings so i had this "Bluetooth stopped working" or whatever pop up every 1 sec and no connection could load because of it so it was basically bricked i tried hard reset, didn't work so i was going to flash so i first tried the LG flash thingie, didn't detect the phone and when the LG mobile support tool was starting then it didn't detect the file and everything was just not going right, so in the end i found the software smart phone flash tool and researched a bit and found this thread here with the scatter file and img, so anyways i ****ed up when i was going to flash the phone with this software because i thought download meant literally downloading the software online so i checked in format all + download and left it all blank
then i held the volume button for a long time but did not see any recovery panel or anything but i saw the software load every once a while but still phone screen black so i thought that the reason the software was showing loading every once n a while was because it was maybe trying to detect the phone but not being able to so i took the cable out and then i got some error, so i thought damn maybe it was really extracting some files or something, so i think that i basically formatted the phone and download does mean extract?!?! or what?? does it download files or you have to input them manually ?
if that is the case then can you guys help me locate the missing files from a full format?
that is tee1, tee2, preloader, user data
---- EDIT ----
ok now I tried without using the above I requested and I get this error
hxxp://imgur.com/a/G0g69
--- EDIT 2 -----
Seems most information says that my preloader is corrupt and i am trying to have mtk droid root detect my phone which is identical in model and going to dump the data from there through a backup and cross my fingers hoping that the preloader is also in there and (which is going very badly since my authorization does never pop up after i enabled debugging and it never pops up in mtk and I tried reinstalling and installing and uninstalling about every single driver out there and about 10 restarts so trying to figure that out, if someone can dump the preloader it would be good
---- EDIT 3 ------
I was able to get my phone out of hard brick mode and here is a full download to what i used https://mega.nz/#!jwdSwT7T!Tn3rPS0LeZoP74ShK_7_jsqJr8ZJQ7Lg8l1OZ6Bri1Y <<< it is stock firmware 2016 with ALL software included to fix if you get in a hard brick situation or brick your device somehow then you can do a full restore from this I did a full restore with preloader and now I am only installing this pre-rooted version and it works fine, anyways all ended well and if you have any trouble with LG K 4 bricking then use this what I posted and sometimes it's good to only upload the preloader first with no battery in phone and then taking the cable from the phone and putting the battery in and then flashing all the rest with the battery and then taking cable out and starting the phone
-----THE FIX-----
Rooted lg K120AR
Hello friends of the forum I tried this rom on my LG K120AR (from Argentina) and it works correctly !!!
Thank you very much for the help!!
:laugh:
Hola , que dejaste seleccionado para flashear el 120
Hola , que dejaste seleccionado para flashear el 120ar soy de argentina tambien lo hice como decia ahi y no me pasa del logo de LG y el driver de mtp me salta error no me deja instalarlo de niguna forma para flshear lo de stock
Facufox87 said:
Hola , que dejaste seleccionado para flashear el 120ar soy de argentina tambien lo hice como decia ahi y no me pasa del logo de LG y el driver de mtp me salta error no me deja instalarlo de niguna forma para flshear lo de stock
Click to expand...
Click to collapse
justo estaba por flashearlo y vi tu comentario , es imposible rootear este aparato parece
alelovecraft said:
justo estaba por flashearlo y vi tu comentario , es imposible rootear este aparato parece
Click to expand...
Click to collapse
Entonces no es viable flashearlo?
Es una mierda todos los smarts que tuve antes los podía cocinar de cualquier forma, este nose deja porque los de LG los hicieron así, no voy a volver a comprar un LG.
RagnarLodbrokARG said:
Entonces no es viable flashearlo?
Es una mierda todos los smarts que tuve antes los podía cocinar de cualquier forma, este nose deja porque los de LG los hicieron así, no voy a volver a comprar un LG.
Click to expand...
Click to collapse
Si funcióna nada mas que el flaco que explica nada que ver todo para el culo te dice, tenes que ponel el scatter en la carpeta donde descomprimiste la rom rooteada y y en el flash tool elegí el scatter y no toques nada dale a download y listo capo , luego hace un reseteo de fábrica y ya esta rooteada esta mierda
Compa que mas hay que hacer no me reconoce el CEL, es con bateria, y en modo actulizar firmware, si le quito la bateria no lo hace nada el programa
gariasaya said:
Compa que mas hay que hacer no me reconoce el CEL, es con bateria, y en modo actulizar firmware, si le quito la bateria no lo hace nada el programa
Click to expand...
Click to collapse
Tenes que tener los driver univerales lg y presionar la tecla volumen + cuando conectas el cel a la pc en modo download
alelovecraft said:
Tenes que tener los driver univerales lg y presionar la tecla volumen + cuando conectas el cel a la pc en modo download
Click to expand...
Click to collapse
Ok vamos a probarlo así [emoji106]
Enviado desde mi LG-D850 mediante Tapatalk
gariasaya said:
Ok vamos a probarlo así [emoji106]
Enviado desde mi LG-D850 mediante Tapatalk
Click to expand...
Click to collapse
Y con la batería puesta
eniak1 said:
Hello friends of the forum I tried this rom on my LG K120AR (from Argentina) and it works correctly !!!
Thank you very much for the help!!
:laugh:
Click to expand...
Click to collapse
Como hiciste ? podrias ayudarme tambien soy de argentina mi problema es que el mio esta en banda negativa y quiero hacerlo root para sacarlo de banda
my phone in a hard brick dead...
my phone in a hard brick dead...
I tried the solutions here without success
Getting random errors 4032, 5054. 0x0FC0..
there is a solution?
I know this is random but. mine is lg k4 with marshmallow version but since I messed with it now it is lollipop. and some features are not working properly. like the cellular data for example. I tried searching for my official firmware years passed but no luck. can anyone help me. or any suggestion.
hola, tengo un problema a la hora de rootear mi cubot echo he probado con todas las apk para android y para pc y nada no me funcionan, si alguien tiene este modelo y sabe como hacerlo root que me responda porfavor, losiento si este no es el sitio pero es el unico lugar que encuentro para postear soy noob
Hi, I have a problem when rooting my cube echo tested with all the apk for android and for pc and nothing does not work for me, if someone has this model and knows how to do it root please reply me, I'm sorry if this is not the It's the only place I find to post. I'm noob
Narro69 said:
hola, tengo un problema a la hora de rootear mi cubot echo he probado con todas las apk para android y para pc y nada no me funcionan, si alguien tiene este modelo y sabe como hacerlo root que me responda porfavor, losiento si este no es el sitio pero es el unico lugar que encuentro para postear soy noob
Hi, I have a problem when rooting my cube echo tested with all the apk for android and for pc and nothing does not work for me, if someone has this model and knows how to do it root please reply me, I'm sorry if this is not the It's the only place I find to post. I'm noob
Click to expand...
Click to collapse
i found that twrp 3.0.2 edited tested worked ok .
https://www.needrom.com/download/recovery-twrp-14/
u need to register to download that file and install via sp flashtool .
and if this work i think you can install update supersu via twrp recovery ...i cant test but if you test write here if this method worked .
Procedure to instal twrp recovery:
Download and unzip the archive.
Check that the USB Preloader driver are installed and use a recent version of Flashtrool.
The device should be switched off and disconnected by PC.
Remove the Battery.
Run Flashtool, select the scatter, check that only Recovery partition is flagged, then select DOWNLOAD.
Only now Connect the device (switched off and without the battery) to the PC with a short USB cable directly connecetd to USB PC port.
Wait the end of Flashtool process (green tick).
After that you can disconnect the device from PC.
To test the recovery first insert battery and in the device pres POWER and VOLUME+ to start in recovery mode.
Procedure to root:
First open twrp recovery by presing volume up + power butons
Download supersu at these link: http://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
Put on internal or sd card and instal
I rooted cubot echo with these procedure ,stock v15 official.
removed recovery ,later i will upload last 3.1.1 wich work good on mt6580 phones
32 bit recovery and same can port .
ridesigned recovery new fonts added ,new look for best stability
download link here https://forum.xda-developers.com/attachment.php?attachmentid=4340195&d=1511446062
new rom up
Stable
based on rr 5.7.4
no lag no bug and all working
aded file explorer (more stable)
new launcher to look more awesome
now added back google camera
added new google keyboard - gboard latest
new kernel auditor
new super su
new camera added
rom is very fast and stable ...
uploading ...
https://www.mediafire.com/file/aj130d2wnl0d1v9/RR 09.12.2017.zip
launcher like in screen shots
https://www.mediafire.com/file/4h79iem0d339p26/Lawnchair.apk for launcher install as normal apk
how to install:
1 install these twrp (last) https://forum.xda-developers.com/attachment.php?attachmentid=4351007&d=1512296466
2.wipe system
3.unmount all partition (if you install from internall sd or ex leave mounted)
4.install rom
then restart phone
extract and copy folder to system/priv-app/
https://www.mediafire.com/file/isbll3s742albf1/MyosCamera.zip
new camera
google logo and bootanimation fllashable
New Rom for Cubot Echo
http://www.mediafire.com/file/q79r58uo1a2qfq6/MM-Mod-V5.zip
installation steps
boot on twrp wipe system partition
and dont mount anything just install
when installation is finish just wipe cache restart phone and wait some time .
here is web in rusian that created for cubot echos roms (need translator)
https://4pda.ru/forum/index.php?showtopic=774407
sorry for my bad english
https://drive.google.com/file/d/0B9QhNtlCkHiXbFNYMlZoUEVlMlU/view
rrezurection is good enough its based on stock with removed carrier g and 3g have extra application to configure phone and in rom lag is 100 % free ,dpi in cubot echo default is 320 in this rom is 300 look more nice but if want you can change to 320 on setings/display and light\lcd destiny ,screens later i will upload .
and rr be nice rom .
stock kernel fllashable
http://www.mediafire.com/file/28ajekpysecy4zw/Kernel.zip
http://www.mediafire.com/file/n8gj49mn1d8toch/GPU_Booster.zip
on my phone works fast ,try and let me known ...if you need to uninstal go to recovery mount system than open file manager from advanced tab at TWRP then go to system/etc and delete thermal-engine.conf
for those who port roms can put that file on system/etc and ported rom must be fast ...
google logo
installation via twrp...
Removed ,upload new stable v3.1.1 in first page of thread .
new TWRP 3.2.0 from oneplus one
port from official site ...
read here for changes
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html
Ngadhnjim said:
new TWRP 3.2.0 from oneplus one
read here for changes
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html
Click to expand...
Click to collapse
No usb mass storage option
Ikk999 said:
No usb mass storage option
Click to expand...
Click to collapse
going to upload new but its better that you screen shot cause im not sure what problem you talking
Ngadhnjim said:
going to upload new but its better that you screen shot cause im not sure what problem you talking
Click to expand...
Click to collapse
Here are the screenshots bro. There is no " Mass Storage" option on mount section.
Ikk999 said:
Here are the screenshots bro. There is no " Mass Storage" option on mount section.
Click to expand...
Click to collapse
Now see the difference . this one is from my old 3.1.1-0
Ikk999 said:
Now see the difference . this one is from my old 3.1.1-0
Click to expand...
Click to collapse
these options is to mount your device on pc like usb that dont needed because your pc reconize now your device (on twrp) as mpt.
Ngadhnjim said:
these options is to mount your device on pc like usb that dont needed because your pc reconize now your device (on twrp) as mpt.
Click to expand...
Click to collapse
Sure but can you add It anyway . Some ****ty windows XP still couldn't recognize MTP though.
Ikk999 said:
Sure but can you add It anyway . Some ****ty windows XP still couldn't recognize MTP though.
Click to expand...
Click to collapse
will try but in 3.2.0 i dont believe ,that work only with new systems and for that need to change from start.
Hello everyone,
i yesterday i bought secondhand Asus Zenphone 7 PRO stucked at CSC Fastboot MODE
When i turn on the phone it pops android icon for 1 sec then it goes automatically to CSC FastBoot Mode, then you can choose between START, Restart bootloader, Recovery mode, and Power OFF.
When you choose one of them they restart phone and again 1 sec android icon (sometimes charging icon also ) and then CSC fastboot mode .,
On PC the device can be recognise like ASUS BOATLOADER , after installing drivers it shows like Android ADB device.
Tried with platform-tools_r30.0.4-windows , on adb devices it now shows up , but when i type fasboot device it shows the serial number of my phone, and i can restart it with /fastboot reboot.
Thats all i tried stuck at this point.
Greetings
The only way to fix this is flash a full stock image.
This happened to me while trying to root. After unlocking, installing twrp, and following the rest of the directions kept booting back into twrp. After messing around with it a few more times it gave me an error that the system was corrupt and would not allow booting into anything other than crc fastboot. I was crapping my pants at the thought that I just bricked my new phone. But after a little more research I found the asus flashing tool and full image.
This is the specific link I got the flashing tool from. I see there are other versions if I do a google search. But I used this one and know it worked fine.
AFT_ASUS
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Then I grabbed this zip file, and the latest firmware from asus website. I saw the firmware from Asus was almost half the size so I was unsure what it may have been missing. Which is why I flashed the larger file from Mega first.
Also, the flashing tool gives an error about missing a frp account, you don't have to worry about that. The flashing tool likes to be started before the phone is connected as well. So if you start it and it doesn't see the phone, disconnect and reconnect and it should pop up.
Then just pick the first zip file in the tool and hit start. It took almost 10 minutes to fully write everything for me. plugged into a usb 3 port. When it is done restart it and it should be like a factory phone again. After setting it up, I copied the smaller zip i grabbed from asus to update it onto the sdcard. As soon as it was done copying the system automatically saw the zip as an update and asked if I wanted to install it.
Joeb2000 said:
The only way to fix this is flash a full stock image.
This happened to me while trying to root. After unlocking, installing twrp, and following the rest of the directions kept booting back into twrp. After messing around with it a few more times it gave me an error that the system was corrupt and would not allow booting into anything other than crc fastboot. I was crapping my pants at the thought that I just bricked my new phone. But after a little more research I found the asus flashing tool and full image.
This is the specific link I got the flashing tool from. I see there are other versions if I do a google search. But I used this one and know it worked fine.
AFT_ASUS
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Then I grabbed this zip file, and the latest firmware from asus website. I saw the firmware from Asus was almost half the size so I was unsure what it may have been missing. Which is why I flashed the larger file from Mega first.
Also, the flashing tool gives an error about missing a frp account, you don't have to worry about that. The flashing tool likes to be started before the phone is connected as well. So if you start it and it doesn't see the phone, disconnect and reconnect and it should pop up.
Then just pick the first zip file in the tool and hit start. It took almost 10 minutes to fully write everything for me. plugged into a usb 3 port. When it is done restart it and it should be like a factory phone again. After setting it up, I copied the smaller zip i grabbed from asus to update it onto the sdcard. As soon as it was done copying the system automatically saw the zip as an update and asked if I wanted to install it.
Click to expand...
Click to collapse
hello friend
you seemt to be knowledgable, do you know how i can root my zenfone 7, have you managed to root yours or get twrp installed?
articoceanic said:
hello friend
you seemt to be knowledgable, do you know how i can root my zenfone 7, have you managed to root yours or get twrp installed?
Click to expand...
Click to collapse
I was able to root mine, but the method with TWRP kept giving me a bootloop so I had to use a different way.
I used the "Method 2" listed here.
How to Install Magisk and Root Android Devices with it [2 Methods]
In this comprehensive guide, we will show you how to install Magisk Universal Systemless Interface to root Android devices. There are two different methods to install it – First…
www.thecustomdroid.com
Just make sure you pay attention to the pre-req's both the main and the method 2 specific ones.
Then it will basically go like this (assuming you already unlocked your bootloader and have adb and usb drivers already installed).
Grab latest firmware from Asus.
Copy the firmware zip to your phone storage and let it update. usually after you copy the zip and unplug your phone the system sees the update and asks if you want to apply it.
Download and install Python.
Grab payload dumper I attached to this post and extract the contents to your Python install directory.
Open the firmware zip and pull out the "payload.bin" file and put it in your python directory.
Open a command window in the python directory and run these 2 commands.
python -m pip install protobuf
python payload_dumper.py payload.bin
While that is extracting, download the latest Magisk apk, then copy it to your phone and install it.
In your python directory there should be a new folder called "output" look and see if the "boot.img" is done extracting. its the only thing you really need from it. Copy that boot.img file your phone storage (SD card preferrable if you have one).
Open Magisk manager on your phone, click "install" next to Magisk. It will ask for the method, choose to patch a file. Then select the boot.img file you copied.
After it is done look in your phones download folder for a "Magisk_Patched.img", copy that file to your adb folder.
Reboot your phone into fastboot mode.
Open command window in your adb folder. and run these commands
fastboot devices
fastboot flash boot magisk_patched.img
The first one should list your phone, if it does not, you don't have it in fastboot mode. I had that problem at first, I had it in recovery instead of fastboot.
After it is done flashing, reboot your phone with
fastboot reboot
Then you should be ready to go, although I had to go back in the manager and install Magisk a second time myself. Plus I had to use the manager to install the "Magisk hide" module and hide it from a few apps. Things like google pay don't like to work if it detects root. But hiding it from that app works great.
I am having the same problem. The AFT_Asus tool from above doesnt seem to work any more, saying too old on installation.
What I have found is Asus_Zenfonr_FlashTool_v2.0.1, which installs ok.
After starting the app and connecting the fone, I get disconnected and a warning that battery is at -1%, which is not true, its fully charged. There is nothing more I can do, Browse asks to connect the fone, hitting yes shows the same screen again.
Did somebody else run into this problem or has a working Asus flash tool?
Same issue please help
23598685 said:
I am having the same problem. The AFT_Asus tool from above doesnt seem to work any more, saying too old on installation.
What I have found is Asus_Zenfonr_FlashTool_v2.0.1, which installs ok.
After starting the app and connecting the fone, I get disconnected and a warning that battery is at -1%, which is not true, its fully charged. There is nothing more I can do, Browse asks to connect the fone, hitting yes shows the same screen again.
Did somebody else run into this problem or has a working Asus flash tool?
View attachment 5379741
Click to expand...
Click to collapse
IronSingh said:
Same issue please help
Click to expand...
Click to collapse
You did correct getting the new version, but you also need an updated driver.
I found one that works. The phone still says it is 0%, but it let me connect it this time and after selecting the image lit up the start button. I didn't want to completely wipe my phone at the time and try to redo everything so I did not hit start, but at least you can install the new drivers and give it a try yourself.
I got them from here.
Zenfone 8｜Phones｜ASUS USA
A new compact powerful choice: Flagship 5G processor · 120Hz AMOLED display · 4000mAh battery · Pro-grade dual rear and front camera · IP68 water resistant
www.asus.com
For some reason they don't even list the zenfone 7. it goes from 6 to 8.
But you can select the windows 8.1 64bit drivers (or x86 if you are running a 32bit system). Download and install those. It may have you reboot after, please do it.
Just in case you do not know how to install these kind of drivers. Simply extract the zip, then inside go into the "windows_xp_vista_7_8_8.1" folder, then into the "android" folder, and there will be a file called "android_winusb.inf" unless you have file extensions hidden, then it won't have the .inf on the end. But simply right click on it and it should say "install" as the second option on your right click menu. Just click on install and it should only take a couple seconds.
Thanks but I unpacked the latest zip from on official site and then just fastboot flashed everything. I have a custom script if someone wants.
Joeb2000 said:
The only way to fix this is flash a full stock image.
snip
Then I grabbed this zip file, and the latest firmware from asus website.
Click to expand...
Click to collapse
Man thank you very much for your help. I was able to recover the device using the zip file.
I was never able to get the flash tool working, the device did not connect. Even with the latest USB drivers.
How I got is working is download and unzipped the zip file from above, connected using fastboot , then ran dl_multiple_update_image.sh.
I am on Linux and had to buy a Windows 10 notebook just for this crappy flash tool, looks like this was not needed. If anybody is on Windows, there is a dl_multiple_update_image.bat file included in the Zip file.
23598685 said:
Man thank you very much for your help. I was able to recover the device using the zip file.
I was never able to get the flash tool working, the device did not connect. Even with the latest USB drivers.
How I got is working is download and unzipped the zip file from above, connected using fastboot , then ran dl_multiple_update_image.sh.
I am on Linux and had to buy a Windows 10 notebook just for this crappy flash tool, looks like this was not needed. If anybody is on Windows, there is a dl_multiple_update_image.bat file included in the Zip file.
Click to expand...
Click to collapse
Um virtual box?
and this is latest
you can also fastboot to recover
Try to flash with RAW
WW-ZS670KS-31.0210.0210.287-REL-2207-M3.35.19.26-SM8250_001522-ASUS_1.1.1-user-20220727.zip
digitalmaxMG said:
Olá pessoal,
ontem eu comprei o Asus Zenphone 7 PRO de segunda mão preso no CSC Fastboot MODE
Quando ligo ou telefone, aparece o ícone do Android por 1 segundo, depois vai automaticamente para o modo CSC FastBoot, então você pode escolher entre INICIAR, Reiniciar ou carregador de inicialização, Modo de recuperação e Desligar.
Quando você escolher um deles, eles reiniciam o telefone e novamente 1 segundo ícone do Android (às vezes também ícone de carregamento) e, em seguida, o modo CSC fastboot.,
No PC, o dispositivo pode ser reconhecido como ASUS BOATLOADER, depois de instalar os drivers, ele mostra como um Android ADB.
Tentei com platform-tools_r30.0.4-windows , em dispositivos adb agora aparece, mas quando digito fasboot device, ele mostra o número da série do meu telefone e posso reiniciá-lo com / fastboot reboot.
Isso é tudo que eu tentei neste momento.
Saudações
Click to expand...
Click to collapse
Joeb2000 said:
A única maneira de corrigir isso é fazer o flash de uma imagem completa.
Isso aconteceu comigo ao tentar fazer o root. Depois de desbloquear, instalar o twrp e seguir o restante das instruções, continuei inicializando novamente no twrp. Depois de brincar com ele mais algumas vezes, deu-me um erro de que o sistema estava corrompido e não permitiria a inicialização em nada além do crc fastboot. Eu estava cagando nas calças com o pensamento de que acabei de emparedar meu novo telefone. Mas depois de um pouco mais de pesquisa, encontrei a ferramenta de flash da asus e a imagem completa.
Este é o link específico de onde peguei a ferramenta piscando. Vejo que existem outras versões se eu fizer uma pesquisa no google. Mas eu usei este e sei que funcionou bem.
AFT_ASUS
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Então peguei este arquivo zip e o firmware mais recente do site da asus. Vi que o firmware da Asus tinha quase metade do tamanho, então não tinha certeza do que poderia estar faltando. É por isso que eu pisquei o arquivo maior do Mega primeiro.
Além disso, a ferramenta piscando dá um erro sobre a falta de uma conta frp, você não precisa se preocupar com isso. A ferramenta intermitente também gosta de ser iniciada antes que o telefone seja conectado. Portanto, se você iniciá-lo e ele não vir o telefone, desconecte e reconecte e ele deverá aparecer.
Em seguida, basta escolher o primeiro arquivo zip na ferramenta e clicar em iniciar. Demorou quase 10 minutos para escrever tudo para mim. conectado a uma porta usb 3. Quando terminar, reinicie-o e ele deverá estar como um telefone de fábrica novamente. Depois de configurá-lo, copiei o zip menor que peguei da asus para atualizá-lo no sdcard. Assim que terminou de copiar o sistema automaticamente viu o zip como uma atualização e perguntou se eu queria instalá-lo.
Click to expand...
Click to collapse
Eu tenho um rog 3 e tenho o mesmo problema. Não consigo encontrar o celular no pc para fazer os procedimentos. Instalei drivers e ainda não consigo encontrar o dispositivo, você pode me ajudar?
Widney2 said:
Eu tenho um rog 3 e tenho o mesmo problema. Não consigo encontrar o celular no pc para fazer os procedimentos. Instalei drivers e ainda não consigo encontrar o dispositivo, você pode me ajudar?
View attachment 5689357
View attachment 5689355
Click to expand...
Click to collapse
First of all english please. What Machine are you on Windows, Mac, Linux?
If your on windows please share screenshot of your Device Manager
IronSingh said:
First of all english please. What Machine are you on Windows, Mac, Linux?
If your on windows please share screenshot of your Device Manager
Click to expand...
Click to collapse
Worse, I wrote everything in English before sending.
Windows 10.
Widney2 said:
Worse, I wrote everything in English before sending.
Windows 10.
Click to expand...
Click to collapse
Update your windows and install the drivers
https://mega.nz/folder/OjpFmSQb#MLT96tXlhzmKbtGWtXrApQ drivers
IronSingh said:
Update your windows and install the drivers
https://mega.nz/folder/OjpFmSQb#MLT96tXlhzmKbtGWtXrApQ drivers
Click to expand...
Click to collapse
I did the procedure with this driver installed and it does not find the device rog phone 3 and I have already installed many drivers and finally this one that you sent me I could not find in adb and asus flash tool, thank you very much for your help.
Widney2 said:
I did the procedure with this driver installed and it does not find the device rog phone 3 and I have already installed many drivers and finally this one that you sent me I could not find in adb and asus flash tool, thank you very much for your help.
Click to expand...
Click to collapse
Your device manager stays the same?
IronSingh said:
Your device manager stays the same?
Click to expand...
Click to collapse
Yes
Widney2 said:
Yes
Click to expand...
Click to collapse
download this install it and then Update windows.
I need root on my Cubot Note 20, but I can't figure it out
1) This guide soft-bricks my device: https://www.ayudaroot.com/root/rootear-cubot-note-20/ (so don't follow this tutorial if you are a Cubot Note 20 owner !!!)
2) At least there's a decent unbrick guide officially from CUBOT: https://cubot.net/platform/Support/detail/id/406/cid/30.html
3) Then I tried patching the boot.img with Magisk and flashing it with SP_Flash_Tool (like in step 2 - just with the boot.img file replaced) --> but that gives some signature failiure on boot --> bootloop again
So now my device is unbricked for the second time But I really need OTG and it's only possible to enable it when I'm rooted...... Can someone please help me?
I am to dumb to figure out how to post a new thread on here. However after much research, trial and error I have discovered how to root this properly!!!
WARNING after root. DO NOT RESTART PHONE UNTIL YOU RENAME "recovery-from-boot.p" FOUND UNDER /SYSTEM
***CUBOT NOTE 20 PRO***
Enable Developer Options In Android 10
Head over to the Settings app of your device via the notification shade or app drawer.
Scroll down and tap on ‘About phone.’
Find an entry labeled ‘Build number.’ Keep on tapping until you see a prompt that says ‘You are now a developer!’. You will be prompted to enter your device’s unlock code (PIN/Pattern/Password) at this point
Next go to Settings -> System -> Advanced -> Developer Options
Tap the slider on "OEM Unlocking" and "Enable USB Debugging"
Extract the attached file
Install MTKdriver.exe
plug phone into computer. Windows SHOULD install drivers for adb automatically
run file "flash - root.bat"
you are rooted.
***ANY CUBOT PHONE***
Follow directions provided by Magisk to root boot.img
Cubots has a BOOT.IMG VERIFICATION IMAGE!!!! .........
Flash the boot image with fastboot as directed
download "vbmeta(root).img"
put in folder with fastboot
run code - fastboot flash vbmeta vbmeta(root).img
**********DO NOT BLAME ME FOR FAILURE USE AT YOUR OWN RISK************
gosh please someone help me i did the instructions and my phone is bricked how can i fix it?
ConverterDreamer said:
gosh please someone help me i did the instructions and my phone is bricked how can i fix it?
Click to expand...
Click to collapse
thank God it works again xd and its rooted now
Owners of Cubot Note 20 Pro: does your phone support dual frequency (L5/E5) GPS?
Can be verified with this opensource app: https://play.google.com/store/apps/details?id=com.android.gpstest
Text L5 or E5 in "CF" column means dual freq is supported.
We need a new thread started on this phone with topics such as rooting and custom Roms.Not only does it come with a removable battery but it has a huge battery and ram.We desperately need some experienced developers to look help out.
Hey guys!
I finally managed to root my brand new Cubot Note 20 not with Magisk Manager but with adb + fastboot downloaded from this link: https://www.getdroidtips.com/flash-...all_the_Patched_Boot_Image_on_MediaTek_device.
Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation, it's just to give an orientation. Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation,.Now Titanium is already running on my terminal and removing the Gapps. Happy!
jediroadkilk said:
I am to dumb to figure out how to post a new thread on here. However after much research, trial and error I have discovered how to root this properly!!!
WARNING after root. DO NOT RESTART PHONE UNTIL YOU RENAME "recovery-from-boot.p" FOUND UNDER /SYSTEM
***CUBOT NOTE 20 PRO***
Enable Developer Options In Android 10
Head over to the Settings app of your device via the notification shade or app drawer.
Scroll down and tap on ‘About phone.’
Find an entry labeled ‘Build number.’ Keep on tapping until you see a prompt that says ‘You are now a developer!’. You will be prompted to enter your device’s unlock code (PIN/Pattern/Password) at this point
Next go to Settings -> System -> Advanced -> Developer Options
Tap the slider on "OEM Unlocking" and "Enable USB Debugging"
Extract the attached file
Install MTKdriver.exe
plug phone into computer. Windows SHOULD install drivers for adb automatically
run file "flash - root.bat"
you are rooted.
***ANY CUBOT PHONE***
Follow directions provided by Magisk to root boot.img
Cubots has a BOOT.IMG VERIFICATION IMAGE!!!! .........
Flash the boot image with fastboot as directed
download "vbmeta(root).img"
put in folder with fastboot
run code - fastboot flash vbmeta vbmeta(root).img
**********DO NOT BLAME ME FOR FAILURE USE AT YOUR OWN RISK************
Click to expand...
Click to collapse
Gulpiyuri said:
Hey guys!
I finally managed to root my brand new Cubot Note 20 not with Magisk Manager but with adb + fastboot downloaded from this link: https://www.getdroidtips.com/flash-...all_the_Patched_Boot_Image_on_MediaTek_device.
Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation, it's just to give an orientation. Extracting the boot.img and reinserting this same patched.img sorry for the bad explanation,.Now Titanium is already running on my terminal and removing the Gapps. Happy!
Click to expand...
Click to collapse
Need help in finding a working recovery for the Cubot Note 20 Pro. After root I tried flashing the Twrp version 3.4.0-by nemo-nemo and it just stays on the TWRP splash screen. Ive also tried other TWRP versions and recovery's like orange fox but with no luck. I was hoping that someone with more expertise could help in some way.
elimoviebuff said:
Abbiamo bisogno di un nuovo thread avviato su questo telefono con argomenti come rooting e ROM personalizzate. Non solo viene fornito con una batteria rimovibile, ma ha una batteria e un'enorme RAM. Abbiamo un disperato bisogno di alcuni sviluppatori esperti che cercano aiuto.
Click to expand...
Click to collapse
Qualcuno può aiutarmi con la connessione hotspot con cubot 20 note pro ? La uso per connettermi con il mio PC e ogni volta vedo che ci sono utenti sconosciuti connessi alla mia rete . In questo telefono non vi è modo di vedere chi sia , né di impostare il numero di utenti max connessi. Ho cercato di reperire notizie ovunque, persino all'assistenza (inesistente) del produttore. Helppppp!!