SamdroidMod 2.0.1.alpha.8.3 - Froyo [AOSP] for i5700 - Galaxy Spica Android Development

WARNING: THIS METHOD CAN BE DANGEROUS. DON’T DO ANYTHING IF YOU DO NOT KNOW WHAT YOU DO.
I AM NOT RESPONSIBLE IF YOU TRANSFORM YOUR SPICA INTO A BRICK
You need to have LK2.xx with Recovery for install Froyo!
Backup your data before install this alpha.X
Many thanks to criminal, DE-NISkA, vflashbirdv, antibyte, Gabriel-LG, qbanin and many others who helped!
Languages
CHANGELOG
Status (hardware)
+ GSM
+ GPRS/EDGE/3G
+ audio
+ wifi
+ bluetooth (thanks criminal)
+ sensors (thanks DE-NISkA)
+ GPS
+ multitouch (2.4, thanks Gabriel-LG)
+ SD/USB
+ Camera
+ ext2/4 support
Status (software)
+ FileManager (from CyanogenMod)
+ Samdroid.Net Recovery
+ ADWLauncher
How to install
1. Download (with Google Services): SamdroidMod-2.0.1-alpha8.3.zip (65.49 MB)
2. Put it to SD card
3. Enter to Recovery
4. Wipe data & cache if you use Android 2.1 (SamdroidMod 1.x.x)!
5. Apply SamdroidMod-2.0.1-AlphaX.zip
6. Reboot
7. Play
Head over to the discussion thread for questions, bug reports and feedback.
http://forum.samdroid.net/f56/samdro...scussion-3022/
If you like my work, click here
ALL CREDITS TO LESHAK @ SAMDROID.NET

8.5 is ready to install

8.5 is where?

SamdroidMod 2.0.1.alpha.8.5 - Froyo [AOSP] for i5700
geko95gek said:
8.5 is where?
Click to expand...
Click to collapse
Backup your data before install this alpha.X
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG
Status (hardware)
+ GSM
+ GPRS/EDGE/3G
+ audio
+ wifi
+ bluetooth (thanks criminal)
+ sensors (thanks DE-NISkA)
+ GPS
+ multitouch (2.4, thanks Gabriel-LG)
+ SD/USB
+ Camera
+ ext2/4 support
Status (software)
+ FileManager (from CyanogenMod)
+ Samdroid.Net Recovery 0.1.3.b6
+ ADWLauncher 1.3.3
How to install
1. Download (with Google Services): SamdroidMod-2.0.1-alpha8.5.zip (65.22 MB) | mirror 1
2. Put it to SD card
3. Enter to Recovery
4. Wipe data & cache if you use Android 2.1 (SamdroidMod 1.x.x)!
5. Apply SamdroidMod-2.0.1-AlphaX.zip
6. Reboot
7. Play
TODO / BUGS
- libwpa_client.so fix (1,2)
- Wifi tethering
- DivX (for s3c6410)
- Check & fix sensors
- Speed (ch33kybutt)
I recommand : CyanogenMod-6.1.0-Spica-alpha8

Related

CyanogenMod-7.2-NIGHTLY-Spica-alpha7.2 (ALL Credits to tom3q and samdroid)

WARNING: THIS METHOD CAN BE DANGEROUS. DON’T DO ANYTHING IF YOU DO NOT KNOW WHAT YOU DO.
I AM NOT RESPONSIBLE IF YOU TRANSFORM YOUR SPICA INTO A BRICK
(Although flashing XSR-based a.k.a old ROMs can be more dangerous, because of XSR brokenness.)​
You need to have at least LK2.xx with recovery (or ANY other ROM with recovery) to install this ROM and follow all the instructions CAREFULLY and EXACTLY!​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Status
+ GSM
+ Audio
+ SDCard/USB mass storage
+ Wifi
+ Bluetooth
+ 2D/3D HW acceleration (using OpenFIMG, no Samsung libs)
+/ Multitouch
+/ GPS
+/ Accelerometer
- Compass/magnetometer
- Camera
- Bluetooth audio (voice headset, not A2DP)
- Hardware video encoding/decoding
Known Issues
Flash_kernel.zip fails with "cannot mount TMP:" error. Flashing other .29 kernel (like latest VOKU's) before applying flash_kernel.zip should help.
Phone gets stuck in recovery after flashing flash_kernel.zip. Flash a boot logo (less than 128KB!) in Odin with Debug only and Parameter clear options selected.
Neither samdroid nor native app2sd doesn't work (some application from Market to move applications to SD card is known to work as a replacement).
Multitouch works only for some applications.
Reboot to recovery doesn't work. (Use 3 key combo, Volume Down + Call Accept + Call Disconnect)
Many 3D applications don't work correctly. This is because of an unfinished graphics driver, which had to be used, because Samsung driver isn't compatible with Android 2.3.
USB driver fails to install on Windows 7. Follow this tutorial to install it manually: [Discussion] CyanogenMod-7.1-NIGHTLY-Spica-alpha5.1 using driver from this post: [Discussion] CyanogenMod-7.1-NIGHTLY-Spica-alpha5.1
WLAN reboots the phone after long inactivity with screen turned off. (15 or 30 minutes)
WLAN tethering is unsupported
Data traffic statistics aren't implemented yet
Fixes/Changelog (from Alpha 7.1)
Updated CM sources
Updated OpenFIMG sources
Fixed power widget network mode switch bug
Added workaround for I2C bus getting stuck (hardware problem)
Switched to interactive cpufreq governor
​+ other minor fixes
Remember, this is a test version, it isn't guaranteed that everything works correctly! However tom3q will try to do his best to fix everything that doesn't.
video spica running this MOD
Visit here (samdroid) for more informations include installation and needed files and discussion
--------------------------------------------------------------------------------------------------------
ALL CREDITS GOES TO tom3q

[OPPO R821][COOK ROM]Pure ColorOS 1.0.2i only for OPPO Find Muse R821

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a pure ROM I was cleanup all don't needed app and some system files and tweak something for perfomance system. FOR A PURE COLOROS ROM
And this is infomation of ROM :
----------------------------------------------------------
Features : ​- full ColorOS APP and Features
International language and network
Vistor Mode
App encryption
Quiet Time
Notification center
Data saving
Permission monitor
Virus detection
Theme
Power Manager
Data monitor
Backup and Restore
File manager with FTP and DLNA
- Tweaked build.prop for perfomance
Disable checking JNI
Allow Dalvik to use JIT Compiler
Low CPU in sleep mode
- Replace some app
OppoNotes ->Google Keeps
Swype -> Google Keyboard
- Delete don't needed app and system files
NearSync
OCloud
LiveWallpaper
Kinect
Hotknot
Flash light
OTA
----------------------------------------------------------
BUGS:
- Tested. No bugs (post is if you found ! Plz)
----------------------------------------------------------
SCREEN:
(BELOW THIS THEARD)
----------------------------------------------------------
DOWNLOAD:
FULL WIPE INSTALL : ColorOS_R821_20141216-full-wipe.zip​
----------------------------------------------------------
INSTALL​- Installed CWM Recovery
- Copy ROM to sdcard
- Reboot Recovery
- Full Wipe device
- choose and install ROM. Wait until "Install from sdcard complete" (If error "Installation aborted", please reboot to recovery and flash again)
- Then, Reboot to ColorOS
- After boot complete :
If Google Keyboard not open, please reboot, Keyboard will active
You must update Google Play Service to use Google App
----------------------------------------------------------
DISCLAIMERS​
THIS ROM HAS BEEN TESTED AGAIN AND AGAIN MANY TIME. AND DEVICE NORMAL OPERATION. THIS ROM NOT DAMAGE TO BOOT OF DEVICE.
PLEASE REMEBER THAT, THIS ROM FOR OPPO R821 AND OPPO R821T ONLY
I ASSUME THAT YOU ALREADY KNOW THE RISK OF DOING THIS AND I'M NOT RESPONSIBLE FOR THE BRICK OF YOUR PHONE. BACKUP YOUR ROM FIRST.
HOWEVER, IF YOU'RE HAVE A PROLEMB, I'LL DIRECTIONS TO FIX YOUR ROM IF I CAN
----------------------------------------------------------​IF YOU LIKE IT, DONATE DEV -> DONATE $1.2

[RECOVERY] Carliv Touch Recovery 3.3 for O+ 8.38

O+ 8.38/z CTR recovery​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And also a vid: https://youtu.be/PR8p1Cv7cLw
What I used to flash it: DsLNeXuS' Rashr
Flashify does not work as it gives an error copying its log file
Changelog:
2.0
- Themed
- Animated installing screen (The three block thing)
- Bug fixed USB storage
Version: stable v2.0
- Download link: https://www.androidfilehost.com/?fid=24385658843824662
- For 8.38z (blind port): https://www.androidfilehost.com/?fid=24686681827313260
Untested features:
- Done testing!
Tested:
- SDcard mounting
- mount USB storage option
- Touch screen
- Backup/Restore feature
- Factory reset (Wipe data & cache)
- Flashing zip
Bugs:
- Stable!
Please tell me what you think of my recovery via PM or replying to this thread!
Thanks @carliv!
3DMapPlayer said:
O+ 8.38/Z CTR recovery​
And also a vid: https://youtu.be/PR8p1Cv7cLw
What I used to flash it: DsLNeXuS' Rashr
Flashify does not work as it gives an error copying its log file
Changelog:
2.0
- Themed
- Animated installing screen (The three block thing)
- Bug fixed USB storage
Version: stable v2.0
- Download link: https://www.androidfilehost.com/?fid=24385658843824662
Untested features:
- Done testing!
Tested:
- SDcard mounting
- mount USB storage option
- Touch screen
- Backup/Restore feature
- Factory reset (Wipe data & cache)
- Flashing zip
Bugs:
- /storage/sdcard1 is the EXTERNAL SDcard while /sdcard is the INTERNAL sdcard (/data/media)
Please tell me what you think of my recovery via PM or replying to this thread!
Thanks @carliv!
Click to expand...
Click to collapse
Do you O+ 8.38z stock rom? ,, my phone is bricked and I badly need it
It didn't work for me :/
how to go to recovery ?
pls make
Pls make for O+ grande TWRP

[ROM][7.1.1][C106][TWRP] JUI ROM VR12 by Cuoco92

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is modded JUI ROM by @Cuoco92 running on android 7.1.1. I do not own and make this ROM but I have asked for @Cuoco92 permission to make a thread here so that we can all refer and share this ROM in one, easy and organized place​.
I'm using C103 device but so far this ROM is working fine for me with working wifi, hotspot, bluetooth, compass and fingerprint.
Installation :​1. Boot into TWRP
2. Make a backup (optional. I don't need backups because I'm flashing this right from the beginning, migrating from EUI)
3. Wipe>Format Data (this is to remove device encryption so that you can see your internal memory in TWRP)
4. Wipe>Advanced>Cache, Dalvik/ART, System, Data (wipe)
5. Copy ROM into internal memory.
6. Go back to TWRP main page and select Install.
7. Flash the ROM.
8. Device will be automatically restarted after flashing finished. Don't worry if it does.​
Downloads :
- ROM (VR12 from GDrive)
- VR10 (stable, from AFH)
Features :
- Android 7.1.1 Nougat
- New recents compared to the iOS like EUI
- Tethering data limit
- Auto connect in File Transfer Mode
- Dolby and Viper4Android pre-installed
- Latest 3.2.1 TWRP automatically flashed after ROM flash finished.
- CameraHAL3 enabled ( in Cuoco app ; pre-installed with ROM)
- Adaway pre-installed (also in Cuoco app)
- Rooted with Magisk v16.3
What's working :
1. Wifi and tethering
2. Fingerprint unlock
3. Root
4. Compass
5. SLR (bokeh), Mono Mode in camera.
6. Band 3 and Band 5 LTE, WCDMA, GSM.
7. Pretty much everything so far...
What's Not Working :
- Some users reported speaker bugs coming from C103 devices. You can try this fix here​
Special thanks to @Cuoco92 for this wonderful ROM and for allowing me to create a thread for his ROM here. Check out all of his wonderful work in AFH here :​
Screenshots :​
Some camera samples :
Bokeh :
Mono :
Auto :
reserved #2
Thread closed.
https://forum.xda-developers.com/android/development/rom-jui-rom-vr12-cuoco92-t3780509

Pixel Master Port (UN-OFFICIAL) :

Pixel Master Port (UN-OFFICIAL)
DISCLAIMER:
I wont be held responsible for bricked devices or dead MicroSD and USBs.
Modifications comes with no warranty, by installing this you agree doing it at your own risk.
TESTED ON ZENFONE 5z EVOLUTION X 5.3 !!!
TESTED ON ZENFONE 3 SUPERIOR OS !!!
What's working:
1) 1X - 4X zoom
2) 0.5 wide angle
3) auto HDR
4) Camera settings
5) Google Lens
6) beauty Mode
7) Video up to 4K 60 fps
8) slo-mo 240 fps ---- bit buggy
9) Time-lapse
10) PRO mode
11) Timer
12) flash
13) filters
14) all the aspect ratios
15) selfie
16) Camera settings
17) standby mode
18) Dynamic Theme (Dark / Light mode according to SystemUI )
What's not working:
1) PANO ---- crashes the app
2) AI Scene Detection
3) Portrait mode
4) HDR++ ---- buggy (works sometimes)
5) Instant Camera ----- if double press power button is used for another function
6) other apps (gallery needs re-sighing, face unlock depends upon the rom you're using)
7) YOU NAME IT...
How to Install:
- Download the zip from the given link
- place the zip in your MicroSD card
- boot into TWRP
- in the install section Select MicroSD card
- Flash the zip file
- reboot to system
- if you don't see the app extract the zip from microSD
- install the app from apps/AsusCamera/AsusCamera.apk
- If installation fails then re-sign the AsusCamera.apk
- now open the app
- allow permissions
- enjoy !!!
DOWNLOAD:
moved : here
hangout with me on:
Twitter | Instagram
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for sharing

Categories

Resources