Giving WiFi priority over data - Touch Pro, Fuze General

Hi all,
I have a data usage question.
I have an AT&T Prepaid SIM card in my Fuze right now, and am only using it to make calls.
Today I was playing around with some open WiFi in my area and didn't realize that MEDIANet was sucking down the data instead of the WiFi, which was connected.
Is it possible to disable data usage through the phone, and to ONLY use WiFi for the data (without disabling the phone radio in the communication manager)?

Search for Nodata.exe (from modaco). It will do it. Or, you can disable the connections directly in the registry. You'll need to look here (for a similar reg key):
HKLM\Comm\ConnMgr\Providers\{guid}\Connections\internet2.voicestrea
This is for a t-mobile data connection (the guid will be a long hex-number). Change the value for 'enabled' from 1 to 0.

you, sir, are a god among men

Related

Opera using 3G / EDGE?

I just signed up for a regular plan without the "data plan" meaning i dont get wireless internet. I plan on only using WiFi, but i just tried using opera, and typed in yahoo.com and it started to go to the site with wifi off.
How can i completely shut off internet except for wifi so i dont get charged!!!!
blahhh!
One way would be by going to Start / Settings / Connections (tab), press the Connections icon and then the link "Manage my existing connections" and ensure that no connections are set up. If there any just delete them.
A safer way would be to call your carrier and have them disable data on the account so it is their responsibility not yours. (had to do it for my son's phone)
Hi Here is an application
Hi Here is an application (cab) by installing it you can disable or able your GPRS/3G connection whenever you like.

Any way of knowing if data is coming through 3G or WiFi?

Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
ryanbryan said:
Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
Click to expand...
Click to collapse
The icons on your task bar should indicate if you have a active data connection.
Or, you can use Spb Wireless Monitor (which you need to purchase). It produces reports telling you which software uses which connections and the amount of data transferred.
In a discussion I had with HTC Tech Support, they told me that wifi, when enabled, over-rides the cellular data. I'm not sure if this just applies to the settings or always. Hopefully, someone can provide a definitive answer.
Yes that is correct, if WIFI is enabled you WILL NOT have a cellular data connection.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
What all you are saying is true but some applications still use the data network even if wifi is turned on and connected it seems. I have the same issue(i don't have a data plan with my fuze since my college has wifi everywhere). But things like weather and other native apps on the phone will just turn on the 3g network and stat using data instead of wifi.
if a device is transfering data over gprs/3g whatever
it show arrows moving in the signal str icon
otherwise it use wifi
Applications can choose to use a certain connection if they are programmed to do so, windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes. This ranking is called the "Interface Metric" if you'd like to learn more about it.
There's an HTC program called 'bytecounter' that monitors the SMDx: ports in the system, which are the ports the system uses for data.. in bytecounter you will see the values increase if an application is using data over cellular network. let me know if you'd like me to upload it.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
Click to expand...
Click to collapse
Well that wasn't particularly helpful. I too have made the same assumption, but the question asked if there was any way to make sure.
windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes
Click to expand...
Click to collapse
Well that was the kind of answer I was looking for, and is particularly pertinent in my case, as my connection through my mobile provider is about as fast (or maybe even faster) than my fixed line connection at home. A rather bizarre situation, but such is the advancement of Australian broadband infrastructure.
The last couple of times I have used it, I have taken to turning off the phone connection so that only WiFi is running, and then using the internet. It would be good if you can upload the byetcounter program, seems like a free (?) version of the software programatix mentioned.
Here ya go!
Maybe this is just me, but when I try to unzip that file, nothing comes up....?
lol, i always forget to remove the hidden attribute.. let me go ahead and fix that..
Edit: fixed
Newer Windows Live (including the one that come with Touch Pro) will always dial-up the 3G/GPRS connection when checking for email in Messaging. But if you are checking in Windows Live, most of the time it doesn't dial-up but sometimes, it does.
So far that is the only program that I know of behaves like this. I contacted Microsoft regarding this and they keep asking me to contact my celular provider for help. In other word, they are not helping (or do not understand the problem).
Anyway I solved the problem by changing the Connections setting to "My Work Network" for Internet. The catch is, if I really want to use 3G/GPRS, I'll have to change the setting to my celular 3G/GPRS connection.
Or you could use the nodata application from modaco and disable whenever you like the cellular 3g connection just to be sure you are using wifi.When you are away from wifi networks you can in a matter of 2 clicks reenable the cellular 3g connection...

Wifi and Data connection questions

Gday guys, ive noticed if my phone goes into standby, the wifi will switch off and the data connection (gprs) will bein usage, costing me money!
Anyway to keep wifi on while the phone goes into wifi? Anyway to disable all gprps access easily and then switch it on when i need?
it depends on your settings I think. If you setup the phone to use a data plan, then it will use it on regular and standby when your software sends updates
if you set it for Wifi, Likewise
Honestly, the 30$ a month I pay for unlimited data is worth it, you should consider it.
Not all of use are privileged with unlimited data plans
To OP, I think you can change the settings using Advanced Config
use advanced config to allow wifi to stay on during standby. its under menu - more settings. also if you dont have a data plan, remove the provider settings from your phone

Can I turn off data plan access on AT&T Smart Phone?

So I've had this HTC S743 for about 5 days and I thought I had it setup correctly to use wifi for data comm.
wifi enabled and selected to use my home network. I can see the radio tower status icon and my locally named network is also displayed.
Under the comm manager the data connection is off.
I have a very simple $45/mo plan with no monthly data plan.
Over the last 5 days I have been surfing the web a bit did some email tests with my ISP and used the on board GPS app which is horrible. Not heavy usage but experimentation to see if I like how the phone works.
After 2 days I get an email from AT&T that I have extremely high data usage exceeding my account limit (for having no monthly plan) and that I should sign up for a data plan at once.
$29 over 2 days for this little bit of fluff? A total of 2,900kb in data.
So I call up AT&T and they tell me this and that and want me to sign up for a plan which I may do. But I want to be able to know that the datacomm is happening via WIFI when I can see a selected WIFI is in service.
They also told me that all GPS data is forced through 3G and bypasses WIFI???
Can anyone here give me an idea about what I may be doing wrong and whether AT&T is correct about the GPS service?
Is there a better GPS app that doesn't do this? This one pretty much stinks anyway. A resolution of 1000 meters doesn't cut it.
AT&T also informed me that I can't have a smart phone without a data contract. Really? I've had one for 6 years like that but it wasn't WIFI capabale and too small to bother with web access.
Thanks for any light you shed on the subject.
One thing I have subsequently found out is that if data connection is off and WIFI is off then when I go into IE and start surfing it does bring up pages. Then when I go back to the Comm Manager the Data Connection to check the status of my connections it is still off for an instant and then it automatically turns itself on as though it had been turned on by use of IE and the status was just being updated.
Last night I installed a newer version of Google maps and was only able to install it via the web browser as opposed to via the Activesynch application on my PC. I was concerned that this might trigger turning on the 3G connection. So I had it set up for a WIFI connection ONLY and installed the app. Afterwards I went into the connection manager and once again the data conn. was turned back on so it's possible that it utilized AT&T's 3G network instead.
Is there any way to control or stop this?
GPS data doesn't have anything to do with 3G/Wifi data......
I know it's supposed to be positioning via the satellites through the GPS antenna but the the description data is coming over the network right? So it appears that even though I'm setup for WIFI access and it's showing as connected with an IP address etc. when I try the Googlemaps GPS app it turns the data conn. for 3G back on.
Thanks for chiming in ...
I have been copying over and installing some new apps to try out this morning via usb. WIFI is on and I'm loged in. None are datacomm oriented that I know of (unless they'r trying to make an internet access to notify about being installed) none the less I just checked again and my data conn. is once again turned back on. Is this typical behavior for a windows mobile phone (6.1) or is this just an AT&T "feature".
Sorry, I don't have a WM6 phone!

[Q] Disable Data Connection

I don't have a WP7 device yet, but I am considering getting one. I am looking to disable all data (over the network) before actually starting to use the phone.
- Specifically, I was wondering how the network/connection settings were configured on a STOCK WP7 phone (in comparison to, say, WM6.5). The reason I want to know this is because I want to disable data (over the network) at all times... and I want to do this prior to actually using the phone (with my SIM card in it).
In WM6.5 (and earlier), the network/connection settings allowed you to create a "dummy" network that the phone would connect to (instead of allowing the automatic connection to the data network). All you had to do was tell the phone to connect to a network that didn't exist (so that it wouldn't ever connect to the data network)... thus, no data would ever be used because the phone would never connect to a data network.
Do the WP7 network/connection settings allow you to do something like that? And, are you able to access these settings before putting a SIM card in the phone?
- Also, I have seen a few threads mention that there is a button/option that disables network data... if so, does this actually work? As in, does it completely shut off access to the data network?
Obviously, I would prefer to create the "dummy" network if possible, because I know that it will NEVER connect (I used this method on a Touch Pro 2; it would also say the network was "offline" whenever I accidentally tried to use the internet or something without the WIFI being on; this is exactly what I want).
Thank you for your help. Like I said, I don't have a WP7 device yet (which is why I'm asking these questions)... but I hope to get one soon if the data connection can be disabled.
Menu>Settings>Mobile network>Transmission data (or Data transmission, I have Polish language and I don't know how that called in English ROM) - off.
^ Thank you for that... so that confirms that there is a button/option to turn the data off.
But, I am still wondering if there is a way to create a network that the phone will never connect to... in WM6.5, you could choose whether the phone connected to the "Internet", "Work", etc. Basically, you would just change the settings in the "Work" connection to be something that would never connect (a "dummy" network), set the "Work" as the default, and then you were set.
Is this possible with a standard/stock WP7 phone?
No
Sent from my HD7 using Board Express

Categories

Resources